error winxeb32. ROM when I start the computer...

Similar Questions

• When I start the computer, sometimes the icon in the taskbar indicates that it is connected to a network that is not identified. I wait a few minutes until what he says at last he is identified & seems to work very well.

  Original title: Internet wireless connection

  I use a PC & a cable modem wireless to connect to the Internet.  When I start the computer, sometimes the icon in the taskbar indicates that it is connected to a network that is not identified.  I wait a few minutes until what he says at last he is identified & seems to work very well.  The only other issue I see is once in a while after it is connected, I noticed that it is to identify the network connection, but I see no problem to surf the web.  This could be a looming problem with the modem, or is it something else?  Should I consider it as my modem is still under warranty?  ARRIS / Motorola wants to charge a diagnostic fee is why I write on this forum first.

  Thank you

  [Transferred from Internet Explorer]

  Roll up your sleeves & cross your fingers...

  ACTIONS:

  [You can print these instructions for reference offline. DON'T SKIP ANY STEP! [If a step said to restart, restart!]

  1. click right on the link following, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1. right click on the following link, select SAVE TARGET as... & download the McAfee consumer products removal tool, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in step # 1 above and select run as administrator to run the Norton utility. DO TAP not your keyboard until the race ends, then restart.

  3B. right-click on the file that you saved in step # 1 b above and select run as administrator to run the McAfee utility. DO TAP not your keyboard until the race ends, then reboot again.

  4. right-click on the following link and SAVE the download to your desktop: http://iefaq.info/attachments/133/ie8-rereg.zip [1]

  Note: Good for IE9, too.

  4B. right click on the file downloaded in # 4 above has (that is, ie8 - rereg.zip) and EXTRACT its contents to the desktop. This will create a new folder on your desktop namedie8-rereg.

  4 c. close all open applications (that is, anything with an icon on the task bar), open the new folder created in # 4 b above, double-click on the file ie8 - rereg.cmd to run the script and restart.

  5 reaffirm Internet Explorer as the browser in the default CUSTOM (<>) Set Program Access and defaults of the computerarticle. [2]

  6. reset Internet Explorer according to the instructions on this page: http://windows.microsoft.com/en-us/internet-explorer/reset-ie-settings

  Note => for best results, check the option Remove personal settings .

  7. open Internet Explorer (only!) to http://windows.microsoft.com/en-us/windows-vista/windows-update-error-8000ffff [ignore the title & symptoms].

  8 b. ignorant of the "not recommended" or similar warnings, run the difficulty (50202 #) DEFAULT modes and AGGRESSIVE. [3]

  9 restart once again & test.

  10. in response to this post with a status report.

  ==================================================
  [1] source: http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en

  [2] after that we ended up this thread, do not hesitate to reaffirm one of your other default browsers.

  [3] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• I get "Can'tOpenLogFileException ' when I start the computer

  When I start the computer, I get the following: path to the file Can'tOpenLogFile Exception: newspaper: C:\ProgramData\Juno\Accelerator\MainException.log,open mode: 10 to WinMain(.\main.cpp:170) caused by: failure of fopen with errno ErrnoException:Call (2) "no such file or directory"

  When I try to open Juno he opens not and said that Juno detected error then the next screen is a Windows form that says "Juno has stopped working.  A problem caused the blocking of the work programme...
  I need to open the Juno - Please HELP!  Relocation of Juno changes nothing!

  I uninstall Juno and then reinstall again - maybe that will create the appropriate links and do work (it cannot be initially installed correctly) - don't reinstall it just (uninstall first).

  If this does not work, please transfer your question in the Forum program: http://social.answers.microsoft.com/Forums/en-US/vistaprograms/threads where people who specialize in programs that are not Vista or IE will be more than happy to help you with your problem.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• We went to MacOS Sierra of El Capitan and now have to log in twice, when we start the computer.

  We have upgraded to Mac OS Sierra of El Capitan, and now we have to log in twice, when we start the computer.

  How fix us this?

  Thank you...

  All the best...

  God bless...

  If you have activated the preferences-> Security-> FileVault system, then you must enter your password initially so that device drivers can decrypt your encrypted drive.  Once the system is running, you must then log into your account.

  They are really 2 separate activities that happen just to use the same password.

