ESXi host does not have the full connection due to an incorrect user name or password.

Similar Questions

• The VRM Agent errors in vCAC 6.1 - cannot complete the connection due to an incorrect user name or password.

  Receive errors of VRM subject officer in vCAC 6.1 on a random/intermittent basis.

  I read the other posts documenting similar errors but in almost all of these positions, these errors arose following a request by commissioning has failed, a misconfigured in vCO vCenter Server Plugin interface or some other connection failure distinguishable. In my case, this condition is intermittent (at least it seems to be) and resolves in the end. I have no problem of supply of virtual machines on one of my endpoints configured in vCAC and, as far as I can tell, the network appears to be stable.

  At this stage since there seems to be no significant or negative impact for the health of the entire system, (for aesthetic reasons only), I usually end up the purge of these error messages in the SQL DB Table. I wonder if anyone else has this problem or clues as to what may be the cause of this?

  Here are some of the typical error log file.

  [05/06/2015 11:54:01] [Debug]: this exception has been taken:

  System.Web.Services.Protocols.SoapException: Unable to complete the connection due to an incorrect user name or password.

  at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse (SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)

  at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke (String methodName, Object [] parameters)

  at VMware.vSphere.VimService.Login (ManagedObjectReference, String userName, String password, String locale _C)

  at DynamicOps.Vrm.Agent.vSphere.VSphereSession.Connect (String username, String password)

  at DynamicOps.Vrm.Agent.vSphere.VSphereHypervisorServiceProvider.GetVcenterInstanceUuid (ManagementEndpoint managementEndpoint)

  at DynamicOps.Vrm.Agent.vSphere.VSphereAgentService.GetHypervisorData)

  at DynamicOps.Vrm.Agent.Core.VRMCoreAgent.SendPingReport)

  at DynamicOps.Vrm.Agent.Core.CoreAgentBase.SendPingReportLoop (Object sender, ElapsedEventArgs e)

  [05/06/2015 11:54:01] [Error]: <? XML version = "1.0" encoding = "utf-16"? >

  < Boolean > false < / Boolean >

  This exception has been taken:

  System.Web.Services.Protocols.SoapException: Unable to complete the connection due to an incorrect user name or password.

  at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse (SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)

  at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke (String methodName, Object [] parameters)

  at VMware.vSphere.VimService.Login (ManagedObjectReference, String userName, String password, String locale _C)

  at DynamicOps.Vrm.Agent.vSphere.VSphereSession.Connect (String username, String password)

  at DynamicOps.Vrm.Agent.vSphere.VSphereHypervisorServiceProvider.GetVcenterInstanceUuid (ManagementEndpoint managementEndpoint)

  at DynamicOps.Vrm.Agent.vSphere.VSphereAgentService.GetHypervisorData)

  at DynamicOps.Vrm.Agent.Core.VRMCoreAgent.SendPingReport)

  at DynamicOps.Vrm.Agent.Core.CoreAgentBase.SendPingReportLoop (Object sender, ElapsedEventArgs e)

  Ron thx.

  Indeed, it turns out that our network has been unstable with intermittent packet loss and the routing of the shortcomings... The main culprit seems to have been Channeling of Virtual Port (VPC) behaves poorly or badly configured on a physical switch uplink... VPC, in our case, was created to supplement our vSphere Teaming and failover policy settings.

• Re: Internet browser does not have the full content of the page

  Hello

  Have a Satellite L300 laptop. Problems with opening the pages of website. I use Vista.
  When I try to open Internet pages pages explore does not bring to the high content full screen is full of information, but the content is not.
  Say yes they is 20 items on a web page, it displays 10. tried my ISP and they told me to reset the Explorer but has not fixed they deliver siad it is something to do with the computer.

  Then a hlp with that?
  It would be great if you could.

  A BIG thank you in advance.

  To be honest I don't understand what the problem is here.
  Can you send us the screenshot?
  Is IE zoomed maybe?

• Cannot complete the connection due to a bad user name or password

  Hello. I have a strange problem. I am beginner with VMware products. I installed ESXi on HP proliant 180 gen9 6.0.

