Error when the appellation newly created folder: this item is not found

Similar Questions

• When I try to delete the folder, I get: "this item is not found." But...

  This applies to a group of what were empty folders.  I can rename files, move them, even to save new files in them.  But when I try to delete a file, I get the message that the file is not found.

  I tried to boot mode safe with the same results.

  I checked the security properties, and I have full access.   I also ran Norton AV against records.

  Try this tool.
   
  Unlocker File Remover
  http://www.emptyloop.com/Unlocker/
   

• Connection to the MDEX error. The data service associated with this editor is not properly configured.

  Hello world

  I just change the demand for short CRS, I added an adapter record pipeline everythings run ok and I can download data and search for data using the endeca_jspref page. But when I open the Workbench of short and tried to look at the properties, this error is displayed.

  Any sugestion?

  

  It's the new Pipeline

  

  It's the editors.xml on the APPS/CRS/config/editors_config/editors.xml

  <EditorConfig xmlns="http://endeca.com/schema/editor-config/2010">
      <EditorModule url="/ifcr/tools/pbx/modules/editors.swf">
          <!-- Default Guided Search Editors -->
          <Editor name="editors:BooleanEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:ChoiceEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:ColorEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:DynamicSlotEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:NumericStepperEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:RadioGroupEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:RecordListEditor">
              <EditorConfig resourcePath="/configuration/tools/xmgr/services/dataservice.2.json">
                  <RecordsPerPageOptions>
                      <RecordsPerPage>10</RecordsPerPage> 
                      <RecordsPerPage>25</RecordsPerPage> 
                      <RecordsPerPage>50</RecordsPerPage> 
                  </RecordsPerPageOptions>
              </EditorConfig>
          </Editor>
          <Editor name="editors:SliderEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:StringEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:StringMapEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <!-- Experience Manager Editors -->
          <Editor name="editors:BoostBuryEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:DebugEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:DimensionListEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:DimensionSelectorEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:DimvalListEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:GuidedNavigationEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:LinkBuilderEditor">
              <EditorConfig>
                  <host>localhost</host>
                  <port>15002</port>
                  <spec></spec>
                  <searchKey></searchKey>
                  <rollupKey></rollupKey>
                  <matchMode>allpartial</matchMode>
                  <imgUrlProperty></imgUrlProperty>
                  <properties>
                  </properties>
              </EditorConfig>
          </Editor>
          <Editor name="editors:RecordStratificationEditor">
              <EditorConfig resourcePath="/configuration/tools/xmgr/services/dataservice.2.json">
                  <RecordsPerPageOptions>
                      <RecordsPerPage>10</RecordsPerPage> 
                      <RecordsPerPage>25</RecordsPerPage> 
                      <RecordsPerPage>50</RecordsPerPage> 
                  </RecordsPerPageOptions>
              </EditorConfig>
          </Editor>
          <Editor name="editors:RichTextEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:SortEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
          <Editor name="editors:XmlEditor">
              <EditorConfig ></EditorConfig>
          </Editor>
      </EditorModule>
      <GlobalEditorConfig></GlobalEditorConfig>
  </EditorConfig>
  

  Hi all, I'm here to say that I found the problem on the dataservice.json it is located in APPS/CRS/config/editors_config/services/dataservice.json, the CRS app uses a key repositoryId, rollup and I added a few records that do not have this property if when the CRS app tries to make the group by using this key, it fails.

  Best regards!

• -Pop-up message error when I start my computer: "TVAgent.exe - Entry Point not found".

  When I start my computer, the first message when I see my desktop is a pop up that says "TVAgent.exe - entry not found.» The procedure entry point not found PowerReadACValues in the dynamic library POWRPROF.dll. "I try to close it and it appears in the same as spot 10 times and then finally I can close it and it will not reappear. I tried a full sweep of the computer with Norton and it did not come with anything. All my programs and all seem to work fine right after, but I fear that there is something wrong. I am running Windows Vista.

  Hi Csiew42,

  Thank you for visiting Microsoft Answers.

  ·         Which version of Windows Vista is installed on your computer?
  ·         Remember to make changes to the computer recently?
  ·         Who is the manufacturer of your computer?

  I suggest to perform the clean boot and check if you get the error again. Clean boot will start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  (1) perform the clean boot (check the link to perform the clean boot).

  (2) enable half the services.

  (3) determine if the problem comes back.

  (4) enable half of the startup items.

  (5) determine if the problem comes back.

  (6) repeat the steps above until you discover which program or service is causing the problem.

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7: http://support.microsoft.com/kb/929135

  Hope the helps of information. Please post back and we do know.

  Kind regards
  Joel S

• This item was not found. It is no longer in C:\user\pc\music\backed up\various. Check the point; the location and try again.

