Etrecheck: Demons Lauch system failed

Similar Questions

• I need to get the bookmarks from a backup hard drive that the system failed on. were can I find the file/folder of bookmarks?

  I need to get the bookmarks from a backup hard drive that the system failed on. were can I find the file/folder of bookmarks?

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729 .NET CLR 3.0.30729; NET4.0C; Media Center PC 6.0)

  Bookmarks are stored in a file called places.sqlite in the profile folder.
  To find out where the profile folder, see http://kb.mozillazine.org/Profile_folder_-_Firefox

• Application of automatic certificate for local system failed (0x800706ba) the RPC server is unavailable.

  I get these errors on some Windows 7 machine "registration of automatic certificate for local system failed (0x800706ba) the RPC server is unavailable" ID of the 6 event and event ID 13

  "Registration certificate for Local system failed to enroll for a certificate of computer with application ID N/A dc.contoso.com\contoso-DC-CA (the RPC server is unavailable." 0X800706BA (WIN32: 1722)). »

  other windows XP, Windows 8 and windows machine 7 receive the certificate through auto-enrollment.

  Hi Sam,

  Thanks for posting your query in the Microsoft Community Forums.

  Because the issue is limited to with RPC server, it is better suited for the IT Pro TechNet public. Please ask your question in the Forum on TechNet Support. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro/
  I hope it helps. If you have problems in the future, please let us know. We will be happy to help you.

• 2 tab Lenovo A7-30HC, A7-30HC_S000021 update system failed on the verification of signatures.

  I checked on the system update and found that my Lenovo Tab 2 A7-30HC new get updated.

  My current version is Lenovo_A7-30HC_S000016 and he should get Lenovo_A7HC_S000021.

  The new version says Info: this firmware update will fix bugs and improve the stability of the device.

  Well, I have this upgrade will fix problem to my Tablet touch.

  I tried to update using the Update menu of the system, but failed. Then I tried to update with Lenovo Smart Wizard to my laptop but it also failed.

  He said something about the signature failed. Here's the full disclaimer:

  A7-30HC_S000016_141223_ROW

  Failure of the verification of signatures. Abandoned facility.

  Has anyone tried to update and get the same problem? How can I update or perhaps done so far is not compatible with my tablet, but why it displays on my update of the system?

  Thank you before any intervention.

  
  

• system failed because iertutil.dll was not found.

  When you start windows xp pro starts then stops and says this application has failed because iertutil.dll was not found.

  When you see a message like this:

  Explorer.EXE - unable to locate component: this application has failed to start because iertutil.dll was not found. Reinstalling the application may fix this problem.

  It is in the case Log:

  Event type: Information
  Event source: Application Popup
  Event category: no
  Event ID: 26
  Date: 18/02/2010
  Time: 08:38:48
  Description:
  Application popup: Explorer.exe - Unable to locate component: this application has failed to start because iertutil.dll was not found.  Reinstalling the application may fix this problem.

  The iertutil.dll file is required for explorer.exe at startup.  If explorer.exe is not able to run, you will not be able to do much with your system until the file is replaced.

  The file may have been deleted accidentally, malicious software could have deleted or your anti-malware software could have been quarantined it thinking it was a threat.

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  First of all, here are all the things you can 'try' which do not work:

  sfc/scannow

  The iertutil.dll is not one of the files that are protected by Windows File Protection, so it will not be replaced automatically if it's missing 3498.  This means that sfc/scannow won't help you.

  It is also not on your XP installation for you CD to copy or develop.

  You will have the same problem trying to start in any Safe Mode.

  You will not be able to run a browser on the system afflicted to go on Internet download one.  There is also a computer big security risk when downloading files from Internet sites anyway.

  You can still use the Task Manager to run the system restore and back, but I've never tried.

  If iertutil.dll is missing, you can copy from a system that works in the system afflicted with the same version of XP and Internet Explorer or sometimes copy one from another location on your system.

  You can get a good copy and put it on a floppy disk, thumb drive etc and copy it to your system plagued by using Manager tasks.

