ESXi Installtion stuck on the root password screen

Similar Questions

• Laptop HP Pavilion 17-e119wm: STUCK ON the ADMIN PASSWORD SCREEN

  HI, I have just restored my computer.  When I turn on my HP Pavilion laptop wonder an admin password.  My admin password no longer works.  After 3 attempts I get a system disabling with a key: 71243994

  What should I do to unlock it? Any help?

  @lvt1998

  Enter 64121310

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• How to reset the root password

  I forgot the root password of my iMac that I dedicated to my children, for a long time, now, I came to use it and found it very slow and unresponsive, and I need to log in using the terminal and write unix commands to find out the real problem, but could not remember the password to root probably I created seven years ago.

  as I remember that I needed to have the CD and reboot the system with the recovery disk, but I couldn't get there, shut up always back to the default disk.

  Any help is appreciated?

  Thank you

  Hello. This information can help you http://www.macworld.co.uk/how-to/mac/what-do-if-you I-forgot-your-mac-passwor d-3594395 /

• Stuck on the Apple Logo screen

  My phone froze so I restarted. It got stuck on the apple logo screen and I tried to restore it. When I have it plugged into my laptop it would not restore because my boot drive is full. I tried to remove as much as I could turn off my laptop and emptying the trash and nothing will work. Its been sitting stuck/frozen on the logo of apple for 4 hours now. How can I fix it?

  Only way runs a restore via iTunes by putting the iPhone in recovery mode

• HP Pavilion 21-h010la stuck in the HP splash screen.

  Hello. I'm having a problem with my computer. When I try to turn it on, it gets stuck in the HP loading screen. I used the PC Hardware Diagnostics UEFI and he says that it meets the test, even if the SMART hard disk check returns a WARNING. The program didn't give me all the instructions to fix it later. Do I need to change?

  Hi there @mafi11235,

  That the Forums are with you!  It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that your computer is stuck on the HP logo at the start, and that he was a WELL-INFORMED driver error message. I'm happy to help you with this.

  If you get a SMART disk error, so it is normally a warning of impending failure, based on testing the drive runs itself. This could mean the drive is defective or shows signs of failure, but in general you want to replace it and try to make a backup of your data as much as you can, until it was inaccessible.

  You have recovery media or already made for Windows 10 recovery disc? If this isn't the case, you will want to get some for your system. Computers HP - get HP recovery disks or HP USB recovery disc

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• T420 stuck on the startup Lenovo screen

  Hi I'm new to this community, so I would like to applogise if I have something simillar to mist (I checked some but not solved my problem).

  I have a thinkpad t420, I bought a used one. It worked great, and I bought a friend, that I trust. I installed an SSD, was usnig Linux, and everything worked for a month. But then I bought a HARD drive caddy and replaced the CD-ROM. After that my thinkpad has worked for a day (although he does not recognize the second HDD). The next day, I tried to find BIOS for some parameters and after I restarted my laptop, it was stuck on the startup Lenovo screen, reboot loop. I tried:

  -removing and replacing the caddy with the CD rom.

  -replace my SSD drive,

  -replace the RAM (two locations),

  -Reset BIOS,

  -launch a diagnostic CD (but it does not start, nor can I boot from a USB key)

  My google search showed that he could bi a problem with one of the USB pins inside one of the ports (short circuit or something like that), but I couldn't find any damage. So I'm thinkig that the motherboard may be damaged, but I can access BIOS, but it's the only thing I can do with it.

  I'd be thenkful Walker of any advice or help, before moving on to official Lenovo service for help. Thnak you!

  Z.

  You can always source a new mobo on eBay, or any part on your T420 to recover some costs.

• Can I change the root password in VoP Server Explorer?

  Hello

  I was encouraged to see VoP Server Explorer, but my network does not have any system to have a default root password. Can I change the root user password?

  Thank you!

  Jennifer Flanagan

  Altogether.  Just connect to the console as root and type 'passwd' to change the root password.  Be sure to keep track of what you set, because there is little recourse except in single-user mode if it goes astray.

• Windows 7 stuck on the Windows startup screen. Help!

  I was playing a game (Counter Strike: Global Offensive - on Steam) on my PC I got the blue screen error was 0x000000A3, after that I booted my PC then it got stuck on the Windows splash screen. Now, when I start my PC it gives me only 2 options, "start Windows normally" which leads to frozen Windows startup screen and it gives me this: '(recommended) launch Startup Repair' that I have used and tried all the options, except the command prompt like I do not know how to use it.

  My PC is a Windows 7, Asus

  Hello

  Often, this will work when the built-in repair software will not.

  Make your own information system repair disc in this tutorial:

  "How to create a Windows 7 system repair disc"

  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  "This will show you how to create a system repair disc Windows 7 to be able to use to start the system recovery options to help recover your Windows 7 installation, if you have not a Windows installation disk, can't find your Windows installation disc or can not access the recovery options provided by your computer manufacturer.

  A system repair disc is not able to install Windows 7.

  Note

  If you are unable to start your Windows 7 to create a Windows 7 system repair disc, and then you could create on another computer for use on your computer. »

  _____________________________________

  Then, use this disk for System Recovery Options:

  "System recovery options".

  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  "How to run a startup repair in Windows 7"

  http://www.SevenForums.com/tutorials/681-startup-repair.html

  See you soon.

