Error when installing Service Pack 2

Similar Questions

• Code 800F0816 when installing Service pack 1 in Windows Vista

  I had an 0146 error code, I replaced the hard drive and installed Vista from a DVD of resettlement. So far, all of the updates has loaded fine. When it comes time to download and install service pack 1, it ok until the end it says that is is unable to load the update and I get and error message stating the Code 800F0816. What should I try to get this pack to load?

  I went on the link. What happens is the Welcome to Windows screen. A little lower I can 'get it now' [Microsoft] Security Essentials...

  Microsoft Security Essentials is available only when the WGA scan does not detect the presence of a valid, fully functional antivirus application.  Yet another symptom of an existing infection (ongoing).

  Your 'copy' of the VAS is installed illegally & will NOT work correctly.

  Do a clean install. After completing the clean install this time (in order):

  1. uninstall the Trend Micro application (which will also be reinstalled, but now invalid) & restart.

  2 download/install Microsoft Security Essentials (free), instead of customer Service: http://www.microsoft.com/security_essentials/default.aspx

  3. launch repeated manual checks for Windows Updates & install updates they are offered (follow all prompts) until you finally got SP2 & all post-SP2 installed updates.

  Do NOTHING else online (e.g., navigation electronic control cat; download/installation of other stuff) until you have completed step 3 above.

  Also do NOT connect the computer to local networks (i.e. other computers) or restore all backed up data.

  If you need additional assistance with the clean install, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system

  Notes:

  => You will not be able go to Win7 unless & until Vista SP1 is installed.

  -Online a manufacturer OEM version of Windows is permanently tied to the computer on which it is preinstalled. You may not use the OEM Win7 disc to upgrade Vista to Win7 computer or do a clean install of Win7.

  Good luck! More & outta here...

• Error code 80070005 when installing Service Pack 1 for Windows Vista.

  Original title: error code 80070005.
   
  I tried everything but... Please help!
  HKLM\software\Microsoft\Windows\CurrentVersion\Component Servicing\Retry Agent of base
  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm
  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\VistaSP1-KB936330~31bf3856ad364e35~x86~~6.0.0.18000
  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\VistaSP1-KB936330~31bf3856ad364e35~x86~~6.0.0.18000\InstallCounter

  The most common problem for the denial of access is usually anti virus software or some other programs interfere with the update process.

  Download the complete file and install: -.

  See this article for information: http://support.microsoft.com/kb/947366

  Resolution 3: Close or disable any applications that may be running, restart the computer, and then install the service pack.

• Error Code 800703E3 when installing Service Pack 1 on Windows Vista Edition Home Premium.

  I ran System Scan (programs / access / Comm. guest / Admin / sfc/scannow), I downloaded and ran hard it for Windows Microsoft updates, I also downloaded and installed the system (4/2009) KB947821 update tool via troubleshooting and tried to download and install without protection (via troubleshooting Microsoft Website) nothing helps, my attempts have failed and I'm waiting for my success , so I can run my trial version of Power Point 2011... that's how I discovered I was missing SP1. Help, please!? And thank you so MUCH! :-) Nikki

  Hi Nikki,

  I suggest you to consult the article in the Microsoft Knowledge Base and check.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798/en-us

  Let us know if that helps.

• 490 error code when you try to install service pack 2 with vista

  I have service pack 1 installed on my computer but I get an error message when you try to install service pack 2

  blztcj,
  Take a look at this article and try the steps inside:
  Troubleshooting Vista Service Pack installation issues

  Post back with the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 8007000D error code when you install Service Pack 2

  I get the 8007000D error code when you try to install service pack 2 for vista and I don't know what to do someone else help me with this

  Thanks for the advice I did was download SP 2 separately (no Windows Update) and installed on the computer and it worked perfectly thank you a lot

• getting an error code: 8024002d when you install service pack 3 to the top of a tower of Vista

  getting an error code: 8024002d when you install service pack 3 to the top of a tower of Vista

  Hello

  There is no Vista Service pack 3; He stopped to Service Pack 2.

  «Error message when you try to install updates on the Microsoft Update or Windows Update Web site: «0x8024002D "»

  https://support.Microsoft.com/en-us/KB/958041

  See you soon.

