Error: unknown Server

Similar Questions

• Error unknown Server - cc - cannot open a session

  Hello

  I'm unable to connect to creative cloud due to an "unknown Server error".

  Anyone else get this?

  I tried to reset my password without success however.

  I can't connect on the site of creative cloud, but I can't use creative application of cloud on my desk.

  I tried to connect a couple of times and I tried to restart my machine as well.

  I disabled antivirus just in case, but I can't make it work.

  I already installed the software CC on my machine to work without mistakes like that.

  John

  

  Johnxarc,

  Looks like that you actually typed the comand like "/ Library/Application Support/Adobe/OOBE". When the correct command is "~/Library/Application Support/Adobe/OOBE. Please make sure that when you are to go to the windows folder start address with ~.

  Please try this and let us know.

  Kind regards

  Michael Sharma

• Vmrun running on the server Linux RHE 6.6 | Error: unknown error

  I want to start the Windows 7 VM on RHE Linux server host 6.6 using vmrun. I installed Workstation 10.0.1 on host and it works.

  Verified using vmrun, vmrun list.

  But when I tried to start the virtual machine, using

  "ws t vmrun start nogui [VMpath.vmx]."

  It returns ' error: unknown error ".

  Could someone help me with this problem?

  Thank you!

  Correction of this problem. Am help at the bottom of the post. It was discussed with Linux kenrel and module Vmmon

  Re: After installation, kernel 2.6.32 - 504 could not open/dev/vmmon

• Unknown Server error when connecting

  I had this problem for months. And I was UN able to install the new updates for all my creative cloud products that I pay for every month.  Please see the attached screenshot. I uninstalled office cloud creative and installed several times, and this issue will not go away.

  

  Hi zreed92,

  Please see the Ko: http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launching-cc.html.

  Kind regards

  Romit Sinha

• Unknown Server error

  I had problems with signature on my creative cloud account. He repeats to me there is an error of unknown server for a while now, but I don't know what the problem is.

  Hi C-L12,

  Welcome to the community!

  Please follow the link: http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launching-cc.html

  Thank you!

  Ankit

• Unknown Server error, again and again

  I have to delete my... /OOBE/OPM.db file every two or three days to go beyond the connection CC "unknown Server error". Is there a more permanent solution? I did all the updates.

  It's really annoying. I open a file. I get the error "there is no police" because CC does not synchronize my Typekit fonts. Close file. Quit CC. Navigate to the folder. Delete the file opm.db. Open CC. Wait for the synchronization of the police. Open file... This is my rate schedule dubbeling the monthly cost of the CC! I just need my software to work, especially at this price! (Sorry for the rant, but this bug is put on my nerves).

  (Mac pro on the Mountain Lion)

  Hi MarioAspeslagh,

  Please follow the steps mentioned in the KB: http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launching-cc.html and let know us if the error persists.

  Kind regards

  Romit Sinha

• CC Desktop App: unknown Server error

  After the application of CC Desktop Update, I get the message: "unknown Server error". It cannot connect to my account. What should do?

  Hello

  Try this:

  Quite CC Office and remove "opm.db" in:

  Windows 7 / 8-> C:\Users\Nom_de_votre_utilisateur\AppData\Local\Adobe\OOBE

  Macintosh-> user / User-> Library / Library-> Application Support-> Adobe-> OOBE

  Retry,

• Unable to connect to Creative Cloud Download Manager. "Unknown Server error".

  I'm unable to log the creative cloud Download Manager. I get an "unknown Server error". I opened the folder #0184469214 Sunday. My problem persists. Does anyone have a suggestion?

  http://helpx.Adobe.com/creative-cloud/KB/unknown-Server-Error-launching-cc.html

• Connection problem in a creative cloud for updates - unknown Server error

  Problem connecting creative cloud for updates - unknown Server error works very well with my laptop, but this error pops up whenever I try to update cloud adbobe on my main PC programs?

  Please try to perform the steps described in the following base article review.

  http://helpx.Adobe.com/creative-cloud/KB/unknown-Server-Error-launching-cc.html

• "Unknown Server error" - that's what the program says CC when I try to open a session!  Help!

  Updated the CC program and now I can not connect!

