ES2 installation on Windows Server 2003 - possible?

Similar Questions

• Installation of Windows Server 2003 on computers I7

  I would like to know if it is possible to install Windows 2003 Server on unit pre-assembled PC with a core I7 processor.

  The situation is that we have an old unit of PC which runs under Windows 2003 Server.Our company would like to upgrade the unit from the computer to a pre - assembled PC (mother of type server) to cut us out of the budget on the costs of equipment and install a license of windows server 2003.  But we are concerned that windows Server 2003 will be able to turn on a core I7.

  It is possible to install Windows 2003 server on a core I7, what are the steps that I require to set up correctly.

  Thank you.

  Hello

  As the question you posted is related to the installation of Windows Server 2003, I suggest you to post the question on the link provided below for assistance.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Satellite A200 - Installation of Windows Server 2003

  Dear Sirs,

  Recently, I bought a toshiba Laptop which has Vista Home Premium operating system. In the free space on the hard drive, I intend to install Windows Server 2003. When I insert the CD, the "install Windows Server 2003" is disabled. It does not run the application installation, and as such, I couldn't install this operating system.

  I even tried to start the insttallation put the DVD drive as a boot preference. Still it I cannot install the Windows Server 2003 operating system.

  Can someone help me in this problem. I wanted to install the Windows Server 2003 next to the Vista operating system.

  Thanks in advance.
  Rama

  > When I insert the CD, the "install Windows Server 2003" is disabled
  What do you mean by people with disabilities?

  You are not able to boot from the CD?

  In these cases, please press the C button immediately after switching on the laptop. This should allow booting from the CD/DVD drive.
  Alternatively, you can try to press the F12 key instead of the C key. This should allow the start menu. Then you could choose the STRANGE as boot device and might try to boot from the CD-ROM Server Win.

• Installation of Windows Server 2003 on vmware workstation 9

  Hello

  I try to install windows server 2003 R2 x 64 edition as a guest OS on vmware workstation 9. But it gives me the time hard the same installation.

  First I had the

  "found no hard drives installed in your computer error.

  I was able to fix this by downloading it pilot vmware scsi. Now I get NTLDR is missing, restart the computer.

  
  

  I have install windows OS was frank. Anyone faced this problem. Please advise me? I have 2 CD (Cd1 and Cd2) of Windows server 2003 edition.

  
  

  Any help is appreciated

  
  

  Thanks in advance
  

  
  

  1 you shouldn't have to download all the drivers for the vHDD, as LSI Logic drivers are included in Windows Server 2003.  In other words, you have not selected correct SCSI (LSI Logic) controller.

  Now I get NTLDR is missing, restart the computer.

  Make sure that the disk is disconnected.

• Error during installation of Windows Server 2003

  I installed VMWare Player, however, when I went to install Windows Server 2003 (easy installation) on my windows 7 Home Edition (64-bit) as owner / administrator.

  The VMWare authorization Services do not seem to be started, but when I try to start them via the services.msc, I get the following error:

  "Windows failed to start the service on Local computer VMWare authorization Service.

  "Error 1067: the process terminated unexpectedly."

  I studied this error and saw a few notes on adding __vmware_user__ my users the.  But with what privileges?

  I also saw a few notes on execution of "regsrv32 vmauxx.exe" which does not work on my computer.

  Any ideas on how to proceed?

  Thank you.

  Lee

  Welcome to the community,

  Installing on Windows 7 is sometimes delicate. Take a look at http://faq.sanbarrow.com/index.php?solution_id=1113 to verify that your installation is ok or how to fix it in case it is not.

  In addition to the installation of VMware Player, I suggest that you install the guest without using "Easy Install".

  André

• Installation HP Windows Server 2003 on Dell PowerEdge 2600

  I'm trying to implement a PowerEdge 2600 for use as a test platform to run SQL Server 2005 scenarios.

  I bought the system off eBay without BONES.

  I bought a copy of Windows Server 2003 R2/5 cal off Ebay too.  When the OS disks arrived disk #1 is a HP "for distribution only with a HP Server new."  Version.

  When I tried to boot the system on drive n ° 1, the system goes by it's starting controls and then presents the message:

  The system is not a supported platform.

   

  1. is legal to sell and use the specific operating system OEM?  Apparently the systems OEM disks provided with finished up having Linux installed on them.

  2. other OEM/HP disks would work with Dell platform?

  Thank you!

  
  

• Enterprize Manager installation on windows server 2003

  Hi all
  
  I have windows server 2003, oracle 10g 2 version is installed, but Manager enterprize is nonexistent.
  
  How I install Manager of the company without risk, without the need to restart the database?
  
  It's a production database.
  
  I need your help.
  
  Kind regards.

