All printing errors in the queue for a shared printer

Similar Questions

• How to increase the value of the queue for a server to avoid errors

  In the RESOURCES section of a config of ubb, "MAXQUEUES 700" stand for all servers queue or queue on each server?
  
  Because there are a lot of "ERROR: the Message Queue blocking warned childbirth, Qaddr = 583902 ' for a server in ULOG, what should I change the value of the queue of this server to a higher value to avoid this error? Change the "MAXQUEUES? If increase the queue for a server?
  
  Thanks for your kindly reply.

  MAXQUEUES is used to specify the maximum number of queues - not number of messages on a queue of (each).

  To solve your problem of blocking, you might consider adding servers (to accelerate the responsetimes).
  Another option could make synchronous calls if it would make sense for some application that you design.

• What is a good way to use the queues for the model of consumers/producers?

  Hi all

  I am following the model of consumers/producers to use the queue to synchronize the following process: the producer is a loop to produce a number N, I will put each number generated in a table and after each 5 numbers generated, I put the table in the queue and pass it on to the consumer. I have to wait the use by consumers of the data and it will then remove the item from queue so that producers will have the chance to produce another 5 numbers. As I put the maximum size of the queue one, I expect that the producer and the consumer turns to produce / consume all five numbers and the opportunity to another. Here is my code

  

  When the checkbox is false, the code will be

  

  For the first 5 numbers, product will generate every thing right and put it in the table, and it's going to pass the array to the quere so that the consumer will have the chance to loop through the table. I except the procude loop will continue only when the queue is available (i.e. all items are deleted), but it seems that once the consumer starts the loop loop of the product will continue (if the indicator x + 1 and x 2 will be changed to numbers). But this isn't what I want, I know there must be something wrong, but I can't say it is.

  dragondriver wrote:

  As you say in 1, sequency structure to enforce the order of execution, that's why I put it here, in this example, the simple question, I replace the complete code with increase in the number, in the real case, the first markers + 1 and + 2 must be performed in this order.

  Mikeporter says:
  1. get rid of all the structures of the sequence. None of them are nothing but apply a work order which would have been the same without them.

  So even if you delete the sequence structure, there will be a fixed & defined order and it is because LabVIEW follows the MODEL of FLOW OF DATA.

  Data flow model (more precisely in the context of LabVIEW): a block diagram node runs when it receives the required inputs. When a node is running, it produces output data and transmits data to the next node in the path of the data stream. The flow of data on the nodes determines the order of execution of the VIs and functions on the block diagram (click here for reference).

  Now in your code, just remove the sequence structure will not make you order will be going to stay the same, but you need to do some very minor changes (as thread of the error in loop, before that he go to the node "Élément Dequeue").

  Come to the main point: it's a good way to use the queue for the consumer/pmodel that?
  The model you are using (and qualifying as consumer/pmodel) is much too deviated from the original consumer/pmodel which model.

  dragondriver wrote:

  For the second, Yes, it's my fault for delete, though. I'm actually the example of model of producer/consumer design pattern, but I do not pay attention to the while loop in the part of the consumer.

  While loops (two producers & consumers) are the essential part of this architecture and cannot be deleted. You can start your code using standard model.

• error in the terminal of a shared variable

  I read in the help of Labview entry 'Error In' to a shared variable provides a feature of "type error in. What I am unclear on the subject, is that if an error occurred before the shared variable, it will cause the shared variable NOT to do what it is supposed to do? If an error is passed to the entry 'Error In', the variable node still shared read/write as normally?

  Lol mistake-type functionality means that when an error is passed, the node will not run.

  (You can check yourself by writing a simple VI.)

• How can I connect Windows XP to several networks, Wi - Fi for internet and the other for file sharing?

  On windows XP, I need to connect to two different networks. Free wifi for the internet and the other for file sharing.

  Different gateways, different static address, same subnet mask. But there is problem when operating simultaneously and must

  a network must be disabled. Is it possible to run simultaneously?

  original title: served various networks simultaneously on windows xp

  Go to where you have configured the static IP addresses for your network adapters.  Leave the "default gateway" blank for your local file sharing adapter and insert a valid default gateway for your wifi Internet adapter.  Of course, this will limit your adapter in a single subnet - which should be OK for use at home or small office to share local files.

  This should work as long as the two physical subnets have two different subnet numbers. In general, this means that the first three digits of the IP address of the adapter can not be the same on both adapters - if they are, then you need to make one of the subnets. (i.e. one is 192.168.1.xxx and the other would be 192.168.2.xxx).  This is usually accomplished in the router configuration page.

  HTH,
  JW

• How to open the queue for the printer HP Deskjet F2120 all-in-one printing?

  My OS is Windows 7 Home Premium. I had a problem with being stuck in the print queue, print jobs what has caused the printer become inoperative.

