Similar Questions

• esxcli software error

  Hi all

  I couldn't this post in the PowerCLI section as it seems to be only available to developers, so this is the closest forum I could find.

  I try to follow some instructions from a Dell website to check if the VIBs have been migrated across, then I ran an update 5.0-> 5.1 via VUM.

  The command is: esxcli list of software vib | grep open-i

  during the same execution software esxcli , I get the error:

  Get-EsxCli: 25/09/2012 10:48:12 Get-EsxCli method or the
  n is not implemented.
  Online: 1 character: 7
  + esxcli < < < < software
  + CategoryInfo: NotSpecified: (:)) [Get-EsxCli], VimException)
  + FullyQualifiedErrorId: Core_BaseCmdlet_UnknownError, VMware.VimAutomatio
  n.ViCore.Cmdlets.Commands.GetEsxCli

  It was after that I ran: Connect-VIServer and received confirmation that I have connected with the release:

  Port of user name
  ----                           ----  ----
  VM04 root 443

  The original instructions, I'm following can be found here:

  http://www.Dell.com/support/drivers/au/en/aulca1/DriverDetails/product/PowerEdge-R710?driverId=W32PK & osCode = XI51 & 3006491785 = starts

  .. under "using the power of CLI.

  Any help or if someone could point me in the right direction would be much appreciated!

  Kind regards

  Jon

  The "'esxcli list of software vib" is an order of vCLI VMware. " In PowerCLI you can do as follows (replace MyHost bearing the name of your ESXi server):

  $EsxCli = get-EsxCli - VMHost "MyHost."

  $EsxCli.software.vib.list)

• ESXi Update 2 - host UI - 503 errors

  After upgrading my host to U2 6.0 today, I get 503 errors:

  503 service unavailable (unable to connect to the endpoint: [N7Vmacore4Http16LocalServiceSpecE:0xffa014e8] _serverNamespace = _isRedirect/IU = false _port = 8308)

  Do not know what is happening.  A ran the get command to see which version I was dual control:

  [root@ESX-LAB-03: ~] esxcli software vib get esx - ui - n

  VMware_bootbank_esx - ui_1.0.0 - 3617585

  Name: esx - ui

  Version: 1.0.0 - 3617585

  Type: bootbank

  Seller: VMware

  Level of acceptance: VMwareCertified

  Summary: Host VMware Client

  Description: A built-in web UI for ESXi

  ReferenceURLs:

  Creation date: 2016-03-03

  Depends on: esx-version > = 5.0.0

  Conflicts:

  Replaces:

  Offers:

  Required maintenance mode: false

  Required hardware platforms:

  Installation allowed to live: true

  Remove allowed to live: true

  Loan without a State: true

  Overlay: false

  Tags:

  Payloads: esx - ui

  Any ideas?

  FIXED!

  All what you need to do is remove the ' / ui' line of the ' / etc/vmware/rhttpproxy/endpoints.conf' and restart the service rhttpproxy by race "/etc/init.d/rhttpproxy restart".

  Fact!

• KB976569 offered via windows update again and again, properly installed

  Hello

  I have XP Home Edition SP3.  I installed this update several times, but he continues to appear in my list of updates on the site of Microsoft Updates of the software to install.  Whenever it says the installation was successful.

  It appears in Add/Remove programs as if it has been installed, so why is this update continuously displayed in the list of updates must be installed on the Windows Update site?

  Any suggestions or explanations would be appreciated. Eric

  What is KB976569 listed in Add/Remove Programs [Yes/No]
  
  Yes

  Automatic updates (or the Windows Update Web site) still offers KB976569? [Yes/No]
  
  Yes

  The following may solve the behavior:

  1. stop the automatic updates service:

  Start > run > services.msc (enter) > [OK]
  Double-click Automatic Updates > click Stop
  (Stopping the service will take a moment)

  2 remove the contents of the download folder:

  Start > run > %windir%\SoftwareDistribution (enter) > [OK]
  Open the download folder and delete its contents
  Close the window.

  3. go to the Windows Update Web site. Select CUSTOM and allow the analysis to be performed. Uncheck/unselect KB976569 and hide ("don't show me this update").

  4. start the automatic updates service:

  Start > run > services.msc (enter) > [OK]
  Double-click Automatic Updates > click Start
  (Starting the service will take a moment)

  NB: If you are running a manual check for updates at http://windowsupdate.microsoft.com, you will see a prompt saying: 'you have hidden a significant update. You want to install it now? "Answer NO to this prompt.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Updated MS page error: "files required to use Microsoft Update are longer registered or installed on your computer.

  Original title : Could not get the MS update or reinstalled is recorded on the XP Home SP3 machine

  Problem: MS page update error: "files required to use Microsoft Update are longer registered or installed on your computer.
  Now, I can't verify what has / has not been done!  Updates for years, now he did!

  Sort of bumped into a wall after trying a bunch of stuff. Here's what I've done so far:

  User login was Admin status for all activities tried & emumerees below, the various assignments of site Ms.

  Difficulty of test #1 (software installation)
  He tried twice with & without entering a "net.exe stop wuauserv" before trying to install it
  "c:\WindowsUpdateAgent30-x86.exe /wuforce".
  Installation failed with the error number after: 0x8024d007

  Difficulty of test #2 (registers dll files)
  He tried twice with & without entering a "net.exe stop wuauserv" before trying to register the dll
  DllRegisterSerer in c:\windows\system32\wuapi.dll failed. Return code is 0x80070005
  DllRegisterSerer to wuaueng1.dll succeeded
  DllRegisterSerer in successful c:\windows\system32\wuaueng.dll
  DllRegisterSerer in c:\windows\system32\dllcache\wucltui.dll succeeded
  DllRegisterSerer to successful wups2.dll
  DllRegisterSerer in c:\windows\system32\wups.dll succeeded
  DllRegisterSerer in successful wuweb.dll

  (checked the version of the file c:\windows\system32\wuapi.dll is 7.4.7600.226 in the system32 directory)

  Difficulty try #3 (MicrosoftFixit)
  MicrosoftFixit50597.msi--> ran, but he did not set

  Ran the Microsoft 1.0.3001.0 Security Scanner - nothing found

  A ran Malwarebytes Anti-Malware 1.61.0.1400 - no malicious items detected

  I have my "WindowsUpdate.log", but don't see a way of fixing here

  Help.

  Hi Dena. Thanks for check up.

  My machine now works. Here's what happened between my last post and the MS update feature works once more.

  I answered my own question about the SubInACL is allowed file to use on my machine. Googling it I found that it is a 'security descriptor and Editing Migration command-line tool' and that it would work on my XP Home edition. So I have done no harm. But he didn't explain why the machine does not respond to a stop command.

  So, with no harm done and an available restore point, I thought that I would see what the SubInACL program since the drive light was working but no message readable in detail until it was over.

  Googling the first line (echo off) in the batch file led me to a MS page that explains the function of command to echo. If I wanted to see out all I had to do was remove the echo off line. So I used Notepad to remove the line and saved the file. Re-run the bat file then produces a flow of lines in the cmd window - moving too fast to read. I got what I asked for but don't want that I really needed.

  Google "screen xp file output. The second Google result was a link to www.microsoft.com/resources/documentation , which explains how to redirect the output of a command file into a text file. So I followed the example and added a ">" and a unique filename at the end of each line. Worked like a charm. Weres big, very big files. All order lines have reported no failure except HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet which had modified 204160 entries and lines 901 has failed. Looking at a small sample of these faulty items, that they seem to belong to my McAfee AV, so I expect them to be special.

  A reboot of the machine successfully. Still didn't update.

  I ran the MicrosoftFixit program with no error reported.

  Rebooted and found the update feature works again. Cross my fingers batch of this next month of MS updates does not return this ghost.

  Hope someone can benefit from my experiences.

• Error message: the files required to use Microsoft Update are longer registered or installed on your computer.

  As I never had problems with Microsoft Updates in the 3 years that I've owned this computer, I am confused now what has happenned.

  My laptop has a valid copy of Windows XP Professional and has always already been updated successfully, both manually by using the web page for the custom updates and so automatically.

  Can someone please shed some light on the question and how to fix it?  I obviously don't want to need to format this computer.

  I still regularly ran my anti-virus (N360 which is always updated) software and windows defender.  I have also always used Spybot S & D.  None of the mentioned software found no major problems, as I expect, because they are supposed to prevent intrusions. I also run the current Microsoft malicious software removal tool as an extra precaution.

  My problem is:

  After you perform a system restore to an earlier date on my laptop, I wanted to check windows update to make sure that all my security updates are in and up to date.  I opened the page to update as normal, then I accept the license agreement and I continued to the next screen.  Normally, I don't have to do this, he usually directly goes to the page.

  Then, I got this error message:

  The files required to use Microsoft Update are longer registered or installed on your computer.
  
  It is possible for me to choose
   "register or reinstall the files now (recommended)".
  However when I try this option I'm headed to the next web page where I get another error message:

  403-Forbidden: access is denied. You don't have permission to view this directory or page using the credentials you supplied.

  Could be a problem of hijackware but first see this archived thread WinXP general newsgroup: http://groups.google.com/group/microsoft.public.windowsxp.general/browse_frm/thread/4789b22822070e68/ee1886e36b8d6608?#ee1886e36b8d6608

  QED: Have you installed an update to wireless card that had been offered by Windows Update, the other day? ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Get the error message "Microsoft MSXML 4.0 or higher, not installed" when you use Nero Software

  Original title: using Nero Software on Vista service pack 2.0 and get error Microsoft MSXML 4.0 or not installed.  In my view, the folder is empty, I programs and I can simply download to Microsoft?

  Using Nero Software on Vista service pack 2.0 and get the error Microsoft MSXML 4.0 or higher is not installed.  I find that the MSXMLfolder is empty.  NERO software worked very well and I have no recollection of doing an update of MS or NERO, so don't know why it doesn't all of a sudden.  Do I create programs and can simply download the modules of MSXML from Microsoft?

  Hello

  Download and install the package manually and check.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=15697

  Hope this information helps.

• Impossible to go online using Internet Explore after installing updates

  Title: I use Windows Vista Home Ed and after installing Windows updates 08/22/2012 (7 in total) I can't access any site on Internet Explorer without using the system restore

  I use Windows Vista Home Ed and after installing Windows updates 08/22/2012 (7 in total) I can't access a website on Internet Explorer. I need to restore my computer to the 21/08/2012 and then, all right, but I don't want to have to do that every day. Any ideas?

  The Windows updates were installed automatically and there was 7, so I can't identify which could be the cause of the problem. I also have access to internet via Sky which is my broadband provider. I use Internet Explorer 9.

  Hello

  -You have Windows Vista SP1 or SP2 installed on your computer?
  -What is the error message accurate/complete that you receive when you try to go online using Internet Explorer after you install the updates?
  -Is the issue not limited only with Internet Explorer or other web browsers?
  -What software Antivirus installed on your computer?
   
  Method 1: I suggest to follow the steps from the link below and check if the problem persists.
  Can't access some Web sites in Internet Explorer
  http://support.Microsoft.com/kb/967897
  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings
   
  Method 2: If the problem persists, I suggest you to see link below and check if it helps.
  "Internet Explorer cannot display the webpage" error in Internet Explorer
  http://support.Microsoft.com/kb/956196
  For reference:
  Tips for solving problems when Internet Explorer hangs or stops working
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-Internet-Explorer
   
  Method 3: I also suggest that you install the updates in Mode safe mode with Networking if it is wired connection.
  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
   
  For reference:
  http://www.Microsoft.com/Windows/using/tools/IGD/default.mspx
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems
   
  Hope this information helps.

• I have a question about the ESXi upgrade using Update Manager...

  This is probably a stupid question, but I've never played and update ESXi using Update Manager.  We need to update ESXi ESXi 4.1 4.1 servers before vCenter 5.0 U1 from U2 (there is a known issue where the ESXi 4.1 servers receive the GROUP after upgrading vCenter to 5.0 U1).  We used HP ESXi image to install ESXi on our servers for new installations.  This image contains ESXi.1 U2 as well as the drivers of HP and CIM.

  4.1_U2_Oct_2011_ESXi_HD - USB-SDImgeInstlr_Z7550 - 00241.iso

  Can this same image HP ESXi 4.1 U2 that we used to install to new ESXi servers, be used to upgrade our 4.1 4.1 U2 ESXi servers using the Update Manager?  Or, upgrade package should be used for the upgrade?  Also, if an upgrade package must be used, is it OK to use one provided by VMware, or will be losing our HP specific drivers and CIM to do this?

  Thank you

  Hello

  You can import custom HP ESXi 4.1 U2 ISO in Update Manager (don't forget to use the latest version of June 2012, available here: https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=HPVM06) and update the hosts with her.

  In a second step, you can then import the last custom HP ESXi ISO 5.0 (available here: https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=HPVM09) and update the hosts again with her.

  To be on the current ESXi 5.0 patch level you finally apply the latest patches from VMware via the Update Manager.

  -Andreas

• After doing a HP-assisted recovery, when I click on Windows Update, I get a message saying "files required to use Windows Update are longer registered or installed on your computer.

  I am unable to open Windows Update Express option, when you click on Express, I get a message saying that "files required to use windows update are longer registered or installed on your computer." I tried both options following the message, with no luck at all. Belarc says that the 125 Microsoft updates are missing. I have Windows XP Home Edition sp2 disk. Suggestions, please.

  If xp is always saved, then try to open the internet options settings,

  view of objects, search for & R.click on the WU & MU active x objects

  (one at a time), select "update", they are part of windows update

  Active x, necessary for updates... Express update could be among them

  Moreover, however it is not a part of windows...

• Error message "Files required to use Windows Update are longer registered or installed on your computer."

  "Files required to use Windows Update are longer registered or installed on your computer" is the message stop & updated. I owned the computer for more than 7 years & used XP all the time. Why does the update fail / stop now? What should I do to get it working?

  Hi B_Tan,

  Please take a look at the following information previously published by TaurArian:

  Some have reported that simply re-register the MSXML3. DLL seems to fix the problem.
  1. click on start.
  2. choose Execute.
  3. in the run box, type: regsvr32 MSXML3. DLL
  Press OK

  If this did not help, you may be re-recorded some files more:

  1. click on start.
  2. choose Execute.
  3. in the run box, type (pressing well after each one): -.

  net stop wuauserv

  Repeat the following:
  regsvr32 c:\windows\system32\wuapi.dll
  regsvr32 c:\windows\system32\wups.dll
  regsvr32 c:\windows\system32\wuaueng.dll
  regsvr32 wuaueng1.dll
  regsvr32 c:\windows\system32\dllcache\wucltui.dll
  regsvr32 wuweb.dll
  Regsvr32 MSXML3.dll
  regsvr32 qmgr.dll
  regsvr32 qmgrprxy.dll
  regsvr32 jscript.dll

  net start wuauserv

  FYI -.

  http://support.Microsoft.com/kb/958053
  See: method 1: save the Windows Update files

  http://support.Microsoft.com/kb/326253
  Method 5: Registry Windows Update engine files

  I hope this helps!

• I'm not able to install an updated Tally accounting software

  I'm not able to install an updated Tally accounting software. I have Tally ERP 9 version 2.0

  Now talyy is 3.0ver which I am not able to install.

  Pl help.

  Tally support must ask for help: http://www.tallysolutions.com/website/html/support.php

  John

• Why did Windows using stealth tactics and install updates without permission or notice?

  Why did Windows using stealth tactics and install updates without permission or notice?
  It becomes a regular event, it also seems to restart in the middle of the night to set up these updates. I don't know what the intention but
  [Vista 32 bit] I returned this intrusion in the files to my PC and I always despise microsoft to decide to act like a pirate.  I'll give microsoft some time to answer this, but I expect to be as horrible as they are usually with the customer service.   So in a few weeks, I'll start to smear the name of microsoft as much as possible and sway anyone my possible to buy non-Microsoft products.

  Read here:

  Microsoft Update product team blog: Windows Update and automatic reboots

  http://blogs.technet.com/Mu/archive/2008/10/02/Windows-Update-and-automatic-reboots.aspx>

  Change how Windows installs or notifies you of updates

  http://Windows.Microsoft.com/en-us/Windows7/change-how-Windows-installs-or-notifies-you-about-updates>

  If you select the download updates but let me choose... option, no update will install without your approval. Suppose an update will require a reboot and does not approve the installation of an update until & unless you are ready to restart.

  You can change the AU for the "updates but let me choose whether to download and install them" setting. Once you have done this, you will need to approve the updates are downloaded, the updates are installed and where they are installed.

  I prefer "check for updates but let me choose whether to download and install them" setting.

  UTC/GMT is 13:33 Tuesday, January 31, 2012

• Install the Kodak ESP5250 printer software and install Windows updates

  My father-in-law bought a Kodak ESP5250 printer last week, we tried to install the software without success. I was even in remote access with Kodak technology for 5 hours. There seems to be a problem with Windows Vista that will not allow the software to install. In addition, the automatic update of Windows has tried for more than a week to download and install updates of security on his computer, he has let stand for 24 hours and it will not install updates.
  He runs a Dell 1545 with Windows Vista service pack 2 Dual Core T4200 CPU and 3.0 GB of RAM.
  Can you help me solve these problems?

  Hi kcbell1953,

  Thank you for the information.

  Did you follow the steps I have provided?

  I suggest to follow the steps mentioned in the previous post and then try to install the printer software.

  You can try the following steps to install the windows updates:

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

  Step 2: Disable security software, follow the steps mentioned below

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Activate security software once everything is done.

  Step 3: Put the computer in a clean boot

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Now try to install the updates, try to install only some updates at the same time.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• What allows updates already installed software to install with out always have to have connection IT people

  I'm not an administrator in a company, just a user and I tired to see popups to update Adobe, Java and other software that is installed on this system that I can't do anything about.

  Is there a way to enable updates of software already installed to install with out always have to have people as administrator login? as at the end of the day when windows push through an update to the stop?

  original title: automatic updates

  Adobe has a check box to enable the automatic update in the window of the first or the second update.

  In the settings of Windows updates, you can set Windows updates to allow all users to install updates Windows and install to automatically when they are available.  You can also set it to just warn you when updates are available so that you can download and install it at a convenient time.

  Java has some settings, but I cannot verify this machine because I have not installed.  Check this program, C:\Program Files (x86)\Java\jre6\bin\javacpl.exe to the Java updates whenever you want.

  Try right click on the shortcut to the program, javacpl.exe and option by selecting "Run as Administrator"?  Perform, even if your user name is an administrator.  You should see if all is well then the tab Update and various parameters to play with.