ESXi 6.0 U1 host high CPU (climbing slowly) but VM idle

Similar Questions

• Use high CPU (35% average) while System Idle process CPU about 98% but frustrated by "[name of the prog] has stopped working".

  Hello

  I am trying to help someone with a laptop HP model g6-1202sa (Windows 7 Home Premium 64 - bit, another record at the end of the post).

  I think that Windows is now updated and drivers, but the problem remains also.

  The laptop has the symptoms mentioned in the title I found the Manager tasks.  Laptop fan is on a large part of the time, and the owner says that, during the execution of something more intensive than Skype for example of internet browsing, they get a warning from Norton on high CPU. Resource monitor shows that system interrupts are on average about 31% CPU.

  The results, I found the task manager has led to some research on Google, which in turn led me to want to run adksetup.exe (Windows Assessment and Deployment Kit) in the hope of discovering if a particular driver is causing the problem. (Various threads on the internet point to what is the way to go).

  However, after downloading adksetup.exe, when I try to launch it I get the initial screen of Toolbox and then 'assessment of Windows and the deployment for Windows 8.1 Kit has stopped working ". (Verification of the solution finally gives the only option to "Close the program").  Similarly, I have now discovered that if I try to look at the properties of the computer, i.e. start > right click on computer > left click on properties, I get "Windows Explorer has stopped working". Do more research on Google I find sometimes I get "Internet Explorer has stopped working" sometimes (Chrome is ok).  More out of curiosity than anything specific I ran AMD VISION Engine Control Center after right click on the desktop and ended with 'Catalyst Control Center; The host Application has stopped working".

  So before going any further, does anyone have any ideas what's happening?   I do not understand the problems 'has stopped working"in safe mode, but the high utilization of the processor with System Idle Process around 98% is still there.  It appears so that I can run adksetup.exe in safe mode while this would be the way to proceed and continue to try to tackle the problem of CPU?

  For the record, some of the things I've done along the way include update of Windows, updating drivers, running the file system (no violation of integrity) checker, a regular chkdsk ("CHKDSK discovered free space marked allocated in the master file table (MFT) bitmap. Correcting errors in the volume bitmap. Windows has made corrections to the file system").  Swapped the only module memory 4GB 2 x 1 GB modules I had to hang out, all the symptoms remained 4 GB then reinstalled.

  Thanks for the tips

  HP g6-1202sa Windows 7 Home Premium 64-bit

  4 GB of ram

  AMD A4 - 3300M APU with graphics Radeon (TM) HD 1900 MHz

  523 GB of free disk space

  WE

  Since the observer event logs, these are some of the problems

  Software connection of 1 hp mgr is damaged and needs to be installed.  There are literally hundreds (or even thousands of these errors)

  Cannot find the description for the ID of the event source hpCMSrv 5. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  The failing application name: hpConnectionManager.exe, version: 4.1.23.1, time stamp: 0x4df7dbef

  2 - the description for event ID 0 in source AdvancedSystemCareService8 is not found. Remove

  3 - Media center is corrupt (updated)

  The description for event ID 0 in source MCUpdate is not found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted.

  Workouts 4 - sky are corupt

  Session "SkyDriveSessionName" was able to start with the following error: 0xC0000022

  5 - the description for the ID of the event source BtFilter 26 is not found

  6 - hundreds of Cvhsvc.exe is a part of the virtualization Client Microsoft Microsoft Office Service... Errors

  The description for event ID 100 from source CVHSVC is not found.

  7. the description of event ID 3057 source client Application Virtualization Client cannot be found.

  As you can see there are at least a dozen of them which are probably related to the high utilization of the processor.

  The drivers are not updated (Bet you checked in the Manager device or with a sweeper driver as app)

  To be honest I don't see how SFC returned no breach of integrity account required to this type of problems.

  It might just be easier to re - install win 7, but I'm happy to help anyway

• 3.1EA1 - High CPU on Mac even when idle

  There are various threads autour on CPU, but I couldn't find one specifically for 3.1EA1 with processor high when the program is idle.
  
  Right now I am running:
  
  SQL * Developer: 3.1EA1
  Appearance: MacOS X
  Operating systems: MacOS X - Snow Leopard (10.6.8)
  
  I have 5 connections to different v11.2 databases Oracle, that don't perform queries... but the processor uses 50% (25% on each of the two nuclei) and 500 MB of RAM.
  