• Error code 800F0811 when you try to install service pack 2 for vista

  Original title: error code 800F0811 when trying to install service pack 2 for vista tried booting in minimum mode and reset my compents windows update or where he worked?

  When try to install service pack 2 for vista tried clean boot and reset my windows update components or where he worked? This two things were proposed during this same error that happened to a customer trying to download sp1

  Hello

  Review the information in the site mentioned below that can help you work with the question:

  http://support.microsoft.com/kb/947366#resolution3.

• I get error Code 80070002 when I try to install Service Pack 1.

  Vista will not be updated to the Service Pack 1 or 2

  I have Vista and have windows automatically updates.  Of course, it is never updated with the Service Pack 1 or 2, and when I go to Windows updates, it says I have no updates available.  Recently I had trouble with my anti-virus software, and they said it was because my computer has not been updated.  I didn't know that I was not common.   However, I get error Code 80070002 when I try to install Service Pack 1, so SP2 cannot be downloaded until I get this one.  I tried everything I could find as an aid, but they were especially when people had problems years ago, when it came out.  What can I do?

  Hi kimber222,

  If these steps are not successful, the next step is and InPlace upgrade. This process is an alternative to reinstalling the operating system. During the process, some of your custom Windows settings may be lost.

  Run a repair installation will restore your current install of Windows to the version of the installtion CD/DVD. You will have to reinstall all the updates that are not included on the CD/DVD.

  Although this process should not damage files and the applications installed on your computer, it is always safe to make sure that you have a recent backup of your data and how to reinstall all software you have installed.

  Fill out the next step for the InPlace upgrade:

  1. Close all open applications.
  2. Insert the Windows Vista CD/DVD intot he computers CD/DVD drive.
  3. In the windows installation program, click install now.

  Note If Windows does not automatically detect the DVD, follow these steps:

  Click on start and type Drive: \setup.exein the box to start the search.

  Note The placeholder drive is the drive letter of the computer's DVD.

  List programs, click Setup.exe.

  In the settings window, click install now.

  1. click on connect to get the latest updates for installation (recommended).

  2. type the CD key if you are prompted to do so.

  3. Select the operating system in the "Windows Installer" page you want to update or Inplace.

  4. click Yesto accept the Microsoft software license agreement.

  5. on the which type of installation you want? of the screen, click upgrade.

  6. when the installation is complete, restart your computer.

• Why do I get 800736B 3 error code when you try to install service pack 1 through windows update in windows 7 64 bit?

  When windows update tries to install service pack 1, it fails with the error code 800736B 3. I am running Windows 7 professional 64-bit.

  I searched around these forums and others to find a solution and I'm afraid I'll have to re - install windows.

  So far I have tried:

  1. installation of the fix/update - Windows6 analysis tool. 1-KB947821-v10 - x 64

  2. I ran sfc/scannow in the administrator command prompt

  3 run the windows update utility for troubleshooting to solve all the problems

  4 remove all content from the C:\Windows\SoftwareDistribution; When I delete these files it redownloads the update, but on installation, you get about 65% of the way through and fails.

  5 disabled and re-enabled BITS

  6 downloaded the stand-alone manual update, installation failed the part of the way by

  Here is the reading for the Checksur.log

  =================================
  Preparation of control system was updated.
  Binary version 6.1.7601.21645
  Package Version 11.0
  2011-03-29 20:20

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store
  (f) CSI identity missing 0 x 00000000 wnetvsc.inf_31bf3856ad364e35_6.1.7600.16385_b3131d70e92cd346 appid
  (f) CSI identity missing 0 x 00000000 ws3cap.inf_31bf3856ad364e35_6.1.7600.16385_f2bcdebb5e0570d7 appid
  (f) CSI identity missing 0 x 00000000 wstorflt.inf_31bf3856ad364e35_6.1.7600.16385_1c88e04231fe3719 appid

  Summary:
  Seconds executed: 419
  Found 3 errors
  CSI identity lack Total count: 3
  Customer experience report downloaded successfully.  Thank you for your participation.  For more information, see the Microsoft Customer Experience Improvement Program on the Microsoft web site.