  I wanted to update my Adobe programs to CC versions.  I saw that they were all loans in the program manager, but I restarted first because I wanted that update perfectly.  OOPS, when I restarted the Application Manager says he is automatically updated.  The new seems to be merged with the creative cloud Panel.  Now everytime I try to log in, I get just "unknown Server error".

  I checked on the Manager program, which needed to be updated and uninstalled because I have a C: drive of 120g ssd on my video editing PC software.  Now my programs have disappeared and I can't install the new!   Help!

  I have been long awaiting the release CC (because there is a bug in first I was eagerly awating a fix for promised in CC.)   I'm right in the middle of a project for a client that uses the sequences which have suffered from this bug.  As I tried to upgrade, I'm out of the Pan and it to the fire.  Now, I'm really stuck!

  Deleting the file opm.db had me back on track (Mac OSX 10.8.4). Also sent the PDApp.log to Eric. Thank you guys!

• vSphere CLI: error: unknown command

  This could be as simple as just something I miss, but since I do not use the CLI much at all, I thought I'd ask just. I can connect to the CLI, but any command I use the host responds just with either "< command > not found" or when you use vSphere CLI "error: unknown command or namespace.

  I even tried connecting through my server vCenter Server and then go out to the host by using the command - vihost, that works, but I still get the error that the command I try to use it recognized.

  vSphere CLI

  C:\Program Files (x 86) \VMware\VMware vSphere CLI > esxcli - Server < servername > - username < my nickname-> password < password > vicfg - snmp.pl - Server < servername > public - c

  Error: Unknown command or namespace vicfg - snmp.pl

  
  

  You must run this command from the prompt (not hull as shown above) vSphere CLI commands and make sure the bin is in your path. Otherwise that run from here;

  C:\Program Files (x 86) \VMware\VMware vSphere CLI\bin> vicfg - snmp.pl - Server - username - password - show

• Setup error: unknown database 'HQ '.

  Hello
  
  I've been research trying to find someone with the same problem, but have had no luck.  I try to install hyperic 4.4.0 (open source) on a Windows XP using MySQL.  When I try to install hyperic I get the following error:
  
  An ERROR has occurred, the installation cannot continue.
  C:\Hyperic\installer-4.4.0\data\setup.xml:143-FATAL error: paths
  g error has occurred during execution of this line:
  c:\Hyperic\installer-4.4.0\data\setup-interactive.XML:15: org.hyperic.util.Neste
  dRuntimeException$ NestedEx: existing verification of database errors: unknown parts
  to "hq".
  
  I used most of the time the default installation values, and a transcript of the installation configuration is here:
  
  You can enter multiple choice questions, separated by commas.
  1
  Path of the installation server HQ [by default "C:\Program Files"]:
  
  What port the HQ server web interface should listen on for http communication?
  [default '7080']:
  
  What port the HQ server web interface should listen on for common secure https
  ication? [default '7443']:
  
  What the HQ server port must use to Jasper national park service? [default "2099"]:
  
  What the HQ server port to use for the mbean Server? [default '9093']:
  
  Enter the base URL for the web interface of the HQ Server [default 'http://edisvr01.us.local:7080 /']:
  
  Enter the e-mail address that HQ will use as the sender of e-mails [dfau
  lt "[email protected]"]:
  
  Choice:
  1: database integrated HQ
  2: oracle 10g / 11g
  3: PostgreSQL
  4: Enterprise MySQL / MySQL 5.x
  What back-end database must use the HQ Server? [default '1']:
  4
  Enter the URL of JDBC to MySQL Enterprise connection / da MySQL 5.x
  tabase [default ' jdbc:mysql://localhost:3306 / HQ']:
  JDBC:MySQL://localhost:5555 / HQ
  Enter the username used to connect to the database:
  root
  Enter the password used to connect to the database. :
  (new):
  What should be the name for the initial admin user? [default 'hqadmin']:
  
  What should be the password for the original admin user? :
  (new):
  What should be the e-mail address of the original admin user? [default '[email protected]']:
  
  Launching an audit of existing MySQL databases, I get only the default basics that come with MySQL.  Do I need to manually add the Hyperic database before installing?  Does anyone know what I missed?  Thank you!