  Maahjoor wrote:
  Yes, I did, and it is said to be the last...

  services started successfully.

  now what?

  first of all, you need to start EM before (ab), you can use it.
  then why you depend on 'EM?
  EM has simply SQL for the lazy or incompetent.

• Windows Server 2003 STD Installation of PE 1950 freeze

  Hello

  I have a PE 1950 I'm trying to reinstall Windows Server 2003 STD. There a PERC 5 / i controller SCSI with a Raid 1 configuration. I've updated the Bios Dell 2.0.1 and the PERC 5 / i firmware to version 5.2.1 - 0067. I created and initialized from cd Dell Open manage Cd (V 5.2.0) and go through all the instructions. It copies the files from the Windows CD-ROM server hard disk, so he asked to restart. So I do, then the Windows installation screen rises, and the server hangs. The gray bar at the bottom of the installation is not upward to install a 3rd party SCSI driver. If I restart the server, it freezes again at the Windows screen.

  I ran an extented diagnostic systems on it, but she came back without error.

  I'm running out of ideas on how to get Windows Server 2003 is installed on this server. Ideas or comments will be appreciated.

  
  

• The connection Server 4.6 on windows server 2003 32-bit sp2 installation

  Hello

  I'm trying to install the server to connect to 4.6 on windows server 2003 sp2 32-bit VM, I got the following error

  VMware-connectionserver-x86_64 - 4.6.0 - 366101.exe is valid, but for a computer other than the current computer type

  Processor: Intel (R) Xeon (TM) CPU 3.60 GHZ and I configured 2 GB RAM with PAE.

  Waiting for your help to solve this error.

  Thanks in advance

  You try to use the 64-bit Installer, download the 32-bit Installer instead, and it should be good.

  Linjo

• Txtsetup.OEM is not found in Windows Server 2003

  Hello

  I am currently installing windows server 2003 on a Server Blade. during installation, the error "txtsetup.oem be found" suddenly appeared on my screen after the server by copying the files into the drive and restart. so I can not proceed with the installation. Please please help me as soon as possible concerning this question. Thank you very much ~

  Hello

  I am currently installing windows server 2003 on a Server Blade. during installation, the error "txtsetup.oem be found" suddenly appeared on my screen after the server by copying the files into the drive and restart. so I can not proceed with the installation. Please please help me as soon as possible concerning this question. Thank you very much ~

  Hey Arief Syahril

  Here is the vista forums

  You should receive the help you need if repost you in instances of server via the link below

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb250589.aspx

  Walter, the time zone traveller

• Linux vs Windows Server 2003 as a guest

  I'm building a new NAS for my home network. After doing extensive research on my OS options, I decided that Ubuntu 10.10 Server and Windows Server 2003 will be used. My question, which OS works better on top of the other, the performance and stability wise? Should I run VMware Server 2.0 on Ubuntu and virtualize Windows Server 2003, or vice versa?

  Here's my hardware configuration. Remember, I use Ubuntu with 3 drives of 2 TB and 3 750 GB drives, software RAID5. Records of 2 to 3, will be attached to a Rosewill RC-218 SATA II controller.

  Thermaltake PurePower 500w

  BioStar TForce 520

  AMD Athlon 64 X 2 6400 +.

  Crucial Ballistix 4 GB

  3x750GB Seagate Barracuda 7200.10

  3x2TB Samsung Spinpoint F4

  250 GB Seagate Barracuda 7200.10 (system disk)

  If you need additional information, feel free to ask.

  Thank you

  Tony

  If you want to either run a single Ubuntu VM on a host of 2003 or run a single VM 2003 on an Ubuntu host?

  Then I'd clearly vote for host of 2003 for the following reasons:

  -installation of VMserver 2 on 2003 is trivial, while it is an adventure on current Linux

  -Host Windows can be configured to return all the virtual RAM inside the actual RAM that is not possible on Linux hosts - which means that a host of 2003 will work better for a single virtual machine

  -2003 is very stable so that a host Linux VMserver 2 tends to leaking memory after long uptimes

  -on a host of 2003, you can easily use the ViClient to manage the virtual machines

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• Windows Server 2003 external to the application of the Apex and listener Apex?

  Hi all
  
  I have oracle RAC INSTALLED on solaris with three knots. I have several users with the CCR. I want to install APEX so that each user can access APEX if they need. Based on the Google search I did is not clear for me. My goal is to stay away as much as possible of the production systems. Could you please tell me which method can be good to implement this? I think following methods but I don't know if they are correct.
  1 - Position the external Apex of Windows Server 2003
  2 - Place the Apex listener in Windows Server 2003
  3 - allow the user connect to the Windows Server to access Apex
  
  Thank you

  Hello

  APEX needs to be installed in a database. If you do not want to expose your RAC and use a separate instance of the database, users will not be able to access the data available in the CARS (unless you create database links, but you usually don't want that).
  You can install APEX Listener on your Windows 2003 to access the APEX facility in your RAC database. You must choose a J2EE container to host your listener of the APEX. See APEX listener installation guide for supported containers or search the forum or google to find out what other containers may be suitable for you (for example Apache Tomcat is not officially taken charge but able to accommodate the listener).
  You need to configure the firewall and/or rules of routing for all users may access the port used by the container.