  When I try to move the music I just loaded on my computer, I get this message. I can play the music on my computer fine, but cannot drag it to my usb slot. I'm trying to load it on a micro sd card using a usb port. I did it many times and this time I'm having this problem. I tried to put videos and the same thing happens. I even disabled my anti virus and fireeall to try and nothing works. I have already restored my computer for the first day available and the problem is still there. I also checked that file sharing is on. What can I do? Help, please.

  Hi JerryCxz,

  You can check the following link and try to run the Fixit and check.

  Diagnose and repair Windows files and folders problems automatically

  You can also try to use another USB drive and check.

  Hope this information is useful.

• When I try to delete the message in the "Deleted items" folder I get an error message "some items in the folder"Deleted items"could not be deleted." year error has occurred. Any Suggestions?

  I get to see all the messages that I deleted in my "Deleted items" folder and when I try to delete the message in this folder I get an error message 'some items in the folder "Deleted items" can not be deleted.' an error has occurred.  Also when I try to delete my Inbox it won't move message from 'deleted items '.  Any suggestions?

  This is probably due to a mismatch between what is in the message store and which think that the database is in the message store.  Try to compact and repair the database and see if that fixes the problem.  See www.oehelp.com/WMUtil/

  Steve

• Error: CreateFile (C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\~e5d141.tmp I receive this error when opening certain programs that worked and now does not.)

  Original title: error: CreateFile (C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\~e5d141.tmp

  I'm getting this error when opening certain programs to work and now are not. I have studied this particular error and did not find a lot about it or how to fix it.

  I don't think it's a virus.

  I don't know what to do, I tried restores system, right click and run as administrator, I did ensure that allows the firewall thing and completely uninstall and reinstall.

  If you know a way to solve this problem it would be greatly appreciated.

  Delete all files in the temp folder and see if you still receive the error.

  Let us know if that helps.

• FDM 11.1.2.2 fdm adapter not shown when the location is created

  Hello

  FDM 11.1.2.2 fdm adapter is not displayed when the application is created in places

  I'm so when I tried to import data to test data access error

  and in the error log saying his request does not exist

  Please help me solve this problem

  Couple of solution to try

  1. recreate the import format and then reload again as sometimes get corrupted as well.

  2. place an excerpt from the sample of data to load into the Inbox and see if it load successfully.

  3. the account that you use to connect to SQL must have read access as when Bulk Insert is used, FDM creates two temporary files, which is the .tmp file referenced in your error message. The .tmp file is an insert in bulk. In order to run an insert action block in SQL, FDM uses the network account that runs the MSSQL Server service. Account goes off in the Inbox of FDM, reads the file and them slap it in the database.

  Thank you

  ~ KKT ~.

• I get the error message "a license is required to play the selected song or video. However, a license for this file is not found, has expired or has been altered"while trying to play a downloaded song

  Original title: Media Player

  Yesterday, I downloaded a song.  Now my Windows Media Player will not play anything.

  I get the same room whenever I try to start each song in my library:

  Media usage rights acquisition

  wmasf.MusicNet.com

  A license is required to play the selected song or video.  However, a license for this file is not found, has expired or has been altered.  To obtain a license for this content, please visit the website or open the software application in which the file was uploaded originally.  You need to connect or buy the song or the video.

  I ran several diagnostic, and remedial programs, but nothing worked to get media player to work (without getting this popup Media Player and stop).

  It seems to be a kind of malware that has damaged something in my windows media player.  When I put "wmasf.musicnet.com" in the address line on explore, I get only the same message as the pop-up.

  Anyone know how I can fix the media player and get rid of this problem?

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the troubleshooters in Windows Media Player and check if it helps.

  Open the troubleshooting Windows Media Player settings Troubleshooter: http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Media-Player-Settings-troubleshooter

  Open the troubleshooter in the Windows Media Player library:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter

  Method 2:

  Try to reset the management of digital rights (DRM) and check if it helps.

  Follow the steps to reset the DRM:

  1. first of all, check that the hidden files and folders option is enabled.
  To do this, follow these steps:

  a. start Windows Explorer. To do this, click Start, type userinit.exe in the Search box and press ENTER.

  b. click on organize, and then click folder and Search Options.

  c. click on the view tab.

  d. click Advanced settings.

  e. under hidden files and folders, click Show files and folders, clear the Hide protected operating system files (recommended) box and then click OK.

  2. Locate the DRM folder on the computer.
  In general, the DRM folder is located in the following location.
  Note In these paths, drive represents the drive on which Windows is installed.
  Windows 7 or Windows Vista.

  a. Windows 7 or Windows Vista versions x 86-based
  drive: \ProgramData\Microsoft\Windows\DRM

  b. Windows 7 or Windows Vista versions x 64-based
  drive: \ProgramData\Microsoft\Windows\DRM

  3 Rename the file DRM DRMbackup.

  a. right click on the DRM folder and then click Rename.

  b. type DRMbackup, and then press ENTER.

  c. close Windows Explorer.

