ESX Server restarts suddenly

Similar Questions

• DEOs change to the political necessity of round robin to restart the ESX Server

  Hi friends,

  When set politics multi-path set to Round robin, is it necessary to restart the ESX Server?

  Thank you.

  No.... You should see that paths become active after you change the setting.

  André

• ESX 4 restarts randomly

  I have a fairly new ESX environment and server ESX reboot for some reason any.  It restarts once per day, or it is maybe once every two days, but randomly during the day.  This happened for two weeks now.

  I have two Dell PowerEdge R710 run ESX 4.0.0 164009, so we work very well, restart the other.  I thought that I had a problem with an inverter, so I moved ESX server to another UPS and I still have the problem.  First of all, I was running ESXi 4 when I discovered the server restart, so I crushed the two servers and installed with ESX and the problem followed me.  I read a few posts talking about VMs crash the server due to bad RAM, so I ran memtest86 on the server for 10 hours and 12 GB of RAM came back clean.  I have SSH in search for some newspapers group, but I could not found.  The State of the material in the virtual center of clean air, and there is no event under the tasks and events that stand out.  I currently have only two virtual machines running on this host, both running Windows Server 2008 x 64.  They are clean installs and are simply used as two tests so I can monitor when they go down in the NOC.

  Does anyone have suggestions on what precautions should I take next?

  My guess would be that there is a hardware problem.  ESX does not restart only himself.  If there is a problem ESX you would see dumps, so in your case because there is none, I would start by looking at the material.

  Get some hardware diagnostics CD from your hardware vendor and start to run.

• ESX Server does not respond in VCenter

  Hello everyone, I am looking for some help with a problem I have right now.  I was able to find a similar thread, but it was not resolved, so here are my symptoms.

  I have a 3.5 running ESX Server.  In VCenter, the system shows callous and all of the associated virtual machines are disconnected.  However, ESX server and virtual machines are running correctly.  If I try to use the VI Client to connect directly to the ESX box, you receive an error "server has taken too much time to react."  Interface Web doesn't either.  However, the SSL connection via port 22 works fine and I am able to work with the system.  I had this problem before and a reboot of the server ESX solved the problem, but which forced me to all virtual machines down and then reboot ESX.  The ESX box shows no errors when I have ILO on the console.

  Can anyone give me any help is appreciated.

  Have you tried to restart the management agent with

  [for service mgmt-vmware restart

  on the console?

  Kind regards

  Gerrit Lehr

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

• ESX Server 3.5 - strange time problems

  Hello world

  What is the final location, installing a new server ESX will pull its time to go?  It seems complete weird for me!  I just reinstalled the server that I use for testing because the clocks on my hosts are out of sync with ESX server 3 hours.  I know this only because whenever I restarted the clocks would become out of sync even once, I would manually fix them but if I restarted, then they would be out of sync again on restart.

  So I decided to start all over again and reinstalled.  I also noticed that the time on the BIOS was out of sync by 3 hours, so I fixed that, then during the installation, I used the GUI and ensured to this that all settings are correct.  I started and submitted my top vmdk files. Add a server to the inventory and ba-boom, it's always an hour out of sync!  If I put it to an internet time server synchronization in windows, it corrects itself, but is incorrect once again after a reboot.

  If I use VMWARE tools to synchronize with the host computer then the time is an hour off the coast.

  Please keep in mind, I'm a windows guy, this great process of setting the time using putty is a little hard to swallow.  Is there not an easier way to simply see what time the host uses and correct?

  Thank you.

  First when you install it gets it from the BIOS. Then when you have done this, you will want to configure NTP on the HOST. This by going to the tab "configuration" and then "time Setup". You can use the following internet time servers (just put you company firewall or something else allowing of course) 0.pool.ntp.org 1.pool.ntp.org 2.pool.ntp.org. The implementation is very easy and it will make sense to you that you do. Also, it will make ESX for NTP firewall when you submit.

  So you want if sure is installed on your windows guests and the value of the box sync with the machine virtual host of the vm tool. Important, disable the windows time service.

  Do this and your windows host will keep time properly.

• How to manually configure the IP, subnet, gateway on the new NIC in ESX Server 3.5

  Hello, first let me say that I am relatively new on ESX Server and so the question I ask here may seem trivial but I looked through the documentation and other threads and that you have not found quite what I'm looking for.

