Error: "SWF failed to compile.

Similar Questions

• Failed to compile swf CP8

  Hello

  I am trying to publish or preview a course of CP8, but I still have the same error message "failed to compile swf.

  I don't have special characters... I can't find the problem...

  Help!

  Thank you

  Try disabling all the compression options in the preferences > project.  The Advanced Compression setting is often problematic.

  If this does not resolve the issue, save a copy of the project and start to hide groups of slides and republish each time until it seems to work.  Then hide the slides in THIS group to find out who could be shifted upward in the process.

  If this does not work, remove all the measures put forward.

  If this does not work, copy all the slides in a new project shell and republish.

  If this does not work, your project is probably toast.

• Failed to compile SWF - pre-test

  All the

  I get a message failed to compile SWF.  This happens when I add a pre-test to my Captivate file which has a graduated test.  Everything works fine until I have add the pre-test.  Once I added the pre-test, I get the error even if I delete all the slides except 1 slide of simple text.  Can someone help me understand what is happening.  You can download versions of the Captivate file at the link below.  One is the file before the pre-test is added and one is, after the pre-test is added.  So frustrated.

  Download your files
  Please use the following identification number when prompted: 575874

  
  

  
  

  Hi Dan,.

  I see that you have applied some widget in Captivate PlayBar. You can try to remove it and check again?

  Regrads,

  MILIN

• LOOK for iOS, 'HelloWorld' fails to compile

  Flash CS 5.5 v11.5.1.349

  Windows 7 Professional SP 1

  I get the compile error when you post AIR for iOS (Flash Cs 5.5). It does not, what is wrong, said simply that he was unable to compile the files.

  "Error creating files.
  Failed to compile... »

  The application is simple - is the example Hello World in the help section, but it still does not work. (Of course, I have all the necessary certificates created.) What is even more interesting, the same fla without changing file compiles well on Flash CS5.5 my colleague, even if (11.5.1.349) versions are identical.

  The only time I get that error is when a file is in use (or Windows thinks it's) because he has started or selected in Windows Explorer, then you will fail to compile the SWF itself. Otherwise, do not hit browse and specifically defining the path to export product also the error for me.

  Is generated all SWF? If so, it has a size (> 0Ko)?

  One thing you should definitely do more than overlay latest Adobe Flash CS5.5 AIR. This will ensure that you have all the latest patches and updates to AIR for iOS. This may solve your problem.

  Download the SDK here:

  http://www.Adobe.com/devnet/air/air-SDK-download.html

  Instructions on layering (disregard the version number difference, simply use the correct number of AIR, you're coming to overlap instead, from 13 to 16):

  http://helpx.Adobe.com/x-productkb/multi/overlay-air-SDK-Flash-Professional.html

  I also recommend to download and update Flash CS5.5 to have the latest version of Flash Player. This is so you can target and test using the version 16 (11.3 flash drive). Here is the download page for the Flash Player the latest debuggers, playerglobal.swc, etc.. :

  http://www.Adobe.com/support/flashplayer/downloads.html

  There is not a lot of information out there on how to install it in Flash CS5.5 but I'll give you the general jist:

  -Close Flash Pro

  -Install 2 browser plugins (activeX and plugin according to the debuggers)

  -Download the "projector content Debugger" and crush the FlashPlayerDebugger.exe in this default path: C:\Program Files (x 86) \Adobe\Adobe Flash CS5.5\Players\Debug

  -Download the "projector" and crush the FlashPlayer.exe in this default path: C:\Program Files (x 86) \Adobe\Adobe Flash CS5.5\Players\Release

  -Download the playerglobal.swc (make sure that it has named exactly that), then navigate to the default path: C:\Program Files (x 86) \Adobe\Adobe Flash CS5.5\Common\Configuration\ActionScript 3.0

  -Create a folder in this path called "FP11.3" and place the playerglobal.swc in there.

  -Navigate to the default folder C:\Program Files (x 86) \Adobe\Adobe Flash CS5.5\Common\Configuration\Players

  -Duplicate the last FlashPlayer1x_x.xml file and name it FlashPlayer11_3.xml.