  TEST SCENARIO
  -----------------
  If I restart SQL * quiet developer then the CPU at almost zero and 325 MB of RAM
  Even after the reconnection of the sessions the CPU remains very low, and memory increases up to 360MB
  If I run a simple query (select * from global_name ;) in each of the 5 sessions, then the CPU jumps to a constant 11-12% and 423 MB of RAM.)
  
  I hope that this simple test scenario will help you reproduce the problem, but if not, then please let me know what you need more information.

  Hello
  You have the NFL Oracle located on Mac we recommend that you use the Oracle on Mac appearance, which does not exhibit this problem.
  You can test and let us know?

  Thank you
  Barry

• Customer (ESXi host memory, CPU usage & network) report - VFoglight

  Customer report (memory host ESXi, CPU usage & network) - a single report, we would like to see the top host memory, CPU usage & network (in vertical graphic mode) & wise high use of cluster for monthly wise.

  Create a custom report for our requirement.

  * Click on the general TAB on the right pane - action-> click on create dashboard.

  * Select use all data-> next-> name of the dashboard-> next-> select the type of column-> finish.

  * Click on the data TAB, expand VMware-ESX host > & slipped, objects-> to select create Table

  * Select Show all on the shortcut menu select Properties.

  Select ESX, ESX version build:

  Expand CPU-CPU host-> consumer > select high CPU.

  Expand the memory-> memory host--> Select MemoryProcesses top of the page.

  Expand Stoarge-> storage-> process host select high IO-> next-> next-> next-> select the ESX host to add to this table of edge/report from the list of filters under-> click Finish.

  If this point of view to the table, I've found metric to the graph view.

  But when we ran the report, values showed n/a, unfortunately. For the cluster option, I can't use superior even to the table view.

  Some can help me pull vFoglight report.

  Concerning

  Virginia Reynaud

  One way to do this easier would be to create an array with the elements you want on it, as the name of the virtual machine, the use of the processor etc... and then you can filter/sort by CPU utilization, memory usage etc. and only have the Top 10 or anything else you like.

• ESXi host report CPU and memory usage

  Hi all

  I'm looking for a script that exports CPU ESX host and use of MEM in below format

  HOST use CPU % MEM %

  70 30 host1

  30 50 host2

  Concerning

  Pankaj

  Try something like this

  Get-VMHost | Sort-Object -Property Name |Select Name,State,  @{N="Status";E={$_.ExtensionData.Summary.OverallStatus}},  @{N="CPU%";E={[Math]::Round(100*$_.ExtensionData.Summary.QuickStats.OverallCpuUsage/($_.ExtensionData.Summary.Hardware.CpuMhz*$_.ExtensionData.Summary.Hardware.NumCpuCores),0)}},  @{N="Mem%";E={[Math]::Round(100*$_.ExtensionData.Summary.QuickStats.OverallMemoryUsage*1MB/$_.ExtensionData.Summary.Hardware.MemorySize,0)}}
  

• Cisco 4506 high CPU usage

  Hello

  Yesterday afternoon, one of our 4506 switch has climbed to 96% CPU usage. I did not the configuration changes. Here is the process with high CPU usage

  40 36630921841089949084 3360% 8.63% 10.56% 11,29% 0 Cat4k Mgmt HiPri

  41 30929587802851505705 1084 36,61 36,53% 36.18% 0 Cat4k Mgmt LoPri

  76 72485492 270422107 268 entry IP 7.91% 7.72% 7,68% 0

  113 35661224 40030007 890 21.91 28.13 29,84% 0 DHCPD receive

  After having HS health platform, what are those high:

  S2w-JobEventSchedule 10.00 7.54 10 8 100 500 9 9 7 36703:06

  Stub-JobEventSchedul 10.00 12.23 10 48 100 500 12 12 9 51004:51

  K2CpuMan review 30,00 29,44 30 99 100 500 33 32 25 37067:58

  K2AccelPacketMan: Tx 10.00 12,15 20 1 100 500 12 12 10 11871:22

  And finally sh platform cpu packet statistics gives me this

  Packets dropped in hardware by CPU Subport (txQueueNotAvail)

  UC Subport TxQueue 0 TxQueue 1 TxQueue 2 TxQueue 3

  ------------ --------------- --------------- --------------- ---------------

  0 11045 14031 149981 188579662

  1               0               0               0         5919279

  2               0          115638               0               0

  RkiosSysPacketMan:

