Similar Questions

• the command "hp printer assistant" in the software officejet 7500 is not running.

  When I try to run the Officejet 7500 software, the "HP printer Assistant" command does not run when I click or double-click it.  The other 3 commands run normally. This has happened the first or second time I tried to use the software to check ink levels.  I tried ninstalling and reinstall the software without success.

  The system is Pavilion g6-1A30US laptop, Windows 7 Home Premium.

  Hello

  Uninstall the software by clicking Start > programs > HP > HP Officejet 7500 > Uninstall.

  Download and install the latest version of the software below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-109374-2&cc=us&DLC=en&LC=en&OS=4062&product=4083652&sw_lang=

  I think you should see options like scanning and fax options now.

  Shlomi

• ISO Windows7 upgrade of my system XP... Please help the person not tech savy!

  I have 2 computers... one is a new laptop w / software advanced... the other is a hp tower that works under xp.  I searched for a trail version or a download of windows 7 or 8 if possible, but downloads only I've found require you to burn the files to a disk that I don't have the possibility to do so.  A 60 day trial version will do, but I can't locate a!  The Tower system is my husband, and he is absent until mid-May.  I need to make it until then... any advice/suggestions?  I would feel much safer if I need xp at least until mid-May.  I'm all thumbs when it comes to nothing technical.  Please, keep this in mind w / your answers!

  Unfortunately there is no trial version. If you want Windows 7 or 8, I'm afraid, you have to buy the operating system with a key Code. We can guide you in building a USB bootable for installing, but it is actually more difficult to burn a DVD to an .iso. I would also be sure that the material will actually in charge of Windows 7. Mania it on the end of XP support, it's just that... oversold. It is not something to be ignored, but if keep you a good antivirus, you should be OK for awhile (like 6 months to a year). XP actually has been precarious for some time now even with updates if you are at no more risk that you've visited for the last year or two and nothing terrible has happened, right?

• HP Simple Pass: Does not allow widows connect you

  I just bought the HP ENVY 17. The simple HP goes I put my fingerprints and the web attempt to connect you but nothing has worked. I tried logon windos, but it doesn't work anymore. The Palm with the fingers are not displayed and now afer disable all the options I tried to activate the logon windows again, but he said tha the password is wrong a TI is not. In addition to this in the biometric devices section, it says that I don't have a finger print reader.

  How do I trouble the HP simple pass or restart?

  Hi KN26,

  Yes, go ahead and uninstall it first.

  Thank you

• Have to keep laptop computer restart as simple pass will not let me connect to internet sites

  Half the time I try to sign into my favorite sites with log-ins that I type in my information, close go, tap NO to do simple pass I want to add to the list and then nothing happens. If I press the sign in again then simplepass opens again and nothing happens until what I restart my laptop then its usully OK again.

  Can I safely just uninstall simplepass without creating problems to come as if I didn't use it anyway.

  HP Pavilion 17 laptop

  Product F7R63EA #ABU number

  Concerning

  stuland

  Hello

  You can uninstall HP SimplePass as usual since entering programs and features - when the uninstallation is completed, restart the laptop.

  If you ever want to reinstall this software, you can download the installer from your pilot books page here.

  Kind regards

  DP - K

• DELL INSPIRON N4010 WEBCAM QUESTIONS: PLEASE HELP... DELL CUSTOMER... AND ANYONE WHO HAS KNOWLEDGE REGARDING MY PROBLEMS...

  I have a Dell Inspiron N4010. Configuration: 1st generation i5 processor with windows 7 home basic 64-bit.

  3 months after the purchase of my laptop, I have updated my Dell webcam central through the applications update service... Shortly after the update, my integrated webcam has started to show problems.

  DESCRIPTION OF THE PROBLEM:

  Shortly after the update of my installed factory Dell webcam central, my integrated webcam has begun to show the problem. webcam was able to start with any application such as Skype or dell central webcam himself. Instead, webcam LED flashes for flicker of a second, and then goes away without any streaming video.  Trying to open it, an error message is displayed: "your webcam can be used by another application. Close the application to launch streaming video".» Initially, the problem was temporary, that is occasionally the webcam began video streaming without any problem, but as the time passed, webcam stopped working almost completely.