  When you see the error, you can click beyond it and eventually arrived at your screen background image where you can press CTRL-ALT-DEL to start Task Manager. TM you can click file, new task, browse and edit the menu drop-down "Files of type" to all files that you can see all the files in all the folders.

  Browse/navigate to c:\windows\system32 if iertutil.dll is really missing. If the error appears again while browsing, click OK to get past it.  The explorer.exe tries to run and cannot until the missing file is replaced.

  Then, still using the Task Manager, go to the c:\windows\system32\dllcache and see if there is a copy of the file.

  If this isn't in c:\windows\system32\dllcache, it is going to be elsewhere on your system and you will find another way.
  Start by looking in c:\windows\system32\dllcache.

  If it's the only thing missing, you can just copy the file to the c:\windows\system32\dllcache and paste it into c:\windows\system32 where it belongs.  If you don't, get one from a working system of the same type as yours, copy to a Flash DRIVE or a floppy disk and always using TM, browse, copy and paste it where it should be.

  TM, you can always access your thumb or other media same diskettes by navigation, copy, paste, etc. all work fine.

  You use TM to navigate to your thumb or floppy disk, copy the iertutil.dll good and then paste it in the c:\windows\system32 folder, where it is supposed to be.

  When go you there once again, your system may still be affected so no matter what you use for malware protection.
  follow these steps:

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  It can be uninstalled later if you wish.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• starting system failed at checkpoint [USBd]

  Fact a reboot after upgrade to Office 2000 to 2003 and the screen froze with a blinking cursor in the dark.

  F2, F11 or F12 does nothing.

  Ctrl + alt + tab produces a momentary vision of the start screen and changes to a black screen with the message: «...» "Previous attempts to start this system have failed at checkpoint [USBd]... »

  I need help to get back on the pc. (Dell Dimension 2400 Series, version of the Bios A02), Win XP.

  Hi Befudd,

  We are happy to know that your computer works as expected. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

• HPE 570 T operating system failed - hard drive may be gone

  I have a HPE 570 T where exploitation would not start this weekend.  I got this computer a year and change.  I couldn't do it via safe mode and Windows 7 Startup Repair won't work.  I was able to reimage the hard drive and I was about one hour and was some windows updates and it died again.  Now it wont let me reimage and in BIOS diagnostics I get an error injury messages that the hard drive has failed.  I think that the hard drive is dead, or the SATA connection is dead. I don't know what else to do.

  I read that the SATA ports some time fail over time on these motherboards.  I wonder if I can buy an SSD and SATA III PCI card and start from scratch.   I I'm OK to do on this system.  If fail built-in SATA ports that could solve my problem in the long term.

  Any advice?  My computer is down for the count.

  Hello

  First of all check the warranty status for your HP HPE - 570 t.  Some of the HP PC come with a one year warranty more.

  Secondly, almost everyone buys a PC using a credit card.  Check with your credit card company and see if your credit card covers electronics for an additional year beyond the warranty period.  Several credit card companies provide this coverage free of charge.

  Start your PC in diagnostics (f2) and run diagnostics.

• Backup Windows and Protection/restoration of the point system failed to create (Vista32 Ultimate).

  I noticed this problem a few days ago.  I don't know what could have caused the system to change behavior. The last good backup comes from 26/12/2010.  Protection system reports find no restore point on the disk (System), used for the creation of these previoiusly.

  After reviewing some of the other threads on this site describing similar problems, I tried some of their recommendations without success (e.g. restoration rotating on and outside, software disabling AV and security, clean the system with Malwarebytes [he found something called "Closetmaid" and deleted] and Prevx, run CheckDSK, run the System File Checker [which is not able to fix the Desktop.ini but nothing else I've seen]) , and, of course, punctuated by reboots.

  The behavior of the System Protection tool is it hangs at the opening for about 2 hours. or while displaying the message "searching for restore points.  Once completed, it lists the system drive and the external backup drive and no restore point (they were taken on the system drive).  The system drive is checked.  Select "Create" translates into another hit hour 2 or more, followed by nothing, either the error 81000101 - timeout.  Unchecking the system drive and clicking 'Apply' committed another shot of 2-3 hours, which finally ends.  However, the complete tool never leave once you click on 'OK '.