  I have an ESX Server 3.5 with a number of production virtual machines running works very well.  I need to install a second NETWORK adapter because my use of the network will go through the roof, once I convert a production server used in a virtual machine on this machine.  I have a server Dell PE 2950 and I bought an Intel Pro/1000 PT dual port PCI-e adapter that is on the list of hardware supported.  In the reading I did, every reason to believe that when I set up the server, the new network cards will appear in the VIC where I can assign to a new Vswitch and so forth, so I get it.  What I don't see in the VIC is a way to specify the NETWORK adapter settings.

  The problem is that the switch I connect to, put in place by our network management staff, will not be DHCP settings of NETWORK card for me, I have to manually configure the IP, subnet and gateway until I can start talking.  When I initially installed ESX, I was able to provide all parameters of NETWORK card installation - which is not the case now with the new NETWORK card and the operating system all this up and running.  How do I do this?  Thanks for any help.

  ... BillH

  Adding another physical NETWORK card to your vSwitch will make this new Teddy to comply with policies of vSwitch.  In particular, the load balancing algorithm will determine how the additional bears will get used.  By default, this is done with switch port ID.  This means that each vm NIC that feeds, will choose the next available bear to talk about.  The virtual NIC will essentially be Robin and choose the next Teddy online to talk it through and will so remain like that until a failure condition occurs, or the virtual machine is restarted.

  If you know a particular VM is a high user of I/O, and you want to separate its traffic from the rest of your virtual machine, and then create a new portgroup on vSwitch0, assign this new portgroup 3rd Teddy and use the other two as before.  In addition, in your regular exchanges, remove or make sleep 3rd Teddy.  In this way you completely isolate the heavy vm from the rest of your systems.

  -KjB

  VMware vExpert 2009

• How to control vmotion license to the ESX Server

  I have 5 servers ESX 3.5 U3 in my vCenter.  Two are using host license and three are in a cluster and using the server license assigned by my license server, that runs on vCenter.  However, my ESX servers two stand alone using the host license receive a license of vmotion by my license server and my ESX servers in my cluster but cannot get a license of vmotion because their attributed to the wrong ESX Server.

  How can I get the vmotion license released by the ESX servers who don't need and make it available on my ESX Server who need?  My three ESX servers in cluster shared storage for vmotion and don't have my two stand alone ESX servers.

  I tried simple things, like the disconnection of servers and ESX servers in reconnection vCenter, re-reading of license files, restart the license server, etc..  license and vCenter server is 2.5 U4.

  Thanks in advance.  Jim

  go to the configuration tab and click Networking, you have a Port VMkernel configuration?  If so, edit click the vSwitch properties, change your VMkernel port settings and uncheck the box that says VMotion: enabled.

• ESX SERVER is not responding

  I think the HA agent follwing error on ahvmserver01. .. * in the cluster has an error. I restarted the ESX Server and I'm still unable to my operational vms

  Take a look at these two links:

  http://communities.VMware.com/thread/144928

  http://communities.VMware.com/thread/73607

  Hope this helps

• How can I change DHCP to static IP address for my ESX Server?

  Hi all:

  because of my mistake, I configured the ESX for DHCP server.

  So, how can I change DHCP to static IP address for my ESX Server?

  Thank you very much.

  hihiy

  Hello

  You can assign static IP using the below command

  esxcfg-vswif - i

  Restart the network service

  restart of the #service network

  Try this command to list the IPconfig

  #esxcfg - vswif - l

  Hope this helps!

• MacBook pro 13 '' end 2013 display is distorted, restarts suddenly

  I have a Macbook Pro 13 "end of 2013 (ME864TU/A)

  I meet sudden reboots, which was not only a big problem lately, but he began to do this quite frequently, and now my screen gets distorted before those

  sudden reboots. And now, after the last restart suddenly, my left USB does not recognize any device. (My mouse was connected to there for 6 months and worked very well, and I used this port with my drive external HARD, not that too does not work). While what is happening, I look at something or listening to music, so I think that it is not connected to the programs I use. It does not occur on a specific program. It's just random.