  -Change the file. Change the lines accordingly, the parts in bold are the changes:

  Flash Player 11.3

  Now you can restart flash and your target publication, you should see Flash Player 11.3 as target.

  To check 11.3 is installed correctly open a new AS3 document and paste this code and then run it using the DEBUGGER.

  Do not simply press CTRL +, it is just a player. Use CTRL + SHIFT + ENTER. You should now see the version followed 11.

  Here is the script code of the simple framework:

  import flash.system.Capabilities;

  trace (Capabilities.version);

  For using the debugger (CTRL + SHIFT + ENTER) I see: WIN 11,3,300,257

  For me using just came out (CTRL + ENTER): WIN 10,2,153,2

• Age of Empires 3 error 0003: could not compile the file 'aiLoaderStandard.xs '.

  People,

  I bought the version of digital download of age of Empire 3 full of steam for installation on my laptop Windows 7 Home Premium. Already, I have the CD versions of all games on my desk, but was also able to install it on my desktop in my Steam account.

  In trying to play the AOE3 game on my laptop, I get the following error:

  00:00:00 (0) xs: error 0003 could not compile the file 'aiLoaderStandard.xs '.

  The net effect of this error is that when I run the game, the AI does nothing. He can place a hometown and a Explorer and/or civil, but they do nothing. I tried to uninstall and reinstall the game several times. I also applied all the patches I could find, to include the last being.

  In addition, when you try to play the TAD version, I do not get the aiLoaderStandard.xs error, but it fails to load the map and never even begins.

  Help, please!

  Hello

  You can view the proposal contained in the link, and check:
  http://Forum.AgeCommunity.com/forums/thread/480165.aspx

  If the problem persists, you can create a new thread in the forum for better support.

• Setup Mac os 10.11.5 error - "audit failed."

  Hi all.

  I saw the different answers to similar questions for older versions of Mac Os X 10.11, but apparently nothing that relates to my problem or who has been helpful so far.

  I have a Macbook Pro, end 2012. Several attempts to update to the latest Mac Os (10.11.5) on the App Store with "verification failed" failed when starting the installation after the download. I quote below a part of the install.log file that seems to be relevant, but which I can't understand what is happening. Please note that the installation even worked on my new Macbook Pro, mid-2015; the failing machine is the previous I used, which I use now of the House. (A detail that may be relevant to what I've read previous users having similar problems, is without doubt, I've improved my 2015 my office network McP while I use my house for the McP 2012 default ADSL).

  Help would be greatly appreciated.

  Excerpt from /var/log/install.log:

  May 21 08:17:20 oldPaoloPro system_installd [651]: installed: from

  May 21 08:17:20 oldPaoloPro system_installd [651]: installed: uid = 0 euid = 0

  May 21 08:17:20 oldPaoloPro system_installd [651]: PackageKit: adding customer PKInstallDaemonClient pid = 248, uid = 200 (/ System/Library/CoreServices/Software Update.app/Contents/Resources/softwareupdated)

  May 21 08:17:21 oldPaoloPro softwareupdated [248]: PackageKit: installation of queue with specified to the customer quality of service (utility)

  May 21 08:17:21 oldPaoloPro system_installd [651]: PackageKit:-----Begin installation -

  May 21 08:17:21 oldPaoloPro system_installd [651]: PackageKit: request = PKInstallRequest < 2 packages, destination = / >

  May 21 08:17:21 oldPaoloPro system_installd [651]: PackageKit: packages =)

  "PKLeopardPackage <file:///Library/Updates/031-49587/OSXUpd10.11.5.pkg>,"

  "PKLeopardPackage <file:///Library/Updates/031-49587/FirmwareUpdate.pkg>.

