Error status of Message on the Brother MFC-6800(with Windows 8) printer

Similar Questions

• Cannot print to the Brother MFC-J470DW with El Capitan

  I've read through all the messages about printer with El Capitan + Mac problems, but none of the solutions seem to work for me?  I deleted the printer files and reinstalled.  I have reset the printer system.  With the computer has restarted, etc.  It drives me crazy... I work from home and be able to print without spend 2 hours each day playing with it so he can print once and then not work again.   All the solutions experts out there?  I have to go out and buy a windows computer?

  Have you downloaded and installed this Apple Support downloads

  Brother 3.0 for OS X printer drivers

  or visit this page on the Brother site.

  http://support.brother.com/g/b/downloadlist.aspx?c=us & lang = to & Prod = mfcj470dw_us _ eu_as & os = 10018

• Is the corded handset on the Brother MFC-795CW & it can record calls?

  Printer multifunction Brother MFC-795CW.

  Brother MFC-795CW all-in-one printer - is the combined connection hard wired or plug wire & can record the calls of the machine?

  Here you can find the characteristics of devices: http://www.brother-usa.com/mfc/modeldetail.aspx?PRODUCTID=MFC795CW

• All-in-one Brother MFC-7360N blocks Windows 8

  I bought a laptop Dell with Windows 8 (64-bit). I also installed all the required drivers recommended by Windows and his brother in order to make this printer all-in-one Brother (MFC-7360N) to work.

  However, as soon as I plug the USB in, this face sad:(apparaît et mes fenêtres commence à redémarrer.) If it helps, I see this error message "usbxhci.sys" (with an X) as well as the sad smiley.

  I googled and was on the phone with the support of brother for hours. There is still no solution. I also found this page - http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/ProductDetailsViewer?Name=Brother+MFC-7360N+All-in-One+Printer&vendor=Brother&Locale=1033&BreadCrumbPath=Printers+%26+scanners | Multifunction | & Type = material & tempOsid = win8 -stating that the two are compatible and there is no action required. Judging by the vote "Not compatible" 5-1 on the page, apparently someone is not telling the truth...

  Suggestions and or solutions would be greatly appreciated.

  CJ

  The minidump files showed a DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1) referring to the USBXHCI. SYS:

  BUCKET_ID: AV_USBXHCI! Endpoint_InitializeTransferRing

  The same error was reported in the following thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/trying-to-install-a-Brother-MFC-7360N-laser/100a87dc-86a1-4ee2-8452-d8aa9cf5ccc8?msgId=8af0328e-E447-4029-9E88-31cb6037a346

  Although the same printer was involved the problem can not be directly connected to the printer.

  Did you install any driver USB 3.0 third party such as the Intel 3.0 driver?

  Also, two of the minidump you files provided involved components McAfee and you can run a version of McAfee that is not compatible with Windows 8.

  What I would say is to uninstall McAfee and see if the problem resolves.

  For security software consider using just the Windows anti-virus and integrated firewall.

  Moreover, what Cyberlink software? Power2Go is installed?

• XP to Vista upgrade, the message that Vista is not compatible with Windows XP

  Original title: Upgrade Vista XP

  I tried to update my windows XP to Windows Vista and get the error message that Vista is not compatible with Windows XP. It is an original cd of dell that I got years ago and have not upgraded I liked XP. Any thoughts on patches or fixes for this?

  Hi Dennis,

  The upgrade to Windows Vista from Windows XP requires some preconditions for the computer that you have this problem in. This article treats all these prerequisites. I suggest you read the information in this article and see that if your situation meets all the conditions required or not, here is the link:

  http://Windows.Microsoft.com/en-us/Windows/installing-reinstalling-Windows#1TC=Windows-Vista

  Please check all of the information provided in this article carefully. Keep us up-to-date with the status of your side, we will be happy to be of further assistance.

• Error code 8007371B when installing the update of security for Windows Vista (KB978886)

  Update for Windows Vista (KB978886) security fails to install on my computer and I get this error code: 8007371B.

  I use an Acer with Windows Vista Home Edition SP 2.

  Can someone help me?

  Thanks in advance

  Title of contempt, but other things that you can try are:

  http://support.Microsoft.com/kb/947366#resolution3

  http://support.Microsoft.com/kb/947366#resolution4

  Have you tried the standalone version of the software update and run the tool. Now it's time to check if something is the cause of the problem for example security applications or other programs.

  TaurArian [MVP] 2005-2011 - Update Services

• Looking for ways to solve the following problems of these messages: "check the temp environment variable. "Unable to print the document. "You don't have permission to save in this location."

  Looking for ways to solve the following problems of these messages: "check the temp environment variable. "Unable to print the document. "You don't have permission to save in this location."

  Hi Michael,

  Please follow the link and see the issue:

  Cannot print or preview before printing a Web page in Internet Explorer: http://support.Microsoft.com/kb/973479

  If the problem is specific to MS Word, then I suggest you to post the same question in the forums of MS Office for assistance.

  Microsoft Office Forum:

  http://answers.Microsoft.com/en-us/Office/Forum/Word

  I hope this helps.

• Why is compatible windows 7 with Medal of honor alied assualt and assualt pacifc and airborne, but not with Medal of Honor 10eanniversaire Bundle. and have xp and windows 7 can I play and keep the games on xp with windows 7 is installed

  Why is compatible windows 7 with Medal of honor alied assualt and assualt pacifc and airborne, but not with Medal of Honor 10eanniversaire Bundle. and have xp and windows 7 can I play and keep the games on xp with windows 7 is installed

  Hello
  Welcome to the Microsoft answers site.
   
  By design, the game is not compatible with windows7.
   
