European PowerBrick + US extension cable

Similar Questions

• min displayport - UK extension cable

  Hi guys,.

  I need a cable Extension Mini DisplayPort for my Mac Pro 2009 and Cinema Display 24 "so I can move my turn more away from the screen.

  Can someone please recommend a good cable to the United Kingdom as Apple do not have their own extension cable.

  Thank you

  I haven't used one of these types of extension cables, but found that-

  https://www.Amazon.co.UK/NEET®-DisplayPort-Extension-female-display/dp/B002SL34U 2.

• Power adapter extension cable

  Hello.

  Surfing on the Apple Online Store, I saw the "power adapter cable extension.

  So my question is: is this the same cord included in the iMac product? Or I can use it as a normal power cord instead of the original?

  Thank you

  is this the same power cord included in the iMac product?

  No it's a specific connector for a MacBook power adapter

  I can use it as a normal power cord instead of the original?

  No, it is used to connect to a MacBook power adapter, into a socket with a cable

  connected directly to the wall outlet:

  

  connected using power extension cable:

  

• Effect on correction of the CJC to use copper instead of type thermocouple extension cables

  Hello people. It is is a kind of "phenomenological" question, lumping together a bunch of real problems. Type of hope that someone had experience try this and can give me an advice.

  I'm looking to make measurements of temperature relatively high speed with very fine wire of type K or N thermocouples.

  I will be very many TC - about 75 in quantity and therefore will be, if it works well enough, wire the asymmetrical (I trading accuracy for amount in light of the SCB-two 68).

  My complete data acquisition system is:

  Computer PXI

  PXI-6225

  (Qty 2) SCB-68

  QUESTION 1: Any recommendations in the configuration of these two NRSE or GRSE? The device, I am close to (but not electrically in contact with) is completely without merit (experience of combustion). TC fine wire is indeed very thin, and their not armoured lengths will be about 12 ". There is no significant EMF/EMI around my experience. I will experiment but just wanted to know if anyone can rule something here...

  QUESTION 2:

  Important points:

  • I want to use type N for additional above K to my temperature range and also because that N-type are available in smaller caliber (0.003 ") and stability welded end to end.
  • Unfortunately, I n ' t has a bunch of N type connectors - if I have to use/buy the N type connectors this is a significant cost (see the stop).
  • My Setup has the TC in the physical location of 'groups' of 7. Given the asymmetric configuration, I have 7 anodes and 1 single "reason" for each "group" - for a set of 8 wires out of each "group".
  • I need to connect on the order of 80-wire in both SCB-68. I try to minimize the number of threads that I have to deal with.
  • Omega does not sell single conductor wire anode and cathode for the N-type as they do for K-type. They sell only duplex son.
  • Omega is also not sell armored bundles of type N, as they do in K-type
  • If I use type N TC and I use the real N type extension wire, it will have to be duplex (because of two previous points) - it's something like 80 PAIRS of wiring, with one of the sons of the cathode on most of the wires not used (because of the asymmetrical configuration).

  It seems that I must consider the following compromise:

  Use the TC type desired N and treat approximately 80 pairs of duplex wire extension of type N OR less desired TC type K and purchase grouped, shielded wiring to minimize the mess of wiring GOLD copper use extension (WHAT?)...

  Yes! Why can't I use the copper wire extension to the fine N TC of the cable type and connect to the TC with a kind of nonmetallic connector (like screws nylon) or solder? The attraction here is that I could use the signal wire 8 drivers together, to each of my TC 'groups '. This would reduce and clean my wiring and not need to buy all type N connectors (TC would be wired, no connector involved).

  It seems to me that I could simply set up the cold welding (CSF) on board the SCB-68 fixed to work on N-type. Copper wire would result of the SCB-68 the TC type N. No metal connectors would participate. Thusly, being only one junctions P/OMEGA-copper and copper/OMEGA-N to deal with the CCM. This sounds like it would be exactly the same as a N-type wiring directly into the SCB-68, except that there may be error between the temperature reading to the CJCS and the junction of alloy copper/OMEGA real. This won't be a significant error because the two locations will be very close in temperature.

  If this "mistake" of temperature becomes a concern I can mount a TC that is unique to the copper/TC junction and make my own corrections (I think...)