  I am really frustrated. This happened to me before, and the top box Service modified Apple (I think it contains, keyboard, drums and some other hardware) and it seems to work fine until last week.

  I would add here last kernel log.

  Anonymous UUID: F182A62B-41DD-C906-A7FA-C88D6A6FDFBA

  Wednesday 30 March 14:40:11 2016

  Panic report *.

  panic (cpu 1 0xffffff80101254ce appellant): "an element of the liberated area has been modified in the kalloc.96 area: expected 0xffffff801bec2b40 but found 0xffffff801bec3b40, changed locks 0x1000, at offset 0 96 in the element 0xffffff801beab360, cookies 0x3f00110ae2626138 0x53521b50f8e732b"@/Library/Caches/com.apple.xbs/Sources/xnu/xnu-3248.30.4/osfm k/kern/zalloc.c:503.

  Backtrace (CPU 1), frame: return address

  0xffffff90abdb3740: 0xffffff80100df792

  0xffffff90abdb37c0: 0xffffff80101254ce

  0xffffff90abdb3830: 0xffffff8010124f76

  0xffffff90abdb3870: 0xffffff8010123c02

  0xffffff90abdb39a0: 0xffffff8010309c36

  0xffffff90abdb3be0: 0xffffff801030a3f0

  0xffffff90abdb3f60: 0xffffff801062a731

  0xffffff90abdb3fb0: 0xffffff80101f0a36

  Corresponding to the current thread BSD process name: mdworker

  Mac OS version:

  15 D 21

  Kernel version:

  15.3.0 Darwin kernel version: Thu Dec 10 18:40:58 PST 2015; root:XNU-3248.30.4~1/RELEASE_X86_64

  Kernel UUID: DECC9F02-27D7-31F0-9599-A9EF2873902C

  Slide kernel: 0x000000000fe00000

  Text of core base: 0xffffff8010000000

  Text __HIB base: 0xffffff800ff00000

  Name of system model: MacBookPro11, 1 (Mac-189A3D4F975D5FFC)

  Availability of the system in nanoseconds: 81518986250

  last load kext to 8488530171: org.virtualbox.kext.VBoxNetAdp 5.0.16 (addr 0xffffff7f92b9e000 size 28672)

  kexts responsible:

  org.virtualbox.kext.VBoxNetAdp 5.0.16

  org.virtualbox.kext.VBoxNetFlt 5.0.16

  org.virtualbox.kext.VBoxUSB 5.0.16

  org.virtualbox.kext.VBoxDrv 5.0.16

  com.logitech.driver.LogiGamingMouseFilter 1

  com.driver.LogJoystick 2.0

  com.apple.driver.AudioAUUC 1.70

  com.apple.driver.X86PlatformShim 1.0.0

  com.apple.driver.AGPM 110.20.22

  com.apple.driver.ApplePlatformEnabler 2.6.0d0

  com Apple.filesystems.autofs 3.0

  com.apple.driver.AppleGraphicsDevicePolicy 3.7.7

  com.apple.driver.AppleUpstreamUserClient 3.6.1

  com.apple.driver.AppleOSXWatchdog 1

  com.apple.driver.AppleHDAHardwareConfigDriver 272.51.3

  com.apple.driver.AppleHDA 272.51.3

  com.apple.driver.AppleMuxControl 3.12.6

  com Apple.Driver.pmtelemetry 1

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.iokit.IOBluetoothSerialManager 4.4.3f4

  com.apple.driver.AppleLPC 3.1

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.3f4

  com.apple.driver.AppleBacklight 170.8.8

  com.apple.driver.AppleSMCLMU 208

  com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

  com.apple.driver.AppleThunderboltIP 3.0.8

  com.apple.driver.AppleMCCSControl 1.2.13

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.AppleHV 1

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  com.apple.driver.AppleFIVRDriver 4.1.0

