Problems with LSI MegaRaid 9260-8i and ESXi 4.1
Hello
It's my first dappled in virtualization and got everything works pretty well for me except for one thing: esxi 4.1 does not allow me to use all the storage I allocated on my table of RAID5 on my LSI MegaRaid 9260-8i card. When I go in the vSphere client and try to create a data store, it recognizes the 2.73 TB logical drive except when it creates it is only 739,5 GB in size. Am I missing something here? I can't expand it, and it doesn't seem to be running from one of the physical disks, I have attached a few screenshots to illustrate the problem.
Thanks for any help in advance!
You create scopes of 2T and assemble them.
I had to do this:
localhost > /c4 set autocarve = on
localhost > / c4 add type = disk = 0-3 name = RAID0 raid0
localhost > / c4/u0 show
Unit status % RCmpl %V/I/M VPort UnitType band Size (GB)
------------------------------------------------------------------------
U0 RAID-0 OK - 256K 5587.89
U0-0 DISK OK - p0 - 1396.97
U0-1 DISK OK - p1 - 1396.97
U0-2 DISK OK - p2 - 1396.97
U0-3 DISK OK - p3 - 1396.97
U0/v0 Volume - 2048
U0/v1 Volume - 2048
U0/v2 Volume - 1491.89
Then you can create the data store by using three volumes. Create it with the first, and then increase with the other two.
Tags: VMware
Similar Questions
-
Problem with RDM, Disc 3 to and ESXi 6
Hello
I followed this guide to my local 3 TB drive to work with ESXi 6.
VMware KB: Raw Device Mapping for local storage
But when I use the command
vmkfstools - z/vmfs/devices/drives / < diskname > vmfs/volumes / < datastorename > / < vmfolder > / < vmname > hard
I get this error.
Unable to create the virtual disk: the destination file system does not support large files (12).
Any advice on how to fix this?
PROBLEM SOLVED!
vmkfstools -z /vmfs/devices/disks/t10.ATA_____WDC_WD30EFRX2D68AX_________________________WD2DWMC1T1096 /vmfs/volumes/datastore1/3TBRDM.vmdk
I didn't understand that I had to add the datastore1 folder and put the hard file. I'm quite new to this kind of things.
-
LSI MegaRaid 9240-8i on ESXi 5.0 MegaCli
I've implemented an ESXi 5.0 with LSI MegaRaid 9240-8i controller machine. The controller works fine and I was able to load the PMI provider such as the controller is displayed correctly in the State of health. But I really want to be able to use the MegaCli command line tool. I loaded the MegaCli executable but when I run it it fails ask libstorelib.so. Does anyone know what I should charge for making available? I searched throughout sites LSI and Vmware and am not finding anything.
Thank you
Cameron
Copy the file from a host ESXi 4.1 existing. its under file/lib. Also when you not copy to copy to a volume vmfs or NFS/lib I did once and restarted, poof gone, had to re do it again
Here are some pictures that I took when I was upgrading the firmware on my LSI Megaraid 9260 - 8i
-
Are there problems with OS 10.11.4 and opening?
Are there problems with OS 10.11.4 and opening?
Upside down images in the mode list. There is no hope of any problem opening fixing. There will be no further development.
-
Problems with different e-mail addresses and the different Apple ID
Hi, I have some problems with the different Apple ID and e-mail addresses connected to them, and I hope someone can help me in what to do.
First a primer on my Apple ID
***@me.com - it's my account General iCloud (backup, iMessage, Facetime etc.).
***@losmail.no - my iTunes/App account (purchase and download music, app, etc..)
***@me.com: I have no problem connecting to this account (appleid.apple.com, iCloud.com etc etc..)
***@losmail.no: I have no problem connecting to this account in iTunes/App Store. However, I can not connect on appleid.apple.com with this account because he asked me to check the email address. However, this e-mail address use a messaging service that doesn't work anymore, so I can't check it out. Because it is a private messaging service, I want to change the Apple ID on my account @gmail.com.