  Here is a little schematic text (without taking into account all shunt connections in the CSR circuits...):

  Any circuit anode/channel: SCB-68 Terminal-> extension copper-> (direct connection via the non-metallic connector) OMEGA-P of the N type TC

  Common ground circuit/channel: SCB-68 Terminal-> extension copper-> (direct connection via the non-metallic connector) OMEGA-N to the N type TC

  This idea implies that the circuit board within the SCB-68 has copper conductors, such as the addition of copper extension wire would not create an additional junction.

  Anyone tried this? Can someone offer me some ideas?

  THANK YOU in advance!

  -Dan

  ddml wrote:

  Henrik-

  Thanks for the very useful reply. Yes, I forgot to mention that the lengths of wire extension will be the order of 1 m, then resistance extension must be low, even if common ground is used as part of an arrangement of asymmetrical circuit.

  ...

  Here's my last logic!

  • If my experience shows that the single-ended NRSE GRSE arrangement response or "match" the differential response conservative, I will choose asymmetric for more sampling points.
  • Since I know the extension wire / TC to the ASE will be nearly isothermal with the CBS itself, I would like to use the extensions of copper and accept (and possibly correct?) the error based on the temperature. I would like to use threads, as this I need 7 + and 1 ground by grouping of 7 TC to my DUT (Recalling)-> http://www.newark.com/jsp/content/printCatalog.jsp?cat=c127&page=1199&display=zoom
  • If during the examination of the previous point, I find that copper extensions are NOT practical and I need to use tank extensions of TC-metal all the way, then I choose a TC type K on an N-type. The reason is that there are many more options for tanks, bundled extension cable type K (N-type is apparently a sort of new and not very popular). However if copper extensions are possible, then I'll use the TC type N, motivated by their superior high temperature oxidizing atmosphere stability and the fact that I can get them in a configuration welded end to end to 0.003 "caliber!

  If none of this logic seems faulty or unrealistic, I would appreciate it really more input! I don't know that it will be a lot of work!

  Thank you once again,

  -Dan

  Dan,

  I've marked the important phrase what you're actually doing is moving the CCM of the CBS for the TC/copper connection. Any difference in temperature will directly add to the error.

  However, don't try to save the copper with your approach to 7 + 1, ask IT for another 12 m Ethernetcable guys more and go with 7 * 2 + 1 pair of reserve and make the summary at or near the CBS. IF you need a differntial measument system later, you need to rebuild all connections. (And not just add a new cable for all conical fittings, it is the twisted pair that makes the magic Yes, same vor 1 m!) Remember that you are dealing with µV! And since you want to quick reads without filter a lot of way, do not try to save $10 to about 12 m of cable. Somehow I have the feeling that you try you anyway

• Microphone C20 length Max extension cable

  Nice day

  I would like to know if it will be possible to extend the standard microphone C20 cable last 15 m...

  Thank you!

  Hey Martin

  We can use the extension for the microphones to C20. Even its listed in the parts and components Guide:

  CTS-QSC20-MIC =

  20 and 7.5 m of performance Mic cable attached

  CAB-MIC20-EXT =

  Extension cable 10 m for CTS-QSC20-MIC, 3.5 mm F 3.5 mm M

  So we can say that you can use the microphone with 2 extension = 37.5 meters, a little more of 90 feet.

  Thank you

  Rafal

• Installation of the USB 2.0 extension cable failure, and I am on Windows 7.

  I recently bought a foot 6 ' Male/female' USB extension cable, and it's USB 2.0.
  I bought it because my headphones would not properly work because of a problem in my computer and I thought that an extension can help to stop this problem.
  So, I try to install, but it never does.
  Does anyone know why there are installation problems?
  Also, Yes, the helmet works if I plug it directly on the computer, but with some errors.

  Hi guy,

  I understand that the USB 2.0 extension cable does not work on your computer.

  1. What is Gets the error message when you connect the headphones to the computer?
  2 have you tried plugging the USB cable into another computer?
  3. have you tried it with different USB ports?
  4. What is the brand and model of the computer and a USB headset?
  5. did you of recent changes to the computer?

