ERROR to the A10 (000005aa) modem

Similar Questions

• Error A10 AMR Modem satellite

  Hello
  I use a laptop Toshiba Satellite A10. I came across a problem a few days back when I tried to connect to the internet through modem dialup.

  Modem has dialed the number, but after checking the user name and password, there was an error describing "cannot connect because a on your system design no function" under the title of "the network protocol configuration error '.

  Could someone guide me how can I fix these settings?

  Kind regards

  Faiza

  If I were you I would try following:

  Remove the connection distance of your network connections and remove your modem from the hardware Manager. Then restart your operating system and let windows reinstall the modem device.

  Create a connection by modem to the modem installed fresh and that's it.

  Please give some feedback if it didn t work.

  Welcome them

• Satellite C660D - error 651 attempts to connect to the internet via modem

  Hello

  I'm so stupid with this stuff so please make all responses for a 3 year old can understand.

  The problem - since a few years, I used a desktop computer and connected to the internet via modem wide empty tape and USB connection. Last week bought a Satellite C660D installed Windows 7 os provided and tried to connect with my modem, but failed miserably.

  I get the error message 651 but do not understand why.
  I use wired ethernet (because my friend does on their laptop) and tried the cable on their system, and it worked very well, so I don't think it's that.

  If someone is kind enough to explain what I do, I'll be able to keep this computer connected to the internet with usb and connect the laptop with an ethernet at the same time, so I can read the instructions while I go or I'll have to print the instructions and disconnect the Office before retrying the laptop? Yes, I'm dumb and I'm not even blonde, lol

  Thanks in advance for those who have the patience to try to help me.

  Hello

  Don t think that it s question computer laptop since many different users of the internet have reported the same error message with different but with pre-installed computers Win 7.

  There is no one-size-fits-all solution for this
  See this page:
  http://techietalkz.com/2009/10/29/error-651-in-Windows-7-a-killer-for-Internet-ConnectionVPN/

  There are several tricks to get this fixed an error
  For example: remove the Microsoft Virtual PC 2007 or disabling IPv6 for your connection.

  You will need to check the unique proposals would be interesting to know what will arrange in your case

• When I try to connect to the internet via the usb cricket modem thing, I get an error entry ras error creat/change also error 1068

  Original title: new laptop user

  I recently got a laptop EEE. When I try to connect to the internet via the usb cricket modem thing, I get an error ras entry creat/change. I tried to set the automatic start, but when I click the button start I get an error 1068. Any help?

  Hello

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  "Error 1058" error message appears when a service stops unexpectedly

  http://support.Microsoft.com/kb/241584

  Also refer to this article and check if it helps:

  "Error 1068" error message when you try to enable Internet connection sharing

  http://support.Microsoft.com/kb/827328

  Note: Also valid for Windows Vista

• After three days of my 3g modem works fine, I can't access the internet more because of what follows: "Error 734: the PPP Link Control Protocol was stopped.

  Last week for mobile connection, I bought a 3G modem on my laptop. After three days, works very well, I can't access the internet more because of what follows: "Error 734: the PPP Link Control Protocol was stopped. It occurs when I try to establish a Dial-Up connection.

  I searched the Internet and found a section of troubleshooting on the Microsoft Web site. However, although I have followed all the steps, the error continues. I've already uninstalled and again installed the program, does not. I use Windows Vista Home Premium.

  What should I do now?

  original title: 3 G Modem

  Hello

  I suggest you to contact your internet service provider for assistance.

• Not able to connect to the server with modem 56 k

  I try to connect my Tecra via modem 56 k Internet.
  Also, I tried with another computer laptop with the same details and that worked.
  But when I try it on my Tecra I get an error that is not able to connect to the server.

  So I think that it is a parameter that is not defined correctly for the modem.
  (If you compare it to another laptop all parameters are the same as windows).