  TRIED SOLUTIONS:

  I tried all the solutions mentioned below:

  • I uninstalled the Dell webcam software and reinstalled with the version installed in the factory, supplied on CD with laptop. Uninstalled the webcam via the Device Manager and reinstalled, but without success.
  • I heard that there is a conflict between the Dell face recognition software and dell webcam central. So, I uninstalled the dell face recognition software. After that, the webcam worked for a few days, and there still rebooted problem.
  • I went through various forums online, dell community, customer service, etc. and everything suggested tried but without success. I heard several times that this is not a hardware fault but driver error. Even in a few forums, its says that Creative Technology Limited have not been able to supply webcam drivers compatible with windows 7 64-bit.
  • I even did factory restore my laptop twice, but could not do my webcam works.
  • Then, I decided to format my system and installed windows7 again with the disc that came with my laptop. During this process, I have kept the recovery drive and the untouched OEM disk untouched. I have reinstalled all the drivers in such order as advised by Dell. Despite puts everything in order, I couldn't do my built-in webcam work. More... now I can't even access the Dell factory restore option despite the fact that my recovery disk is intact and it is to have all the files into it!
  • I tried the utility dell online Diagnostics. He could not detect any error webcam!
  • Few days back, I used the dell startup screen diagnostic utility and scanned the built-in webcam to find errors, and my webcam failed in all tests! Here are the screenshots of the tests:

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  I GUESS I GAVE ENOUGH INFORMATION THAT CAN HELP TO DIAGNOSE THE PROBLEM WITH MY DELL INTEGRATED WEBCAM... I ASKED DELL CUSTOMER SERVICE TO HELP ME SOLVE MY PROBLEM OF WEBCAM... AND ALSO THE FACTORY RESTORE INACCESSIBILITY PROBLEM... PLEASE HELP ME...

  AFTER AN ENTIRE WEEK OF UNINSTALLING - REINSTALLING VARIOUS DRIVERS & SOFTWARE FOUND IN THESE FORUMS, SUGGESTIONS INCLUDING REINSTALLING WINDOWS FROM DELL DATA SECURE BACKUP.  THIS IS WHAT I LEARNED.

  My problem was. No supported webcam not connected when I ran dell webcam central. No program could access the webcam. Device Manager showed SPECIFIC DEVICE. Camera suddenly stopped working! I had a little more hair when this problem started.

  I have Inspiron N4010 windows 7 Home premium. Are the drivers for the webcam in windows 7, there is no separate drivers available anywhere. with the exception of some XPS models.

  A post in these forums suggests to abolish the plastic around the display bezel. It's simple. Just carefully go around and remove. It is clipped without screws on my system. This gives access to the webcam hardware. I got dell webcam central on-board. (showing no supported webcam connected!). Gently, I tried to disconnect the connector of the webcam. My intention was to disconnect and reconnect. I barely touched and the fire came and windows immediately started to install device drivers. A beep and an icon in the notification bar popped up. A few minutes, I saw my beautiful mug on the screen to my absolute delight.

  Guys, if you have a problem where Device Manager does not recognize your webcam for most probably, this is a hardware problem. The small rectangular plate on which is mounted the webcam is not properly secured by DEll. It is a DESIGN PROBLEM. The Board is located in place on two small round plastic holders without any screws. It can move easily. The bezel plastic when it is installed itself that holds it in place, but not very effective. When you open and close the lid of the screen, especially if you are taking in the middle where the camera you finally loose connector. That's why some messages will tell you what they camera has stopped working suddenly and then started working by himself all of a sudden. When I put the bezel plastic, it snaps into place, I was able to move the camera, and it stopped working again. A little gentle jiggle got running again and its been since.