  Extension cable does not need a driver, this is just a thread. USB cables come in varying degrees of quality. The length of the cable can also be important, because the voltage of the equipment can be reduced by the resistance of the cable. Some devices specify 6 feet or less while others may work correctly with 12 people or more.

  I would suggest trying the following steps and check if it helps.

  Method 1:

  I suggest to run the hardware and devices Troubleshooter and check if it helps.

  Open the hardware and devices Troubleshooter

  
  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  I suggest to open a session on the helmet manufacturer's Web site and install the latest drivers for the headset, if the problem persists.

  You can also check the USB device drivers updated using windows update. See below the help link

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the edge of the question persists I'll ask allows you to check the chipset driver updates you find on the manufacturer's website. The chipset drivers normally integrate USB controller drivers as well.

  For more information:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  It will be useful.

  For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• C20 QuickSet camera Extension Cable

  Hi - did someone knows if it is possible to extend the length of the camera on a quick set C20 cable please?

  I wonder if it is possible in a manner similar to the MXP used solution of extension cables 3 x 6, 5 m more power... as well as a HDMI cable block extended, so maybe?

  Kind regards
  Richard

  I do not know the length, but the PrecisionHDMC camera Guide may contain requirements.  I know that HDMI has a maximum length, although I don't know if the cable has a VISCA since it's just power/control.  You could also connect to independent power of the camera, so all you have to focus on command.  The guide also contains the pinout you are looking for as well.

  http://www.Cisco.com/en/us/docs/Telepresence/endpoint/camera/precisionhd/user_guide/precisionhd_1080p-720p_camera_user_guide.PDF

• Extension cable VGA resolution problems

  Pavilion 6507c with a monitor HP 2010, Windows 7 64 bit.  I'm trying to separate the CPU and the monitor by a few feet more that allows the original VGA cable 6 '.  Have tried a more original extension and also one long cable. With something else that the short original cable, the computer no longer recognizes the monitor - it shows as generic non - PnP and will not 1600:900, so the image is stretched. Re-installed 2010 drivers - happens always generic.

  Is it possible to extend the monitor distance without sacrificing the correct resolution?

  I wouldn't be too concerned getting message no signal when the PC is shut down down.  With a longer cable, the signal can degrade more quickly causing the no signal message during the shutdown process.

  Displays work by the monitor by sending EDID for the PC and this information is part of how the PC identifies what resolutions are available for this monitor.  The original cable allows this information to be sent from the monitor to the PC.  The PC then keeps this information which is what allows to operate with the longer cable after swap cable VGA 6' for a longer or extended.  Once the system is shut down, the EDID information is lost.  That is why it does not work once the system is stopped and started with a prolonged or long cable.

  You mentioned a significant difference between cables: the absence of a ferrite core.  This entry from Wikipedia explains ferrites (aka: ferrite core) and what use they have.  Essentially, it reduces the level of interference which could cause the loss before reaching the PC of the EDID information.  This is more noticeable when you use a long cable, so this could be due to the lack of nucleus of ferrite.  However, the adapter indicated in my previous post should correct the problem of resolution (However, it would still be listed as a generic PnP monitor).

  I would weigh the cost of a cable with core of ferrite against the cost of obtaining an EDID emulator and select the cheapest option.  I know an EDID emulator will rectify this issue, but I can't say that making a cable with ferrite core will fix this problem with 100% certainty.  I do not know have a ferrite core may cause problems of signal quality.  If you can still exchange the cables, then that may be the least expensive option.

  Let me know what happens.

• New Firmware Canon (1.1.3) on Canon 5 d Mk III leads to problems with the USB Active extension cable

  At first I thought it was new version of Capture One Pro 7 or and the last update of OS X 10.8.3, but the camera is no longer connects to Windows 7 with a Capture One Pro 6.4.4 or 7.1.1. And this is always related to Windows 7. When I used a regular usb cable without the Extender everything has worked on computers and two software platforms.

  Please fix asap Canon and don't blame someone else cause this is without a doubt you do!

  You are right. After trying new camera on pc and mac, we tried a friends 5 d mkiii with the extension and it works. So, after spending several hours on it, I think it's the camera itself.