  )

  May 21 08:17:24 oldPaoloPro system_installd [651]: PackageKit: will be based on the obsolete reception for package identifier com.apple.update.firmwareupdate (path prefix = /)

  May 21 08:17:24 oldPaoloPro system_installd [651]: PackageKit: install failed: error Domain = PKInstallErrorDomain Code = 110 "an error occurred during extraction of the files in the"OSXUpd10.11.5.pkg"package". UserInfo = {NSUnderlyingError = 0x7f84154f3dc0 {error Domain = PKXARArchiveErrorDomain Code = 101 "archive check failed ' UserInfo = {URL =file:///Library/Updates/031-49587/OSXUpd10.11.5.pkg#Scripts, NSFileOwnerAccountID = 0, NSFileHFSTypeCode = 0, NSFileSystemFileNumber = 7719344, NSFileExtensionHidden = false, NSFileSystemNumber = 16777220, NSFileSize = 628141500, NSFileGroupOwnerAccountID = 0, NSFileOwnerAccountName = root, NSFilePosixPermissions = 420, NSFileHFSCreatorCode = 0, NSFileCreationDate = 2016-05-21 05:27:19 + 0000, NSFileType = NSFileTypeRegular, NSFileGroupOwnerAccountName = wheel, NSFileReferenceCount = 1, NSFileModificationDate = 2016-05-21 06:16:13 + 0000, NSLocalizedDescription = archive check failed}}, URL =file:///Library/Updates/031-49587/OSXUpd10.11.5.pkg PKInstallPackageIdentifier =} {com.apple.pkg.update.os.10.11.5.15F34, NSLocalizedDescription = an error occurred during extraction of the files in the package "OSXUpd10.11.5.pkg".} {

  NSLocalizedDescription = "an error occurred during extraction of files from package \U201cOSXUpd10.11.5.pkg\U201d.";

  URL = "file:///Library/Updates/031-49587/OSXUpd10.11.5.pkg";

  NSUnderlyingError = 'Domain = PKXARArchiveErrorDomain Code = 101 \"archive error check failed\' UserInfo = {URL =file:///Library/Updates/031-49587/OSXUpd10.11.5.pkg#Scripts, NSFileOwnerAccountID = 0, NSFileHFSTypeCode = 0, NSFileSystemFileNumber = 7719344, NSFileExtensionHidden = false, NSFileSystemNumber = 16777220, NSFileSize = 628141500, NSFileGroupOwnerAccountID = 0, NSFileOwnerAccountName = root, NSFilePosixPermissions = 420, NSFileHFSCreatorCode = 0, NSFileCreationDate = 2016-05-21 05:27:19 + 0000, NSFileType = NSFileTypeRegular, NSFileGroupOwnerAccountName = wheel, NSFileReferenceCount = 1, NSFileModificationDate = 2016-05-21 06:16:13 + 0000, NSLocalizedDescription = archive check failed}";

  PKInstallPackageIdentifier = "com.apple.pkg.update.os.10.11.5.15F34";

  }

  May 21 08:17:24 oldPaoloPro system_installd [651]: PackageKit: runs the inactive tasks

  May 21 08:17:24 oldPaoloPro system_installd [651]: PackageKit: customer withdrawal PKInstallDaemonClient pid = 248, uid = 200 (/ System/Library/CoreServices/Software Update.app/Contents/Resources/softwareupdated)

  May 21 08:17:24 oldPaoloPro system_installd [651]: PackageKit: done with sandbox removals

  May 21 08:17:24 oldPaoloPro softwareupdated [248]: SoftwareUpdate: error extraction 031-49587 (reset for error status to allow retry download) installation: error Domain = SUErrorDomain Code = 311 "" OS X El Capitan Update"could not be verified." UserInfo = {SUErrorUpdateTitle = update of El Capitan OS X, SUErrorUpdateProductKey = 031-49587, NSLocalizedDescription = "OS X El Capitan Update" could not be verified.}

  I don't know why you are having this problem.

  I suggest that you can benefit from the COMBO (combination) update download and use:

  Download update of OS X El Capitan 10.11.5 Combo

  (Sorry, but it's a very big download - 1.5 GB)

• Satellite 1700-300: Win ME - invalid system disk - ERROR F3D failed

  Hello

  I have a Toshiba Satellite 1700-300 on windows Millennium Edition. Haven't used for a few years, but when I'm past it the other day the screen says: invalid system disk. I put in my laptop recovery disk, but he cut in halfway through with the message: ERROR F3D failed.