  You can also check with the manufacturer of game for any version upgrade of this game, which could be compatible with windows7.

  Yes, if you have the dual operating system on your computer, you can play and record games on xp, start the computer in Xp and you can play the game.

  I also invite you to visit this link to learn more about running the old programs/games in xp or vista compatibility mode.

  Here is the link:
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Let us know if you have any questions.

  Thank you and best regards,
  Azam - Microsoft technical support.

• I deleted all the games that come with Windows XP including Solitaire. How can I get that back?

  I deleted all the games that come with Windows XP including Solitaire.  How can I get that back?

  Hi andypily1,

  Welcome to the Microsoft Answers community.

  Try the steps one by one and check below.

  STEP 1:
  How do I add or remove games in Windows XP
  http://support.Microsoft.com/kb/307768
   
  
  STEP 2:
  In most cases if the games are deleted from the computer files will remain on the computer.

  I suggest that you are looking for game files in the system32 folder.

  Later, click on Start menu click on run and type c:\\windows\system32 in the following search of the window for the file of games like free cell. If you get the files in the system32 folder then copy the file to c:\\program files\start menu\ later in the game folder.

  STEP 3:
  If fails it above steps, try a system restore to the point when the game was available on the computer.
   
  See the link below to learn how to perform the system restore.

  How to restore Windows XP to a previous state
  http://support.Microsoft.com/kb/306084

  Hope this information is useful.
  Let me know if it worked.
   
  Thank you, and in what concerns:
  Umesh P - Microsoft Support

• Do I need a firewall if I have installed the basics of microsoft with windows vista x 32 Security.

  Original title: am running Vista x 32

  Do I need a firewall if I have installed the basics of microsoft with windows vista x 32 Security. If I do how can I download the microsoft firewall?

  Your quick response would be appreciated
  Edwardini

  Windows Firewall is delivered with and is part of the Vista operating system.
  You already have it and, therefore, you do not need, or you, can download another Windows Firewall.

  Microsoft Security Essentials (MSE) will close your Windows Defender because MSE has its own advocate and performance 2 defenders in the same machine allows to create conflict, not to mention redundant.

• Lost all the games that come with windows Vista.

  Original title: IE windows games: hearts, spider and others

  I lost all the games that came with windows vista and would like to know how to get them back is to say: hearts, spider, scanning of the spirit and others

  Hi JosephAdams,

  Did you the latest changes on the system?

  I suggest that you turn off the games feature in windows vista and re activate and check if it works.

  a. click the Start button, select Control Panel, click programs and then click turn on turn Windows features on or off. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  b. to turn a Windows feature, select the check box next to the set. To turn a Windows feature off, clear the check box.

  c. click OK.

  First you can disable the function of games using the method above restart the computer and turn on the games feature and check if it works.

  For more information, you can consult the following articles and see if it helps.

  Turn on or off Windows features

  Where are my games?

  Hope this information is useful.

• The use of devices with Windows 8

  Hi all

  I saw many problems for people with questions about the use of Bluetooth with Windows 8 devices, especially after the upgrade.

  Take a look at this document, which covers:

  I hope that this document provides assistance.

  Good luck!

• Are the standard gadgets included with Windows 7 safe?

  Microsoft no longer supports the gadget gallery, and warns that the gadgets can infect your system. But the standard gadgets included with software pre-installed Windows 7 oem safe?

  Hi jammajdad,

  Thanks for posting your query in the Microsoft community!

  I understand that you want to know the standard gadgets included in Windows 7 are safe. I will try to help you with this.

  Some of the gadgets that come with Windows 7 are calendar, clock, weather, flow of titles, slide show and teasing. These are very safe, because it comes preinstalled with the operating system.

  See also:

  Gadgets Google Desktop (overview)
  http://Windows.Microsoft.com/en-us/Windows7/desktop-gadgets-overview

  Gadgets
  http://Windows.Microsoft.com/en-us/Windows7/products/features/gadgets
   
   
  Please mail us if you have more question about Microsoft Windows.

• Does the m - 105 palm with Windows 7 64-bit work?

  What are the hardware/software compatible with Windows 7 64 bit?  Try to reinstall the palm for the new cfomputer, but not sure this is possible. No COM port, etc.

  Thank you!

  Just FYI... in the years of the computer, three years is considered a lifetime.  12 years... is pretty much history.  :-)  But Kudos to you for those taking good care of your technology!

• Problem with the Brother MFC 8950DW printer.

  I tried to install the software for a printer Brother MFC 8950 DW.  Whenever I get a message that the driver is not available.  I received an error 0x000003eb and cannot install the printer.

  Has anyone else encountered this problem?  If so, how do you fix?

  Hello
              
  Check with the support of brother, their documentation online and drivers. As the brother of OEM
  is responsible for the good operation of the printer and their drivers provided.

  Good luck, you need to update or reinstall the latest driver.

  Brother - MFC 8950DW - drivers<- set="" to="" your="" version="" of="">
  http://support.brother.com/g/b/downloadtop.aspx?c=us&lang=en&prod=mfc8950dw_all

  Brother - Support
  http://www.brother-USA.com/support/

  Brother - Download graphics driver
  http://www.brother-USA.com/LP/windows7compatibility.aspx

  ================================================

  The main issue is probably the drivers, but these can help:

  Windows 8/8.1 - Fix printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Windows 8/8.1 - How to solve printing problems in Windows
  http://Windows.Microsoft.com/en-us/Windows-8/How-to-solve-printing-problems

  Windows 8/8.1 - install a printer
  http://Windows.Microsoft.com/en-us/Windows-8/install-a-printer

  Windows 8/8.1 - find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows-8/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">