3.1EA1 - High CPU on Mac even when idle

Similar Questions

• LR uses 10% cpu even when idle

  I noticed that LR 3.3 consumes 10% cpu all the time, even when he's sitting in the background (and I work in another application and I haven't started any lot)?

  After LR in the foreground (as active application), it consumes less than 5%?

  What he does?

  Is there some settings for switch/reduce background tasks?

  (I already turned off detection for import and automatic backup XMP memorycard)

  IIRC, someone reported similar behavior lately, which has proved to be a plugin problem. Try disabling all plugins in the plugin Manager.

  Gossweiler beat

  Switzerland

• Use high CPU (35% average) while System Idle process CPU about 98% but frustrated by "[name of the prog] has stopped working".

  Hello

  I am trying to help someone with a laptop HP model g6-1202sa (Windows 7 Home Premium 64 - bit, another record at the end of the post).

  I think that Windows is now updated and drivers, but the problem remains also.

  The laptop has the symptoms mentioned in the title I found the Manager tasks.  Laptop fan is on a large part of the time, and the owner says that, during the execution of something more intensive than Skype for example of internet browsing, they get a warning from Norton on high CPU. Resource monitor shows that system interrupts are on average about 31% CPU.

  The results, I found the task manager has led to some research on Google, which in turn led me to want to run adksetup.exe (Windows Assessment and Deployment Kit) in the hope of discovering if a particular driver is causing the problem. (Various threads on the internet point to what is the way to go).

  However, after downloading adksetup.exe, when I try to launch it I get the initial screen of Toolbox and then 'assessment of Windows and the deployment for Windows 8.1 Kit has stopped working ". (Verification of the solution finally gives the only option to "Close the program").  Similarly, I have now discovered that if I try to look at the properties of the computer, i.e. start > right click on computer > left click on properties, I get "Windows Explorer has stopped working". Do more research on Google I find sometimes I get "Internet Explorer has stopped working" sometimes (Chrome is ok).  More out of curiosity than anything specific I ran AMD VISION Engine Control Center after right click on the desktop and ended with 'Catalyst Control Center; The host Application has stopped working".

  So before going any further, does anyone have any ideas what's happening?   I do not understand the problems 'has stopped working"in safe mode, but the high utilization of the processor with System Idle Process around 98% is still there.  It appears so that I can run adksetup.exe in safe mode while this would be the way to proceed and continue to try to tackle the problem of CPU?

  For the record, some of the things I've done along the way include update of Windows, updating drivers, running the file system (no violation of integrity) checker, a regular chkdsk ("CHKDSK discovered free space marked allocated in the master file table (MFT) bitmap. Correcting errors in the volume bitmap. Windows has made corrections to the file system").  Swapped the only module memory 4GB 2 x 1 GB modules I had to hang out, all the symptoms remained 4 GB then reinstalled.

  Thanks for the tips

  HP g6-1202sa Windows 7 Home Premium 64-bit

  4 GB of ram

  AMD A4 - 3300M APU with graphics Radeon (TM) HD 1900 MHz

  523 GB of free disk space

  WE

  Since the observer event logs, these are some of the problems

  Software connection of 1 hp mgr is damaged and needs to be installed.  There are literally hundreds (or even thousands of these errors)

  Cannot find the description for the ID of the event source hpCMSrv 5. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  The failing application name: hpConnectionManager.exe, version: 4.1.23.1, time stamp: 0x4df7dbef

  2 - the description for event ID 0 in source AdvancedSystemCareService8 is not found. Remove

  3 - Media center is corrupt (updated)

  The description for event ID 0 in source MCUpdate is not found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted.

  Workouts 4 - sky are corupt

  Session "SkyDriveSessionName" was able to start with the following error: 0xC0000022

  5 - the description for the ID of the event source BtFilter 26 is not found

  6 - hundreds of Cvhsvc.exe is a part of the virtualization Client Microsoft Microsoft Office Service... Errors

  The description for event ID 100 from source CVHSVC is not found.

