ESX SERVER is not responding

Similar Questions

• ESX Server does not respond in VCenter

  Hello everyone, I am looking for some help with a problem I have right now.  I was able to find a similar thread, but it was not resolved, so here are my symptoms.

  I have a 3.5 running ESX Server.  In VCenter, the system shows callous and all of the associated virtual machines are disconnected.  However, ESX server and virtual machines are running correctly.  If I try to use the VI Client to connect directly to the ESX box, you receive an error "server has taken too much time to react."  Interface Web doesn't either.  However, the SSL connection via port 22 works fine and I am able to work with the system.  I had this problem before and a reboot of the server ESX solved the problem, but which forced me to all virtual machines down and then reboot ESX.  The ESX box shows no errors when I have ILO on the console.

  Can anyone give me any help is appreciated.

  Have you tried to restart the management agent with

  [for service mgmt-vmware restart

  on the console?

  Kind regards

  Gerrit Lehr

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

• Safari throws "Safari cannot open page because the server is not responding" error for most relationships other than Facebook, Google, Youtube and a few other sites on my Macbook Pro. Can anyone help?

  Safari throws "Safari cannot open page because the server is not responding" while Chrome throws an error "this site is not reachable, connection timed out" for most relationships other than Facebook, Google, Youtube and a few other sites on my Macbook Pro. Sometimes, however, I am able to get the site on Google and access one page other than the home page and everything on the site works fine afterwards. I use a Macbook Pro OS X El Capitan (10.11.5) running. Can anyone help?

  Test in safe mode, if it works back to the normal mode safe mode start-up to test again.

  Try safe mode if your Mac does not end commissioning - Apple Support

  Let us know if the problem occurs in mode without failure or even once after start in normal mode.

• Network troubleshooting is he diagnosed "your computer is correctly configured, but the device dns server is not responding...". How can I fix it

  I get a lot offline on my laptop. After that I ran the network troubleshooting is diagnosed "your computer is set up correctly, but the device dns server does not respond.  How can I fix this problem please?

  Hello

  1. what operating system is installed on your computer?

  2. are you using wired or Wi - Fi?

  3. you will remember to do recent changes on the computer before this problem?

  I suggest you

  Method 1:

  Empty the Cache DNS (Domain Name System) follow the steps below:

  a. click the Start button.

  (b) in the search box, type command prompt.

  c. in the list of results, right-click command prompt, and then click Run as administrator.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  d. at the command prompt, type ipconfig/flushdns.

  Method 2:

  If the previous step fails, follow these steps and check if the problem persists:

  a. click "Start", enter "NCPA. CPL"(without the quotes) and press ENTER.

  b. right-click on the connection you use for the local connection, and then click "Properties".

  c. Click to select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.

  d. in the Internet Protocol window, we will change the "Preferred DNS server" to 208.67.222.222

  e. click 'OK' twice to complete the change.

  f. If the problem persists, please repeat the steps and change the "Preferred DNS server" to 208.67.220.220.

  Method 3:

  If the previous step fails, follow the steps described in the following link:

  http://support.Microsoft.com/kb/928152

  For more information, check the following links:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Windows SP1 - "the server has not responded.

  Hello!

  I perform a clean installation on the machine of my old mother. In fact, service of the only operation I can install is Windows XP Pro. I downloaded the sp1aexpress_usa.exe file to automatically perform the update.

  After a few checks performed by the program, he prepared to download the Service Pack 1 files. A few seconds/minutes later, the following error message appears: "the server has not responded.

  I spent nearly 3 hours to dig the web to see if I can download SP1 from somewhere within Microsoft, without a bit of luck. Is it possible to upgrade correctly from this machine to SP1 - SP2 - SP3 and thus now or should I format the computer once more and try an operating system open source?

  Thanks for your time

  Pablo

  SP1 (SP1a) is totally useless. All you need to do is to install SP2 and SP3. For more details:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_install/recovery-CDs-and-XP-Home/3256a8db-F1C1-40f5-A6AC-82f4c3c4266a

• While trying to install SP1a for Windows XP, the error is the following: server has not responded (Windows XP SP1a).

  Hello

  Recently, I reformatted and reinstalled windows XP on my old laptop. Looking to obtain service packs for it, I read that you need to start with SP1a... I did some research autour and many people are having the same problem, but nobody responded to the real problem. According to Microsoft, I install SP1a to install any other. The error is as follows: the server did not respond. If the server has been taken down or refuses connections. My internet connection remained active all attempts to access the server.
  Unless the information is wrong on the website, installation of SP3 won't fix it. All responses I've seen to this problem have been installing something you can't until you install first.
  Here is the link, in that it tries to connect:
  Connection to
  http://xpSP1.Microsoft.com/ISAPI/pstream3.dll/XP/SP1.USA.1106a.
  Here's the exact error:
  "The following error occurred during the installation of the Service Pack 1a attempted to download the files from the Service Pack 1 from the internet:
  The server did not respond. »
  Thank you.