  -Udo

• Satellite A200-1BJ: Windows Server 2003 need display driver

  Dear Sir.

  A couple of days, I bought laptop Toshiba Satellite A200-1BJ of Jarir Book Store, Al-Khobar, Saudi Arabia.
  The system configuration is provided by the company.
  Operating system: Windows Vista editions Home Premium
  300 hard drive space is divided into two partitions:
  C - Vista with Go 138
  D data disk seen 139 GK

  I installed windows Server 2003 on the D drive. However, the hibernation and Eve features do not appear in the windows server 2003 OS. According to the Microsoft articale, these two functions becomes active only after the installation of the correct display drivers.

  My computer is the "Mobility Radeon HD2600" display device. I search all over the internet and also interviewed via e-mail at ati.com (the manufacturer of this device). I could not the device driver compatible for Windows Server 2003. According to the ATI support staff, I need to contact the manufacturer of the laptop is Toshiba himself.

  Can anyone provide me the site or the software driver for "Mobility Radeon HD2600.

  Thanks in advance.
  Kind regards.
  N. Rama Krishna Pai

  Hello

  Are you looking for the drivers for Windows Server 2003?
  Well, I think you will find all the drivers Win Server 2003 because this drivers don t exist.

  Win Server 2003 operating system was designed based on windows XP.
  So usually the drivers Win XP should work!

  Furthermore, as you are probably aware that the Win Server 2003 operating system is not supported by Toshiba you need to search on sites of third 3rd ATI graphic driver.

  Maybe a site www.omegadrivers.net might help you.

  But note; 3 third party drivers can be installed ONLY at your own RISK! Why?
  Because these drivers have not been tested and so no one can tell if the laptop will run stable and will work properly after installing these drivers.

• Quosmio G20-106: issue of Windows Server 2003 and the Fn keys +.

  I installed Windows Server 2003 on my Quosmio G20-106.

  After I installed all possible drivers and saving Toshiba download area, I have still 3 features in the "Other devices" section: eHome Infrared Tranciever, network card and the PCI device.

  In addition, Fn + keys do not work, I can not change the brightness.

  Any ideas?

  Hello

  Well, as far as I know the Qosmio G20 was delivered with Windows XP MCE.
  I found the drivers on the Toshiba site, and it seems they are designed only for Win XP and Win XP MCE. In this case, it is possible to s as the FN keys and other devices don't work.
  Nevertheless, it seems to install the LAN driver and modem driver.

  I found on the Web from Toshiba site a FAQ How to identify an unknown device
  Please visit this site:

  http://support.toshiba-tro.de/KB0/TSB57014E000QR01.htm

  Good bye

• Tecra A10 - 12O: installing the driver network card in Windows Server 2003 R2 Std

  Hello

  I received 6 laptop Tecra A10 - 12O, and we need to install Windows Server 2003 R2 Standard Edition with SP2 in all these six machines. Windows Server 2003 has been installed perfectly, but now we have only the network LAN card to work but we are unable to install its driver. When I installed Windows XP from the supplied DVD for Toshiba, it says Intel 82567V Gigabit network adapter. I tried to download the drivers for this adatpor of drivers Toshiba, Intel Web site, but it will not install in Windows Server 2003. I also tried manually force to choose and install a driver from the list, I choose that it will install but shows yellow question mark in Device Manager means that it does not work with this driver.

  I also tried the same Intel 82567V drivers from some sites non-Toshiba, of these models using the same network card, but is not truck drivers at all.

  I understand these laptop computers does not support Windows Server 2003, but these were ordered to be used as servers with Windows Server 2003 Standard Edition and I am required to make the Installer only with activated and installed network adapter.

  I try last week and exhausted all means to get the installed network adapter driver, but all have failed. Can someone please help with this? All support will be highly appreciated.

  Thank you.

  Charwal

  Hey Buddy

  If I m not wrong Windows Server 2003 uses the same drivers as Win XP and I guess that it s driver problem not a LAN, but perhaps also the problem of Windows Server 2003 installed.

  You are right; the LAN chip seems to be Intel 82567V and the LAN driver downloaded from Intel page should work 100%.

  In your case, I would recommend installing the chipset driver.
  Remove the LAN card from Device Manager, then restart the laptop.
  Then go back to Device Manager and update driver in pointing devices Manager to the place where the driver downloaded LAN was stored on the HARD drive.