  Backups performed for 20 initial minutes indicating approximately 20% of step and then simply stroll.  Each progresses of appearance (after some previous attempt of sanitation) running at exactly the same progression bar position before the hanging.  After a few hours, the backup process error 8004230F.  All the normal things have been verified.  The backup volume has enough free space (and was CheckDSK'ed, as well as the volume of the system being backed up properly), volume shadow copy service is started and running and its dependent services, RPC and DCOM are launched and running.

  I noticed another suggests to fix vssui.dll in another thread (http://social.answers.microsoft.com/Forums/en-US/vistainstall/thread/9a7621ba-4cef-4264-a90c-87209e7e7d60) that I have not been able to apply and which is the re-registration of a series of dll, among them. I have no copy of vssui.dll on my system to record. It is listed under a Vista32 thread so I guess I should have it.

  Other problems reported in the execution of the dll Re-recordings suggest the thread above were:

  (1) "ole32.dll module was loaded but the call to DLLREgisterServer failed with error code 80070005.

  (2) ' module loaded but the call to DllInstall eventcls.dll failed with error code 8000FFFF.

  (3) "es.dll loaded module, but the entry point DllRegisterServer was not found."

  (4) 'module vssui.dll failed to load."  Please make sure that...

  The other steps were successful.

  I had this problem also (Win 7 Pro) on the new installation.  As others have said that it is through the VSS (Volume Shadow Service) feature be corrupted.

  In my case, it was because of software that included drivers for my motherboard.  There is a backup/restore utility which took control of the "false" Windows Restore and VSS feature & backup of MS of the system.

  Go to the system event log and sort through VSS.  Then search for errors on the VSS or the backup.  Is particularly important to look at the "Information" events that led to the error.  They are more revealing than the error itself real.  The error is misleading for me.  In any case, look in the Inbox details information for the process that was involved.  My bet is that you need a 3rd part/application that needs to be removed.

  I have fought with this problem for weeks and stumbled on the errant software.  I did not intentionally install it.  So look for software that could have been bundled with other applications or drivers.

  Good luck

  John

• UCS Manager - internal backup system failed [WSF: FAILURE]

  Hello

  I have UCS Manager Version 2.2 (1 c)

  I implemented the backup of the configuration via SCP and Im getting error.

  Destination is accessible from other computers in the same VLAN via WinSCP.

  I need help what exactly is causing that error in the UCS Manager and how to solve this problem.

  I tried to delete and add new functioning of the backup operation.

  Severity: critical
  [FWS: FAILURE]: internal system backup
  Type: WSF
  Cause: WSF-failed
  Code: F999723

  I'm waiting to activate fast playback.

  See you soon.

  Looking at the logs you posted there is an inconsistency in the algorithms between scp server and the ucs system. Server accepts the aes - ctr and ucs uses aes - cbc?
  Maybe try adding

  "The cipher aes128-ctr, aes192-ctr, aes256-ctr, aes128-cbc" to/etc/ssh/sshd_conf

• 5.03 update installation systems fails with "the wizard was interrupted.

  I have a W520 I've updated to 8.1 Win. I am trying to install the system update utility and InstallShield Wizard fails with:

  The completed InstallShield Wizard

  The wizard was interrupted before system update could be completely installed.

  Your system has not changed. To install this program at a later time, please run the installation again.

  Click Finish to exit the wizard.

  I searched for solutions in all directions and empties. This tells me usually there is something weird on my machine or I'm not looking for the right keywords.

  I restarted mode safe mode, and then it was able to install it.  However when I tried to run, I got an error that it must be Win 7 or later to run.   I checked the shortcut and he was placed to run in compatibility mode XP for some reason any kind I unchecked it and now it ran normally.  Problem solved, finally!  :-)

• Partition recovery system fails after the first start

  I just purchased and receive the laptop next: Pavilion DV7-6C95DX. I went through the Setup program and then created recovery DVD.

  After playing with him for a short period, I decided to try to restore to factory using the recovery partition and F11 State when starting.  This started the Recovery Manager, which (according to his Checklist), reformat the Windows partition, copy the files required and restored the file on the hard drive.  Then it prompted me to restart and complete the process, which I did.