  After that, I used converter stand alone to migrate the linux server. Still was very good, everything works. But the next problem emerges after that two or three time - when I try to connect to remote ESXi it telling me "cannot close connection due to a bad username or password." No matter how I connect via Vsphere Client, SSH, or simply click on the link "Browse data in the host inventory warehouses" in the browser. In addition. I can connect with the same login\password using usb keyboard connected to the server.   Password change has no effect. It allows only a reset to default. And then it starts to pitch up and anywhere.  I read somewhere that the problem occurs if the set dns and host name on ESXi, I put not DNS so that only the host name. Another problem not defined RAID controller, but I don't think it is interconnected, maybe I'm wrong? I'd appreciate any ideas and help.

  
  

  Hello. Ty for answer. Problem solved. I started to use same keyboard as ESXi server option. After the default US in US int problem has resolved. I don't know why it works with default US for a few days before.

• Host does not have the information

  Hello
  
  I installed 11g Agent newly. Agent works very well.
  Access the page host, most of the information is appear as unavailable.
  
  How to get the data listed in the console?
  
  -Thank you

  Hello

  Please, perform the following steps:
  Run "Refresh Host Configuration" for this host +
  ---> Deployment---> refresh host configuration select the problematic host and click on "refresh the Hosts.
  + Then run following command ".". "/ emctl upload agent.
  + Connect to new grid control and check the status.

  Best regards
  Vincent

• Unable to connect to my profile at the start, the SCREENS ' SAYS the PROFILE SERVICE does NOT have the USER logon

  "Unable to connect to my profile when starting, SCREENS SAYS'THE PROFILE SERVICE does NOT have the USER logon"

  Profile of user could not be added

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• WIN 7 does not have the net driver for Asus A2D WHAT CAN I DO. I HAVE THE CONNECTION TO THE LOCAL NETWORK.

  WIN 7 does not have the net driver for Asus A2D. or I'm unable to find it.
  WHAT I CAN DO. I HAVE THE CONNECTION TO THE LOCAL NETWORK.
  Thanks for any idea, address etc.
  DragMil
  You can wito to * address email is removed from the privacy *.

  Try an older driver installed in compatibility mode

  To run in compatibility mode do the following:

  Click with the right button on the installer > properties > compatibility > choose OS

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows?SignedIn=1

• How to print a selection of an image in photoshop CC, I have problems because in the print window does not display the full image and the printed only a section of what I SELECTED

  How to print a selection of an image in photoshop CC, I have problems because in the print window does not display the full image and the printed only a section of what I SELECTED

  Hi jodepepevalentin,

  In the print menu, check "scale to fit media" under the Position and size of the device and then check out.

  If you want the area selected for printing, check "Print selected area" under the Position and size and specify the size.

  Kind regards

  Claes

• My computer says "drive does not have the ability to access this service" when I am trying to connect and to convert a JPEG to PDF.

  My computer says "drive does not have the ability to access this service" when I am trying to connect and to convert a JPEG to PDF. That's the only reason I pay for access to Adobe Reader...

  Why used it allow me to do this? I have done several times before.

  Hi tinas,.

  Looks like you may be using an earlier version of the player, which now is no longer able to access the services Cloud of Document PDF. Please visit: Error Message: "Drive doesn't have the ability to access this service."

  You can download the most recent version, CD player, of https://get.adobe.com/reader.

  Best,

  Sara

• "Your host does not support the current settings for comments.

  My requirement of virtualization are demanding very high resolution on a Win2000, ESXi host guest.  I upgraded, using the stand-alone version of converts, but I can no longer switch to full-screen (the scale).  I get the following message:

  -

  ---

  Error

  -

  ---

  Connection error: your host does not support the current settings of comments in mode full-screen.  Try to reduce the color depth or resolution of your guest and try again.

  Impossible to enter full screen mode.

  Do you want to retry?

  -

  ---

  Yes No

  -

  ---

  Does perform a work around?

  Thank you

  Alan

  The vSphere client is a terrible Viewer. Very slow. W2K is also a limitation. Take a look at the other viewers if RDP is not suitable. Radmin is one I've used several years ago.

• exp.exe System/pass@xe_345 does not have the name of the service as input

  Please suggest,
  
  
  can be used below command name service
  exp.exe System/pass@xe_345 does not have the name of the service as input
  
  What is the problem with the command below
  

  C:\oraclexe>exp.exe system/pass@XE file=hr.dmp log=hr.log consistent=y owner=hr
  
  Export: Release 10.2.0.1.0 - Production on Wed May 12 16:16:28 2010
  
  Copyright (c) 1982, 2005, Oracle.  All rights reserved.
  