  Falures allowance package: 0

  Package (common software) buffer allocation falures: 0

  Package Buffer (software ESMP) allocation falures: 0

  Package Buffer (software EOBC) allocation falures: 0

  Falures IOS Packet Wrapper buffer allocation: 0

  Packets dropped in the overall treatment

  Total 5 s 1 min, 5 min 1 hour avg avg avg avg

  -------------------- --------- --------- --------- ----------

  146521131 0 0 0 0

  Packets dropped in treatment by event CPU

  AVG s Total 5 1 min, 5 min avg avg avg 1 hour event

  ----------------- -------------------- --------- --------- --------- ----------

  Input Acl 146002289 0 0 0 0

  SA Miss                             27         0         0         0          0

  Packets dropped in the treatment of priority

  AVG s Total 5 priority 1 min, 5 min avg avg avg 1 hour

  ----------------- -------------------- --------- --------- --------- ----------

  Normal 46723179 0 0 0 0

  Medium 518884 0 0 0 0

  High 99797883 0 0 0 0

  Packets dropped in the treatment of the reason

  AVG s Total 5 reason 1 min, 5 min avg avg avg 1 hour

  ------------------ -------------------- --------- --------- --------- ----------

  SrcAddrTableFilt 24 0 0 0 0

  L2DstDrop                             7         0         0         0          0

  L2DstDropInAcl 46 0 0 0 0

  NoDstPorts                           32         0         0         0          0

  NoFloodPorts 146521022 0 0 0 0

  The package 16 total queues

  Packets received from the packet queue

  Total 5 s 1 min, 5 min 1 hour avg avg avg avg queue

  ---------------------- --------------- --------- --------- --------- ----------

  6279742115 238 247 203 193 ESMP

  L2/L3Control 1320811357 57 48 43 41

  Host of learning 24933459 1 0 0 0

  L3 Fwd Medium 5813 0 0 0 0

  L3 Fwd Low 72923122 0 0 0 0

  L2 Fwd high 11130 0 0 0 0

  L2 Fwd Medium 164016 0 0 0 0

  L2 Fwd 242645408 227 237 193 185 Low

  L3 Rx High                           9         0         0         0          0

  L3 Rx 89296999 439 461 378 364 Low

  Failure of the RPF 129420 0 0 0 0

  Packets dropped packet queue

  Total 5 s 1 min, 5 min 1 hour avg avg avg avg queue

  ---------------------- --------------- --------- --------- --------- ----------

  L2/L3Control 18470371 0 0 0 0

  Host of learning 5825831 0 0 0 0

  L2 Fwd Low 405210 0 0 0 0

  L3 Rx Low                         9863         0         0         0          0

  I will be restarting the night switch to see if it helps.

  Thank you.

  Salman

  Hello Salman,

  If DHCP requests are taken over by clients, you will probably want to focus on the limiting of requests DHCP using DHCP snooping.

  ip dhcp snooping limit rate rate

  http://www.Cisco.com/c/en/us/support/docs/switches/catalyst-4000-series-switches/65591-Cat4500-high-CPU.html#high_cpu

  http://www.Cisco.com/c/en/us/TD/docs/switches/LAN/catalyst4500/12-2/25ew/configuration/guide/conf/DHCP.html#wp1073418

  -Ginette

• ESXi 5.0.0 VM crashes - cpu 0?

  Hello

  I administer a machine running esxi 5.0.0 with a sbs 2011 VMS.

  Today that VM does more - this has always worked but very very slowly

  on the resources tab, the cpu indicator is and remains 0 Mhz.

  The host has nothing else to do.

  I have a good candidate as the cause.

  Within the virtual machine (sbs, 2011), yesterday I installed an e-mail archiver application.

  On a previous physical server and with an earlier version, this software sometimes caused high cpu loads.

  The archiver should be originally, why suddenly high cpu load would esxi cut of cpu resources?

  The sbs2011 has a minimum cpu reserved for him

  I restarted the VM, stopped the archiver tool and am now crossing my fingers the virtual machine does not freeze again.

  Question:

  (1) what happened?

  (2) can I force esxi free virtual machine cpu?

  --------------------------------------

  The same type of gel that's happened once or twice after the initial installation of esxi, now a few months ago.

  But once I put a cpu/memory reserve, it has not reoccured.

  --------------------------------------

  syslog is not available, only after the reboot I put syslog (beginner and all that )

  After 8 months and many failed attempts, I finally found the reason

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2000382

  conclusion: do not drive cd on the host machine.

• VMotion error: host vmware cpu is not compatible with the requirements of the judgment of the VM to CPUID level register 0 x 1 'ecx '.

  Problem: I can't move my Exchange vmserver2 a vmserver1 server.