  When starting, it reported that he immediately reported "Windows could not start...". "Status: 0xc000000f... a necessary device inaccessible."

  I pressed Enter to continue and the screen says "choose one to start operating system... "and he only gave me the option"[active EMS] Ramdisk Options"choose it brings back me to the previous screen and so on.

  So, I tried using the recovery media that I made earlier.  Who started Windows and Recovery Manager reported the following: "this computer does not support the system recovery media. You are not able to restore this computer with the media"there was a code below that read"0110-A6X02UAR #ABA - A6X02UA #ABA"

  Apparently, there are two problems - the reecovery partition does not work and the recovery media does not work.  I don't know if they are related, but in all cases, the computer is now unusable. It's less than a week.

  Thanks in advance for any advice to fix this.

  Hi Lance,.

  This error can occur if there are USB devices or media attached to your laptop cards.  If this is the case, remove all connected to your laptop then repeat the recovery process.

  If the above is not relevant, I would try the following to rule out a hardware problem.

  Before you try the following, make sure you can read the activation code on your label Windows COA (5 blocks of 5 alphanumeric games).

  Assuming that it's just a problem of software with the recovery process, it is a job before right around if you have (or can borrow) an installation disc Windows 7 at retail which is exactly the same version as your OEM installation - IE if your laptop comes with Windows 7 Home Premium 64-bit, it comes to version exact commercial that you would need.

  If you don't have access to a retail disk, you can create an installation disk yourself using another PC - just download the good Disk Image from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  Additional drivers, you may need to find from here.

  If this also fails to install Windows, I would simply return the laptop to the retailer, he bought at and get a replacement while you are still on time where it is an option.

  Kind regards

  DP - K

• Windows 7 backup disk Passport system - fails during the create a System Image

  error msg "the system cannot find the file specified" error code 0 x 80070002. Search code MS to remove update files - did not work. Close the anti-virus software, autoplay, etc... no luck. Backups on a WD "My Passport" are not after all MS updates beyond Windows 7 SP1. More info on Dell XPS 8500 is i5-3450 system and create the system image ends approximately 63% before failing. I also removed the Dell backup software after 5 unsuccessful attempts, still no progress.

  Hello Marilyn, Abd el Krim and everything,

  Here are my system specs, then I'll tell you what I found. I work with Dell XPS8500 Intel Core i5-3450 processor 3.1 GHz, 8 GB DDR3, 1 TB SATA HDD Windows 7 Home Premium 64 Bit memory. The system uses Intel 7 / C216 Chipset for Intel USB 3.0 eXtensible Host Controller and USB enhanced host controller.

  THE system BIOS is A06 and I updated the Intel eXtensible drivers to 1.0.5.235 as of 05/21/12.

  The system was manufactured 17/08/2012.

  My backup disk is Western Digital MyPassport external Drive USB 3.0 500 GB.

  I use Windows Back Up & Recovery routine not 3rd party software.

  I'm not not execution of recommendations of Abd el Krim when I found users of the Forum having the same problem as me.

  Using the ports USB 3.0 on the Dell gives Back Up is not "the system cannot find the file specified" error Code 0 x 80070002. After which, the AutoPlay routine appears. 57% using Dell before USB 3.0 ports annoys me all before the failure and the back gets USB 3.0 ports me 63% & 53% complete before the failure. Other Dell users encounter similar and different problems with the Intel / Dell USB 3.0 implementation (Ivy Bridge?).

  When I make Windows 7 to the top using the USB 2.0 ports, it completes successfully. WaHoo finally...

  So now, I believe that the problem is not with Windows 7 but the drivers Intel or Dell USB 3.0 application

  Thanks for your support! I look forward to responses, comments and other suggestions.