  Do a repair of Windows 7 installation and then install SP1.

  Windows 7 - repair facility
  http://www.SevenForums.com/tutorials/3413-repair-install.html

• Error unknown 80070005 error message when tried to install service Pack 2 for vista that someone know what it is

  I tried to install service Pack 2 for vista on toshiba laptop each attempt I get error message80070005 (unknown error) is not on the list of errors does anyone know what this message, or how to correct the problem.

  Hi Cassandra,

  Check if the following might help.

  Updated Windows error 0x80070005 - need a fix? Click here

  See also:

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

• Error: ID of control not found when trying to install Service Pack 3.

  Original title: download Service Pack 3 problems.

  can ' download t and installation of service pack 3 as a pop box and say "ID of control not found." How can I fix?

  Hi KathyHook,

  You try to install Service Pack 3 through Windows Update?

  You can follow this link & check if the problem persists:

  How to troubleshoot an installation fails in Windows XP Service Pack 3?

  Hope the helps of information.

• Vista - Code error: 0X8007007B (cannot install Service Pack 1)

  I'm running Vista Basic; I have not installed Service Packs. When you try to update, I am able to download the packages, but I can't install them. After a few seconds, I get an error:

  An internal error occurred during the installation of the service pack.

  Error code: 0x8007007B

  What does that mean? And how to fix it?

  Hey Laurent,.

  Suggestions from the Microsoft Knowledge Base article below may be useful for obtaining the installation completed successfully.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to install Service Packs 1 and 2 without errors

  original title: Vista service pack 1 installed, error, blue screen. Fixed, now what do I do to install service pack so that it will not happen again.

  I want to know what to do to install service pack 1 and 2 safely so that my computer crashes again. He did the first time.

  This is the recovery and repair of Vista Forum.

  http://support.Microsoft.com/kb/948465/en-us

  Information about Service Pack 2 for Windows Vista and Windows Server 2008

  You will get the best help for any update / problem ofService Pack in theWindows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Error installing Service Pack 3 on XP because of the "disk space" despite 40 GB free

  Well, I was working on the installation of some programs for my school (ProE Wildfire 4.0) and to run it, we required some software VSP. When you try to run the software, it gave me errors on missing components and when he tried to download, it gave an error. So I decided to do a Windows Update for I hope to solve this problem and tried to install Service Pack 3 (this a bootcamp partition on a Mac, unfortunately, everything works great on my desk), who was absent, probably because I installed XP only a few months ago. However, whenever I tried to install the service pack, it gives me an error, saying: it took 4 MB more disk and cancel the installation. I got 40 GB free, so I just did a virus scan of the entire system with Symantec and Spybot S & D. Then I made the error of disk checking, defragmentation, disk cleanup, cleanup with CCleaner and cleanup with CleanUp!. And he always gave me the same error. During this time, I realized that Microsoft Security Center was not picking up on my Symantec Antivirus. I had a virus earlier and thought that Spyware S & D and Symantec may have missed something, so I did some research and took measures to protect themselves against a little guy called backdoor.haxdoor.cn. Apparently, I was not according to HSfix and HijackThis. So I thought that Service Pack 2 might have poorly installed and messed up the Security Center and my chances of installation of Service Pack 3. But when I went into Add/Remove Programs (w / visible updates), I couldn't find the upgrade to Service Pack 2 anywhere, that brought me to believe he was present on the XP cd, I have installed since. So I tried to take a break for Service, removing the repository, and then by him restarting. That no longer works. So I gave up on the antivirus error causing the service pack 3 error idea and tried to do some research on service pack 3 generally, but I couldn't find anything really relevant. And now I don't know what to do anymore. Any help would be appreciated.

  silentearth3,
  Well, it sounds as if there are a lot of things with your computer.  The first thing I would say is to clean your system startup and then try runnings Windows updates.  Make sure you have any antivirus or firewall programs that may interfere with Windows Update.
  Here are the instructions for the clean boot: http://support.microsoft.com/default.aspx/kb/310353

  If you still have a question I would then download SP3 to your desktop and try to install from there.  Here are the instructions on how to manually install SP3: http://support.microsoft.com/kb/322389/

  Let us know the results of these steps.  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.