  Thanks in advance,

  Theo

  Hello Theo

  Please remove the Dial-up connections all created and after that, remove the modem from Device Manager. Restart the device and initially ensure that the modem is properly configured (query modem Agic under Diagnostics). I put t know which Tecra you have, but many of them have preinstalled TOSHIBA PC Diagnostic Tool. With this tool, you can see all the equipment including modem.

  After having it set up new Dial-up connection and check the functionality. Be sure to wait for the tone option is disabled.

• Errors in the log event 20035, 7023, 7035 7036 - can not get online with dial-up or broadband addapter

  Original title: errors in the event log 20035, 7023, 7035, 7036

  Can't get online with dial-up or actions addapter. verified that newspaper and got codes of Thies. They have to do with rasman and the service control manager. I think I need to reset some how back to the line. Thanks for the help.

  Hello

  ·        What is the exact error message you get when you try to connect to the network (the error that comes up on the screen)?

  ·        Who is the manufacturer of the system and what is the model?

  ·        You are using an external modem or a modem internal?

  ·        If he external modem then who is the manufacturer of the modem and what is the model?

  I suggest you follow the steps mentioned in the article below.

  You cannot create a network connection after you restore Windows XP

  http://support.Microsoft.com/kb/329441

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• "Error 638: the remote server is unresponsive in a timely way", when I try to connect to the Internet.

  Title: "error 638: the remote server is unresponsive in a timely way." What in the world is that supposed to mean?

  I have known the above error (for 2 weeks now) whenever I try to connect to the internet via modem huawei e160. I have not installed any programs recently. I physically contacted my ISP and according to them, the modem works properly and that the problem is with my computer. A professional COMPUTER friend told me that he once experienced a similar problem and the solution in the end was re - install the operating system. I did as much with PC to get back that far. Someone please help coz it is a nightmare.

  I had the same problem. And just uncheck the 'Operator operator-assisted' Option on the "Advanced" tab in the window 'Manage settings of the map' did the job. Try it. You will surely succeed.

• Help me to solve the problem with modem hspa usb on Windows Vista and Windows 7

  Hi, I have a problem with my USB HSPA modem when I tried to install in my Windows Vista 64 - bit PC. Sometimes it's OK, but sometimes it has encountered an error trying to install it. After the installation of the almost complete progress, reports of windows as "Unknown material" or "driver is not found. Maybe after a few tries, I was able to install the modem. But later, its happened again. I take the modem at the other PC with XP, it is still OK, but it happened again with Windows 7 Ultimate 32-bit home version. so could you help me to fix it? is it a bug of Windows Vista and windows 7? Thank you very much

  Hello

  go to the website of modem manufacturers and look for the last vista and/or firmware for windows 7

• Want 4500: Connection error! The printer could not connect to the server

  Connection error! The printer could not connect to the server!

  Cannot set up eprint or update the driver. Ever been on the forums and do not understand what to do!

  I am successfully connected to my router and can print from my pc and my ipad with airprint.

  PC "will not find"the printer either for purposes of updating

  What I need to change the DNS. If so, I don't know what it is or how to do it!

  I went to the ip address but was unable to click on "wireless (802.11)", as recommended by a last response forum, as the next low 'status '.

  Can anyone help?

  Very frustrated customer :-(

  Hi @roopuk,

  Thanks for getting back to me.

  Sometimes the manual DNS 8.8.8.8 / 8.8.4.4 won't work in some configurations of network users.  Try the same steps as described above, but this time use the following parameters:

  Manual preferred DNS Server: 209.244.0.3
  Auxiliary manual DNS server: 209.244.0.4

  If you encounter the error, as before, we take our proverbial gloves off to try a more intensive troubleshooting.

  What is happening, it is that your router allows your printer connection that to enable wireless, but not a secondary connection to Web services.  In order to get these devices to 'shake hands' a second time, you may need to enable DMZ mode on your network through the router's built-in Web server.  HP does usually not this configuration for its customers as errors can cause serious network problems, but I can certainly post the info you need on your router or the ISP of the staff support company so that they could help you directly.