• system failed after install customer essbase on 11.1.2.3

  I did an install and config of 11.1.2.3 for essbase and planning

  After I run the go-ahead from diagnosis all the way

  I have install the EAS Client reboot the server and then everything fails

  Diagnosis

  Generated 08/31/2013 1 h 51

  Running on NextLevelServer of validation

  Build version: 11.1.2.3.0.8719

  The EPM System Diagnostics Info: 11.1.2.3.0 drop build 27 8414-on-03/21/2013 10:40

  Name of the operating system: Windows Server 2008 R2

  OS version: 6.1

  Location of the Instance of EPM system: C:\Oracle\Middleware\user_projects\epmsystem1

  Status Service Test Description duration of test

  Foundation of Hyperion

  Validation of audit FAILED that the audit has been initialized

  Error: Failed to execute of Checker.

  Recommended action: check the logs of validation for exception details.

  4 seconds

  Not a NOT THESE validate that CES has been initialized

  Error: Failed to execute of Checker.

  Recommended action: check the logs of validation for exception details.

  4 seconds

  WARNING CFG: Configuration validating this configuration tasks is completed

  EPMVLD-01004: the following configuration tasks have been completed:

  Configure the Web server: pending

  Configure the database: pending

  Configure: pending

  Configure common settings: pending

  Configure Oracle Configuration Manager: pending

  0 seconds

  Is NOT CSS validation CSS has already been initialized

  Error: Failed to execute of Checker.

  Recommended action: check the logs of validation for exception details.

  4 seconds

  FAILED EXT: Running the checker of external authentication failed.

  Error: EPMCSS-00000: failed to process the request. Internal server error. For related errors, see EMP Shared Services security log file.

  Recommended action: check the logs of validation for exception details.

  8 seconds

  HUB COULD not validate this HUB has been initialized

  Error: Failed to execute of Checker.

  Recommended action: check the logs of validation for exception details.

  4 seconds

  PAST WEB: Permissions HIT all entries are present in system-jazn-"Data.xml"

  0 seconds

  FAILURE of LCM validating this LCM has been initialized

  Error: Failed to execute of Checker.

  Recommended action: check the logs of validation for exception details.

  4 seconds

  FAILED to perform Single Sign-On check failed.

  Error: Failed to execute of Checker.

  Recommended action: check the logs of validation for exception details.

  2 seconds

  LNK FAILED: registry check that all the components in the registry have a link to the host

  Error: Failed to execute of Checker.

  Recommended action: check the logs of validation for exception details.

  0 seconds

  PAST CFG: Control environment if the system path variable length exceeds 2 000

  0 seconds

  REG failed: checking Configuration if the product has a single product in the registry node.

  Error: The SHARED_SERVICES_PRODUCT component was not found in the registry.

  Recommended action: try to re-config product.

  0 seconds

  Validation FAILURE registry that the registry has been initialized

  Error: Failed to execute of Checker.

  Recommended action: check the logs of validation for exception details.

  4 seconds

  Registration of EPM system

  Essbase / Essbase

  WARNING CFG: Configuration validating this configuration tasks is completed

  EPMVLD-01004: the following configuration tasks have been completed:

  Configure the Essbase server: pending

  Register with Shared Services: pending

  Configure: pending

  0 seconds

  REG failed: checking Configuration if the product has a single product in the registry node.

  Error: The ESSBASE_PRODUCT component was not found in the registry.

  Recommended action: try to re-config product.

  0 seconds

  Essbase / Essbase Administration Services

  WARNING CFG: Configuration validating this configuration tasks is completed

  EPMVLD-01004: the following configuration tasks have been completed:

  Configure the database: pending

  Register with Shared Services: pending

  Configure: pending

  0 seconds

  REG failed: checking Configuration if the product has a single product in the registry node.

  Error: The ESSBASE_ADMINISTRATION_SERVICES_PRODUCT component was not found in the registry.

  Recommended action: try to re-config product.

  0 seconds

  REG failed: checking Configuration if the product has a single product in the registry node.

  Error: The ESSBASE_PRODUCT component was not found in the registry.

  Recommended action: try to re-config product.

  0 seconds

  Essbase / Essbase Integration Services

  WARNING CFG: Configuration validating this configuration tasks is completed

  EPMVLD-01004: the following configuration tasks have been completed:

  Configure the Essbase Integration Services: pending

  Configure: pending

  0 seconds

  REG failed: checking Configuration if the product has a single product in the registry node.