  Hello

  Yes, you must configure the database and the fallen user database you install HQ.
  Please refer to the http://support.hyperic.com/display/EVO/Set+Up+MySQL documentation

  See you soon,.
  Mirko

• vmrun responds with "error: unknown error".

  Hello

  OS: CentOS 6 x86_64, VMWare Server 2 the latest known version. Everything works fine when controlled via Web interface.

  I'm trying to do batch switch the virtual machine to have his backup files. To stop the virtual machine, I run (as root) SSH shell on the server VMWare Server running a command like this:

  vmrun T - h server https://server:8333 vmroot-u - p "vmpass" stop /full/path/to/server.vmx

  What I see is "error: unknown error". Not too informative, I must add.

  The URL of the host is used with the same name/password, it works fine.

  Could someone suggest ways to overcome this error? Thank you.

  "Stop" using the vmrun command will, by default, stop the virtual machine suddenly level hardware, similar to pull the plug on the machine.

  To stop the virtual machine gracefully, you can use the 'soft' option, which tells the guest OS in the virtual machine to close. When this command is complete, the virtual machine will be switched off.

  For example, run a command like:

  vmrun T - server h https://server:8333 / sdk -u vmroot Pei 'vmpass' stop ' [datastore] myVM/myVM.vmx ' soft

• copyFileFromGuestToHost received the error: unknown error

  Hello

  I did the following command to copy a virtual machine to the host file:

  vmrun.exe"T - esx h https://host/sdk u user Pei password - gu guser - gp gpassword"\[storage1\] CentOs-5.3-x86-64/CentOs-5.3-x86-64.vmx"copyFileFromGuestToHost" / etc/sysconfig/network-scripts/ifcfg-eth0 "" / user/ifcfg-eth0.

  Error: Unknown error

  Can someone help me?

  No vmrun does not exist on the ESX host. But you can run commands vmrun against her to a remote host.

  In this case, the remote host you are using is your vcenter server. Will be also copied the file you are trying to copy it to your server vcenter, not to your ESX host, as well as give him a destination file name to save to your vcenter server.

  --

  Wil

  _____________________________________________________

  VI-box tools & scripts wiki at http://www.vi-toolkit.com

• ERROR: Unknown error returned from Agent of VMware Converter

  I have a XP box with a few applications I want to do in a virtual machine.  I have ESXI free running with several local and virtual machines and the data of the network store.   I installed the converter version 4 and could not convert the PC, so I uninstalled and installed version 3 with the same results.  I have attached customer newspapers and converrter of the last run.  If I look at the process on the area of conversion and customer ESXI, I can briefly see the vm name pop up in the list, and then he disappeared when the error in the conversion box

  This is the output of the conversion

  15:16:33 step 1: connection to VMware Converter Agent on localhost

  15:16:33 step 2: creation of target virtual machine and the conversion of the data

  15:16:35 configuring the settings for the virtual machine target...

  15:16:37 WARNING: decline of additional parallel ports

  15:16:37 WARNING: fall of extra serial ports

  15:16:37 WARNING: down the audio device

  15:16:37 creation of virtual machine target...

  15:16:43 ERROR: unknown error returned from Agent of VMware Converter

  VMware Converter Agent logs are located on the local host to C:\WINDOWS\Temp\vmware-temp\vmware-converter*

  VMware Converter Client connects to this computer can be exported, or found in "C:\Documents and Settings\superuser\Local Settings\Temp\vmware-temp\vmware-client."

  VMware Converter logs is stored on a temporary basis and should be retrieved as soon as possible.

  Any ideas?

  PDK

  PDKNY,

  Welcome to the VMware Community Forums!

  > Root user authentication

  > Connected!

  > Using a specific location DataStore3 to disk: 0

  > Using the data store DataStore3 for VMX

  > Waiting for creation of the VM finish...

  > Waiting for a task to finish...

  > job [error] CreateVm failed: cannot access the file.

  You seem to be getting a failure when creating the virtual machine.  Converter 3 and 4 work the same way, that they submit the request for vCenter/ESX to create the virtual machine, as required.  I have seen where an initial conversion has failed once before or another conversion was at the same time, and we had to restart the running converter (Server source and converter) before the lock system was released on the data store.

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.