  Not really sure what I'm doing and really can't afford a new!

  Help would be thank you very much!

  Nice discussion on this error, you can find on http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=1255

  To be honest, I also think that there is a problem with the HARD drive.

• Access to the Windows Update site 0x8024402C error code failed?

  Access to the Windows Update site 0x8024402C error code failed? Regds, 'a journey of a thousand miles begins with a first step."

  Resolution: 0x8024402C error Code

  Method 1: Remove the characters from the list of exceptions to the proxy and then clear the proxy cache to do this, follow these steps, as appropriate for the operating system that you are running. Windows 2000, Windows XP and Windows Server 2003

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the menu is not available in the Internet Explorer window, press the ALT on the keyboard to display the menu.

  3. Click the Connections tab and click LAN settings, and then click Advanced.
  4. Remove all the entries in the Exceptions section, and then click OK.
  5. Close Internet Explorer.
  6. Click Start, run, type cmd, and then click OK.
  7. Type the following commands. Press ENTER after each command.
     • proxycfg d
     • net stop wuauserv
     • net start wuauserv
  8. Try again to install updates.

  Windows Vista and Windows Server 2008

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the menu is not available in the Internet Explorer window, press the ALT on the keyboard to display the menu.

  3. On the Connections tab, click LAN settings, and then click Advanced.
  4. Remove all the entries in the Exceptions section, and then click OK.
  5. Close Internet Explorer.
  6. Click Start
     The collapse of this image enlarge this image

     

     , and then type cmd in the box start the search.

  7. In the list of search results, right-click on Cmd.exe, and then click Run as administrator.
     The collapse of this image enlarge this image

     

     If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  8. Type the following commands. Press ENTER after each command.
     • netsh winhttp reset proxy
     • net stop wuauserv
     • net start wuauserv
  9. Try again to install updates.
   

  Method 2: Enable the option "Automatically detect connection settings" in Internet Explorer to do this, follow these steps:

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the Tools menu is not available in Internet Explorer, press the ALT key to display the menu.

  3. On the Connections tab, click LAN settings.
  4. Click to select her automatically detect settings check box, and then click OK.
  5. Try to install updates again.

  Kind regards
  Sohail Patel Regds, 'a journey of a thousand miles begins with a first step."

• Update error. Failed to check the updates. Event ID 1001

  Update error. Failed to check the updates. I rebooted the PC and the Windows Update service (it is activated and automatic when you restart).  Is there an event ID 1001 in the event log that shows when I try to run WinUpdate.

  Can anyone help solve this?

  Thank you.

  How to reset windows update components

  http://support.Microsoft.com/kb/971058

• Call of Duty World at War: Error 1628: failed to complete Installation

  I get a "Error 1628: failed to complete Installation" when installing under Windows 7.
  I open the DVD and right click on Setup.exe to run as administrator.

  I found some info on the internet to try to go in administrative tools - local security policy - Software Restriction policies - updated in application and verification of all users except thing administrators, but nothing helped.

  I remember when installing on a previous Vista machine, I had the same problem, but I don't remember what I did, but there is obviously some kind of security problem.

  I have install from (only) on the machine and there of course administrator rights. The account has no password. I tried to create an other administrator account that I gave a password and tried to install it from her, but that didn't help either.

  I also tried the following, after a suggestion from Activision:

  1 create a folder "test" on your desktop.
  2. go to the "My Computer" screen
  3. right click on the DVD drive located in the game disc, and select "explore".
  4. copy all the files and folders that you see here and paste in your 'test' folder on your desktop.

  The copy process must begin now. If the game has copied correctly for you, then try to install the game from the "setup.exe" file in your copied folder.

  This did not help either.

  Help, please!

