ESG a key to restart

Similar Questions

• Remove disks or other media.__Press press any key to restart

  Hello

  I've seen a few posts on this topic but not have been very useful.

  My computer (Dell Inspiron 2200) was relatively slow and I decided to reformat the machine.  After doing that it seems the hard drive was fried in the process that I have been unable to get the machine to boot properly after the reformatting process.  When I ran a diagnostic on the computer, a message was also discussed more leading to believe that this was the case.  This is why I took an old hard drive that I had and tried to use it on the machine.  I created a Windows startup disk by downloading the file and burn a disk.  I changed the order of BIOS to move the CD drive first on the list and the error "remove disks or other media."  " Press any key to restart" continues to be displayed.  Please help me

  Thank you

  A HD is fried in any reformatting/installation process.

  You don't need to create any gain of boot floppies, you just need your convalescence winxp / installation disks to prepare your drive for installation

• Error - loading at start-up, my computer is giving a "loading error" «press any key to restart...» »

  At start-up my Sony Vaio with XP is to give a "load error" "press any key to restart '. .  Pressing a button any does not help.  I shut the computer down at least five times, and I get the same message every time. Help

  REX

  I ran fixmbr too, but you don't need to contact your manufacturer for assistance.

  It is extremely unlikely that any computer purchased at a store bought on this planet will have installed XP Recovery Console.

  It is extremely unlikely that any computer purchased at a store bought on this planet will be accompanied by a genuine XP installation CD bootable that can be used to start the XP Recovery Console.

  It's extremely likely that any manufacturer on this planet will send you an installation CD XP genuine for you can start in the Recovery Console.

  It is extremely likely that the majority of the posters on the forums is not any type of bootable XP media.

  It is extremely likely that the majority of the posters on the forums have never actually seen, possessed or otherwise come into contact with an XP bootable installation CD authentic in their lives, or if they already had in their possession, it is now nowhere to be found.

  I wonder why never support engineers offer this idea for the Recovery Console.

  (a) they do not know how
  (b) they are not allowed to post anything that isn't in a KB article
  (c) they are not allowed to post links to any place outside of Microsoft
  (d) your idea here

  You can make a bootable CD of XP (no XP media required) Recovery Console.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

• A short key to restart Win7?

  For XP, there is a short key to restart the window

  Window button > U > R

  but this trick does not work on Win7.

  Does anyone have suggestions on what is the short key for Win7?

  Thanks in advance for your suggestions

  Windows logo key arrow to the right, twice, and according to the place where the restart button up arrow or enter.

• "No devices found, startup click on any key to restart Machine." & "audit of the media [impossible]. & ":( Your PC of Ran into a problem & needs to restart. "Error messages occur every hour.

  Hello

  I was browsing the web when suddenly an error message came up saying ": () your PC of Ran into a problem and must restart." We are only collecting the error information, and then we'll restart for you (0% complete). If you want to learn more, you can search online later to this error. KERNEL_DATA_INPAGE_ERROR"then he gave a black screen and says"Checking Media [Failed] ". Then he showed the logo Dell my computer, (the usual start screen), and then the screen disappeared. About 5 seconds later, another black screen (just like the "[Failed] Media Control" screen came saying "No Boot Device Found, Click Any Key To Reboot Machine".) I follow on the orientation of the screen for about 5 minutes and it kept giving me the same screens over and over again, no change there view. So I turned off my laptop, waited 30 seconds, back running the computer and he gave "[Failed] Media Control" Message twice, he disappeared and the Dell splash screen came again, he let me not log my computer as usual. This happened to me twice now, and it's extremely frustrating, because now I can't be on my computer for more than a half hour at a time without him doing this again. Also I can't scan the computer for viruses, it's 15 minutes to finish scanning and I get the message 'PC Ran into A Problem'. Can someone please help me understand why this is happening? Very much appreciated.

  -Austin screw

  Hello

  I apologize for the late response.

  What is the current status of the issue?

  Unplug all external devices connected to the computer except the mouse and keyboard and check for the issue.

  I also suggest you to start the computer in safe mode and check.

  Start settings for Windows (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

  KERNEL_DATA_INPAGE_ERROR error code indicates that the data page of the kernel of the required paging file cannot be read into memory. It could have happened due to graphics card drivers.

  Bug CRITICAL_PROCESS_DIED control has a value of 0x000000EF. This indicates that a critical system process died.

  See also:

  Bug Check 0x19: BAD_POOL_HEADER
  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff557389 (v = vs. 85) .aspx

  If you are able to start the computer in safe mode, we need to collect some newspapers of the dump files created to analyze.

  Hope this information helps. Response with status so that we can help you.

• Disk error, press any key to restart

  Hello

  In the last week or so when I turn on my computer, it goes through the boot sequence, then just before its loading Windows, I get the following:
  "Disk error".
  Press a key to reboot ".
  Once, I press any button that displays the Windows Logo and Windows starts up.
  Last night I ran a check local disk, and this morning when I woke up it was back to the black screen with the message.
  Does anyone have any suggestions?
  Thank you very much.