  It does not matter what version of central webcam you have in windows 7. It runs on windows Vista service pack 2 compatibility mode. (Find WEBCAMDELL2. EXE file under programs x 86-dellwebcam-dellwebcam Central-dell webcam central. Right-click on the file name. Select Properties. Select the Compatibility tab and run this program in compatibility select windows vista service pack 2).

  If in your case even though there might be a software problem. always try this simple 2 minute solution b4 safe spending frustrating days find the drivers and software. Hope this post helps someone. May work on other systems too! Good luck! and thank you to the guy who led me down this path and misery!

• Windows 8 - ISO need download link please help.

  Hi I need the ISO of windows 8 to create a bootable disc and also the ISO for windows 8.1.

  Is someone able to help me with one of those download links?

  Sincerely & direct them best.

  Kristoffer Gehl Carlson

  Moved Windows 7 installation, set at level and activate Forum.

  The following article will show you how to get it:

  http://techingiteasy.WordPress.com/2013/02/14/how-to-obtain-64-bit-Installer-and-create-install-media-for-Windows-8/

  You will need to do this from a computer running Windows 7.

  You can also use the respective assistants to upgrade for Windows 8 and Windows 8.1

  Windows 8:

  http://go.Microsoft.com/fwlink/p/?LinkId=321548

  Windows 8.1:

  http://go.Microsoft.com/fwlink/p/?LinkId=261871

• Nightmare of Customer Service - the billing department - someone please help?

  I've been a customer of creative cloud for years. I recently acquired a new credit card and cancelled the card that was used for my automatic monthly payments to Adobe. I logged into my Adobe account and updated my payment information. When my date of payment, the payment does not pass. I said, 'maybe I made a mistake and typed a wrong number", so I logged in to my Adobe account and updated the information of payment again. This did not help. My horrible experience with customer service began this day - April 20, 2015. The nightmare continued for more than a month and I spent COUNTLESS hours on the phone and chat with customer support. I contacted my Bank, USAA, double - twice they told them me the only reason why to come through Adobe charges denied is that the address that adobe has for me the file (my old address) does not match the address associated with my new credit card (my new address). I have to update address with my new payment information, but apparently do not have access to update the address what adobe has for my account.

  I was told that my address has been updated countless times, but the automatic payments continue to be denied to my Bank and my Bank reports the same problem - the address sent by Adobe at the request of the accusation is incorrect and does not correspond to my current address.

  When Adobe Support sends the generated mails automatically titled "Adobe case Update" and providing a link to a "Customer Support Portal", my OLD ADDRESS is obviously at the top with my name. My OLD ADDRESS, even though I was assured and reassured many times my address has been updated in the system. The only thing I can think is that address only is not updated on all platforms, especially in the Department of billing and payments.

  I'm just trying to pay my monthly bill of the Adobe Creative Cloud. How can something as simple as to update my address on my account have taken more than 8 hours of my time over the last 5 weeks?

  Someone please help!

  
  

  Thank you, Maggie
  

  Hi Maggie-

  I sent you a private message. Please check up on this post, if you read email (link: Customer Service nightmare - Department billing - someone please help?), by clicking on the icon of your photo at the top of the screen and check your Inbox.

  Kind regards

  Guinot

• ISO vSphere does not start

  Hello

  I try to install vsphere on a new system with a card mother Gigabyte GA-X58A and I don't get too far at this point...  The situation is that when I try to boot from the DVD that contains the standard iso esxi, nothing happens.  I have a fast blink, no screen change, nada.  I am able to start a Win7 disc from the same machine and I am also able to load the iso (disk mounted) esxi in a VM and windows startup.  So I confirmed the iso esxi is functional and the system with the Gigabyte card starts a dvd but I am at a loss of what be it further.  I'm a noob to virtualization (if it isn't already obvious enough ) and I would appreciate any input from more experienced.

  Thank you

  Lefty29er

  You will need to find a piece of software to burn the image on CD/DVD. Copy of the ISO file will not work. Check with the software that you did the DVD with to see if there is an option to "burn Image". If this is not the case, there are a lot of freeware tools that you can download. A google search for ISO image to burn is expected to increase much.