  Error: The ESSBASE_INTEGRATION_SERVER_PRODUCT component was not found in the registry.

  Recommended action: try to re-config product.

  0 seconds

  REG failed: checking Configuration if the product has a single product in the registry node.

  Error: The ESSBASE_PRODUCT component was not found in the registry.

  Recommended action: try to re-config product.

  0 seconds

  Essbase / Essbase Studio

  WARNING CFG: Configuration validating this configuration tasks is completed

  EPMVLD-01004: the following configuration tasks have been completed:

  Configure the database: pending

  Register with Shared Services: pending

  Configure: pending

  0 seconds

  REG failed: checking Configuration if the product has a single product in the registry node.

  Error: The ESSBASE_STUDIO_PRODUCT component was not found in the registry.

  Recommended action: try to re-config product.

  0 seconds

  REG failed: checking Configuration if the product has a single product in the registry node.

  Error: The ESSBASE_PRODUCT component was not found in the registry.

  Recommended action: try to re-config product.

  0 seconds

  Essbase / service provider

  WARNING CFG: Configuration validating this configuration tasks is completed

  EPMVLD-01004: the following configuration tasks have been completed:

  Configure: pending

  0 seconds

  REG failed: checking Configuration if the product has a single product in the registry node.

  Error: The ESSBASE_PRODUCT component was not found in the registry.

  Recommended action: try to re-config product.

  0 seconds

  Foundation / calculation Manager

  WARNING CFG: Configuration validating this configuration tasks is completed

  EPMVLD-01004: the following configuration tasks have been completed:

  Configure the database: pending

  Register with Shared Services: pending

  Configure: pending

  0 seconds

  REG failed: checking Configuration if the product has a single product in the registry node.

  Error: The CALC_MANAGER_PRODUCT component was not found in the registry.

  Recommended action: try to re-config product.

  0 seconds

  Foundation / Performance Management architect

  ÉCHEC de lancement AppMgrLoadAdf vérificateur externe avec la commande suivante : C:\Oracle\Middleware\EPMSystem11R1\... \jdk160_35/bin/Java-DEPM_ORACLE_HOME = C:\Oracle\Middleware\EPMSystem11R1-DEPM_ORACLE_INSTANCE = C:\Oracle\Middleware\user_projects\epmsystem1-Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration-Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.appmanager.AppMgrLoadAdf

  Error: Failed to initialize AppMgrLoadAdf. Please check all the registry information are valid and HSS is running.

  Recommended action: make sure that the external auditor is working.

  11 seconds

  WARNING CFG: Configuration validating this configuration tasks is completed

  EPMVLD-01004: the following configuration tasks have been completed:

  Create the virtual directory EPMA: pending

  Configure the database: pending

  Register with Shared Services: pending

  Configure: pending

  0 seconds

  ÉCHEC de lancement DimEditorLoadAdf vérificateur externe avec la commande suivante : C:\Oracle\Middleware\EPMSystem11R1\... \jdk160_35/bin/Java-DEPM_ORACLE_HOME = C:\Oracle\Middleware\EPMSystem11R1-DEPM_ORACLE_INSTANCE = C:\Oracle\Middleware\user_projects\epmsystem1-Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration-Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.dimeditor.DimEditorLoadAdf

  Error: Failed to initialize DimEditorLoadAdf. Please check all the registry information are valid and HSS is running.

  Recommended action: make sure that the external auditor is working.

  12 seconds

  ÉCHEC de lancement EnumApplications vérificateur externe avec la commande suivante : C:\Oracle\Middleware\EPMSystem11R1\... \jdk160_35/bin/Java-DEPM_ORACLE_HOME = C:\Oracle\Middleware\EPMSystem11R1-DEPM_ORACLE_INSTANCE = C:\Oracle\Middleware\user_projects\epmsystem1-Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration-Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.repository.EnumApplications

  Error: Failed to initialize EnumApplications. Please check all the registry information are valid and HSS is running.

  Recommended action: make sure that the external auditor is working.