  I have a suggestion.

  Buy a new HDD and clone the content across to the new drive using this program...

  http://www.TODO-backup.com/

  If you now, it will be a breeze. Everything will work as before and you will always have your recovery partition.

  If we leave it until the problem gets worse, you may well end up having to run CHKDSK constantly, files, folders and partitions can get corrupted and you will lose access to your recovery partition for good...

• I have a popup that says that I have a virus he locked a tab in safari. How can I restart safari without open tabs

  I have a popup that says that I have a virus he locked a tab in safari. I suspect the popup is a phishing attempt, and I didn't click on the OK button. I closed Safari, but whenever I have restart Safari he wants to open the tab with the context menu. How can I restart safari without open tabs? I now tried the SHIFT key while restarting.

  I'm runnning OX 10.8 and Safari 6.x.x

  Thank you

  Blake

  

  Blake,

  Read: Phony 'technical support' / 'ransomware' popups and web pages for a solution.

  

• XP formatted but product key fades a bit and lost the original disk

  I use the eee pc 900 xp home edition I had broken lost and corrupt the virus files once the virus has been removed I bought a repair to recover xp home edition and reinstall disk it ran automatically fornatted and now unfortunately my product key was gone, much as I had about 3 years now , I don't have the original disks all I have the asus eee pc 900 windows xp edition user guide without the faded parts of my product key, I can not turn on is there a way to recover the key? I can see parts of key are F44... CMKBY-VGB7R-DK-COMIC BOOK...
  I also see some of the number above the barcode, if this can help her
  8004302403... The latest figures are missing
  I don't want to upgrade to windows 7 because I can not afford to unfortunately
  Can someone please

  Boot into "Safe Mode with command prompt.

  At the command prompt run type the following EXACTLY

  Rundll32.exe syssetup, SetupOobeBnk

  * NOTE: The "Oo" in Oobe is 'oh' - not 'zero' there is a space after rundll32.exe.

  Press the Enter key

  Restart the PC in normal mode

  I hope that you will now be able to log in and run a report MGADiag and have time to fix the problem.

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag tool
  (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you a) in the case of your machine (or inside the battery compartment), but does NOT quote the key on the sticker!
  http://www.Microsoft.com/en-us/howtotell/hardware.aspx

• When I try to reinstall Windows XP on my Toshiba laptop, it works until I reboot. Then it says nvrd32.sys not found: press any key to continue.

  original title: NVRD32. SYS ERROR

  When I try to reinstall Windows XP SP3 on my Toshiba laptop, it works until the first reboot. When I boot on CD it comes up saying nvrd32.sys is not found: press any key to continue. When I press a key it is said: the Installer failed. Press a key to restart your computer.

  So, I don't know what to do. I tried searching on google and found a set, but talk of computer that I couldn't begin to understand. Basically, what I consider somewhere or can I fix it myself? I just paid for a new disk of Windows XP SP3, so I'm not looking forward to having to pay someone to use it.

  Hello

  ·         Windows XP came preinstalled on your laptop?

  ·         If so, you have a recovery partition?

  ·         Where did you buy the disc of Windows XP SP3 for?

  nvrd32.sys file is a chipset driver and must be installed via floppy F6 during initial installation.

  Method 1: To do this, follow these steps.

  a. you can download the chipset drivers from Toshiba Web site and copy it to a floppy drive.

  b. press F6 at the start of the installation of Windows XP.

  c. follow the on-screen instructions to install the drivers for the chipset.

  Method 2: You can contact Toshiba to restore to factory on the laptop.

• Periodically remove the registry keys with the Task Scheduler?

  I wonder if it is possible to create a batch script or similar small program to periodically delete the registry keys, specifically:

  [HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\CurrentVersion\TrayNotify]
  "PastIconsStream".

  [HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\CurrentVersion\TrayNotify]
  "IconStreams".

  A little history on why I want to do this:

  My computer is configured to dual boot (Vista and Fedora Linux), with a score of shared data.  I also use Dropbox for a group of records.  It complicates things with a system dual boot because the folder name is different in each system (vs My Dropbox Dropbox).  I worked around this by creating hubs and symbolic links in each operating system of 'real' folders to default Dropbox folders as appropriate.

  This works as expected. The only problem is that Windows Dropbox does not monitor files for changes and checks only when the program starts.  To work around this problem, I created a small script that kills Dropbox and scheduled to run every half hour using the Scheduler of tasks, followed by a task to start Dropbox.

  The only problem with this is that over time I find myself with hundreds of copies of the Dropbox icon in the status bar Notification area.  I found some instructions to reset the cache of the icon, which is to remove the two above mentioned registry keys and restart the Explorer.  So my question (finally!) is really about if there is a way to automatically reset it one or twice a day, rather than manually deleting the key each time that I remember.

  Of course, if there is a better/more way to deal with this, I'm happy to hear about it!

  Hi Mander,.

  Editing the registry, especially using a batch file and the Planner is, in my opinion, a little dangerous. After all, a bad move a your system registry key could easily be paralyzed.