  7. the description of event ID 3057 source client Application Virtualization Client cannot be found.

  As you can see there are at least a dozen of them which are probably related to the high utilization of the processor.

  The drivers are not updated (Bet you checked in the Manager device or with a sweeper driver as app)

  To be honest I don't see how SFC returned no breach of integrity account required to this type of problems.

  It might just be easier to re - install win 7, but I'm happy to help anyway

• Qosmio F50 - 10Z - fan cycling on and outside, even when idle

  My f50 is constantly the fan turns and turns off every couple of minutes, even when the computer is idle and does not run applications.

  SpeedFan shows that the GPU is constantly cycling between 55 and 65 degrees C even if there are no applications running (for example just after the start)-the fan kicks in at age 65, died at 55, and then slowly warms up again. The noise of the fan is noticeable (I don't think it's going full speed, however), and it is a bit abrupt and boring happen constantly and is not normal behavior. Core 1 and 2 on Speedfan are cycles between 40 and 45 C

  Outside temperature is 20 degrees, so the environment is unlikely to be a factor. I blasted air fan for dust (as much as you can because the f50 is not built to be taken by a user to the home page), but even when the fan runs at the output seems visibly warm.

  I am only drivers of toshiba running on the site (currently 7.15.11.7590)

  My main concern is that this will negatively affect the life of the fan. Am I being too picky or is there something else I could do?

  Thanks for the tips

  Hello!

  It's not easy to say what's the reason of this problem, I so a few questions:
  Did you install the laptop with the recovery disk or Microsoft?
  What operating system do you use?

  First of all, you should try to update the BIOS. You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Also, make sure that there is enough free space a tower the specifications that the air circulation is not blocked.

  I hope I could help a bit.

  Good bye

• Constantly higher than 50% even when idle CPU usage. NT kernel & system?

  Hi, I wonder if anyone can help? I built my own computer and after I installed Windows 7 and only the drivers for the respective hardware, my CPU usage is consistently above 50% and jumped off from top down to anywhere between 50 to 100%?

  I have a motherboard Biostar GF82000E with an AMD Athlon II Quad processor and also a Nvidia 9400 GT graphics card. For which I have all drivers up to date.

  I tried to install Windows 7 completely fresh with nothing installed, I ran Task Manager, immediately, and you can see from the picture what I mean...

  http://www.craigfews.co.UK/images/Untitled5.jpg

  Many thanks in advance,

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• High CPU load on Oracle when executing select on TT

  Hello. I have grid cache: 2 instances of global TT + Oracle with async dynamic writing group of cache on a single table with 1 million entries. Each instance of grid cache is located on its own host. I start the execution performance test only on instances of TT SELECT queries. Now, I see that the process Oracle starts consuming a lot of time CPU. According to the documentation (if I understand correctly) all db readings are performed between instances of TT. That fact Oracle when I run select TT? In case that we to scale horizontally by adding instances TT Oracle doesn't become a bottleneck?

  A few points:

  1 data movement between grid mnodes requires that we update some informaiton in oracle (via the replication agent). Thi is probably what is causimng load you see you on Oracle.

  2. a load of work that creates a lot of data movement will not run and will not well. This isn't a good way to use the grid of the cache. You should 'soft partition' workload
  so that the connections on a member of the grid work preferentially on a (mostly) disjoint subset of data compoared connctions to members of grid President.

  3. If you plan to work intensively with grid you hould reallly use the latest major version (11.2.2) not old enough now 11.2.1. There has been many improvements,
  bug fixes etc since 11.2.1.8.0.

  Chris

• Satellite A500 - 14 c: fan RPM changing even when idle

  I noticed that my fan is almost always above the silent mode.
  Even to just look at Web sites, send emails... the fan continues to go from top to bottom... and usually stay in rpm higher for a while.

  Air coming through the vents isn't hot, so I wonder if it's a problem of overheating or any drivers/BIOS problem.
  Anyone?