  You should be able to download the Service Packs as a standalone installer at the following addresses:

  SP1a: <> http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=19751 >
  SP2 <> http://www.microsoft.com/download/en/details.aspx?id=28 >
  SP3 <> http://www.microsoft.com/download/en/details.aspx?id=24 >

  If you can not download to your computer, then use another machine to download the installation file and move it to your computer.

  You don't need to install SP1A.  XP Gold, you must install SP1A or SP2 before installing SP3.  I recommend that you start with SP2 and then SP3.

  "How to obtain the latest Service Packs for Windows XP"
    <>http://support.Microsoft.com/kb/322389 >

  HTH,
  JW

• XP5.1 SP1a download "the server has not responded.

  I had to reinstall XP 5.1 and I try to install SP1a.  On the attempt to download - I get the message "the server has not responded.  I have an internet connection - I asked the download from the MS. download site  For some reason machines updates do not work and I need to install SP1a to get to SP3. Location that is not responding is 'HTTP:xpSP1.micrsoft.com/isapi/pstream3.dll/xp/SP1.USA.1106a '.

  THX

  I had to reinstall XP 5.1 and I try to install SP1a.  On the attempt to download - I get the message "the server has not responded.  I have an internet connection - I asked the download from the MS. download site  For some reason machines updates do not work and I need to install SP1a to get to SP3. Location that is not responding is 'HTTP:xpSP1.micrsoft.com/isapi/pstream3.dll/xp/SP1.USA.1106a '.

  THX

  Were you recently doing a Clean Install? I ask because you are implying in your installation of Windows XP is in 'gold' or SP0 (i.e., pre - SP1) level. Well sure, automatic updates will not work!
  You can use this path to level – says in passing:
  Gold XP to XP SP2 to XP SP3.
  Note that installing SP1a is TOTALLY USELESS!
  Here are the detailed instructions:

  1. download the installation of SP2, SP3 and IE8 files. I prefer to keep these on a USB key, but this is optional. Here are the links to all the installation of three files:

  http://www.Microsoft.com/download/en/details.aspx?ID=28 (for SP2)

  http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

  And if you wish, download the Setup file of a good anti-virus program. I recommend Avira free Antivirus:

  http://www.Avira.com/en/Avira-free-antivirus

  2. disconnect Internet.

  3. temporarily disable the automatic updates.

  4. install SP2. Reset.

  5 install the SP3. Reset.

  6 switch to IE8. Restart TWICE.

  7 install an Antivirus software.

  (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

  8 make sure that firewall Windows is activated (it should be).

  (Now you can physically reconnect to the Internet.)

  9 visit Windows Update to download and install only the critical security updates.

  10 re - enable automatic updates.

  After the back if you need guidance.

• My PC does not connect to the Internet, a window opens and says DNS server does not respond.

  Original title: programs network networking Internet site Internet Site Web Web Site URL of the network

  My PC does not connect to the internet, a window opens and says DNS server does not respond.

  Hello

  Follow the steps in the article mentioned below and check if it solves the problem:
  http://support.Microsoft.com/kb/314095

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Server did not respond error when you try to install Service Pack 1 for Windows XP.

  I had to do a restore system with xp home edition. Trying to update from sp1 which has been downloaded to the thumb drive and sent to my office at the top of the page. starts to load, and then tells me that the server did not respond. I am connected

  You do not start with a service pack earlier and go to the top. You only download the latest service pack. The latest service pack for Windows XP Home Edition is Service Pack 3.

  Go to Windows Update and see if you can find it there.

  If this isn't the case, then you can manually download it here:

  http://www.Microsoft.com/download/en/details.aspx?ID=25129

  It is a CD image file that requires you to burn to a CD or use a virtual CD/DVD software like Virtual CloneDrive. This allows you to open the ISO file as if it was a real CD inserted into your DVD drive. All you have to do is double-click the ISO file, once you have installed this program. Run the configuration file.

  http://www.SlySoft.com/en/Virtual-CloneDrive.html

• Get "DDE server window not responding do not" message when computer shutdown

  Tell me why when shut down my PC , I got a "DDE SERVER WINDOW NOT RESPONDING... END message NOW? ' I've never had before, and the only way I could stop my PC was to finish the task.
  I am running Windows XP SP3
  Thank you!

  I uninstalled a program called iLike Sidebar & it seems that the DDE server window does not come up during a re-start and or close. I think it was the cause of it occurring first, because now that I remember I never had it happen before you install the Sidebar iLke. I think it was the cause of the problem, and am keeping an eye on, just in case it happens again. I hope I'm right about my prognosis.

  I thank all those who responded to this question, I had, & if he come again I will adhere to all the suggestions that everyone else does.

  Thank you!!