  Here is the information that you need for your provider service to open ports on your router/modem...

  -Multicast must be enabled
  -Hello enabled for AirPrint (relevant for iOS and Mac OS users)
  -Mac filtering should be disabled
  -Also, make sure that your router's firmware to date if
  necessary
  - The dmz on the router mode and turn it on to the printers IP address: _

  Ports to open are: Eprint and Apps

  Incoming Ports.

  UDP
  80
  443
  ------------------
  Outbound ports

  TCP
  5222
  5223
  -------------------
  Once they are open, you should have no problems connecting to services web eprint on your device.

  I would like to know how it works for you.

  Kind regards

• Error! The CPU was displayed by the operating system of Fords. Power off or reset the virtual machine

  Why when I try install Mac Os Yosemite in VMwareplayer when the virtual machine starts, I get this error:

  The CPU was displayed by the operating system of Fords. Power off or reset the virtual machine

  I have an AMD A10 processor

  VMware does not support the operation of Mac OS X in VMware Player/workstation!  Also, legally virtualisables versions of OS X running in a Virtual Machine can be done when done in the Apple brand hardware but when done while running under OS X, and for that, you need VMware Fusion not VMware Player/Workstation (or use ESX/ESXi on Apple brand hardware) you violate Apple's SLA for this product.  So any help can you provided for OS X in this use of the scenarios that it would violate the community VMware operating conditions to do.

• CoreTelephony error in trace file as a file for coretelephony tracing operation has failed, perhaps you need more disk space. Details "error opening the file/tmp/ct.shutdown, err = operation not permitted

  I got this error:

  "CoreTelephony Trace file error
  A file for CoreTelephony tracing operation failed, you might run out of disk space. Details "error opening the file/tmp/ct.shutdown, err = operation not permitted"

  I tried to solve it by searching for CoreTelephony errors. Could not resolve yet.
  Software does not, especially of photoshop...

  Any ideas?

  Same thing here, iMac with OS X 10.11.6. All started a couple days ago. Have not found any valid solution online yet, I tried rebooting in recovery mode and check disk, but it seems that everything is ok with the drives and permissions.

• Sync repeatedly presents the sync error, indicating the name/password of wrong account

  I get this error whenever I closed and reopened Firefox 38.0.1. I tried the solutions recommended in https://support.mozilla.org/en-US/questions/1063033, and they do not work. To enable synchronization, I must click on Preferences in the error (at the bottom of the window) and connect to synchronize manually. My FF is set up to always use the InPrivate browsing and do not save passwords. I use an automated password/login application called LastPass. However, the problem with the sync seems to have started in the last two weeks. The error repeats itself everytime I open a new window.

  Yes, it should work.

• Time Machine - there was an error preparing the Time Machine backup drive (could not mount the drive)

  I have a new HD but cannot set up encryption with system preferences. After ten minutes, I get the following error message:

  "There was an error preparing the Time Machine backup disk (disc name) - could not mount drive"

  Apparently, I need to set up the HD in this way:

  • If you are using an external drive connected to your Mac, use disk utility to make sure that your backup disk is formatted in HFS + extended (journaled) and is the partition type GUID Partition Table (GPT)

  It is not an option for the HFS + and so I used; OS x EXTENDED (journaled). GUID is ok.

  Can someone let me know what I need to do.

  Thank you

  Formatting: GUID Partition Table, OS X Extended (journaled).    (it is HFS +)

  For TimeMachine at best to a partition only.

  Do it again if necessary, then disconnect, reconnect, Start Time Machine preferences and "select disk".

• When I try to print anything in Firefox, email or the Internet, I get a message that says: error in the printer and nothing prints. Tried the stuff even printing from the Internet

  When I try to print anything in Firefox, email or the Internet, I get a message that says: error in the printer and nothing prints. Tried to print things even to Internet Explorer, it works fine.

  Hello bdoolen, please try to reset firefox and see if that can solve the problem...