• When I start the computer, my computer opens with a music (sound) very short and when I stopped, it closes with a short, loud music, causing disturbances to third parties. How to remove this noise?

  When I start the computer, my computer opens with a music (sound) very short and when I stopped, it closes with a short, loud music, causing disturbances to third parties. How to remove this noise?

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Step 1: Search for the issue in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  a. Click Start and then click Run.
  b. type msconfigand click OK.

  The System Configuration Utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all services and device drivers and then click OK.
  d. When you are prompted, click on restart to restart the computer.

  Step 2: Change or disable startup Windows and exit Windows sound and check.

  a. click Start, click Run, type mmsys.cpland then click OK.
  b. click the sounds tab.
  c. under program events, click Start.
  d. in the sounds box, click (none), or different sound, and then click OK.
  e. click exit Windows.
  f. in the sounds box, click (none), or different sound, and then click OK.

• How to stop the pop-up for saving files when I start the computer?

  I was going to save files on a drive of DVD-CD-R, but I decided to do not, how can I stop the pop-up for saving files when I start the computer? It keeps appearing even though I cancelled check?

  * original title - cancel recording of dvd/cd-rw *.

  Hello

  Windows displays a temporary storage area where files are held before they are copied to the CD. Files or folders located in the temporary storage area are listed under files ready to be written on the CD.

  Try the steps and check them off below if it helps:

  a. double-click my computer and then double-click the CD burner.

  b. under CD writing tasks, click on delete temporary files.

  When you delete the contents of the temporary storage area, you can set this field to another set of files and folders that you want to copy to the CD. The files are not deleted from their location on your computer or on the CD.

• When I start the computer began logging directly to my account rather than offer the choice of which account to connect to

  I have two users put in place. When I start the computer began logging directly to my account rather than offer the choice of which account to connect to

  Hello GEOFFMUGGLETON,

  This thread has been created in the discussion forum. and performance of Windows Vista Microsoft moderation team has moved this thread to the security, privacy and user accounts Forum.

• Since then, when I start the computer, it goes through a few stages starting and then ends with a black screen with a cursor flashing at the top.

  I left by mistake a USB in the port when I restarted my computer (Windows 7).

  Since then, when I start the computer, it goes through a few stages starting and then ends with a black screen with a cursor flashing at the top.

  If I press ESC during startup and access the start menu, something marked WED... is highlighted and I press on enter and it starts normally.

  How can I get Windows 7 to do a normal boot without having to access the Boot Menu each time?

  Thank you.

  Tried that, but it did not work.  Finally got and IT guy come and it took him 3 1/2 hours to repair.

  Need a bootable floppy which has then repairs itself.

  Lesson learned.  Have an available for each computer startup disk.

• The CPU usage goes up to 50-60% right when I start the computer.

  Original title: high CPU usage

  I have a pc with windows 7 64-bit, 4 GB ram, AMD Phenom II x 2 511 processor and a Nvidia Geforce Gtx 260. The CPU usage goes up to 50-60% right when I start the computer. I ran the Task Manager and there is no program using the cpu. It has nothing to do with anny viruses because I scanned the computer with two different programs. We do not have Steam and the EA download manager. What could be the problem?

  "Idle" means "doing nothing."  Windows runs the "System Idle" process when the processor has no useful to perform tasks.

  Look at the status bar at the bottom of the Task Manager and you will see that the CPU usage does NOT include the percentage for the System Idle process.

  What are the processes other than Idle System added up to 50-60%?

  I suggest that you run an online scan using antivirus ESET online--> http://www.eset.com/us/online-scanner/

  and then download, install, update and run the free MalwareBytes AntiMalware--> https://www.malwarebytes.org/ version

  I expect that the MalwareBytes Installer is clean enough, but you should pay attention when installing any software to make sure that you accept all of the pre-selected options to install other bundled applications.

• Creative cloud is grayed out when I start the computer...

  I'm on Mac. When I start the computer CC is grayed out in the menu bar above. So Typekit fonts are recognized when opening an Indesign document, then I have to go manually connect to CC.

  I thought that CC was just automatically started and total boot time? I didn't used to have this problem. Please notify.

