Error A10 AMR Modem satellite

Similar Questions

• G550 - windows update error - Samsung CDMA Modem does not refresh

  I get an error of my modem update when you run windows update.

  How can I check which version of modem I have? sites with confidence update download?

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-800f020b

  Windows update has apparently no driver for your device.

  If you have the driver cd, use it or try to download the drivers from samsung

  http://download.CNET.com/Samsung-USB-modem/3000-2109_4-69494.html

• SP A10 - Error 633: the modem is not installed or configured for Dial-Up

  I've already reformatted the hard drive and the utility CD to reinstall the modem driver. Anyone got tips on how to solve the problem? An external modem would solve it?
  Either way, it's a satellite pro A10

  Hello

  If the HARD drive is formatted, use the recovery CD and reinstall the OS. After that, the modem must be recognized and properly installed. After that, configure Dial connection and check the modem. If the modem is not defective, it should work.

  The strange thing is that there is Error 633 which means: the port is already in use or is not configured for remote access remote calls.
  Please check this interesting site http://www.modemsite.com/56k/duns633.asp.
  If there is no success please write again.

  Good bye

• ERROR to the A10 (000005aa) modem

  My A10 won't let me use the AMR softmodem, sporadically. I get error 000005aa; the port is used by another device. There is no error in the Device Manager, it indicates that the modem is enabled and Ok no conflicts, but when the modem is queried using the diagnostics or attempt to dial a number I get the error.
  I ve re - install the driver of the CD of Toshiba and download and then install the driver from the support site, SEVERAL TIMES... Please, help me with original (and effective) solutions.
  There are a lot of people report this error to forums and there is not an answer in the official support page!
  Thanks in advance.

  [Edited by: admin]

  Hello

  I put t know whether my suggestion will be effective, but you can try it. Remove the modem from Device Manager and the dial-up connection. Restart the computer and configure the connection dial-up again.

  Good bye

• The country on Satellite A10 S203 modem settings

  Hello

  I have a Satellite A10 S203. I use my laptop for most in another country then my home country (Netherlands).
  I tried to connect to internet in Germany, and I couldn't change the country of the modem.

  Does anyone know so and so, how, to change the countrysetting of the modem of my A10 S203?

  GRTS Frank

  Hello

  Check this thread http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=2515&tstart=50 please

  If all goes well it will help you. If this isn't the case, please write again.

  Bye and good luck!

• Incompatibility of modem satellite A10

  Hello
  A few months ago, I bought the laptop satellite A10 in Australia. All the time I've been able to, I was very sattisfied with it.
  Now, when I moved to the Slovakia, I realized an incompatibility of modem dial-up, so the modem does not work in Slovak telecommunications network.
  Is it possible to install a firmware or to do something about this modem won't work in this area?
  Thanks for help

  Bishop

  Hello
  Checked the modem country settings in the control panel?

  Good bye

• Error blue screen on Satellite Pro A10

  Hello

  I try to help my in-laws with their SPA10 Pro Satellite. I had set this up for them a few months ago and it was working fine.
  Now it reboots about two seconds after the "use last good configuration ' screen etc, gets to the screen again then restarts immediately to infinity, never a break on error message for long enough to see what he says.
  I managed to boot from the Windows XP home and got disc with respect to the repair or continue with the installation screen. When I asked the computer don't either TI stuck on blue screen almost immediately. The error message is
  STOP: 0X000000C5 (0X00000002, 0X00000001, 0X00000000, 0X8082B98B)

  This is beyond my skill level, someone can help?
  Thank you

  Hello

  It is not easy to tell what the problem is here and what your in-laws have made with this device. Try to start the machine in safe mode by pressing F8 at the beginning upward. What unit starts check a bit if some strange software is installed.

  If there is no important data, I advise you to install the new OS. On this way, you will be sure that it is not because of software. If the problem persists then is the question is more complicated and there may be a hardware failure.

  At the moment I can't tell you more. Try to make the clean OS install and post again on the results.

• Replacement of modem satellite A10

  Hey, does anyone know what modem I'm supposed to get for my satelite a10 laptop PC series, it's totally broken not sure on what it is I need a card, as you can see I don't much about computers! Hey, I bought my laptop in New Zealand, now back in the United Kingdom do I need different drivers, can I install modem myself or I will have to look somewhere?