  com.apple.driver.AppleCameraInterface 5.41.0

  com.apple.driver.AppleIntelHD5000Graphics 10.1.2

  com.apple.driver.AppleIntelFramebufferAzul 10.1.2

  com.apple.iokit.SCSITaskUserClient 3.7.7

  com.apple.iokit.IOBluetoothUSBDFU 4.4.3f4

  com.apple.driver.AppleUSBStorageCoexistentDriver 3.7.1

  com.apple.driver.AppleUSBCardReader 3.7.1

  com.apple.driver.AppleUSBTCButtons 245,4

  com.apple.driver.AppleUSBTCKeyEventDriver 245,4

  com.apple.driver.AppleUSBTCKeyboard 245,4

  com.apple.driver.CoreStorageFsck 517.20.1

  com.apple.driver.AppleFileSystemDriver 3.0.1

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 38

  2.8.5 com.apple.iokit.IOAHCIBlockStorage

  com.apple.driver.AppleAHCIPort 3.1.8

  com.apple.driver.AirPort.Brcm4360 1020.17.1a1

  com.apple.driver.AppleSmartBatteryManager 161.0.0

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleACPIButtons 4.0

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleACPIEC 4.0

  com.apple.driver.AppleAPIC 1.7

  com Apple.NKE.applicationfirewall 163

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.iokit.IOUSBUserClient 900.4.1

  com Apple.kext.Triggers 1.0

  com.apple.driver.DspFuncLib 272.51.3

  com.apple.kext.OSvKernDSPLib 525

  com.apple.driver.AppleSMBusPCI 1.0.14d1

  com.apple.driver.AppleGraphicsControl 3.12.6

  com.apple.driver.AppleHDAController 272.51.3

  com.apple.iokit.IOHDAFamily 272.51.3

  com.apple.iokit.IOAudioFamily 204.3

  com.apple.vecLib.kext 1.2.0

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.3f4

  com.apple.driver.AppleBacklightExpert 1.1.0

  com.apple.iokit.IOBluetoothFamily 4.4.3f4

  com.apple.driver.IOPlatformPluginLegacy 1.0.0

  com.apple.driver.X86PlatformPlugin 1.0.0

  com.apple.driver.IOPlatformPluginFamily 6.0.0d7

  com.apple.driver.AppleIntelLpssUART 2.0.59

  com.apple.iokit.IOSerialFamily 11

  com.apple.driver.AppleThunderboltEDMSink 4.1.1

  com.apple.driver.AppleThunderboltDPOutAdapter 4.1.3

  com.apple.driver.AppleSMBusController 1.0.14d1

  com.apple.driver.AppleSMC 3.1.9

  com.apple.driver.CoreCaptureResponder 1

  com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

  com.apple.iokit.IOSurface 108.0.1

  com.apple.iokit.IONDRVSupport 2.4.1

  com.apple.AppleGraphicsDeviceControl 3.12.6

  com.apple.iokit.IOAcceleratorFamily2 205,1

  com.apple.iokit.IOGraphicsFamily 2.4.1

  com.apple.iokit.IOUSBMassStorageClass 4.0.2

  com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.7

  com.apple.iokit.IOUSBMassStorageDriver 1.0.0

  com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7

  com.apple.driver.usb.IOUSBHostHIDDevice 1.0.1

  com.apple.driver.usb.AppleUSBHub 1.0.1

  com.apple.driver.AppleUSBMultitouch 250,5

  com.apple.iokit.IOUSBHIDDriver 900.4.1

  com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1

  com.apple.driver.CoreStorage 517.20.1

  com.apple.driver.AppleUSBMergeNub 900.4.1

  com.apple.driver.AppleXsanScheme 3

  com.apple.iokit.IOAHCIFamily 2.8.1

  com.apple.driver.AppleThunderboltDPInAdapter 4.1.3

  com.apple.driver.AppleThunderboltDPAdapterFamily 4.1.3

  com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2

  com.apple.driver.AppleThunderboltNHI 4.0.4

  com.apple.iokit.IOThunderboltFamily 5.1.0

  com.apple.iokit.IO80211Family 1110.26

  com.apple.driver.mDNSOffloadUserClient 1.0.1b8

  com.apple.iokit.IONetworkingFamily 3.2

  com Apple.Driver.corecapture 1.0.4

  com.apple.driver.AppleIntelLpssGspi 2.0.59

  com.apple.driver.AppleIntelLpssDmac 2.0.59

  com.apple.driver.AppleIntelLpssI2C 2.0.59

  com.apple.driver.usb.AppleUSBXHCIPCI 1.0.1

  com.apple.driver.usb.AppleUSBXHCI 1.0.1

  com.apple.iokit.IOUSBFamily 900.4.1

  com.apple.iokit.IOUSBHostFamily 1.0.1

  com.apple.driver.AppleUSBHostMergeProperties 1.0.1

  com.apple.driver.AppleEFINVRAM 2.0

  com.apple.driver.AppleEFIRuntime 2.0

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.iokit.IOSMBusFamily 1.1

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 417.2

  com.apple.iokit.IOStorageFamily 2.1

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.driver.AppleACPIPlatform 4.0