  11 seconds

  ÉCHEC de lancement EnumDataSyncs vérificateur externe avec la commande suivante : C:\Oracle\Middleware\EPMSystem11R1\... \jdk160_35/bin/Java-DEPM_ORACLE_HOME = C:\Oracle\Middleware\EPMSystem11R1-DEPM_ORACLE_INSTANCE = C:\Oracle\Middleware\user_projects\epmsystem1-Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration-Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.repository.EnumDataSyncs

  Error: Failed to initialize EnumDataSyncs. Please check all the registry information are valid and HSS is running.

  Recommended action: make sure that the external auditor is working.

  11 seconds

  ÉCHEC de lancement EnumDimensions vérificateur externe avec la commande suivante : C:\Oracle\Middleware\EPMSystem11R1\... \jdk160_35/bin/Java-DEPM_ORACLE_HOME = C:\Oracle\Middleware\EPMSystem11R1-DEPM_ORACLE_INSTANCE = C:\Oracle\Middleware\user_projects\epmsystem1-Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration-Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.dimeditor.EnumDimensions

  Error: Failed to initialize EnumDimensions. Please check all the registry information are valid and HSS is running.

  Recommended action: make sure that the external auditor is working.

  11 seconds

  FAILED PMAJ: EPMA validation if Service the jobmanager service is available.

  Error: EPMVLD-01006: EPMA service is not available. Check the logs for more details.

  Recommended action: make sure that the server is running.

  0 seconds

  DSC FAILED: Startup EPMA DimensionServer Server Configuration validation EPMA Dimension hyperion-bpma-server... Has no...

  Error: Server Dimension was not found in the registry of Shared Services.

  Recommended action: make sure the application is started.

  0 seconds

  REG failed: checking Configuration if the product has a single product in the registry node.

  Error: The EPMA_PRODUCT component was not found in the registry.

  Recommended action: try to re-config product.

  0 seconds

  Foundation / workspace

  CFG PAST: Configuration validating this configuration tasks is completed

  0 seconds

  REG failed: checking Configuration if the product has a single product in the registry node.

  Error: The component workspace is not found in the registry.

  Recommended action: try to re-config product.

  0 seconds

  PAST REG: Register all links are present in the registry.

  0 seconds

  Planning

  WARNING CFG: Configuration validating this configuration tasks is completed

  EPMVLD-01004: the following configuration tasks have been completed:

  Configure the database: pending

  Register with Shared Services: pending

  Configure: pending

  0 seconds

  REG failed: checking Configuration if the product has a single product in the registry node.

  Error: The PLANNING_PRODUCT component was not found in the registry.

  Recommended action: try to re-config product.

  0 seconds

  Test start time: 1:49 08/31/2013

  Test the end time: 1:51 08/31/2013

  Test duration: 102 seconds

  Please notify

  This is the second time that this takes place

  The database is configured on the same server?

  Have you checked database services are in place and after restarting the server, did you start services Hyperion?

  See you soon!

  SH! going

• The function init system failed, Uunixerr =: msgget: no such file or directory

  Windows Server 2008, Enterprise Edition
  tuxedo11GR1PS1
  
  
  When I run the command "tmboot-y", I got the following error information to the ULOG file:
  105806.RNO05045.us.Oracle.com! BBL.3536.5040.0: LIBTUX_CAT:681: ERROR: failed to create the message queue
  105806.RNO05045.us.Oracle.com! BBL.3536.5040.0: LIBTUX_CAT:248: ERROR: function init System failure, Uunixerr =: msgget: no such file or directory
  
  What is the problem? Someone help!

  Hello

  You seem to be with the team Oracle Tuxedo and lists of internal dissemination and discussion groups are probably a better way to solve internal issues to this external focus group.

  In any case, I think that their may be a tuxedo with internal debugging information generation and release a production version of the tuxedo even on this machine. Services of the IPC for the versions built with and without debugging are not compatible between them and a version cannot create the IPC resources when the IPC for the other build service is running.

  Ed

• Update the system failed cannot start phone

  I started earlier today to the update of the system and haven't noticed that my battery was really low. It seems that the battery runs out during the update process. Is that a way to every factory reset the phone or install update. I use the phone of Keon

  Looks like that the phone does not receive enough power to the wall socket. I plugged it to my computer USB and it started immediately - on OS and all seems OK