I believe, however, that the account @gmail.com has been connected to the account @losmail.no because I received my shopping etc. of my account @losmail.no sent to ***@gmail.com. These recipes also "Apple ID: * @gmail.com. When I connect to the account, however, use ***@losmail.no. However, an I said, I want to log on by using ***@gmail.com.
What is strange is that in iTunes / App Store, I can connect with ***@gmail.com. However, this is not the same account as ***@losmail.noand previous purchases / comments etc. are not available. It's strange because said revenues (Ref. above).
An other ting that indicates that the Apple ID where I use ***@losmail.no once was connected to ***@gmail.com, is what happens when I try to log in to ***@gmail.com to appleid.apple.com. Then, I get a message saying that the e-mail address must be verified. I can write the code sent to the ***@gmaiI.com, but it is said then that this e-mail address is already is used by another Apple ID, so it cannot be verified.
So I guess my question is, basically, how I can change the ID of the ***@losmail.no to ***@gmail.com Apple when I can't access the account losmail, but the appleid.apple.com tells me that I need to check this email address.
Best regards
Philippe
Hi phillla,
Thanks for all the details with your accounts.
Can be difficult to have more than one Apple with several e-mails all mixed together. If an email is used with another Apple ID, for example, that e-mail can be used to create a new Apple ID or rename an old.
The analysis of what you seem to have however...
Your purchases are with your *@losmail.no Apple ID, but the emails for this go to your *@gmail.com email address.
*@gmail.com is the primary e-mail address for your Apple ID *@losmail.no.
You can connect to iTunes or manage your page ID with *@gmail.com Apple says it's an Apple ID on its own. As an email address can only be verified for an Apple ID, which means that he must check with your *@losmail.no Apple ID and cannot be verified with *@gmail.com.
You say you can not connect on appleid.apple.com with *@losmail.no you will need to check the email address. You have a relief attached to this ID e-mail? This is the email that would be used to recover. You receive your check or reset email - Apple Support
Bottom line, you want to change your primary Apple ID but outdated to *@losmail.no to *@gmail.com, you must first rename *@gmail.com to something else and delete this email of all codes from Apple as well. Then follow the link above to get access to *@losmail.no and control so that you can rename it.
Best regards.
-
Problems with Windows 10 screen standby and sleep mode
After downloading 10 Windows on my desktop all-in-one HP, I have problems with the display of standby and sleep mode. When the computer turns off, he doesn't have the bright screen.
After the upgrade to Windows 10, some laptops have experienced one or more of the following symptoms:
- > Power LED remains lit after stopping
- > Computer enters standby or hibernation.
HP recommends that customers see these symptoms first update the graphics drivers by removing and then reinstalling the hardware in Device Manager.
See the section updating the graphics driver from where can I find drivers Windows 10 and software for my model?
-
Original title: How can I fix external MSI?
When I try to download the updates, the error message says there is a problem with the external Setup program and it must be closed. Updates will not be installed. Anyone know how to solve this problem...?
Hi John,.
· You are able to install other applications on the computer?
It seems to be a problem with the corruption of the .net framework. I suggest trying to repair the .net framework on the computer and see if you can install the updates.
http://support.Microsoft.com/kb/923100
Hope the helps of information.
-
I'm having a problem with my Windows Media Player and its automatic scoring system.
I'm having a problem with my Windows media player and its rating system. Usually in Windows Media Player the blue side star system only rate once internet-based critical car. Then after playing constant song change the blue stars. However, on my Windows Media Player ratings only to have automatically scored only once and every time I play the song the side remains the same.
Whenever I play a song in Windows Media Player 11 it rates the song but when I play the song again the rating remains the same. It auto-taux only the song once. How can I fix it?
chk this link
How are ratings used in Windows Media Player?
http://Windows.Microsoft.com/en-us/Windows-Vista/how-are-ratings-used-in-Windows-Media-Player
-
Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F
Would you advice, thank you.Hi Hugo,.
1. what anti-virus software you have installed in the computer?
2. What is the full error message/code?
3. the issue occurred after you install Minecraft?
4. are you able to play Minecraft without any problem?
5. what happens with Antivirus and Java?
Windows Update can occur if one or more of the following conditions are met:
1. the Windows Update database is damaged.