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com.apple.kec.Libm 1

  com Apple.KEC.pthread 1

  com Apple.KEC.corecrypto 1.0

  Model: MacBookPro11, 1, MBP111.0138.B16 of BootROM, 2 processors, Intel Core i5 2.4 GHz, 4 GB, MSC 2.16f68

  Graphics card: Intel Iris, Iris Intel integrated

  Memory module: BANK 0/DIMM0, 2 GB, DDR3, 1600 MHz, 0x802C, 0x344B54463235363634485A2D314736453120

  Memory module: BANK 1/DIMM0, 2 GB, DDR3, 1600 MHz, 0x802C, 0x344B54463235363634485A2D314736453120

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0 x 112), Broadcom BCM43xx 1.0 (7.21.94.136.1a1)

  Bluetooth: Version 4.4.3f4 16616, 3 services, 18 aircraft, 1 incoming serial ports

  Network service: Wi - Fi, AirPort, en0

  Serial ATA Device: APPLE SD0128F, 121,33 GB SSD

  USB device: USB 3.0 Bus

  USB Device: Card reader

  USB device: Apple keyboard / Trackpad

  USB device: Hub BRCM20702

  USB Device: USB Bluetooth host controller

  Bus crush: MacBook Pro, Apple Inc., 17.2

  USB works now, I guess it was just a coincidence.

• Error: wininit lsass.exe windows server restart, event ID: 1000, 1001, 1015, 6005, 6006

  Hi everyone, I recently joined in a Banking Corporation as a leader of IT below support that I explained about an error that is impossible to fix.

  This company is running windows server 2008 r2 standard 64 bit OS sp1.

  HP proliant DL380 G7 intel xeon
  system processor: intel xeon E5620

  This company is facing this problem since April 2014 to cultivate the date, but the question not yet fixed because there is no COMPUTER administrator in this endeavour to maintain this server. So, in this company, I'm the only guy with COMPUTER knowledge and my management was waiting for me to fix this error and to run the server without any problem.

  The last few months I've corrected several server issues related in this society as windows update, windows daily backup, SQL server backup, user permissions, disk space low and network troubleshooting and equipment computer issues etc...,

  But come to this lsass.exe I am unable to solve this problem I tried many ways to research online, but not yet fixed. Below you will find the details.

  *) fix for windows server 2008 R2 Standard sp1

  After the failed to install installation
  Fix for Windows (KB2545850)

  *) Tried to use the system tool
  But failed to solve problem

  *) I tried this command at the command prompt
  sfc/scannow
  result
  Full check of 100%.
  Windows resource protection did not find any breach of integrity.

  *) I also tried to change the registry of one of the web links of dell values, but there is no change at all.
  http://www.Dell.com/support/article/us/en/19/SLN291309/en

  *) I thought installing the fix and some other updates in safe mode only to try my luck, but when I tired to start the server in safe mode it takes a long time to start in it. But, I'll try again if this issue is going to fix through safe mode then please advise me on this.

  So to come back to this question, at the time of the restart, a small window will pop up as below.
  Windows has encountered a critical problem and will restart automatically in a minute. Please save your work now.

  *) I tried this in shutdown command prompt cmd - to stop this judgment but does not any.

  *) I've tried many ways to solve this problem, but none of them worked for me even I tried to upgrade from sp1 to sp2 but could not do so for the following reason:
  https://www.Microsoft.com/en-US/Download/details.aspx?ID=17669

  After downloading the software from the link above and when I tried to install error appear below.
  This service pack does not apply to the version of windows running on this computer.

  It is the only question that is impossible to fix. So, I need expert help to resolve this issue as soon as POSSIBLE.