• Stuck at the start-up screen

  Hi, I use Jdeveloper 12.1.3 and the extension of the ADF Mobile on Mac OS X Mavericks. iOS 7.1 and Xcode 5.1.1

  If I make an application with a HTML file and deploy Simulator iOS, the app works great.

  If I apply with an AMX-page the and deploy on iOS Simulator, the app is stuck at the start-up screen. "Loading...". »

  Any ideas? I tested the "Navigation" public sample and deploy and works very well.

  Concerning

  Thomas H

  I looked in the debugging using the iOS Simulator. The problem causing my problem was not supported for encoding. I used ISO-8859-15. Changed to UTF - 8.

  Thank you for you detrilles Sudipto link on debugging =)

  -Thomas H

• Windows is stuck at the "Closing Windows" screen

  Hello:

  I'm having a problem with the Fusion 4.1.3 on an iMac 2010 10.7.3 running. Windows XP is stuck at the "Closing Windows" screen. What can I do to complete the procedure to stop and then restart Windows?

  Thank you

  Post edited by: JP7469

  Try to do a forced shutdown... Virtual Machine menu > Option key > Force Shut Down

  Take a look on: switch Power controls from the default Options

• Special characters used for the root password

  Don't vSphere 4.0 support characters other than the numbers/letters for the root password, such as # or $?

  This should not be a problem.  In addition, see below

  http://KB.VMware.com/kb/1012033

  .. and is this question which relates to PowerCLI, otherwise I can move the thread

• To connect by SSH slow to deal with the root password

  Strange question here, more than inconvenience cause really questions. I just did an install ESX 4 on a G5 BL680 vanilla. I enabled root ssh and sshd restared so I could connect and configure with PuTTY. In the putty session, after that I entered the root password, it takes about 50 seconds to complete the opening of session - every time... The same server by connecting with the ILO, it is as usual. There isn't any other slow once connected, just that. Other ESX hosts on the same subnet (ESX 3.5) do not have the same problem. I tried to restart sshd, restart the server. It has all the latest patches for ESX 4.0. Someone has an idea of what he does all this while?

  Thank you

  Randy

  Check if you have DNS configured correctly or at all.

  cat /etc/resolv.conf

• 10gAS - game fixes installation problems - to the SYS password screen

  Hi all
  
  We now apply the fix 10gAS set 3 in infrastructure, as well as home of the discoverer.
  
  1. update of the database to 10.1.0.5
  Just before the beginning of step 2 reset the sys password
  2 started the patch set 3 Installation [ patch 5983622 ], and to the sys password screen I entered the sys password and click Next. Got the below error message
  
  «Impossible to validate the connection of the < NomServeur.nomdomaine.com > database SYS user: 1521: < sid.domainname.com.» Check your SYS password is correct and that the database is running'
  
  I even tried to reset the password and restarted the installer, but the same error
  I even tried to restart the database and restarted the installer, but the same error.
  
  Listening port is running
  
  Please advice,
  
  Thank you and best regards,
  Rakesh

  Rakesh,

  Please see the following documents.

  Note: 303669.1 - repository of metadata Patch failure: could not validate for the SYS database user login
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=303669.1

  Note: 468158,1 - "Unable to validate the user SYS" error during Installation of the Application Server fix
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=468158.1

  Note: 552759.1 - by applying the Patch 10.1. 2.2 metadata repository fails with "Unable to validate for the SYS database user login"
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=552759.1

  Kind regards
  Hussein

• Pavillion dv7-1264nr: stuck in the administrator password. .. . . .. Enter unlock password key can 59479634 anyone help?

  my pc goes to a black screen after it held a dfrag at startup, then just empty, I ' is trying to restore and it jumped to an update of windows who says 6 of 68 or something and sat there for hours, I am doing safe mode, the administrator password went to enter unlocking password(key:59479634) , the vista came on it I guess and was running windows 8 pro, can someone help me?

  @nick65

  Please enter:

  46551210

  Kind regards.

• HP Pavilion P6724IT: Hp Pavilion P6724IT stuck to the HP splash screen after the installation of the new VGA

  Hello people.

  I buyed a new VGA, a Gigabyte GT740 2 GB DDR5, before I had an Asus GT630 2 GB of DDR3 memory and had no problem with it.

  After you mount the new VGA, I noticed that the computer gets stuck to the initial start with the HP logo screen.

  Can't even get to the BIOS, but if I remove the card and use the igpu it is all ok.

  I tried to update the bios with the latest version on the HP website (v.7.15) and nothing.

  Tried to install it with Windows 8.1 and windows 7, nothing.

  I tried all the things I found on the net of people with the same number, nothing new.

  If I'm pretty quick and I press certain keys we Gets the black screen and stuck in any case, do a few beeps and then go to a kind of sleep and if I keep pressing a key, it makes little noise Cracklin'.

  In fact I can't afford a new motherboard so I wanted to know if I can find a solution to the problem, because it's really frustrating and I spent much time trying to understand with your help.

  Sorry for my bad English!

  Hope someone can help me

  See you soon

  @wb2001  Thank you for asking me to review this theread.

  ZeroProsekt,

  You must answer such questions as published by the wb2001.  If you do not know the answers, then contact the manufacturer of the graphics card and ask for more information on the graphics card of specific model you are trying to use.