  Warning: You must contact any third-party stores where you purchased music to reset the licenses for that music. If you copied CDs for protected Windows Media Audio files, the CD must be copied again.

  For more information, see the following Microsoft article.

  The Player Windows Media DRM: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Media-Player-DRM-frequently-asked-questions

  Hope the information is useful.

• OPM get a "this file is not found error" but the document opens without plugin

  I'm under 64-bit Windows 7, Word 2010, OP 10.4.4.21.

  The scenario is strange.  Everything has been fine until today.  Something has changed, and now I am unable to open all the OPM Word documents (or compile compile all).  When I try, the error message ' Oracle Policy Modeling could not open document, such that an error has occurred in Microsoft Word: this file was not found ".". "  The document opens, however, but the plugin is not displayed.  I tried to reinstall OPM several times without success.  Indeed, during install it first a couple I'd always get the error message, but CERTAIN documents open with the active plugin and I could compile in the document - and some wouldn't have the plugin.  After another reinstall, OPM still throws the error, and documents open always in the background, but without the plugin active or exposed.

  I also tried to Repair Word, but do not want to reinstall office.   Excel seems to work very well.  I don't really know what was the triggering event.  The project has been using subversion when he arrived, but now all the projects on my machine, subversion or not, are concerned.  I think it's just my machine and others do not see this problem.

  Has anyone seen this?  Something corrupt?  It's almost like the word invocation simply does not work properly.

  Help!

  Thank you very much.

  OH - I found and fixed it.  Word has disabled the "Add-in".

  1. Click the File tab, click options.  A popup options will appear and then click Add-Ins.
  2. In the box macros complementary , if you see that policy modeling Word 2010 Template.dotm is disabled, you will need to enable it.  Downstairs, choose from the menu drop-down handle and click on the button 'Go '.
  3. Select the type of "Disabled" in the Management area, and then click OK.
  4. Select the item to activate, and then click the button 'Activate'.

  
  

  It was something that should have been easy.  We have a couple of experts of the Oracle takeover bid on the site and they didn't, and R & D in Australia has yet to respond to us.
  

• I recently upgraded to Photoshop cc (2015) and Windows 10.  Now I get error messages - "the extension of com.adobe.preview.loader could not be loaded because it was not properly signed.  And when I try to open a dng file, it comes up with "cannot be compl

  I recently upgraded to Photoshop cc (2015) and Windows 10.  Now I get error messages - "the extension of com.adobe.preview.loader could not be loaded because it was not properly signed.

  When I try to open a dng file, it comes up with "could not complete your request because it is not the right type of doc.  Now I have "expansion of libraries could not be loaded because it was not properly signed.

  Any help would be greatly appreciated.  The program worked perfectly in the past.

  I contacted Support Adobe this morning, and they were able to solve the problem.  It was difficult.

• Why do I get an unknown error when the AI document opening in Illustrator 5.5?

  Why do I get an unknown error when the AI document opening in Illustrator 5.5.? How open/fix documents?

  Did this happen after update to Yosemite? Sorry, but this could be a number of things and not only have a response

  • disable the automatic plugin font activator which is delivered with the police officer, you activate a corrupt police.
  • Clean your cache of police download nuke font it's free
  • reset your prefs AI
  • Delete your printer driver in the system preferences and recreate - Yes, there is a possibility that this can cause this
  • hold off on the update to El Captan for now, even if an update of the system has a chance to eliminate the problem, you're on CS5.5

• I can't open my email on Firefox, it works on explore. When you go to the page I get this message "the requested URL /hunter/ajax_login/redirect.php was not found on this server."

  Question
  I can't open my email on Firefox, it works on explore. When you go to the page I get this e message "the requested URL /hunter/ajax_login/redirect.php is not found on this server."

  Reload Web pages, and ignore the cache.

  • Hold SHIFT and click reload.
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Cmd + Shift + R' (MAC)

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

• iPhoto has stopped working. When I try to download the latest version, I massage "this update is not available for this Apple ID either because it was bought by another user or the item has been refunded or cancelled."... why?

  iPhoto has stopped working. When I try to download the latest version, I massage "this update is not available for this Apple ID either because it was bought by another user or the item has been refunded or cancelled."... why?

  Mac OS X 10.10.3 and newer include Photos, which is designed as a replacement for iPhoto. If you want to go on the use of iPhoto in addition to or instead of switch to Photos, click here and try following the instructions; you will only be able to do if you got before where associated with iPhoto on the Mac App store.

  
  (138042)

• How can I configure drive extender? get an error when the computer shuts down say reinstall Extender player

  get an error when the computer shuts down say reinstall Extender player. ? What is it. Thank you

  Hi deener49,

  Please look at the thread below for a possible solution:

  http://answers.Microsoft.com/en-us/IE/Forum/ie7_6-windows_other/please-reinstall-Extender-Player-invalid-or/86692b09-9464-E011-8dfc-68b599b31bf5