  Hello

  The fan doesn't always work with maximum performance because is not necessary if the temperature does not increase to a higher level.
  The module cooling fan works sometimes more fast and sometimes slower and it always depends on the temperature level.

  If the module of cooling turns faster then that would mean that the internal temperature has increased. The fan would remain at this level, if the temperature would not go down.
  But if the temperature drops then the fan might turn a little but slower and the laptop would be quieter.

  This is common behavior of laptop and nothing unusual and not the problem

• ESXi 6.0 U1 host high CPU (climbing slowly) but VM idle

  I have ESXi 6.0 Update 1 (Build 3029758) installed on new equipment (Atom C2750, 16 GB of RAM).

  VM is Solaris 11.0 with 1 vCPU and 4 GB of RAM.  Solaris was installed from floor-11-1111-text - x 86 .iso without any additional configuration except to install VMware Tools.

  After you start the VM the CPU host shows inactive (12 MHz), but he's slowly climbing 10% per day (240 MHz per day) until she reaches about 95%, while the virtual machine itself becomes unresponsive, however said ESXi virtual machine still works fine.  At each stage the VM reports always that it is inactive.  Restart the virtual machine makes the host CPU to idle (12 MHz) and the slow rise begins again.

  Uptime of the virtual machine:

  root@nas:~ # uptime
   02:22am  up 1 day  2:28,  1 user,  load average: 0.00, 0.00, 0.00
  

  The esxtop display:

   3:22:44pm up 1 day  2:58, 496 worlds, 1 VMs, 1 vCPUs; CPU load average: 0.02, 0.02, 0.02
  PCPU USED(%): 1.9 5.4 3.0  11 1.3 0.3 0.3 1.2 AVG: 3.1
  PCPU UTIL(%): 3.6 3.3 2.9  10 0.9 0.1 0.9 1.1 AVG: 3.0
  
        ID      GID NAME             NWLD   %USED    %RUN    %SYS   %WAIT %VMWAIT    %RDY   %IDLE  %OVRLP   %CSTP  %MLMTD  %SWPWT
     36739    27266 vmx                 1    0.03    0.02    0.01   99.99       -    0.00    0.00    0.00    0.00    0.00    0.00
     36741    27266 vmast.36740         1    0.15    0.14    0.00   99.86       -    0.01    0.00    0.00    0.00    0.00    0.00
     36742    27266 vmx-vthread-5       1    0.00    0.00    0.00  100.00       -    0.00    0.00    0.00    0.00    0.00    0.00
     36743    27266 vmx-vthread-6:n     1    0.00    0.00    0.00  100.00       -    0.00    0.00    0.00    0.00    0.00    0.00
     36744    27266 vmx-vthread-7:n     1    0.00    0.00    0.00  100.00       -    0.00    0.00    0.00    0.00    0.00    0.00
     36745    27266 vmx-vthread-8:n     1    0.00    0.00    0.00  100.00       -    0.00    0.00    0.00    0.00    0.00    0.00
     36746    27266 vmx-mks:nas         1    0.02    0.02    0.00   99.99       -    0.00    0.00    0.00    0.00    0.00    0.00
     36747    27266 vmx-svga:nas        1    0.00    0.00    0.00  100.00       -    0.00    0.00    0.00    0.00    0.00    0.00
     36748    27266 vmx-vcpu-0:nas      1   11.80   11.61    0.00   88.38    0.00    0.02   88.46    0.00    0.00    0.00    0.00
  

  In case anyone is wondering, I use Solaris 11.0 because we want to use ZFS with physical RDM to create a NAS for this virtual machine.  Unfortunately, Solaris 11.1 (and above) + physical RDM = purple ESXi screen (see Bug report: 11.1 Solaris + RDM = screen ESXi 5.1 violet).  Apparently, this problem was supposed to be fixed in ESXi 5.5 but still there in ESXi 6.0U1.  I tested (physical RDM + ESXi 6.0U1 + 11.1 Solaris) and (ESXi 6.0U1 11.3 Solaris + physical RDM).  The two combinations result in purple screen.