  Please see Creative Cloud App and Sync fonts

• Somehow, all my exe files are marked as Acrobat files - I can not run the software on my computer - when I start the computer none of startup programs because they are all trying to open in acrobat.

  Somehow, all my exe files are marked as Acrobat files - I can not run the software on my computer - when I start the computer none of startup programs because they are all trying to open in acrobat.

  See if anything here help: https://helpx.adobe.com/acrobat/kb/application-file-icons-change-acrobat.html

• When you start the computer, the error: "year error occurred in the program during the initialization of the error Code 0 x 80070002.

  Buy HP Pavilion with Windows 7 64 bit.  Migrate some applications and files of old laptop computer with Vista 32-bit.  Most applications migrated work but when I start the new computer, still get this error message: "year error occurred in the program during the initialization of the error Code 0 x 80070002. Once I close the error message box, applications seem to work.  What is a real problem or just a nuisance, I can't ignore?

  original title: Error Code 0 x 80070002

  Hello

  I suggest to start the computer in safe mode and check if the problem persists.

  Start your computer in safe mode:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If the problem does not occur in safe mode, and then perform a clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Perform step 7 to put the computer to a normal startup.

• The error that says that I have not installed hard drive when I start the computer. Also, when I clicked on my D drive, he told me to the disc is damaged and inaccessible

  Original title:

  When I start my computer, a message on the screen says I have no hard drive installed. my computer will load eventually after many attempts and when I clicked on my D drive, where all recovery files are kept, it tells me that the disc is damaged and inaccessible.  Can someone help me before I'm locked out of the computer for good?  Thanks in advance Andy D.

  Determine the manufacturer of HD computer. Go to the manufacturer's website and download their software/utility to check the Dowload HD it and burn it to CD or DVD according to the instructions. Boot from the disc newly manufactured. Run the utility to verify. If necessary, replace the HD and restore backups.

  Tom Ferguson

• my computer has two network icons, 1394 and con LAN. Either, especially the icon of LAN began to move to items being passed in the system tray when I start the computer.

  I have a new and strange behavior on my computer. Until recently, the two icons, 1394 connection and LAN icons always used to appear in the whole system tray after the computer has been started. Is no longer the case. Whenever I start the computer, I don't see the icon of LAN but discover that it attributed to items passed. Then I open the properties of the network connection, uncheck 'Show the icon in the system tray', click Apply + OK, then I open the properties, check the box again, click Apply + OK; only the LAN icon is displayed in the system tray. I'd appreciate any help with this problem. The situation is sometimes the reverse case, i.e., LAN icon appears in the system tray, but I find the icon to connect 1394 points ago. I put the properties in the Start Menu, the toolbar always showed.

  Hi ErhanKarabekir,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  Method 1

  Refer to the article below and try the steps mentioned, check if it helps.

  How to troubleshoot missing network connections icons in Windows Server 2003 and Windows XP

  http://support.Microsoft.com/kb/825826

  Method 2

  If the previous step fails to them it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• BSOD when I start the computer.

  I got twice the BSOD now when I start my computer, the next time I start up my computer after the BSOD I don't understand and my computer starts as usual. And I get a message with the details of problen:

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1044

  More information about the problem:

  BCCode: a
  BCP1: 0000000000000000
  BCP2: 0000000000000002
  BCP3: 0000000000000000
  BCP4: FFFFF80002CACF74

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\110312-15553-01.dmp

  C:\Users\Kristoffer\AppData\Local\Temp\WER-23275-0.SysData.XML

  Hello

  References to Vista also apply to Windows 7.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (updated drivers manually using the methods above is)
  to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
  be older and cause problems. If updates offers a new driver and then HIDE it (right click on it)
  and then go look for new ones manually if you wish.

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ==========================================

  Tests of memory intercept all errors such as memory do not match (possible even for sticks
  seemingly identical) and when the faster memory is placed in system behind the slower memory.
  So it is best to Exchange also sticks in and out to check for those, even if all the tests of memory do not
  show a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For the Windows Memory Diagnostic tool.

  Start - type in the search-> memory box - find top - click - right Memory Diagnostics tool
  RUN AS ADMIN follow the instructions

  Windows Vista: How to scan / test your memory with Windows Vista memory or RAM
  Diagnostic tool
  http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

  How to run the diagnostic tool memory in Windows 7
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">