  Hello

  I agree with Flo
  Replacement of the modem is not very easy because this part is placed under the keyboard and you must open Notepad and remove the parts in the correct order.
  As suggested by Flo, please contact for more details. You can also order the internal modem of Toshiba service partner

  Good bye

• Need driver modem Satellite A10 - S167 PSA10U

  Need drivers for modem build in A10-S167 (PSA10U-01MJ67).
  Thank you!

  This laptop seems to be designed for the American market, and that is why you should visit the Toshiba driver page to download the compatible drivers:

  Check this site:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_modSel.jsp

  Goodbye :)

• Cannot ping localhost - error code 2 on Satellite Pro A200

  Dear COMPUTER gurus,

  I have a portable Satellite Pro A200.
  When I ping the local host, it says could not contact the pilot of intellectual property, error code 2.
  I tried to fix the winsock using articles from microsoft without success.

  Now I want to reapair the operating system using the recovery DVD.

  The recovery DVD has a repair option?
  If this isn't the case, anyone how to solve this problem?

  Help please!
  This is the result, I was using the pc diagnostic tool.

  Date 2008-08-30 01:47:12

  [Information on PC]
  Model name Satellite Pro A200
  Part number PSAF4U - 004 00D
  Serial number Y7312740Q
  Version of the OS Microsoft Windows XP Professional 5.1.2600 Service Pack 2
  BIOS Version 1.70
  Processor Intel (r) Core (TM) 2 Duo processor T7250 @ 2.00 GHz
  RAM 1024MB of physical memory
  Disk capacity hard 120,031,511,040 [bytes] 111.788 [GB]
  Capacity of the hard drive space free 92,245,069,824 [bytes] 85.910 [GB]
  Version Mobile Intel (r) 965 Express Chipset Family video = 6.14.10.4833
  Screen resolution 1280 x 768 Pixels
  Color quality, true color (32 bit)
  Audio version of Realtek High Definition Audio = 5.10.0.5440
  Network Marvell Yukon 88E8039 PCI-E Fast Ethernet Controller = 10.14.6.3 version = MAC address
  Intel (r) PRO/Wireless 3945ABG Network Connection version = 11.1.0.100 references MAC address =
  TOSHIBA Software Modem Modem version = 2.1.77.0
  Version of the IDE Device 1 TSSTcorp CDDVDW TS-L632H FW = TO01
  Interface IDE 2 no
  Interface IDE 3 no
  Interface IDE 4 no
  IDE Device 5 Hitachi HTS542512K9SA00
  Interface IDE 6 no
  Internet Explorer 7.0.5730.11

  Hello

  > I tried to fix the Winsock by using the Microsoft s articles with no luck
  I guess you're meaning to this MS article knowledge base:
  [How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP, and in Windows Vista: http://support.microsoft.com/kb/811259]

  Well, I searched a bit around and discovered that the solution described in article 811259 doesn t help in all cases

  So searched the Web of the 3rd party site and someone has suggested to try these tips.
  It s also from Microsoft:
  * [How to reset the Protocol Internet (TCP/IP) in Windows XP | http://support.microsoft.com/kb/299357] *.

  So check it out maybe it helps

  If not, then you may be forced to reinstall your operating system, because the repair option is not included in the Toshiba Recovery CD ;(

  Concerning

• Problems with ADSL modem Satellite A100 - isuser.dll might not be installed

  I tried in vain to install two different modems for ADSL on a Satellite A100 (running Vista).
  I started by uninstalling the drivers on the computer and then install the new 32-bit drivers from the manufacturers Web sites. (Tompson ST330 and Alcatel 330).

  Installation always seems to be going well until the end of the process, when he said that he did not and suggested that I call my ISP.

  It seems odd that two separate modems, made by different manufacturers do not reach a similar to the installation point.

  I know that the usb cable, filter, cable, modem and line are all ok, as if I unplug the modem to my laptop and connect it to my desktop (XP), the desktop can connect to the Internet without any problems.

  At this point, I got an error message that says "an installation support file that c:\...\_isuser.dll could not be installed - Access denied. "SpeedTouch PPP adapt."

  Any help would be greatly appreciated.

  Ken

  > I did uninstall the drivers on the computer and then install the new 32-bit drivers from the manufacturers Web sites.

  CA? It's really difficult to understand what exactly you were doing! Why did you deleted the drivers from the laptop and then installed all drivers from the manufacturers Web sites? And that the drivers have been removed?