  Hi Bengt,

  We are pleased to hear that you were able to solve the problem.  Do not hesitate to contact us, in the case where you face other problems in the future.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Update KB948465 8024200d error code failed.

  Windows Update KB948465 8024200d error code failed.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  [0 x Error 80070002; 0x8007000D; 0 x 80073712; 0x800B0100; & 0x8024200D]
  http://support.Microsoft.com/kb/947366

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Run-time error '372': failed to load control 'ctlRowInput' while trying to run "Nexus 2.0."

  Title: Runtime error ' 372': failed to load control 'ctlRowInput' of.  Your version is perhaps obsolete.  Make sure you use the version of the control that was provided with the application.

  I tried to download an updated version of the fire behavior prediction software, "Nexus 2.0."  The program downloaded straight, but the software does not work.

  Hello

  -You are aware of any changes made on the computer before this problem?
   
  Method 1: I suggest you to uninstall and reinstall the program in clean boot mode, and check if the problem persists. A clean boot to check if startup item or services to third-party application is causing this issue.
  You can read the following article to configure the computer to boot:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the troubleshooting steps, see the link to start to set up the computer in normal clean startup mode.

  Method 2: I suggest you to contact Nexus support for assistance.
  http://www.fire.org/index.php?option=com_frontpage&Itemid=1
   
  Hope this information helps.

• When you try to install PDF Creator, I get an error message: "error 5 - failed to create the directory, access is denied."

  access denied for the creation of a directory

  When you try to install PDF Creator, I get an error message: "error 5 - failed to create the directory, access is denied."  How can I fix this?

  When you try to install PDF Creator, I get an error message: "error 5 - failed to create the directory, access is denied."  How can I fix this?

  Only when you try to install this application?

  What about BullZIP PDF Printer?

  (You can uninstall - trying to figure out if it's a problem of Windows or the question of enforcement.)

• You try to start a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a non-Microsoft service, contact the service provider

  Ideas:

  • You have problems with programs
  • ETrying to launch a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a Microsoft service, contact the service provider and refer to the specific service-6000004 error code "... I contacted the people at VMware they say it's a problem with Windows Vista..." IAM confused pls help... .rror messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi sanjeevkode,

  Thank you for visiting the website of Microsoft Windows Vista Community.  As the question you posted typically associated with third party software / application that has its own way of program codes and call the corresponding system resources when installing and running. Therefore, I also suggest you to join the VMware Forums for the best support.

  VMware communities: http://communities.vmware.com/home.jspa

  In the meantime I suggest you try these options / methods

  IMPORTANT NOTE: Microsoft provides this information as a convenience to you. Proposed changes could lead to serious problems. Microsoft cannot guarantee that problems would be solved as a result of the suggestions. Changes to settings are at your own risk.

  Option 1: If you go to computer management, and then to the list of Services and find the VMware authorization Service, it appears as stopped? If so, you need to start

  Option 2: Try logging on as an administrator Local host during installation first workstation, rather than you connect with a domain ID

  Option 3: The question can be caused also by your security program such an antivirus or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must enable security programs new that had disabled you

  Option 4: The problem could be linked to a local or domain group policy. Make sure that the local account is defined as 'local user __vmware_user__' in the local Administrators group and the permissions of "Log on locally" and "Log on as a service.

  The two parameters are available in the "* Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment *" branch of domain group policy or local.

  Let me know if it worked.
  Hope it will be useful.

  Thank you and best regards,
  Vijay K - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Fix it fails Center with the error: unable to get the catalog of the troubleshooter. Error MatsGetSapCatalog failed

  Original title: Fix it center fails.

  Difficulty Center fails with the error:
  Unable to get the catalog of the troubleshooter. Error MatsGetSapCatalog failed
  I can't find the url of re - download.
  It doesn't seem to be at the Download Center.
  Thank you
  Frank C

  Vista Ultimate 64 bit sp2

  

  CF. http://answers.microsoft.com/en-us/protect/forum/mse-protect_scanning/scanning-engine-has-stopped-responding/e0f84bec-2555-4279-bfb7-aff691b8ba8d