• The DNS server is not responding.

  Just bought this WRT160N a few days ago, I implemented and no problems now, randomly, I can't the internet to work, every once in awhile, he will work for a few minutes, then it will return new.  When I troubleshoot Windows, I have "the DNS server is not responding" * detected * this computer is located on a wired connection to my router, and is currently the only computer connected to my router.  The connection works fine when I run the cable directly from my modem to the computer (which im doing now) any help would be greatly appreciated!

  To upgrade the firmware of your router, you don't need to be connected to Internet... Just connect the Modem to the computer and download the firmware on your router... Once you have downloaded the firmware on your router... Connect the Modem to the router on the Internet Port and connect the computer to the router Linksys on Port n ° 1... Follow the instructions I mentioned in my previous post, how to upgrade the firmware on your router... Once the firmware is upgraded successfully... Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  If your Internet Service is cable follow this link

  If your Internet Service is DSL follow this link

• I can access the internet but can no longer send or receive mail. I get a message that the POP 3 Server has not responded.

  I can access the internet but can no longer send or receive mail. I get a message that the POP 3 Server has not responded. Nor do the SMPT server. 0x800CCC19 error number is given in both cases. I have no help when I type the error number in the help Windows Mail. How can I solve this problem?

  original title: can't send or receive emails.

  Tools > accounts > select your account > properties > Server tab, ensure that 'Connect with password' is not enabled.

  Or you might want to try the new port settings.
  http://www22.Verizon.com/residentialhelp/highspeed/email/setup+and+use/questionsone/124289.htm

• Unable to connect to the internet, the dns server is not responding

  Hello

  It is the second system I've seen in the last two weeks with this question, I reloaded the OS on the first.  The system is Windows Vista Ultimate x 64.

  That is the problem.  Open Internet Explorer 9 on a Windows 7 PC, you get the message:

  Internet Explorer cannot display this webpage

  Click on diagnose connection problems, you get the following:

  The DNS server is not responding

  Look at a detailed information your told to contact your network administrator (this is me - no other XP or Windows 7 PC on the network has a connection problem).

  Below that is the message:

  Your computer is trying to use a DNS server that is incorrect or does not exist.

  Note that this is a laptop that has started on another network with the same problem.  I took it to my office to solve problems.  My DNS server is a WIndows SBS 2003 server.

  Below that is a log file of etl you cannot open (Notepad considers undesirable, much of the use that is).

  The steps I did to try to resolve the problem.

  Virus system scan

  There is no hosts file, I've recreated which.

  The static value IP and DNS.

  I can ping the DNS server by its IP address, but not by name.

  I put the DNS address to 208.67.222.222

  Restored network drivers

  Reininstalled all network drivers

  Disable Microsoft Virtual WiFi adapter

  Any suggestions would be helpful.

  the

  Hello

  Have you made changes on the computer before this problem?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Try to reset the DNS cache by using the following steps and check it, if it helps.

  a. Click Start, type cmd.exe in the start search box, right-click on CMD.exe and run as administrator.

  (b) in the command window, type the following and then press ENTER: ipconfig/flushdns

  c. you will see the following confirmation:

  Windows IP configuration

  With success, emptied the Cache of DNS resolution.

  Method 2:

  Try the following steps to release and renew the IP address and check if it helps.

  a. Click Start, type cmd.exe in the start search box, right-click on CMD.exe and run as administrator.

  (b) in the command window, type the following and then press ENTER:
  - enough ipconfig at the command prompt and of the press ENTER
  - ipconfig / renew in the command prompt and press ENTER

  c. check if the problem is resolved.

  Hope the information is useful.

• I get this message - your computer seems to be configured correctly, but the device or resource (DNS server) is not responding)

  Hello

  My computer is stuggling to access internet, I get this message - your computer seems to be configured correctly, but the device or resource (DNS server) is not responding).  All the other computers in my house are connected without difficulty.  Any suggestions?

  Thank you

  I solved the problem.  When my router lost power, somehow the addresses changed if the IP address of the Dell Wireless computer is no longer fell in the pool of addresses maintained by the router.  When I've reconfigured by router and had released and renewed my IP on the Dell computer, everything started working again.

  Thanks for your help!

• Cannot access the Wi - Fi connection with the error: "DNS server is not responding" on Windows 7

  So, recently, I installed a new router. After restarting my modem as indicated in after connecting the router to the modem, I was surprised to see that the wireless network has been renamed to (name) 2. I continued with the installation and soon found that it happened too much to the network from the router, and none of them does not seem to work. They tell me that the DNS server is not responding. for the last ive tried day every last problem I can be downloaded on the internet and nothing seems to work. pls help

  Original title: renamed networks and will not work

  Check if your modem has a built-in router.  If so, it should be disabled until your router works.  If this is a new router, contact the manufacturer of the router.  They will help you.

  It is not likely a problem on your computer.