  Error: "host vmware cpu is not compatible with the requirements of the judgment of the VM to CPUID level register 0 x 1"ecx"

  
  Details:

  Vmware KB:

  * Ensure that the hosts have the same features enabled in the BIOS of the servers. If there is an incompatibility between the servers BIOS configuration even if they are physically identical, they always show a compatibility error message. The two most common to check features are the No-Execute memory Protection (NX / XD) and virtualization technology (VT / AMD - V).

  A ran the CPU utility Vmware as referenced by

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1003718

  
  "CPU that have similar features. "This means that the need of processors from the same manufacturer (AMD or Intel), be of the same family (Pentium, Xeon, etc.), and have common features extended between ESX servers involved in the VMotion.

  My results:

  vmserver1 Dell Inc.    PowerEdge 2950 2 Intel Xeon E5405 of CPU @ 2.00GHz
  vmserver2 Dell Inc.    PowerEdge 2950 2 Intel Xeon L5410 of CPU @ 2.33 GHz

  They both share exactly the same characteristics:
  FT support
  Enable VT
  VT Capable
  NX/XD
  FFXSR
  RDTSCP
  SSE
  SSE2
  SSE3

  Support Relaxations:
  NX/XD
  RDTSCP

  Relaxations unsupported:
  All THE features of the SSE
  FFXSR
  CMPXCHG18B

  In the 'Show Windows debug' it reads 'of the compatible CPU"

  This virtual Exchange machine works since Esxi version 3.5.  I am testing now vCenter Server 5.0 with version 5.0.1 on the Esxi server.

  Note: I've also been meeting random uses CPU high, leading from Windows Server 2008 to lock up completely.  I have found no trace of problems within the Windows host and Vcenter is not questions.  I have "reset" of the virtual machine in order to get the server back online.  The CPU to the top lock is random and the server can run for days with no problems. * Don't know if it's related...

  Virtual host config Exchange computer:
  Guest operating system: MS Windows Server 2008 64 bit
  version 8 of virtual machine
  CPU: 4vCPU
  Memory: 10240MB
  Overload memory: 420,61 MB
  vSphere HA Protection: protected
  Host CPU consumed: the 209 MHz

  Maps: vmserver1 watch "CPU is not compatible" CPU: 0% (none of the virtual machine running)
  Consumed host memory: 9823,00 MB
  Active memory of Fords: 409,00 MB

  Views of storage: I have a warning symbol on the QNAP iSCSI disk that hosts the virtual Exchange computer but I see no record... I'm new here...

  I understand that vmotion apply restrictions on the movement of VM compatibility to avoid it.  The components of the HA does not apply to these requirements.  We tested yesterday HA, succsessfully and this how we came to be stuck with the Exchange vm on vmserver2 and it cannot migrate to vmserver1.

  I appreciate your time and consideration,
  Tim

  It seems that you have two different processor speeds. Try the VCA mode and also check the BIOS version you and make sure they match.

• problem with high CPU usage audiodg.exe

  While playing the game, I get a message saying that I raised the CPU usage 99% of the base. This is caused by "audiodg.exe. I tried a few bugs that I found online. I was told that they would not work with my computer. I have a Dell XPS15 second-generation i5. Has anyone experience this problem?

  Hello

  1. what you did to solve the problem?

  audiodg.exe [Windows Audio Device Graph Isolation] file hosts the audio engine for Vista and Window s 7.

  All DSP [Digital Signal Processing] and audio processing is done within this file. Suppliers are able to install their own audio effects and DSP in the audio pipeline, which is then processed by audiodg.exe

  In order to correct the high CPU usage, disable audio enhancements addressed by the file audiodg.exe. To disable the audio improvements, follow these steps:
  a. right click on the speaker in the lower corner icon right.

  b. Select the playback device from the menu. A list of devices should appear on the screen.

  c. double-click the device that has a green check mark. The properties for the device windows should open.

  d. click the improvements at the top.

  e. in the list of improvements, uncheck all the, or check Disable all improvements.

  f. click on the OK button to save your changes and close the window.

  g. click OK to close the devices window of reading.

  I would also say that you use resource monitor to monitor the CPU usage.

  Resource monitor is a tool that allows you to analyze the use of the CPU, disk, network, and memory in real time.

  You can use the performance tab in the Manager of tasks to see how the CPU of your computer is used by Windows and other programs running on your computer.