  The print queue is now disabled, but I had to download a diagnostic tool from HP which has scanned the printer and cleared the queue. That fixed the problem, but in the past when I had this same problem, I just access the leading printing and deleted stuck jobs. I couldn't find a way to get to the queue print this time and I hope someone out there can tell me what I did right.

  Hello

  • Click Start
  • Click on devices and printers
  • Right-click your printer and choose "see what's printing.

  Tricky

• HP officejet pro 8600 printer: print the job stuck in the queue for a printer hp officejet 8600

  I try to print a document on my 8600 pro hp officeject and printer, but it will not be printed because there is a print job stuck in the queue.  I tried to cancel the print job stuck but will not remove. I tried to turn off the printer, but it still won't delete. Can you tell me how to cancel a print job that is stuck in the queue?

  Hello

  From the desktop, hold down the Windows key and press R.  In the run window, type services.msc and press to enter.

  Scroll down to the print spooler service, right click and select Properties, then click the Stop button.

  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

  Restart the computer and you should find that the document has been deleted.

  Kind regards

  DP - K

• status: error in the queue

  OfficeJet 6210

  Mac 10.6.8

  Queue reads "Status: Error".

  Scanner/copier works independently, but when a doc is sent from the computer for the printer above error occurs.  No changes made to the system.  Worked fine yesterday.

  If you are using Snow Leopard or Lion and you have the HP software before Snow Leopard (either from a CD not marked as compatible with 10.6 or you recently upgraded to Snow Leopard or Lion and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall< this="" is="" the="" scrubber="" option,="" there="" is="" no="" button="" labeled="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Download and install this: support.apple.com/kb/DL907

  Now reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• error in the search for driver updates.

  I did a self diagnostic computer and he felt that the 6TO4 card has a 'configuration problem preventing it from properly start"," maybe he have good driver or may be affected by a hardware failure. "The Plug and Play ID for the device is 13" there was another driver that does not leave too, "Plug and Play #is ROOT\ * 6T04MP\0000» I am also including the information that I found on the driver #' s: pilot 6TO4 adapter c:\windows\system32\DRIVERS\tunnel.sys-driver version: 6.0.6000.16386 file version: 6.0.6001.1800(longhorn_rtm.080118-1840). I also found, "this device cannot start code 10.", "Windows finds drivers software for your device but encountered an error trying to install it.". He also told me that Sigmatel C-major also had information about this but I have not checked who yet because I found on a part of the device manager that all the updates had been installed. I went to Windows Update to make sure that all my options have been exhausted and found: "Windows could not search for new updates and error occurred when searching for new updates to your information. Error found Code 80070490. Windows Update has encountered an unknown error. ». He also told me to ask for help, so here I am, I have not install no matter what material I have downloaded a few security programs and what not, I'm too hip on Windows automatic updates I am too a novice not I don't (yet) know it as the computer and does not need, so I left it on automatic from the start. I have clkd on the diagnosis of the problem and the solution to go home, which is what you see above, I tried to clk on install updates, but the computer says all updates are installed, but the driver does not always work. I've had the computer for less than a year (my first one), but I had no real problems with it other than what I've caused by my own ignorance. If I had not run that diagnosis I wouldn't have known I had a problem with the driver, but it is obvious to me that if the computer will function even though all aspects of it should work. I only know about it for about a week, I had other things to do and I can do without this driver does not work, but I want it fixed too. So what do I do about it? Thank you for all that help you can provide.

  Hello dumdeedumdum,
   
  a. you have problems with the network for not being able to update the driver?

  b. What is the operating system installed on your computer?

  The best way to fix this would be to go to the computer or the device Manufacturers Web site' and download the updated driver.

  Do not scan the computer for the update of the driver.
   
  If all your devices and the network works well, you can skip this update. Microsoft has confirmed that it is a problem in the Microsoft products listed in the section "apply to".
   
  If you have a Vista-based computer, you can consult this article:
   
  http://support.Microsoft.com/kb/932520/en-us

  I hope that the information above helps you.
   
  Kind regards
  Manasa P - Microsoft technical support.

• 91 error to the database for data Variant

  Hello

  This issue was raised after that I "solved" this problem earlier today: http://forums.ni.com/ni/board/message?board.id=170&thread.id=446931

  Now, I get the above error message on all functions 'DB retrieves the element '...

  

  I have the polymorphic option off - as I have it set to automatic...  The stored procedure in the above case is trying to choose a 0 or a 1, Boolean values ala.  However, this is not the only point of failure.  Actually, I get this error on each item to search, using 4 data types: Boolean, String, I32 and DBL...

  

  Can you see what I'm doing wrong?  I spose I'll upload my VI, but you will not necessarily be able to see the data of my STORED procedure is back...

  Thank you!

  Dave

  OK, this problem occurred because the stored procedure has been throwing up on my settings input parameter, unbenouced for me until I entered the code...

  The reason why I was getting this error was that I believe because I was getting a NULL Recordset...