  It is interesting however, Solaris 11.1 (and above) without physical RDMs does NOT suffer from the slow rise of above host CPU utilization.  So, either I cope with a rise in CPU host weird or purple screens :-(

  In case anyone has the same problem, I solved this superuser.com class.

  http://superuser.com/questions/1024292/ESXi-6-0-U1-Solaris-11-0-VM-host-CPU-high-slowly-climbing-but-VM-idle

  In summary, the root cause was a storm of interruption in my Solaris 11.0 VM due to an incompatibility between ESXi and Solaris 11.0 interrupt timing mode.  Add the following line to/etc/System on the Solaris VM solved the problem.

  Set pcplusmp:apic_timer_preferred_mode = 0x0

• MJB: FF 3.6.6 falls down repeatedly, even when idle

  [My apologies, I clicked on the incorrect URL and close the previous thread by mistake.]

  I have FF 3.6.6 to random crashing when I am still doing nothing. I have two websites open normally, none of them use Flash or Adobe plug-ins. A self-actualization of content every few minutes, but it's the text and graphics of JPG/GIF base (managed by JavaScript I presume). The other site does nothing if I don't take no actions. But several times a day, FF just stops silently.

  I'm running on linux Mint 9 KDE edition.

  Subject: accidents indicates the URL is not valid. ~/. Mozilla/Firefox/crash reports / there is no; ~/. Mozilla/Firefox / contains a single file called. profiles.ini - nor could I find a folder with this name in one of the directories related to FireFox.

  One of your modules could be the culprit too. Try running Firefox in questions to troubleshoot Firefox in Safe Mode with all disabled add-ons. If that solves the problem, see Troubleshooting extensions and themes and problems of hardware acceleration to resolve common Firefox problems and possibly troubleshoot issues with plugins like Flash or Java to solve common Firefox problems

• DAQmx read results 2 ms/s in high CPU usage

  I have an application that reads the 32 channels of 2 ms/s analog input signals, at the same time. The actual hardware will be: SMU-8135 Win7, chassis SMU-1071, 2 x SMU-6368 (16 channels). The SMU-two 6368 will provide 32 channels data acquisition.

  I don't have the material at the moment, but I've been estimate the processor on the alternative configurations needs, because I have concerns about the use of the CPU to data acquisition high speed. Two alternative configurations are:

  (1) SMU-8133 (quad core) WinXP, SMU-1062 q, PXI-6133.

  (2) PXI-8106 (dual-core) WinXP, PXI-6133, PXI-1042.

  Note: PXI-6133 supports high speed HAVE 2 ms/s, at the same time.

  I wrote a simple continuous data acquisition software to allow me to compare the CPU usage. The sample rate and the number of channels are configurable. What I found is:

  (1) at low sampling frequency, for example 100 kech. / s, the CPU usage is minimal on both configurations (bicoeur or image), regardless of the number of channels is 1 or 8. The reading of the CPU was about 1-4%

  (2) at high sampling frequency, for example 2 ms/s, what is the number of channels used, either 1 or 8, the CPU utilization was 50% for dual core and 25% for the quad core, IE. a full core has been fully utilized.

  (3) the passage of the low use of the processor (<5%) to="" high="" cpu="" usage="" (="">45%) increases when the sampling rate is rather steep and shows interesting channel-dependence (note the following has been achieved with a PXI-8106 controller, dual-core).

  • @1 channel, it happened between 950 to 970 k
  • @2 channels, it happened between 470 to 480 k
  • @4 channels, it happened between 230 to 240 k,.
  • @8 channels, it happened between 120 to 130 k.

  This model reminds me of buffer length related question but I double checked a sufficient length of the buffer was used. He suggested also, surprising a few traffic jams occurred when the amount of data increases up to certain level.