  Note: I can not reinstall the operating system on this server because it runs many applications on the SQL 2008 database and also it is already configured with many services and I don't really know how many applications do I need to take a backup and how to configure manually. so if I reinstall OS and if I'm bored configurations or settings and then it will be difficult for employees who work on these applications. So I don't want to take the risk of doing as I said I am new to this company.

  Additional information: this sever when ever it will pop up as server will restart in one minute then it restarts to 3 times without any gap, then after an interval extended from 3 to 4 hours, then it will follow even as I said above. To understand better, I'll give you this good example: If the server restart to 09:00, then 2nd reboot will be at 09:02 and the 3rd reboot will be at 09:04 and then after 3 to 4 hours apart, as about 13:00 it restarts again for 3 times vice versa.

  Even I understand that I have to reinstall the OS to fix this stupid problem which is like a nightmare for me, but right now, I can't. So, please help me to solve this problem without reinstallation of server operating system.

  I expect the best answer to my question that will solve my problem without any problem to this server.

  Below the five examples are the main reason for my server restart. If you need anything that either more information please advice me I will answer according to your instructions.
  Event ID 1000
  Event ID 1001
  Event ID 1015
  Event ID 6005
  Event ID 6006

  Below, I have collected more information of the observer of events and even from now this server restarts again due to this error, I don't know what to do...!

  1st error:

  -System
  -Supplier
  [Name]  Application error
  -Event ID 1000
  [Qualification] 0
  Level 2
  Working 100
  Keywords 0 x 80000000000000
  -TimeCreated
  [SystemTime] 2016-02 - 11 T 07: 30:33.000000000Z
  EventRecordID 479745
  Application of channel
  Security
  -EventData
  Lsass.exe
  6.1.7601.18443
  5348920c
  ntdll.dll
  6.1.7601.18247
  521eaf24
  C0000374
  00000000000c 4102
  220
  01d16482b15bac9c
  C:\Windows\system32\lsass.exe
  C:\Windows\SYSTEM32\ntdll.dll
  5518c7e0-d091-11e5-88FE-68b5996a1808

  1 details of the error:

  The failing application name: lsass.exe, version: 6.1.7601.18443, time stamp: 0x5348920c
  The failed module name: ntdll.dll, version: 6.1.7601.18247, time stamp: 0x521eaf24
  Exception code: 0xc0000374
  Offset: 0x00000000000c4102
  ID of the process failed: 0 x 220
  Start time of application vulnerabilities: 0x01d16482b15bac9c
  The failing application path: C:\Windows\system32\lsass.exe
  The failed module path: C:\Windows\SYSTEM32\ntdll.dll
  Report ID: 5518c7e0-d091-11e5-88fe-68b5996a1808

  2nd error:

  -System
  -Supplier
  [Name]  Windows error reporting
  -EventID 1001
  [Qualification] 0
  Level 4
  Task 0
  Keywords 0 x 80000000000000
  -TimeCreated
  [SystemTime] 2016-02 - 11 T 07: 30:33.000000000Z
  EventRecordID 479746
  Application of channel
  Security
  -EventData
  0
  APPCRASH
  Not available
  0
  Lsass.exe
  6.1.7601.18443
  5348920c
  StackHash_802c
  6.1.7601.18247
  521eaf24
  C0000374
  00000000000c 4102
  C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_lsass.exe_6ddcb716254c9cb8578365fbfa251cf472753034_0d1bddf3
  0
  5518c7e0-d091-11e5-88FE-68b5996a1808
  4

  2 details of the error:

  Bucket of error, type 0
  Event name: APPCRASH
  Answer: No available
  Cabin ID: 0
  Signature of the problem:
  P1: lsass.exe
  P2: 6.1.7601.18443
  P3: 5348920c
  P4: StackHash_802c
  P5: 6.1.7601.18247
  P6: 521eaf24
  P7: c0000374
  P8: 00000000000c 4102
  P9:
  P10:
  Attached files:
  These files are available here:
  C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_lsass.exe_6ddcb716254c9cb8578365fbfa251cf472753034_0d1bddf3
  Symbol of the analysis:
  Recheck for solution: 0
  Report ID: 5518c7e0-d091-11e5-88fe-68b5996a1808

  3rd error:

  -System
  -Supplier
  [Name]  Microsoft-Windows-Wininit
  [Guid]  {206f6dea-d3c5-4d10-bc72-989f03c8b84b}
  [EventSourceName]  Wininit
  -EventID 1015
  [Qualification] 49152
  Version 0
  Level 2
  Task 0
  Opcode 0
  Keywords 0 x 80000000000000
  -TimeCreated
  [SystemTime] 2016-02 - 11 T 07: 30:33.000000000Z
  EventRecordID 479747
  Correlation
  -Execution
  [Pr

  ocessID] 0
  [ThreadID] 0
  Application of channel
  Security
  -EventData
  C:\Windows\system32\lsass.exe
  255

  3 details of the error:

  A process of critical system, C:\Windows\system32\lsass.exe, failed with status 255 code.  You must now restart the machine.

  error 4:

  -System
  -Supplier
  [Name]  Microsoft-Windows-Winlogon
  [Guid]  {DBE9B383-7CF3-4331-91CC-A3CB16A3B538}
  [EventSourceName]  Wlclntfy
  -EventID 6005
  [Qualification] 32768
  Version 0
  Level 3
  Task 0
  Opcode 0
  Keywords 0 x 80000000000000
  -TimeCreated
  [SystemTime] 2016-02 - 11 T 07: 35:43.000000000Z
  EventRecordID 479787
  Correlation
  -Execution
  [ProcessID] 0
  [ThreadID] 0
  Application of channel
  Security
  -EventData
  GPClient
  CreateSession
  00000000
  --------------------------------------------------------------------------------
  Binary data:
  In the words
  0000: 00000000
  In bytes
  0000: 00 00 00 00...

  4 details of the error:
  Winlogon notification subscriber takes a long time to handle the notification event (CreateSession).

  error 5:

  -System
  -Supplier
  [Name]  Microsoft-Windows-Winlogon
  [Guid]  {DBE9B383-7CF3-4331-91CC-A3CB16A3B538}
  [EventSourceName]  Wlclntfy
  -EventID 6006
  [Qualification] 32768
  Version 0
  Level 3
  Task 0
  Opcode 0
  Keywords 0 x 80000000000000
  -TimeCreated
  [SystemTime] 2016-02 - 11 T 07: 36:39.000000000Z
  EventRecordID 479792
  Correlation
  -Execution
  [ProcessID] 0
  [ThreadID] 0
  Application of channel
  Security
  -EventData
  GPClient
  116
  CreateSession
  04000000
  --------------------------------------------------------------------------------
  Binary data:
  In the words
  0000: 00000004
  In bytes
  0000: 04 00 00 00...

  Details of the error 5:
  Winlogon notification subscriber was 116 second (s) to handle the notification event (CreateSession).

  Thanks forward,

  SAI

  Hello

  I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  Please do not hesitate to contact us if you have other questions related to Windows.

• VMware ESX server CPU use test alarm

  Hi all

  For a new client, I need to show the alarm and ticket slot functionlity vmware ESX server logging settings

  • Use of the CPU of a server ESX VMW
  • Use of memory for the server ESX VMW

  While I reduced the threshold value of VMW ESX Server CPU use as beloow format

  WARNING - 5% and STDev.warning - 0

  I made this two days before configuration, but still no alarm generated for this rule.

  Help the creation of a test of the abveo metric ESX alarm

  Hi - I ended up having to do such things in the past as well. I just built a virtual machine added lots of processors and memory, then for the CPU, I used the script CPUBusy.vbs from VMware (Google search which) and down it load times so that he began to max real physical processors... For memory, I just opened a massive text file in Wordpad and scroll up and down it. This gave me the circumstances to test the alarms, just don't do as a busy time or use some dev ESX servers... Danny Bravo

• Command updating ESX Server 3i, 3.5.0 build #207095

  I have a server ESX 3i, 3.5.0 build from 207095 and I'm trying to update with the latest patch (ESXe350-201302401-O - SG.zip) which I copied to a folder on the local drive:

  "/ vmfs/volumes/OS-Datastore/Patches / '.

  I run the commands:

  «esxupdate install /vmfs/volumes/OS-Datastore/Patches/ESXe350-201302401-O-SG.zip b»

  ... as well as

  "esxupdate install /vmfs/volumes/OS-Datastore/Patches/ESXe350-201302401-O-SG.zip d.