  I don't really know if my suggestion would be to use or not, but it's worth a try. There is a (free) third-party application called CCleanerwww.ccleaner.com it effectively removes temporary internet files, history, cookies, index.dat file and a host of other things too. An option available in the "Advanced" tab Windows section is to clear the "tray notification cache. Do you think that this is likely to help solve your problem without needing to run a batch file? It's only a suggestion like the registry rated - is not my field, but, like I said the app will costs you nothing and it is certainly worth giving it a try. It can do what you want it to do. Just a suggestion!

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• How can I get my NumLock key to stay after closing down?

  y at - it a way to keep the Numlock key to restart the computer?  Before I had windows 7 loads, it wasn't a problem.  

  "cheryllynn" wrote in message news: 227ef5ef-2e24-447 c-9304-be378d292531...

  > Where can I find 'registry editor '?

  His name is regedit.exe and you can get to by typing in the search
  box of the start menu.

  However, to be * very * careful. Whatever you do in regedit is saved
  immediately, and a mistake can leave you with a computer that won't start raining.

  --
  Ken Blake, Microsoft MVP (Windows desktop experience) since 2003

  Ken Blake

• Valid product key for Halo 2 for Vista

  I get a "invalid product key" for Halo 2 for Vista. I troubleshooted it to clear my internet cache. Check the product key and restarting the computer without service. I called Microsoft and they said they no longer support Halo 2 phone support and that I have to post here to get a new product key...

  Hello

  We have a dedicated team that leans on issues with Halo 2 for Vista.

  You can post the question here:

  http://forums.haloonwindowsvista.com/forums/

• Then after the bitlocker key - system requiring each time?

  Now, whenever my daughter wants to use its Surface she needs to re - enter the key and restart the system. How to do this, go to reuse normally Surface?

  There are several reasons not to use bitlocker and even if your situation is not normal in my humble OPINION, you should remove it.  If a single bit of data is damaged in the key or program you will lose access to all computer/OS

• I use Photoshop Elements on an imac, and it has stopped working. I don't know the product key number.

  I've been using Photoshop elements in an imac for nearly two years without problem. There is a month program during startup, or when I get home in the finder and asking a .jpg file to open in the elements to note: "Photoshop elements 12 Publisher has closed unexpectedly"... the following computereeze:

  ATH:	/ Applications/Adobe Photoshop elements Editor.app/Contents/MacOS/Adobe Photoshop elements 12 12 Editor
  Identifier:	com.Adobe.pse12editor
  Version:	12.0 (12)
  Item App ID:	768610744

  The external application ID: 192852631

  Code type:

  X 86-64 (native)

  Parent process: launchd [257]

  Responsible:	Adobe Photoshop elements 12 Publisher [6252]
  ID of the user:	70 s

  Date/time:	2016-01-12 13:44:10.714-0800
  OS version:	Mac OS X 10.9.5 (13F1507)

  Report Version: 11

  Anonymous UUID: 795E156E-BE05-59F7-984C-6BF8C7B7AA60

  Sleep/wake UUID: D5BAA4E5-1E31-4CCB-A7BA-6A8A1C132F7E

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_BAD_ACCESS (SIGSEGV)

  Exception codes: KERN_INVALID_ADDRESS at 0x00000000000000b1

  VM regions near 0xb1:

  ->

  __TEXT

  0000000100000000 00000001030d 0000 [48.8 M] r-x/rwx SM = COW/Applications/Adobe Photoshop elements Editor.app/Contents/MacOS/Adobe Photoshop elements 12 12 Editor

  Thread 0 crashed: Dispatch queue: com.apple.main - wire

  0 com.yourcompany.ems		0x0000000103cc431d engine_unlocked_finish + 13
  1 com.yourcompany.ems		0x0000000103cc44f8 ENGINE_finish + 88
  2 com.yourcompany.ems		0x0000000103cd2552 EVP_PKEY_free + 98
  3 com.yourcompany.ems		0x0000000103cde2d5 pubkey_cb + 21
  4 com.yourcompany.ems		0x0000000103ce2673 asn1_item_combine_free + 531
  5 com.yourcompany.ems		0x0000000103ce276d ASN1_template_free + 141
  6 com.yourcompany.ems		0x0000000103ce264b asn1

  I have no idea how to find my product key or restart the program.

  There has been recent technical problems with Apple, with the only version of the editor. Go to this link:

  Fix the App Store

• Troubleshooting with macOS Sierra

  Hello community!

  I recently installed macOS Sierra on my MacBook Pro retina (Retina, 13-inch, mid-2014 with 2.6 GHz Intel Core i5, memory 8 GB 1600 MHz DDR3 and SSD 256). My MacBook is having hanged very often (after every 30 minutes) especially when I use Safari [version 10.0 (12602.1.50.0.10)] with several tabs. Please help me to provide appropriate advice.

  Restart in safe mode

  Try safe mode if your Mac does not end commissioning - Apple Support

  then open safari while holding the SHIFT key,

  restart normally.

  If the problem persists you can publish a report of etrecheck for further analysis.

  www.etrecheck.com