  Reference:

  See use of CPU utilization and other performance information

  http://Windows.Microsoft.com/en-us/Windows7/view-CPU-utilization-and-other-performance-information

• High CPU usage after upgrading to ESX 4 Update 1

  I just upgraded 2 hosts (IBM HS21 blades) 4 ESX to ESX 4 Update 1, and now I experience high CPU usage.  Before use on each host would turn around 10%, but now after the upgrade, it's about 80 percent on each and now all the virtual machines are running very slow as a result.

  The only change that has been done is that I demoted local readers of hard drives of 500 GB SAS drives to 7 200 RPM 73 GB SAS drives mirrored, 10 000 rpm mirrored and performed a clean installation of ESX 4U1 on each host.  As the VMs 14 are located on a SAN disk array I thought only, it would improve the performance of the hosts.

  Has anyone else had a similar problem or a potential solution?

  See you soon,.

  Josh.

  Seems very strange.

  You have the same number of VM? You have to upgrade the VMware tools?

  There are other changes?

  Local disk is not so important to the overall performance.

  André

• High CPU, RAM HIGH Server 2.0

  Hi all

  I have VMWARE server installed 2.0 on windows server 2003, this machine has 32 gigabytes of RAM with 2 processors to dual-core (3.2 ghz) xeon.  I have 4 virtual machines will each activity 4 gigs of RAM a piece (assigned amount).  The machines are servers to test for our developers and get barely affected.  My problem is that when I reboot a virutal machine for like 15 minutes the machine freezes and I can't do anything with this guest operating system.  It is very annoying espically when you test something and need to reboot constantly.   I have serached through the forums, but since "high CPU" and "high memory" is if common is very difficult to sort through all this.

  Hello

  In my view, that a disk file is preserved to shadow ram invited.  I think remember me a post for some time there is a parameter that can be changed to stop this, but it can reduce the reliability as a result of an accident.

  Try to reduce the amount of ram on your comments and see if the boot process is faster.  You are starting the prompt or wake of a bet into hibernation?  If it's a State of hibernation, it touches the hard drive because the memory is reloaded, if several guests start at the same time it can have a signoficant impact.  He also the effects of the weather in the judgment of the host, so all guests are on hinernate to clodedown.

• High CPU consumption (always between 12 and 30%)

  I am running Firefox 9.0.1 for Mac. Until the upgrade to version 9.0.1 I had no use of high CPU problems... I've now must constantly between 12% and 30% of CPU and up to sometimes use much further than that, which really slows down my Mac to a point where I have to kill Firefox to use other applications.

  I have a new Mac mini with fast CPU and 8 GB of RAM.

  I tried to reinstall and also to disable the 4 Add-ons I have installed. After a new installation and all 4 disabled add-ons, I see exactly the same problem even with one tab open to google.com

  Any help from the community is very much appreciated.

  Thanks in advance...

  I've upgraded to Firefox 10 and this issue is now resolved.

• High CPU after 10.11.3 at 10.11.4 upgrade

  Use El Capitan successfully for several months, 10.11.1 to 10.11.3 migration. However, the upgrade to 10.11.4 led to relatively stable high CPU.

  In particular, I see process launchd (about 75%), UserEventAgent (70%) and mds_stores (30%) CPU consumption at that rate there essentially all the time, the % overall slowed down when do nothig is about 45% - therefore on an end of 2014 retina iMac 27 inches with Fusion drive. Despite this, everything works still with reasonable performance, probably because there is still spare CPU capacity.

  Looking at the Console log, I see a lot of

  29/03/2016 18:17:01.002 com.apple.CDScheduler [49]: * LOG MESSAGE QUOTA EXCEEDED - SOME MESSAGES OF THIS PROCESS HAVE BEEN LAID *.

  29/03/2016 18:18:02.001 com.apple.CDScheduler [49]: * LOG MESSAGE QUOTA EXCEEDED - SOME MESSAGES OF THIS PROCESS HAVE BEEN LAID *.

  29/03/2016 18:19:03.002 com.apple.CDScheduler [49]: * LOG MESSAGE QUOTA EXCEEDED - SOME MESSAGES OF THIS PROCESS HAVE BEEN LAID *.

  29/03/2016 18:20:04.002 com.apple.CDScheduler [49]: * LOG MESSAGE QUOTA EXCEEDED - SOME MESSAGES OF THIS PROCESS HAVE BEEN LAID *.

  It's be connected at intervals of a minute or so, although I don't see any referenced messages.

  Removed some of the programs began and eliminated some of the agents launched (I think) and also re-installed from the recovery partition, but the problem is still there.