  My question is, is this a problem with this particular card (PXI-6133) or driver DAQmx (9.5.5f4). How the problem is when I'm doing an acquisition of 32 channels?

  For your information, I have attached the benchmarking software.

  Thank you!

  Donghui Yin

  I followed this example code (see link below) and used based on events DAQmx, now the excessive CPU utilization problem has been resolved. Playback from the CPU is now less than 10 percent, while it could be 50% (in the case of dual-core) or 25% (case of hearts) at the same sample rate and number of channels.

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/5911

• Satellite L850 - error of cooling and slow down the speed of the CPU even when fan to 80 c

  So, I have this problem that my fan stops turning when the system is under load and then turns on, starts running at the speed of 100%, an error which says error with cooling system, laptop computer back to the service.

  The fan slows even when the laptop cools completely, it only returns to normal speeds once I closed the laptop.

  In the last few days, which has stopped completely. Now the fan won't even middle speeds even though the CPU temperature is 80 C. Due to the bad news of cooling time score about 70 ° C, even at idle.

  The laptop is almost a year. I already had this problem after a week of buying it, and they replaced my processor. I have windows 7 x 64, amd 7670 m and 2350 m i3.

  I wonder if this may be a BIOS problem or I have to take for the service? How can I stop this from happening? And Yes, my power plan is on high performance.

  AFAIK the cooling fan is controlled automatically if you don t have a any influence on it. Temperature sensors are placed on the motherboard and they control the cooling fan activity. That one possibility to change fan cooling activity is to change the option in the option of cooling method (advanced power settings > Toshiba saving settings).

  In my opinion the best solution for you is to contact the nearest Toshiba service provider and ask for help.
  They have diagnostic tools that you can check all this.

• My macpro is backup in the capsule of time even when I was at work, which means that the time capsule is consumed my data plan. Can anyone suggest a way I can have it the backup only when my mac pro and time capsule is in the same local wifi

  my mac pro is backup in the capsule of time even when I was at work, which means that the time capsule is consumed my data plan. Can anyone suggest a way I can have it the backup only when my mac pro and time capsule is in the same local wifi

  If the Time Capsule and MacBook Pros are not on the same network, the MacBook is not backup in the time Capsule. You probably see what snapshots leaving MacBook on the local disk, until the two are reconnected. If you don't want that to happen, disable Time Machine on a different network.

  Good day.

• My iPhone (and Mac) has recently started inviting me to enter my password of e-mail occasionally, even when my password has not changed.

  My iPhone (and Mac) has recently started inviting me to enter my password of e-mail occasionally, even when my password has not changed. I always receive my email if I do not reintroduce.  I sometimes take the message pop up on the home screen.  It happens about once a week lately.  I'm a little worried that so often on my iPhone.  The same thing happens to my Mac too, but less frequently.  I noticed that this happens for Gmail, email from work (Exchange) and iCloud, but not all other accounts.  Potential virus?

  Not necessarily

  When the mail (especially sent) is rejected by the server - for some reason - server busy or too large attachment or even unstable connection - the first step is to ask for authentication

  I would see if there is a model in terms of contacts or attachments that you can discern

• I can't see my iPHone on my mac pro when using Airdrop book, even though Airdrop is on both devices. Any suggestions?

  I can't see my iPHone on my mac pro when using Airdrop book, even though Airdrop is on both devices. Any suggestions?

  I assume that the Air Drop is enabled in the iPhone and that your devices are regarded as Favorites?

• Manager tasks shows my CPU 100% usage but when I go to the process tab only a handful of programs with a percentage higher than 0 if displayed and none of those who are more than 3%

  Original title: Task Manager

  Manager tasks shows my CPU 100% usage but when I go to the processes tab and sort by CPU usage there are only a handful of programs with a percentage higher than 0 if displayed and none of those who are more than 3%.  What else is using my system resources that is not displayed by the Task Manager?

  Click Show processes from all users . There may be other systemic processes and processes that run under other accounts.

  Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]