• Not able to connect to the host ESX 3.5 by VC so customer VI

  The host ESX 3.5 has been disconnected from the VC, and we are not able to connect customer using VI as well. The virtual machines on the host are running without any problem.

  Got the message when tried to restart/start services of Mgmt. below

  # Service mgmt-vmware restart

  stopping VMware ESX Server management services:

  VMware ESX Server Host Agent Watchdog

  VMware ESX Server host agent

  Starting VMware ESX Server management services:

  Agent Host VMware ESX Server (background)

  Availability report startup (background)/etc/init.d/mgmt-vmware: fork: Resource temporarily unavailable.)

  # Start of Service mgmt-vmware

  From the VMware ESX Server management services:

  VMware ESX servre Agent Host (background)

  Availability report startup (background)

  status of service mgmt-vmware #.

  VMware-pass is stopped

  hostd.log - entries

  /etc/init.d/sshd command failed

  Didn't the /etc/init.d/sshd fork: Resource temporarily unavailable.

  Let us know the fix for this problem other than restarting the host.

  To know how to clean it, please read KB1007887 - defunct cimservera of process on VMware ESX 3.5 hardware management agents run and follow the instructions.

  André

• Pass does not work

  Do not know why but last Pass does not. I installed it and it shows on the Add-ons Manager. I have disabled and abled several times and it will not work. What should I do?

  Worked LastPass you previously in Firefox 33, or is this a new installation of LastPass?

  If you don't get a useful answer here, try LastPass forums: https://forums.lastpass.com/viewforum.php?f=5

• Single-pass does not work for Web sites after the last update of firefox

  Single-pass does not work for Web sites after the last update of firefox. This works in IE and Chrome and it works under windows (when starting the computer), but not with any website in Firefox.

  Firefox 30 spent some less commonly used "Always turned on" plugins "asking to activate. To check and change this to SimplePass, you can use the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Then on the right, check the control on the right side of the SimplePass.

  You may need to exit Firefox and start it again before it takes effect.

  A little luck?

• I have a laptop hp envy dv7 - 3723cl, the simple pass does not work

  My simple pass does not work. I have check the biometric device, the software is up-to-date, and it gives me an error code 19.

  On my installed programs I do not see the simple pass program is no longer.  How can I get the correct software to reinstall?

  Help, please

  Hi @GStefanakis ,

  Welcome to the HP Forums!

  It's a great place to find answers and information!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I was unable to locate specific information about a desire dv7 - 3723 cl.

  How can I find my model number or product number?

  Here is a link on technet.microsoft.com that can help.   Code 19: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged

  You can try a system restore to a date well known.  Using Microsoft System Restore (Windows 8)

  If the above did not help, I uninstall and reinstall the software Simplepass.  Using the Recovery Manager to restore the software and drivers (Windows 8)

  I hope this helps!

  

• I want to run a vi that has a switch that passes between when run in vi It gives meeesage the highest level VI stopped for the unknown

  I want to run a vi that has a switch that passes between when run in vi It gives meeesage the highest level VI stopped for the unknown

  What should do?

  bisso92,

  You must be more specific...  When you say that you want the cover to be visible when it is called, I suspect you mean sub - vi.  You can go to the menu:

  File > properties VI then select the appearance of the window, followed to customize and select "display panel when called.  You can also select close thereafter, while initially closed.

  There are other "tricks", such as the incorporation of secondary school within your main VI, in this way, you can see both.

  Normally, a hand VI (or main function in other languages), would still present so that the operator can perform other operations.  If so you should look at using a Structure of the event with a producer / arrangement of consumer, where the consumer in a loop has the case structure where the sub-vis.

  To learn more about LabVIEW, I suggest that you try to watch some of these tutorials.

• My t.mobile javascript passed can not get my hotmail no more why?

  My t.mobile javascript passed can not get my hotmail no more why? never had this before am I blocked. How to make it back

  See questions of T-Mobile T-Mobile support.