  Someone at - it watched questions along these lines?

  Would appreciate any suggestions.

  Try each of them in order. A test to see if the computer works properly:

  1. Reset the PRAM
  2. Reset the controller (SMC) system management
  3. Start the computer in Safe Mode, and then restart normally. It's slower than a standard home.
  4. Repair the disk by booting to the recovery HD immediately after the chime press keys control and R that the Utility Menu appears. Choose disk utility and click on the button continue. Select the withdrawal (usually Macintosh HD) volume entry of the list to one side.  Click first aid button in the toolbar. Hold the button brings up. Disk utility and return in the Utility Menu. Restart the computer from the Apple Menu.
  5. Reinstall OS X by booting from the Recovery HD using the command and R keys. When the Utility Menu appears, select reinstall OS X and then click continue.
  6. Download and install updated Combo OS X El Capitan 10.11.4.

• Satellite P300-212 - system causes the periodic high CPU load

  Windows Vista Edition Home Premium (OEM) on the Toshiba Satellite P300-212

  Even on a system Windows freshly installed (from recovery DVDs), the system process (PID 4, NT Kernel & System) causes on a regular basis (every five minutes) a CPU load high for a few seconds, during which the system hangs, not even the mouse pointer can be moved.
  Sysinternals Process Explorer identifies the thread of high load as "ntkrnlpa.exe! ExfTryAcquirePushLockShared + 0 x 15 2 "with the thread ID 20 or 24.

  Does anyone have an explanation for this behavior or a solution to the problem?

  Hey,.

  If you have installed Windows recovery disk Toshiba but still high CPU usage? Hmm that's strange because this image is tested by Toshiba

  Have you installed or uninstalled any software or tools?
  I uninstall the current antivirus and disable some start up programs you n t need in msconfig. Usually, this should work.

• Tecra M2 - stop hard on high CPU (turns off with no BSOD)

  Experienced stops consistent when the CPU is running at full during a little while.
  -J' mean 'stops' complete power cut with no blue screen of death where all is lost and the computer must be restarted manually.
  -by "high CPU", I mean when the processor locks to full use such that when you insert a column in a big Excel sheet with errors or if you want a large number of files and you open a video from the network or when you run a registry scan and antivirus analysis at the same time.

  The problem took place regularly for a few months and I can now make a case with greater predictability. Using the hardware monitor suite 'Everest', it seems that the problem occurs when the temperature of the CPU is located at 99 for more than a minute or more.

  This happens with some, but never when batteries run - then attempts to force the error, it will not be stopped if the power cable is released just before the drop point.

  In the cases of the problem, it seems to be a small error message appearing only a fraction of a second before the death of the computer.

  Each reference forum and help that I read would suggest the problem is related material and that the chip or the motherboard is overheating and need replacement. While the laptop is almost 18 months old, I bought a new ' everything except the screen and HDD "earlier this year, and was not prepared to accept the explanation without more tests.

  Kantonix Linux works very well and the CD starts seems to tax the processor as much as the same events that kill for me under XP.

  A few weeks back, I installed Windows XP on a second HARD drive in the Bay of hotswappable and noted the installation seems to work pretty hot computer and he died during the process. It has experienced no difficulties for while but, a few days after moving the HARD drive reinstalled in the primary position and after you have reinstalled a lot a lot of applications, the error started happening again.

  Last night I caught a few fractions of a second before the death, the pulling power and stop the process and allow me to see the error message (as mentioned above):

  -first message came from "TOSHIBA Power Saver" saying "a fatal error occurred at x 06" (not sure about the last bit) ".

  -second message was "THotkey.exe' saying 'could not load powrprof.dll.

  -monitoring of several hundred cases of the second message.

  Because of the error messages, I was not able to get a print screen.

  Solutions or even on ideas that would be very appreciated!

  Post edited by: DC-financial

  Hello

  According to your explanations and the information in your ad, I think that the problem is related to the software.
  You wrote something about energy saving. This Toshiba utility controls the speed of the CPU and the use of cooling modules.
  I think that this request could be responsible by the judgments. Try reinstalling this utility.
  In addition, check the configuration of the unique power plans. If you work only with battery energy saver using another mode of power supply as working on AC.
  I think you could check these consumption patterns and configure it.

  Verification of the cooling module is also not a bad idea. Maybe fans cannot work properly because of the dust and debris inside the books.
  I use the vacuum cleaner to clean the fans. CA? s an easy way to make it free of dust.
  But if you get it, you must be careful.