  After that, I fixed my problem of input parameter, this large all worked.

• Error "Unloading the box" for the download of victory 8

  I had a problem after another trying to get the 8 upgrade win.  First of all, even if Microsoft has validated my record ID, I could never get to the stage for the upgrade.  Instead, I was taken into a page to pay full for win 8 or Win 8 Pro.  I spend about an hour last night with Microsoft technical support.  No one could discover the problem.  Finally, I agreed to buy the product at full price and take out a loan for the total.  Now when I access my account at Microsoftstore.com, I have all the information on the order.  But when I start the download process I get this message when running the executable: unloading of the box.  An error has occurred.  Unspecificed error.  OK

  I did a complete restore of the system several days ago and then added all the updates on the computer that I use to download.  He has Win XP with SP3 installed and no AV installed (fear that it interferes with the download).  (I got the upgrade with the purchase of a Win 7 machine this last fall and to install the upgrade on the XP machine for now.)

  Updates, that I initiated on two other computers have finished without any problem, so I feel comfortable with the process.  However, the third effort seems to be missing the "charm" of the first two.

  Thank you for your help.

  This change solved my problem.  I found the information after a search on the web.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/problem-initiating-Windows-8-Upgrade-Assistant/a81a2b80-F032-46EC-a0e6-4512aa8bcbf4?page=3

  The problem seems to be that a service (Terminal Services) under Win XP does not start when necessary as part of the download process.

  Go to my computer. Right click and choose manage. Choose Services | Highlight the Server Terminal Services | Right click and choose Properties.

  Change the manual setting to automatic.  (Note that on the site, some users choose a different setting, but auto allows the service to run at startup.)  Close and restart the computer.

  I hope it's useful to others.

• Size of the queue for Signal form write XNET

  Hello

  I am using the XNET library to play a preset on an output signal waveform. I work with LabVIEW 2014 SP1, 14.5 XNET on a W7 Pro 32-bit operating system. I use an NI PCI-8512 map. This is my first app using the xnet library.

  In my test application, I give the user the ability to set the waveform to play. The total duration and the sampling frequency can be set. The output MAY report is cyclical, with a cycle time of 0.01 s (10 Hz). I chose to use the same frequency for example my wave form and writing of the CAN.

  I have difficulty working with the size of the queue. In this example, it's good but I did not really why. I tested different values in the size of the queue and 100000 seems to be good up to 60 seconds. But for the longest (about 5 minutes), this method is not good...

  

  What is the right way to work in this mode and how use efficiently the property size queue? Information and example of using software and hardware OR XNET are not very convincing...

  Thank you in advance!

  You can add several items at the end of the queue until the queue is empty.  So if you want to write 10,000 points, and your buffer is only 1000 points, then wait and monitor the number of messages remaining in the buffer, and once it is less than 100 say adds an another 900.

  I used this method for flashing on CAN and LIN.  I needed a way to watch specific at specified times images, and a single point of frame link would not repeat (which could write the same byte twice what would be bad) I could have made the rivers and used avoiding, but a better solution was to use queue and add more pictures at the end of the queue to try to keep it as complete as possible.

• Need help with the error of the EFS for SBS 2008

  I get the following for encryption: "year error occurred applying attributes to the file", then "strategy of recovery configured for this system contains an invalid recovery certificate" for encryption on SBS 2008.  Server doesn't let me encrypt on our network.  Our certificate on the server says it is valid and run cipher/r does not solve our problem.

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• The new XP installation error. The signature for the family Windows XP Setup is not valid. The error code is fffffc0d

  I'm doing a fresh install of Windows XP Edition family on a new hard drive.  I get the same error message indicating that the product catalog can not be installed. I reformatted and retryed with the same result. I tried a different HARD disk, but got the same trouble. I also tried installing XP Pro after a reformat and got the same error. The first error window says "the signature for the family Windows XP Setup is not valid. The error code is fffffc0d", and the second says" error: the system cannot find message for message number 0xfffffc0d text in the file for syssetup.dll fatal error messages: Setup failed to install the product catalogs. " Any directive or ideas would be greatly appreciated. THX

  Hello

  I suggest you try the steps from the link below and check if it helps.

  http://support.Microsoft.com/kb/307153

  Hope this information is useful.

• Adobe media encoder cs5.5 fails to open the queue for the first export

  Adobe media encoder cs5.5 fails to open the queue when first CS5.5 exporting. I use an Mpeg2 normative action and choosing export immediate option works very well. After having chosen the option of queue, Adobe media encoder will show its splash screen... Then nothing. Does anyone else have this problem?

  Premeiere CS5.5

  ASUS Board

  CORE I5 2400 K

  16 GB of Ram

  NVIDIA GTX 560Ti (software hack)

  2 TB internal dedicated video player

  Try trashing the preferences of the user for media encode.  It is usually the cause of this type of problem.