  
  EXP-00056: ORACLE error 12541 encountered
  ORA-12541: TNS:no listener
  EXP-00000: Export terminated unsuccessfully
  
  C:\oraclexe>exp.exe system/pass file=hr.dmp log=hr.log consistent=y owner=hr
  
  Export: Release 10.2.0.1.0 - Production on Wed May 12 16:16:56 2010
  
  Copyright (c) 1982, 2005, Oracle.  All rights reserved.
  
  
  Connected to: Oracle Database 10g Express Edition Release 10.2.0.1.0 - Productio
  n
  Export done in AL32UTF8 character set and AL16UTF16 NCHAR character set
  
  About to export specified users ...
  . exporting pre-schema procedural objects and actions
  . exporting foreign function library names for user HR
  . exporting PUBLIC type synonyms
  . exporting private type synonyms
  . exporting object type definitions for user HR
  About to export HR's objects ...
  . exporting database links
  . exporting sequence numbers
  . exporting cluster definitions
  . about to export HR's tables via Conventional Path ...
  . . exporting table                      COUNTRIES         25 rows exported
  . . exporting table                    DEPARTMENTS         27 rows exported
  . . exporting table                      EMPLOYEES        107 rows exported
  . . exporting table                           JOBS         19 rows exported
  . . exporting table                    JOB_HISTORY         10 rows exported
  . . exporting table                      LOCATIONS         23 rows exported
  . . exporting table                        REGIONS          4 rows exported
  . exporting synonyms
  . exporting views
  . exporting stored procedures
  . exporting operators
  . exporting referential integrity constraints
  . exporting triggers
  . exporting indextypes
  . exporting bitmap, functional and extensible indexes
  . exporting posttables actions
  . exporting materialized views
  . exporting snapshot logs
  . exporting job queues
  . exporting refresh groups and children
  . exporting dimensions
  . exporting post-schema procedural objects and actions
  . exporting statistics
  Export terminated successfully without warnings.
  
  
  
  ^C
  C:\oraclexe>
  C:\oraclexe>
  C:\oraclexe>
  C:\oraclexe>
  C:\oraclexe>
  C:\oraclexe>exp.exe system/pass@xe_345 file=hr.dmp log=hr.log consistent=y owner
  =hr
  
  Export: Release 10.2.0.1.0 - Production on Wed May 12 16:18:27 2010
  
  Copyright (c) 1982, 2005, Oracle.  All rights reserved.
  
  
  EXP-00056: ORACLE error 12541 encountered
  ORA-12541: TNS:no listener
  EXP-00000: Export terminated unsuccessfully
  
  C:\oraclexe>lsnrctl status listener
  
  LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 12-MAY-2010 16:18
  :39
  
  Copyright (c) 1991, 2005, Oracle.  All rights reserved.
  
  Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
  STATUS of the LISTENER
  ------------------------
  Alias                     LISTENER
  Version                   TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
  ction
  Start Date                06-MAY-2010 15:32:57
  Uptime                    6 days 0 hr. 45 min. 41 sec
  Trace Level               off
  Security                  ON: Local OS Authentication
  SNMP                      OFF
  Default Service           XE
  Listener Parameter File   C:\oraclexe\app\oracle\product\10.2.0\server\network\a
  dmin\listener.ora
  Listener Log File         C:\oraclexe\app\oracle\product\10.2.0\server\network\l
  og\listener.log
  Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=suvarna)(PORT=1521)))
  Services Summary...
  Service "ORCL" has 2 instance(s).
    Instance "ORCL", status UNKNOWN, has 1 handler(s) for this service...
    Instance "orcl", status READY, has 1 handler(s) for this service...
  Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
  Service "XE" has 1 instance(s).
    Instance "XE", status UNKNOWN, has 1 handler(s) for this service...
  Service "orclXDB" has 1 instance(s).
    Instance "orcl", status READY, has 1 handler(s) for this service...
  Service "orcl_XPT" has 1 instance(s).
    Instance "orcl", status READY, has 1 handler(s) for this service...
  The command completed successfully
  
  C:\oraclexe>tnsping XE_345
  
  TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 12-MAY-2
  010 16:19:18
  
  Copyright (c) 1997, 2005, Oracle.  All rights reserved.
  