  The entire description confuses me?  :|

  However, in my opinion, is there something wrong with the system files. The simple and the best way to solve this problem is; Recover the laptop with the CD after the operating system configuration and recovery Toshiba around trying to install the ADSL modem as shown in the modem manual!

  Install all 3 third-party applications or drivers after installing the CD recovery because of the bad influence!

• WinXP Conexant Sound/Modem satellite P300D driver problem

  Hello

  I have a strange problem with my Installation of XP. I had to reinstall XP two days ago because there no periodically starts.

  In any case on my new install, I can't install THE Conexant drivers, who would be the modem and audio driver. I need the modem, so this isn't the important point, but the sound is annoying. I've been trying several drivers I found on the internet but none work, they all complain to the facility, there is that no devices found which would correspond to the driver.

  The strange thing is that I was able to install these drivers, when I installed XP about 3 weeks ago... I have no idea what the problem is now.
  Both devices are displayed as "PCI Device" in Device Manager. What is interesting is that the Instance ID of the devices device do NOT correspond with those who are in the files of the driver... maybe a problem with the chipset drivers, who pack things?

  Any advice?
  Thanks in advance :)

  Satellite P300D-13N PSPDCE

  Have you installed the chipset drivers?

  Are all the other devices in device not installed Manager?

  Have you downloaded the correct driver for the P300D, not the P300?

• ATI error and no windows - Satellite Pro A60

  Hello

  When I start my computer, I get a blue error screen c0000415
  A quick google reveals that this is one of these: http://support.microsoft.com/kb/832324

  "So what are you bothering? I hear you cry - the problem I have is, in getting this error of the other (also the ATI card based) I stuck my red disc in and erased everything - including the windows... and CFLA error occurs before windows installs and SafeMode (-that worked perfectly before) does not work because windows is not installed!

  Oh the fun.

  "I think it's a hardware error" - Yes so don't I... However, before the reinstall and get it back, I could work to the computer in safe mode and videos played very well with the resolution and full color. Am I missing the point if I think a video work is an indicator of a working video card?

  I admit that I'm perplexed indeed. I'll try to dig up an old Windows 98 drive, but I don't know how much this will help, because the only copy of XP I have is on the recovery disk... [Return to step 1]

  Any suggestions much appreciated - thanks in advance...

  [it's a satellite pro A60 w / 256 +?] RAM, processor celeron 2.8 Ghz, ATI Mobility Radeon 7000 etc...]

  Hello

  As suggested in document of Microsoft this problem can occur if an ATI Radeon 7200 graphics card has been installed on your computer and the driver that is supplied with this adapter may not work correctly with Windows XP.
  The installation of SP2 should help.

  This statement of Ms. says it all! It of not a hardware problem but it is a compatibility issue with Windows XP (without SP2) and the driver radeon ATI 7200.

  You should try to get an original CD of Windows XP with or without SP2.
  The software callednLiteallows you to create a Windows clean boot CD and add the patches MS and service packs for this CD.

  Then, you can try to boot this CD and after installing the OS, you need to update or change the graphics driver!

• Error in audio - output Satellite P200-1EE - Toshiba HD DVD player problem

  Hello

  I'm new here so I don't know if I'm in the right forum or not, if I'm not I apologize.

  I have a Satellite P200-1EE and tried to play DVDs on Toshiba HD DVD player but everytime I try it comes up with an error message saying "an error has occurred in the audio output settings. Please check audio driver is set up correctly. »

  I tried the update audio drivers but it tells me that I have already installed the drivers the best.

  Any help would be most appreciated.

  Thank you for your time.

  Hello

  What OS do you have?
  What is Vista?

  If yes then another question; have you installed SP1?

  Please also see the European driver of Toshiba page and choose your model of laptop.
  There is a DVD HD v4.32.00 patch reader.
  The other version 4.51.07 HD DVD player is a full version and if the patch won't work, then you must install the full version.

  See you soon

• ConfigFree error starting of my Satellite

  Recently, my friend bought a laptop satellite. Every time you start, he receives the following ConfigFree error message:

  NdsLoadString() mistake.
  (INI file not found: [C:\DRIVERS\CONFIG FREE\NDSFiles\NDSNLS.ini].)

  All this error or have a fix?

  Hello

  As much as I know there is not any kinds of fixes for errors of this kind.
  Have you ever tried to remove ConfigFree toll and install again?