2. antivirus software is configured to scan the %Windir%\SoftwareDistribution folder.
3. the service (BITS) Background Intelligent Transfer Service does not receive a content link header.
4. a required system file is incorrectly registered.
5. Windows Installer has encountered an error.
6. the manifesto of component maintenance (EC) is damaged.
7. the Windows Update service has stopped during the installation.
8. a version of the file conflict exists with Windows Update agent files.
Please follow the steps described in the methods to solve the problem:
Method 1: We will try the steps from the following link and check the result:
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:http://windows.microsoft.com/en-US/windows7/Back-up-the-registry
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058?WA=wsignin1.0
Method 2:
To correct the errors that occur when you use Windows Update, install, and run the system update readiness tool. The tool analyzes inconsistencies on your computer and fixes as its current installation.
You can view the following link to download the system update readiness tool and check:
System tool update that corrects problems of Windows Update is available for Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008
http://support.Microsoft.com/kb/947821
Details of the event log to find what caused the Antivirus and Java to fail:
What are the information contained in the logs of the event (Event Viewer)?
http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
Hope that the information provided is useful.
For any help related to this problem or any question of Windows, you can still display in the Microsoft Community Forum!
-
Problems with UAC, Sims 3 downloader and original windows
Problems with UAC, Sims 3 downloader and original windows
I have windows Vista and have been using it for a while to play the sims 3 and download games via original EA downloader/store. I had run a windows update and an original updated in the last days and therefore my sims 3 expansion packs ceased to operate. I uninstalled all and have reinstalled the original game of the downloader of origin and now when I try to download my expansion packs I get an error message saying that windows has prevented the application creates a download directory, please accept the UAC prompt to start to download this game. I approved the promt and they have same message came still high and so I disabled UAC altogether and still got the same error message, I looked on the EA forums and the only line I can find of them our it may be a windows problem (which I doubt)? Can you help me?
Hello
Method 1:
Right click on all of the files and select run as administrator and try to install it.Method 2:
You can try creating a new user account.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profileNote: select the Administration option while creating a user account
Method 3:
You try to run the system restore at the same time that it worked very well.
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restoreI hope this helps. Get back to us with results
-
Separated from this thread.
Joachim
When first pose the problem? Was it before or after the December updates?
KB3004394 and KB3024777 appear in view update history? Or do they appear in installed updates?
Gerry, thanks for your post. I have the same problem as Joachim started this thread. I am running Windows 7 sp1. I have a Dell computer and it's certainly a legitimate copy of Windows (confirmed computer 'properties' and it is enabled).
By your post, I saw just to update and the KB3004394 (installed on 12/10/2014) and KB3024777 (installed on 12/12/2014) show as comfortable. I usually leave the Windows download updates automatically and I install them to stop. I watched the second update and according to Microsoft.com:
Install KB3024777 to fix a problem with KB3004394 on Windows 7 and Windows Server 2008 R2
The KB 3004394 update which was dated December 10, 2014 can cause additional problems on computers that run Windows 7 Service Pack 1 (SP1) and Windows Server 2008 R2 SP1. This includes the inability to install future updates. This new update is available to remove KB 3004394 from your computer.
My problem is, as of today 14/12/2014, I still get the pop up "this computer is running not windows genuine', even with KB3024777 installed.
Any thoughts?
Thank you
Bob C
Right-click on CMD
Click on run as administrator
At the command prompt, type the following commands:
slmgr.vbs - ipk xxxx-xxxx-xxxx-xxxx (to replace the specified in the current product key)
xxxx-xxxx-xxxx-xxxx - represents your product key
Press enter on your keyboard
Then type: slmgr.vbs - ato (this will force the activation)
Leave the command prompt
Restart your computer
-
I have a problem with the Narrator, repeating words and phrases.
original title: NARRATOR in WIN7 SUPPORT
I use windows7. The annoying Narrator sometimes voices repeat words and phrases. I also need help, change of voice and using Narrator to read aloud my text book I downloaded. It is in PDF format.
Original title: Narrator sometimes repeat words and phrases
Hello
Thanks for posting your query in the Microsoft Community.