  Used parameter files:
  C:\OraHome_1\network\admin\sqlnet.ora
  
  
  Used TNSNAMES adapter to resolve the alias
  Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = suvarna)
  (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = XE)))
  OK (30 msec)
  
  C:\oraclexe>exp.exe system/pass@xe_345 file=hr.dmp log=hr.log consistent=y owner
  =hr
  
  Export: Release 10.2.0.1.0 - Production on Wed May 12 16:19:37 2010
  
  Copyright (c) 1982, 2005, Oracle.  All rights reserved.
  
  
  EXP-00056: ORACLE error 12541 encountered
  ORA-12541: TNS:no listener
  EXP-00000: Export terminated unsuccessfully
  
  C:\oraclexe>

  Seems you have the strategy (profile) password for the user of the SYSTEM, but it cannot be reason of errors like ' no. LISTENER '

  Question:

  change the unlock SYSTEM user account;

  Published by: Teymur Hajiyev 12 May 2010 16:15

  adding text "BOLD"

• Where to find a version of service pack 1 xp this need does not have an internet connection to install?

  service pack 1 xp

  Where to find a version of service pack 1 xp this need does not have an internet connection to install?

  The only version I know is the "broken" here:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=19751
  As is the case, assume that you can't get it.
  Why do you think you need? Were you running just a Clean Install? Or you are planning to do this? (And if so, why? It is VERY rarely necessary!)

• hp7410 does not keep the wireless connection

  hp7410 all-in-one does not keep the wireless connection. It requires to install a new driwer. so far, I have at least 16 versions of the driver. neither maintains the status of line long enough fo more than a few hours.

  Please provide the following information if anyone can help including:

  The printer model - done

  Detailed problem description-

  Operating system on the computer (including the revision of the service pack)-

  Method - USB, LAN, Wireless cable connection? -

  Brand and model of router and modem? -

  Error messages - on the screen of the printer or computer, no matter what flashing light patterns.

  If wireless, status of the blue wireless light on the printer, active, disabled or flashing? -

• UCR-6002: the database specified does not have the minimum requirement to load the metadata repository.

  Hi all

  I want to install a test environment with the following software products:

  WebLogic Server 10.3.6

  WebCenter Capture 11.1.1.8.0

  WebCenter Imaging 11.1.1.8.0

  BPM 11.1.1.7.0

  SOA Suite 11.1.1.7.0

  Oracle Database Enterprise Edition Release 12.1.0.2.0 12 c

  I use the remote 11.1.1.8.0 to create the database schemas.

  When RCU checks the prerequisites, it comes up with a warning as follows:

  «The database you connect to, is one newer than the supported version.» See the matrix of certification for the supported DB versions".

  If I type 'ignore' on the message box, it stops the verification process will not continue. Also, if I type "Cancel" does the same thing.

  The error message displayed in the Message box is both below:

  UCR-6002: the database specified does not have the minimum requirement to load the metadata repository.

  UCR-6080: Global check prerequisites failed - requirement of verification for the specified database

  The database that you connect is a CDB that is not supported.

  Action taken:

  1. check again on the database character set and confirmed it is set up correctly for AL32UTF8

  2. the databases are supported for WebCenter 11.1.1.8.0 + 12.1.0.1, so the database version is supported.

  Hope someone knows what's going on.

  Thanks in advance.

  Try to create a plugable (PDB) database within the CBD and then rerun

  the UCR.

  May be restricted the RCU to install MDS and other schemas FMW the

  CBD, but rather in the PDB.

  More information on PDB and CBD you can find here

  http://docs.Oracle.com/database/121/CNCPT/cdbovrvw.htm#CNCPT89235

  Hope that helps,

  Anatoli

• Adobe Illustrator CS6 My trial expired, I need the serial number to complete the installation, but my account does not have the serial number

  Adobe Illustrator CS6 My trial expired, I need the serial number to complete the installation, but my account does not have the serial number

  Find the serial number of your Adobe product quickly

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Serial number and activation support (non - CC) chat

  https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp