Ethernet IP & events
I am communicating with a PLC using ethernet IP. Currently I use poling in time event to read PLC labels but wants to set up an event to automatically respond to a change in a tag value. Does anyone know how to do this?
Unfortunately, keep voting PLC, since the library is not for you. What I recommend is to use another loop for Ethernet/IP communications and send a user event when a value changes to inform your main loop.
Tags: NI Software
Similar Questions
-
Updated at EL Capitan 10.11.6 broke my Ethernet again
Hello
I just put my 2 x NewMacPro 2013 to El Capitan10.11.6. But Ethernet was not working after update... "It was the same situation as 'Inconsistent data from the Configuration on the Extension of Kernel 3.28.1' event ' if the Ethernet on your Mac has stopped working recently - Apple charge «...»
It happened only in NMP, old Mac Pro 2011 update 10.11.6 is fine.
Who can help me solve this problem?
This time is 'Core Suggestions data Configuration, V758' problem?
'' The access controller Configuration data, V93 ''?
'Data configuration of the MRT, V1.9'?
"CoreLSKD Configuration data, V8?
"XProtectPlistConfigData, V1?
or "to update OS X El Capitan, 10.11.6.
Thank you
The interface.
Not yet solve...
---
-
I have an undesirable on the 1st floor, connected to the cable modem Ethernet event. I want to connect that AE to an another AE on 2nd floor with ethernet cable AND have a 3rd AE on the 1st floor to receive music through AirPlay wireless. I thought that linking the two first AEs with ethernet would improve the performance of web site on my iMac desktop, which is on the 2nd floor and connects to the 2nd floor AE via wifi. The EI the first two are newer model (MC414LL/A); the 3rd AE is old model (MB321LL/A) and is connected to a stereo Bose with a mini-jack to RCA cable double cord. I tried to set up this network using AirPort Utility, but have had no success. I don't know if it is possible to do what I want to do; and if this is the case, I don't know how to set the various parameters for each AE using AirPort Utility. I've temporarily implemented a purely wireless network; Do not connect DO NOT the two AEs with ethernet and everything works. I would enjoy my plan as above, or if I hold with purely network wireless. Any help would be greatly appreciated.
Using ethernet network roaming between the two floors is a much better idea than anything wireless.
The installation should be automagical if you start with the two AE plugged in by ethernet.
It must be configured in standard roaming with identical names wireless.
If you have any questions... Please, just after the airport utility screenshots of the configuration... but
An express train is probably the router? You must confirm this.
The second express is so configured in bridge... It's on the network tab, disable the bridge mode.
Without thread is set to create a wireless network and simply use the same name and the same password as the other Express.
As it should be automagical when you WAN on the second AE plugged into the LAN on the first AE.
Wireless and then extend to will also be installed enough well automatically even if sometimes it works better in a client that extend wireless mode.
See the Client mode.
AirPort Express: How to join an existing client mode - Apple Support Wi - Fi network
-
Tecra M11 - 10 d
Recently, I connected a network cable for my laptop. This cable seems to be a Poe cable. Ethernet standard, but with a power supply to power a video conference phone.
After this event, my network card does not work. Ethernet lights don't work. My windows 7 says that a cable is not connected.
In Device Manager, I uninstalled the network device and when I'm looking for material changes it finds my network device but it still does not work. It is not a software problem.
Is it possible for this Poe cable to have fried my Ethernet card?
Any suggestions to resurrect my Ethernet?To be honest I put t have experience with these issues but if you want to test how the hardware install original recovery image and test the operation of the equipment with the settings.
It is certainly the best way to test the operation of the equipment.
Please post comments.
-
Ethernet problem on wake since 10.11.2
Since I installed the latest (10.11.2) El Capitan refreshes, if my end 2013 27 "iMac wakes up, intermittently, the network does not work (browser cannot load a URL, Mail does not work, etc.). It is not just DNS as incoming IP addresses does not work either. The machine is connected by Ethernet, no wifi, and the wifi is turned off. The machine has a fixed IP address on my home network and don't use DHCP.
When the failure occurs, if I disconnect the Ethernet cable from the back of the Mac and reinsert immediately, networking features are restored. This machine has worked perfectly in this mode because I bought it in March of 2014; It is the first time I've seen this kind of problems when he wake up. I usually put to sleep using Cmd + Option + Eject or leave it to sleep alone. Intermittent failure in the morning seems to be independent of the way in which he fell asleep.
Anyone has any ideas I could try?
1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.
Do not be put off by the complexity of these instructions. The process is much less complicated than the description. You make the tasks more complicated with the computer all the time.
2. If you do not already have a current backup, please back up all the data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.
There are ways to back up a computer that is not fully functional. Ask if you need advice.
3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.
You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.
In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, so any person with the required competence can check what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this site of thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.
Another indication that the test is safe in this threadand this onecan be found, for example, where the comment in which I suggested it was recommended by one of the specialists of the communityApple, as explained here.
However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.
4. here is a general summary of what you need to do, if you decide to go forward:
☞ Copy a particular line of text to the Clipboard.
☞ Paste into the window to another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Stick the results, which will be copied automatically, in a response on this page.
These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.
5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.
You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.
6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.
7 load the linked web page (the site "Pastebin.") The title of the page is 'Diagnostic Test'. Under the title is a text box, headed by three small icons. The right one represents a Clipboard. Click on this icon to select the text, then copy to the Clipboard of your computer by pressing Control-C key combination.
If the text is not highlighted when you click the icon, select it in triple - click anywhere inside the box. Do not select the whole page, just the text in the box.
8. start the Terminal application integrated in one of the following ways:
☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).
☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.
9. If you see an error message in the Terminal as "Syntax error" or "Event not found", enter
exec bash
and press return. Then paste the script again.
10. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.
If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.
If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.
11. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:
Test started
Part 1 of 4 done at: … sec … Part 4 of 4 done at: … sec
The test results are on the Clipboard.
Please close this window.
The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.
Wait for the final message "Please close this window" appears. If you don't see it in about 15 minutes, the test probably won't be all within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something. If you close the window of the Terminal, while the test is still running, the partial results will not be saved and you have to start over.
12. when the test is finished, or if you have stopped it because it was taking too long, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.
At the top of the results, there will be a line that begins with the words «Start time.» If you do not see that, but rather to see a mass of gibberish, you wait for the message "close this window". Please wait and try again.
If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.
13. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.
If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.
14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but what're told you to do maybe not. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.
______________________________________________________________
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the "Test of diagnosis" referenced), I reserve all rights except as provided in the terms of use agreement for the site of Apple support communities ("CSA"). ASC readers can copy for their personal use. The whole nor any part can be redistributed.
-
I am connected with the nearby ethernet cable but I can't connect to the network.
I connected with the surroundings but ICAN t ethernet cable get internet
Hello
1. what operating system is installed on your computer?
2. What is the error message when you try to connect to the Internet?
3. don't you make changes to your computer before the problem?Search for related errors in the event viewer.
Follow the steps in this article if you are using Windows 7.
Why can't I connect to the Internet?
http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet -
Event/o VISA and viReadAsync - how to use them?
Hello
I am trying to install a handler for IO VISA in my code that will read the data of the TCPIP socket. The data are to be pulsated in connected equipment. I did the following successfully:
Opens the default resource manager,
Opens the ethernet device,
Set the attribute to TCPIP NODELAY
Set the timeout for 5000
Installed my manager
Permit in the event of e/s
I now expect this event to launch every time that data of the impulses from the device. Am I correct in this assumption?
In my event handler, I perform a viRead for the maximum number of bytes that I expect to get. From what I see the event handler does not run. I looked for examples of code for this and I can't find nothing explicit. I read about the viAsyncRead, but I don't want to read until that data is from the device... or am I wrong here, too. This is my real first shot using VISA with ethernet - in general, I did the serial port RS232 work with a timer async and the Windows entry queue.
All the advice/help is appreciated.
Thank you
Judy
Judy Hello,
You might consider treatment initially interaction with your generic device such as a TCP/IP connection. This will allow you to specify a callback function in the time you connect, which is triggered in response to a number of events. One of these events is called TCP_DATAREADY, which seems especially about your situation. The particular event detected is specified in the parameter to the callback function xType. In the body of the callback function, you can then run the various VISA features you want. An example that shows this approach is called a server side finger.cws. You should be able to find this example by searching in the finder for example CVI for TCP.
-
Hello!
I am working on a Dell Inspiron 1300 laptop for a friend. She has Windows HP Home Edition, SP3 installed.
He said that Saturday night he started to act funny and wouldn't connect to the Internet. There were a few popups then begins, and he did not know if they were connected to not go on the Internet.
He had the rootkit.zeroaccess infection. I used Combofix to remove it. It won't always get on the Internet, either via a wi - fi or ethernet connection.
Looking at the event viewer, I see event ID 7003, "the TCP/IP protocol driver service depends on the non-existent service below: IPSec."
Then, event 7001, "(NLA) network location awareness service depends on the service protocol driver TCP/IP which could not start due to the following error: the dependency service does not exist or has been marked for deletion.".I copied ipsec.sys from another XP Home machine which worked and stuck in the Windows\System32\drivers directory and it still does not work.
Any ideas are greatly appreciated!
Dave
Hello
See this link:
http://TechNet.Microsoft.com/en-us/library/cc958861.aspx
Let us know the results.
-
missing events in the event log
I'm really new and can't help otherwise explain what just happened to me. I am running Vista home and checked my reliability and performance monitor. He came back to me with missing events to the event log. 14% of my missing log files. He told me that my buffer size and maximum ETW memory buffer is not obtimal that the data sets are collected. I have AVG free virus and found no problem. I had a lot of problems with the security of the networks and curious to know for myself if someone takes information just behind my computer. Everyone acts as if I am perinoid, but I had log events while at work and shut down the system. Some are could not log on to attemtps still more successful. Many programs also show other computers on my network even glancing only ethernet to my dsl modem. So I'm not under xp but have the same diagnostic report. I would be grateful no sign, that I am not paranoid. thanx
Hi Dancin' madman,
Welcome to the Microsoft Vista answers Forum!
I would like to ask you a few questions in order to get a better understanding of this issue so that we can better help you.
(a) what version of Vista are you using?
(b) is connected to a domain, or more than 10 computers in your computer network?
(c) what the event log you are trying to check?
For example, if you check the log of events for an Application, then you must
1. click on Start, type Event Viewer in the start search and press enter
2. in the Windows logs , select the Application, it should be under the winlogon (the last)entry. Right click on the Application and select Properties.
3. in the Properties , you can check for the latest event logs and check the settings if it is set to replace the events, if you want, then you can change the settings.
Because you are worried about the security of the network, you can try first run a scan of online security.
Follow the below links for analysis online on your computer to verify if there is a malicious software on your computer.
http://OneCare.live.com/site/en-us/default.htm
http://www.Microsoft.com/security/malwareremove/default.aspx
You can also check if the Services of Windows Event log and dependence are started.
1. Click Start, type Services in start search box and press ENTER.
2. Locate the Windows event log in the mentioned Services.
3. check if the status is started. If the condition column is blank, right click on the Windows event log Service and select start.
4. open the Windows Service event log, select dependencies. In dependencies, select the Windows event collector and click ok to start the service.
5. also check the dependencies in the Windows event collector and launch service dependencies by clicking OK.
Hope the helps of information.
Please post back and we do know.Concerning
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I have an error in my event viewer: the fault bucket + 45216 0xD1_athr, type the name of the event 0: BlueScreen
Can someone please explain to me how to solve this problem. My computer shuts down whenever I get on the internet. I need some answers please.
You have a problem with a driver Atheros.
It could be the network card is bad or the driver is damaged.
If it is a wireless card, try to connect to the router with an ethernet cable. See if you can get an updated driver from the computer manufacturer's website.
http://msdn.Microsoft.com/en-us/library/ff560244 (v = VS. 85) .aspx
-
ProBook 6570B: problem Ethernet (Intel 82579V)
Hello
got a laptop that does not correctly recognize the ethernet (yellow exclamation) driver. It is disconnected, ethernet cannot be used. Pilot shows an error code 10 ("this device cannot start').
Event log id: 24
Source: e1cexpress
Uninstalled the driver and I tried the network listed hp (v12.2.45.5033) driver as well as the last pilot original site Intels (v19.5.303.0). Also uncompressed exe-Intel and installed manually via the hardware Manager.
Hardware IDs:
PCI\VEN_8086 & DEV_1503 & SUBSYS_17AB103C & REV_04
PCI\VEN_8086 & DEV_1503 & SUBSYS_17AB103
PCI\VEN_8086 & DEV_1503 & CC_020000
PCI\VEN_8086 & DEV_1503 & CC_0200
Any suggestions?
BR
Michael
Once more, it works.
BIOS update did the trick.
-
Windows 7 64-bit mouse pauses/freezes/stutters often accompanied by an event sound Windows
Symptoms:
Erratic mouse behavior. Mouse hanging, the gel for a full second or more, accompanied by a Windows event sound, generally. Sometimes, there is just a slight pause and no noise Windows event. Sometimes the mouse acceleration changes after freezing. Sometimes, more rarely, my mouse will be dropped by the operating system... the laser light on the underside turns off and I have to unplug the mouse and plug it in again so he can be recognized.
What happens almost all the time. I want to use Windows mainly to play a game, World War II online: Battleground Europe. It is a shooting mmo first-person. This problem is annoying enough on the desktop. Unsuable for FPS games. I plan to have to file using Windows 7 64 bit for now.
I have this problem as soon as Windows 7 64-bit.
The problem with Windows 7 64 bit after trying many many solutions/solutions offered on the Internet.
I did not need to determine what event could be linked to it in the event Log Viewer, or if it is even an event that is be connected here.
NOTE: My mouse (G3) Logitech MX518 Gaming tips works fine, without any problems whatsoever, under Windows XP Professional SP3 32-bit with all latest updates or on Ubuntu 10.4 (Lucid Lynx) 64-bit. I never had no problem with this mouse at any time under these operating systems. These operating systems will run an intensive game if I want to, throughout the day.
-----------------------------------------------------------------
Steps in my last attempt to solve the problem.
I was looking not all parameters of the BIOS at once at the beginning. For example, I have disabled "Intel Speedstep" to see if that would solve the question. Then restarted in BIOS and disabled the C1E function when I discovered that disabling Speedstep alone does not resolve the issue. ECT, ect...
I have not installed Norton Internet Security 2010 for awhile while I tried various solutions of Workaround available and listed below in case this is the question. No difference, so NIS 2010 is now installed.
Remember, that this behavior occurs that when Windows 7 64 bit is installed properly.
(1) clean install of Windows 7 64-bit, for the third time now
(2) installed the Runtime Visual C++ 2008 64 bit v9.0.30729.4148 than kb973552/KB969706 downloaded from--> http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=2051a0c1-c9b5-4b0a-a8f5-770a549fd78c
(a) just in case Rebooted and then install the same version of the Visual C++ 2008 for 32-bit environment Runtime in Windows 7 64 bit
(3) installed Windows 7 64 - bit drivers
(a) Marvell Yukon 88E8056 Gigabit Ethernet on-board NIC Driver v11.24.5.3 (15/02/2010)
(b) various software of Creative Labs creative Labs X - Fi Titanium 64-bit driver v2.17.0007 and all updates for them.
(c) Software Driver of Intel Chipset v9.1.1.1025 (22/12/2009). Seems to just install an update from the hard disk of 64-bit driver.
(d) ATI Catalyst 10.3 Driver
(4) installed Windows updates
NOTE: I have not installed the latest four updates for now, three of them are security updates have a publication Date: 09/02/2010. I decided to not install these due to a mistake of "Circular kernel context logger" that I already saw in the viewer of the event log, recorded by "Microsoft-Windows-Kernel-EventTracing" event ID: 2 now, I'm not having this issue.
NOTE: I also installed a driver in option, the ACPI ATK110 driver, which installs the following file--> C:\Windows\System32\drivers\ASACPI.sys - he has listed as the version of the file 1043.2.15.37 and dated 29/03/2005. In a previous installation of Windows 7 64 bit, I downloaded an update of the present of Asus contained in a file/AMDCoolnQuiet_Utility_V21801_XPVistaWin7.zip utility and installed. I started the utility and he gave me the message that my system was not supported by "Asus Cool ' n Quiet. It's ASACPI.sys file was dated some time in 2009, rather than in 2005. Since my last Windows 7 install, I have currently a bit the 2005 version proposed by Windows Update installed. I don't know if this file is to load or used by Windows 7 64 bit. But I wonder...
Is this a problem?
(5) installed software v6.00.68 Logitech Setpoint (Version 4.90.80 driver) for Windows 7 64-bit
NOTE: I have not installed this in previous installations of 64-bit Windows 7 and had hoped that this would cure the problem. No change, the problem still persists.
(6) went into the BIOS and reset to the default settings
(7) BIOS: Set A.I. OC (overlcock) to "Manual" and left to deafult values so that the CPU isn't overclocked automatically or manually sort
(8) BIOS: Establish timimgs settings memory, memory voltage and the voltage Northbridge, according to my memory (memory Mushkin) manufacturer's recommendations
NOTE: Again, I didn't have never had any problem at all in Windows XP Pro 32 bit SP3 or Ubuntu 10.4 64 bit with these settings. These operating systems will run an intensive game if I want to, throughout the day.
(9) BIOS: The value of Intel Speedstep "Disabled".
(10) BIOS: C1E (Enhanced Halt State) value to "disabled".
(11) BIOS: Set the Mode of the ACPI Power / Suspend 'S3' only '
(12) BIOS: Set ACPI 2.0 Support to 'Active '.
NOTE: On, off, on any settings/functions above not has not solved the problem. I have I have not tried all the single 'combination', but in any case, make no change with the mouse.
(13) in Windows 7, I selected the Option to 'High Performance' and the value "USB selective suspend setting" to "Disabled" with updated BIOS options as shown in steps 9 to 12 above
NOTE: With BIOS defined that way there is no setting "Processor Power Management" in the Options of food, other than the 'political cooling system' (active/passive).
I left this game to 'Active '.
Is this a problem?
(14) tried monitoring DPC latency with the download link for the "DPC latency Checker" utility No visible ears in the utility during the mouse freezes / breaks
-----------------------------------------------------------------
System Specs:
(1) Intel Core2Duo E8600 (3.33 GHz, 6 MB L2, Stepping E0, CPU Cache not OC had) on Asus P5Q Deluxe (Intel P45 Chipset + ICH10R Southbridge) with BIOS 2301
(2) Zlaman CNPS9700 LED 110 mm thermal heatsink / CPU fan
(3) Thermaltake W0116RU 750W modular POWER supply
(4) Mushkin 4 GB (2 x 2 GB) DDR2 1066 (PC2-8500) RAM in Dual-Channel mode (value 5-5-15-2T timings and various other such defined memory recommended by Thierry timings.) Voltage of the memory the value 2.02v and Northbridge as recommended by Mushkin value 1.32v in the BIOS. I have never had any problem in Windows XP 32 - bit or Ubuntu 10.4 64-bit)
(5) driver software Intel Chipset v9.1.1.1025 (22/12/2009)
6) HIS (ATI) HD 512 MB 4850 with IceQ4 cooler with Catalyst 10.3 driver
(7) creative SB X - Fi Titanium with driver v2.17.0007
(8) Marvell Yukon 88E8056 Gigabit Ethernet NIC onboard with driver v11.24.5.3 (15/02/2010)
(9) Unicomp Tactile Feedback(non-mushy, clickity-clack) USB wired keyboard
(10) Logitech (G3) Gaming MX518 Wired Optical mouse with the Logitech Setpoint software (Version 4.90.80 driver) v6.00.68 for Windows 7 64-bit
11) MultiSync Samsung 214 t 21 "screen LCD Digital (1600 x 1200 native res)
(12) Microsoft Sidewinder Forcefeedback 2 USB Joystick
(13) western Digital 500 GB GB w/16 MB Cache SRTL disk HARD 7200 RPM Sata 3.0 GB / s
(14) v9.28.1886 DirectX Redistributable (February 2010)
(15) cooler Master Cosmos 1000 Full-Tower Case
(16) Norton Internet Security 2010 (firewall and anti-virus)
(17) Internet Connection Comcast 1.5 MB/s cable
(18) Windows 7 64 bit ultimate
19) Ubuntu 10.4 (Lucid Lynx) 64-bitHello again,
Can I have found the solution that worked for me. It is probably too early to tell, I'll need more time to be sure. But in case he solved the problem for me, I'll post what seems to have worked as suggested on a post, I came across from another forum. Consider a guy who tried many suggestions, maybe that's the answer. Heck, I had tried a few other things that I have said in my original post. But in any case, so far, my system and mouse seem to work very well on the desktop for the last hour and a half. I have not tried yet game.
(1) uninstall the Windows Update KB977074 (January 2010 stability and reliability update for Windows 7 and Windows Server 2008 R2).
(2) reboot and leave your system for a couple / few minutes after the restart.
(3) just in case... Restart again, and then reinstall the KB977074.
(4) restart to complete the installation.
January 2010 stability and reliability update for Windows 7 and Windows Server 2008 R2 info and the download link-->
http://support.Microsoft.com/kb/977074
Best regards and good luck,
OneTinSoldier
-
JIT - ACM with two Instance of the Ethernet on the same interface Service
Hi all
I develop script of EEM for platform of ASR903... I would define VCA two, one for each 'host' connected to the same interface of ASR903 (GI 0/1).
Each host sends CFM package, I will know which CVS the CFM package arrives. In the EEM scripting language, there are the following variable: $_ethernet_intf_name that can be used to retrieve the name of the interface. Is there another variable that can be used to recognize the VCA or is there any syslog message that conatins this information?
CFM Ethernet ieee
Ethernet global cfm
field of Ethernet HOST1 level 2 cfm
Service vlan301 evc301 evc vlan 1301 direction downwards
continuity check
!
CFM Ethernet ieee
Ethernet global cfm
area of cfm Ethernet HOST2 level 3
Service vlan301 evc302 evc vlan 1302 direction downwards
continuity check
!
VCA evc301 Ethernet
VCA evc302 Ethernet
!
interface GigabitEthernet0/1
ink description to ASR - 903 by microwave
no ip address
load-interval 30
auto negotiation
Ethernet microwave hold sending 10 event
Ethernet microwave wtr event 5
Ethernet microwave-threshold of loss of 255 event
!
service instance 301 ethernet evc301
encapsulation dot1q 301
rewrite tag pop 1 symmetrical penetration
Bridge-domain 301
CFM mep field HOST1 mpid 101
CFM encapsulation dot1q 301
!
service instance 302 ethernet evc302
encapsulation dot1q 302
rewrite tag pop 1 symmetrical penetration
Bridge-domain 302
mep field HOST2 mpid 102 cfm
CFM encapsulation dot1q 302
!
Ah, ethernet OAM. I've never used the detector of this event, so I don't know what capabilities are available. I don't have a handy to test myself ASR903. You can run the command "show event handler detector ethernet detail" to see what built-in variables are available to your EEM ethernet event policy. You can also do "display event handler detector all ' to see all detectors of the event. I hope you see something out there that specifies the VCA.
If this isn't the case, you certainly could extract something like a syslog message if a message is generated that contains the name of EVC. Still, I don't know what syslogs are generated, so you should test yourself.
-
Routing problem between the VPN Client and the router's Ethernet device
Hello
I have a Cisco 1721 in a test environment.
A net 172.16.0.0/19 simulates the Internet and a net 192.168.1.0/24 simulates the net, the VPN tunnel must go to (intranet).
The net 172.16.0.0 depends on the router 0 FastEthernet, Intranet (VPN) hangs on Ethernet 0.
The configuration was inspired form the sample Configuration
"Configuring the Client VPN Cisco 3.x for Windows to IOS using Local extended authentication"
and the output of the ConfigMaker configuration.
Authentication and logon works. Client receives an IP address from the pool. But there's a routing problem
side of routers. Ping client-side - do not work (the VPN client statistics that count encrypt them packets, but not to decrypt).
Ping the router works too, but decrypt and encrypt customer statistics in VPN packets count progressive
(customer has a correct route and return ICMP packets to the router).
The question now is:
How to route packets between the Tunnel and an Ethernet device (Ethernet 0)?
conf of the router is attached - hope that's not too...
Thanks & cordially
Thomas Schmidt
-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.- snipp .-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.
!
version 12.2
horodateurs service debug uptime
Log service timestamps uptime
encryption password service
!
!
host name * moderator edit *.
!
enable secret 5 * moderator edit *.
!
!
AAA new-model
AAA authentication login userauthen local
AAA authorization groupauthor LAN
!
! only for the test...
!
username cisco password 0 * moderator edit *.
!
IP subnet zero
!
audit of IP notify Journal
Max-events of po verification IP 100
!
crypto ISAKMP policy 3
3des encryption
preshared authentication
Group 2
!
ISAKMP crypto client configuration group 3000client
key cisco123
pool ippool
!
! We do not want to divide the tunnel
! ACL 108
!
Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
!
Crypto-map dynamic dynmap 10
Set transform-set RIGHT
!
map clientmap client to authenticate crypto list userauthen
card crypto clientmap isakmp authorization list groupauthor
client configuration address map clientmap crypto answer
10 ipsec-isakmp crypto map clientmap Dynamics dynmap
!
interface Ethernet0
no downtime
Description connected to VPN
IP 192.168.1.1 255.255.255.0
full-duplex
IP access-group 101 in
IP access-group 101 out
KeepAlive 10
No cdp enable
!
interface Ethernet1
no downtime
address 192.168.3.1 IP 255.255.255.0
IP access-group 101 in
IP access-group 101 out
full-duplex
KeepAlive 10
No cdp enable
!
interface FastEthernet0
no downtime
Description connected to the Internet
IP 172.16.12.20 255.255.224.0
automatic speed
KeepAlive 10
No cdp enable
!
! This access group is also only for test cases!
!
no access list 101
access list 101 ip allow a whole
!
local pool IP 192.168.10.1 ippool 192.168.10.10
IP classless
IP route 0.0.0.0 0.0.0.0 172.16.12.20
enable IP pim Bennett
!
Line con 0
exec-timeout 0 0
password 7 * edit from moderator *.
line to 0
line vty 0 4
!
end
^-^-^-^-^-^-^-^-^-^-^-^-^- snapp ^-^-^-^-^-^-^-^-^-^-^-^-^-^-
Thomas,
Can't wait to show something that might be there, but I don't see here. You do not have the card encryption applied to one of the interfaces, perhaps it was not copied. Assuming your description you do it, or should it be, applied to the fa0 and you are connected. Try how you ping? Since the router or a device located on E0? If you ping the router, you will need to do an extended ping of E0 to the ip address of the client has been assigned. If your just ping the router without the extension, you will get sales and decrypts that you declare on the client. Have you tried to ping from the client to interface E0? Your default route on the router is pointing to fa0? You have a next hop to affect? You have several NIC on the client pc? Turn off your other network cards to check that you don't have a problem with routing on the client if you have more than one.
Kurtis Durrett
-
Hi, Hi,
I had to replace the HARD drive on my 3 + years, Dell Inspiron N4010 (14R) with an SSD as the HARD drive has developed bad sectors and caused problems. I did a fresh install of Windows 7 SP1 once I swapped the hard drive, installed Windows and all my other software updates after that. However, I have got something wrong in the new installation (possibly the drivers I installed). I now see a series of errors on ATAPI (event ID 11) in the event viewer with this detail: the driver has detected an error on \Device\Ide\IdePort0 controller.
There are other errors as well, but they seem to all be anchored to the ATAPI error.
I tried to scan my system for the www.dell.com/support/drivers driver updates. It shows the 3 drivers as having not been installed. Even if I tried to install these several times, they are still as necessary. These are:
- Intel Management Engine Interface driver
- Intel® Chipset Mobile, Cantiga Chipset PM45/GM45/PM55/HM57/HM55 Express Chipset Family Driver
- Qualcomm-Atheros AR8152 PCI - E Fast Ethernet Controller Driver
I wonder if these issues are related. Also, I do not know if the updates of windows is causing these issues. Any suggestions or help to remedy this?
Hi Alain,
Install the SATA AHCI drivers included in the Intel "driver"RST and driver AHCI and GUI"package. It can be found here:
Maybe you are looking for
-
My son uses his laptop computer HP15 home to his office, rarely transporting. He never gave it and a sweet user. The left hinge seems to be broken / defective, and separates the window. For now, we are all leaving the screen open all the time, but
-
World Of Warcraft questions form
I connect to the warcraft universe and items do not appear in the screen. As if they were invisible. When I'm in the game, macro bars and my items slots and great are alls invisible, that I can see is my character and the earth around me that I have
-
Acer Predator G6-710 BSOD works well after the connection, but...
Hi I'm new to the forum. My question is that if someone else got some error checking to restart error and if so, how to solve it. I'll share the info I get from Whocrashed from the dmp files. I am running windows 10. ------------------------------
-
80-year-old wants new PC without internet
My father wants a new laptop, but does not have access to the internet. This would be OK except that each new PC says 'internet required and not included.' I can provide internet for updates and intial configuration, however it will be questions usin
-
Using lightroom on multiple computers on $9.99 plan...
Hi, I have creative cloud put in place on my laptop (plan of $9.99) and also want to have lightroom installed on my office, what is the process to do this, or what I need to upgrade the plan to use on multiple computers, need help sooner rather than