You have a problem with the Narrator, repeat words and phrases. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.
Please answer these questions-
(1) exactly where you run the Narrator?
(2) the Narrator extends from a particular document?
(3) have you made changes on the computer before the show?
I would like more information about the issue.
Method-
I wish that return you the items for assistance-
Narrator doesn't read what I expect him
http://Windows.Microsoft.com/en-us/Windows7/Narrator-doesn
Hear text read aloud with Narrator
http://Windows.Microsoft.com/en-us/Windows7/hear-text-read-aloud-with-Narrator
Let us know if you need assistance regarding the issue. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.
Thank you.
-
Problem with update of Photoshop, Illustrator and Indesign CS6
Hi all. I have problem with update of Photoshop, Illustrator and Indesign on OSx 10.8.4 CS6. Application are OK but update (bug fixies) does not work. Update failed. (U44M1P7)
Hi El Gondo,
The following could explain and help solve the problem...
U44M1P7 - updates:
http://helpx.Adobe.com/Creative-Suite/KB/error-u44m1p7-installing-upda tes-HYPERLINK
U44M1P7, U44M2P7 - CC help / cannot apply the extensions 6.0.2 update manager | Mac OS:
http://helpx.Adobe.com/Creative-Suite/KB/unable-apply-extension-manage r - update.html
Thank you!
Ankit
-
LSI MegaRAID Storage Manager and Dell PERC cards?
Hi all
I have a Dell PERC 6 / i in my whitebox ESXi 4 server and I seem to be missing some options when connecting to it via the LSI MegaRAID 2.91 Storage Manager - 05. Basically, it seems the only operation I can do is take the disks offline. I have no option to create tables, add/remove disks in bays or change RAID levels.
I can do all these things from the BIOS, this is obviously not the card. I had a glance the BIOS if it was something in TeleManagement prevents there but could not see anything, and I was wondering if these limitations due to a cut the officer of management in ESXi or something? If not, what could be causing the problem? When I log in MSM I use the account root on ESXi and MSM reports that I have full access. As it is MSM is not very good for anything other than general information about my disks, card and backup battery.
When I log in MSM I use the account root on ESXi and MSM reports that I have full access. As it is MSM is not very good for anything other than general information about my disks, card and backup battery.
Have you installed the OEM ESXi version for Dell machines, or just a generic of VM Ware? If you install ESX (with console) you can then install OM, and will give you the access you want. You can manage all of this on the web. Otherwise ESXi is limited, and it is a known issue.
Have you tried to discuss with Dell?
-
problem with my mac pro book and the appstore
I have a problem with my Mac Book Pro (2.53 ghz processor intel core duo / 0sx 10.6.8) and the app store:
My apps no longer works after upgrade on the app store... Help :-(
Restart in safe mode
Try safe mode if your Mac does not end commissioning - Apple Support
Once logged in go to the Terminal
type
Open $TMPDIR... me.
Delete the folder
com AppStore.Apple
Close the terminal
Open the App Store
Maybe you are looking for
-
Equium M40 - cursor usually frozen - Touchpad very erratic
My cursor seems to freeze when the laptop is turned on for awhile (heat?) and then suddenly works again after days and days of frost. Have reinstalled the drivers (which worked for 24 hours), sent to Toshiba last week who has reinstalled everything a
-
15 - d017tu driver Windows 7 32-bit
I need driver HP 15-d017tu windows 7 32 bit OS.
-
Cannot access files Word or picture on Windows XP
Can anyone help? As soon as we try to access a son of file or photo Word on Windows XP, we receive a message saying: "Windows Explorer has encountered a problem and needs to close." The problem started a couple of weeks, every time we tried to open t
-
Touchscreen and keyboard questions? Warranty abroad?
Hi all Recently, I went to the United States and received a Motorola Cliq as a gift from a friend. It has worked perfectly well for recent months, until about an hour before. I used Nimbuzz, when all of a sudden the touchsceen stopped working. So, I
-
Attachments blackBerry Smartphones Blackberry Curve
Hello: Could someone enlighten me how I can transfer an attachment to my Curve smartphone to my laptop? Thank you Donna