  ... and it is for me to give a new prompt. That means that means and why I can't update my installation?

  I also extracted the original zip file and created these sub zip files:

  "ESXe350-201302401-I - SG.zip".

  "ESXe350-201302401-T - BG.zip" and

  "ESXe350-201302401-C - SG.zip.

  ... I tried the command on them as anything does not.

  How can I get this patch inistalled?

  What is the right syntax?

  Thanks P.A.!

  Your post led me to the answer here:

  VMware KB: Image of ESXi Server 3.5 June 2011 Rollup CD

  I missed an update and for this reason I have to do a clean install as shown in the link above.

  My version can't do any update or update more!

  What you need to know about the key Secure Update *.

  (

  ESXi Server 3.5 June 2011 Rollup CD image (2000593)

  This Installable CD contains ESX Secure Key Update ESXe350-201012401-I-BG.

  For more information about this fix, see Critical Impact: VMware ESXi 3.5, Patch ESXe350-201012401-I-BG: apply this hotfix to continue to apply patches on the ESXi 3.5 hosts after June 2011 (1030002).

  NOTE: If you have not applied this patch by June 1, 2011, you will not be able to then apply patches. To get your updated hosts up-to-date with ESX Server 3i 3.5 version is to apply this Installable CD as new installation. You can also switch to ESXi 4.0 Update 1 Installable.

  Thanks for your suggestions... at least it has led me to the answer.

  A clean install to come!

• How do you know what was the latest patch installed on VMware ESX Server 3i, 3.5.0 207095

  Hello guys,.

  I've been running an old server that was installed in a test system on workstation DELL - Optiplex GX620 (32 bit).

  During installation, I had to confirgure the file: /usr/lib/vmware/installer/Core/TargetFilter.py to change the following line:

  "interface returned. GetInterfaceType() == ScsiInterface.SCSI_IFACE_TYPE_IDE' as follows:

  "interface returned. GetInterfaceType() == ScsiInterface.SCSI_IFACE_TYPE_ISCSI' this is it worked and I used it for 3 years now. However, right now, I was hoping to be updated with the latest patches and updates and I do not know if I just ESX or ESXi, or what was my last update, and what it takes then.

  I used this command to get the following result:

  # vmware - v

  VMware ESX Server 3i 3.5.0 build-207095

  ... I think that the 3i says I have an ESXi 3.5.0 but build 207095 the buid even as ESXi 3.5.0 patch 5?

  If this is not the case, how should I do to update? What is the KB # I should download?

  I can manage using vSphere Client 5.5 and I can't SSH using PuTTY.

  Note: When I run... "# esxupdate - bundle = ESXe350-201302401-I - SG.zip updated ' of in the folder where his property in the data store, nothing happens... just a new line scrolls.

  Also...

  # esxupdate query

  <? XML version = "1.0"? >

  <>request-response

  < installed packages >

  < package ID = "ESX-207095" >

  firmware < name > < / name >

  < version > 3.5.0 < / version >

  < rel > 207095 < / rel >

  < / packages >

  < package ID = "ESX-CLIENT-204907" >

  < name > viclient < / name >

  < version > 2.5.0 < / version >

  < rel > 204907 < / rel >

  < / packages >

  < package ID = "ESX-TOOLS-207095" >

  < name > tools < / name >

  < version > 3.5.0 < / version >

  < rel > 207095 < / rel >

  < / packages >

  < / packages installed >

  < / request-response >

  # /vmfs/volumes/525300ce-5ff6ad3d-e2ed-0014222aedb7/patches/ESXe350-201302401-O-SG

  ... is there any update for this system? I therefore believe that the patch software etc was not around when I was installing this server in 2010.

  Based on KB http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1014508 you run ESX 3.5 Update 5.

• How to install VIM / or nano on ESX Server.

  Hi I need to configure my server ESX for SNMP / traps and syslogs however when I tried to use nano / Vim

  Nano: not found

  Vim: not found

  When I tried to open the file snmp.xml.

  

  I can understand that it could not be installed but there at - it another editor that I can use?

  Or do I have to put my ESX Server in maintenance mode, and then install the editor?

  Kind regards

  You can use vi, especially if you know vim, vi will not be much difference.