• HELP WITH LINKSYS WUSB100 attached to the USB EXTENSION CABLE - does not work

  Hello team,

  I own a LINKSYS WUSB100 usb adapter I used for my wifes desktop... I can connect to my home network to surf the net, but the signal is weak...  I decided to buy a 25' EXTNESION USB CABLE, which comes with a MALE AND FEMALE ends... I simply PLUGGED the cable on my DESK and PLUG the other end of the USB cable from the LINKSYS WUSB100 card and waiting for the COMPUTER TO RECOGNIZE the card without any problems... To MY SURPRISE, the computer would not have hired the LINKSYS CARD... He said "the search for new deivce, peripheral found but not hired"(Something like that)... in any case the desktype sees the device, but willl not hired there as a LINKSYS and I cannot search FRO all networks... As soon as I unplug the LINKSYS of the cable and plug it into the USB port of the computer - BAM my network comes up with a weak signal... Can anyone understand this? My cable is too long?

  Thanks a lot for all inpiut!

  DOn

  dax0007 at hotmail

  There is a standard length for the cable. It will not work with 20 foot extension... Try the cable up to 3-4 feet short and check.

• LAP1522 antenna extension cable

  Hello

  I need to install LAP1522 inside and outside ANT5180V-R. Can I use the AIR-CAB010LL-N cable for this purpose for a 3mts extension? Wanted to confirm if this cable in fact has N-type connector and can be used with LAP1522.

  concerning

  Joe

  Joe,

  That should work fine.  According to http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/product_data_sheet09186a008022b11b.html , this cable has a "N" of 90 degrees and a right type connector "N".

  See you soon,.
  Steve

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• Portege R100 video cable does not reach the replacement LCD screen

  Hi guys, I have replaced the LCD screen of my Toshiba R100, than they had in it was defective. It seemed that it was a replacement at some point however. In any case, I received my new screen, but does not reach the video cable to the top of the circuit of LCD screens. How am I meant to connect it to the screen? Is there an extension cable or what? The screen they had in there previously looked like they were welded copper wires about 8 digitizer.

  Here are 2 pictures of what I mean

  

  

  Hello

  Where did you buy this screen?
  Are you sure that it is perfectly compatible with your laptop protected R100 to 100%?

  Looks like it s not fully compatible
  However, if an extra cable is necessary you can get it from the Toshiba ASP in your country.

  In your case, I recommend you contact the guy and ask for compatible cable!

  Welcome them

• Alternative HDD/SSD cable connection?

  Recently, I made a post here who need both a caddy and an extension cable for my laptop HP Pavilion 4180-United States.

  I got answers for everything that I need, but for the cable, he says that he is-22 units in stock and will not ship new orders until the end of February.

  http://h30434.www3.HP.com/T5/notebook-hardware/Pavilion-4180us-SSD-Caddy/m-p/1218837#M63893

  Could someone help me please to find an alternative to this cable, much obliged.

  I had a quick glance through your other thread and your cable and hard drive caddy will work for the new SSD. If you want to use your old hard drive you can simply connect through a hard disk USB storage enclosure.

  http://www.vantecusa.com/front/product/view_detail/272

  If you need a cable for the second hard drive Bay, NewmodeUS has in stock, but you must buy the caddy too.

  The entire thread is kind of confusion about what you are really after.

  http://www.newmodeus.com/shop/index.php?Main_Page=product_info&products_id=345

  Here is one of NewmodeUS.

  If you buy your Crucial SSD, they have a kit to transfer your operating system on the new drive. There are several ways to move the operating system or preferably a clean install on your new drive and then you can simply transfer your personal affairs on the use of the external hard drive caddy.

• Cable passive to connect the FET - 40 G and FET - 10 G

  Hello

  I'll get right to the subject. The Cisco Nexus 2348TQ have an affair rising SKU N2K-F40G-F10G option, which consists of the following:

  TRANSMITTER-RECEIVER 2xFET - 40G (with DFO-12 connector)

  TRANSMITTER-RECEIVER 8xFET - 10G (with LC connector)

  Maybe we could assume that there should be two "male 1xMPO12 > female 4xLC" passive extension cable included in the package, but the tricky part is that there is no included cable, and I am unable to find any mentions of these objects being available to Cisco.

  The question itself is if the cisco have these available passive extension cables and if yes - what are their credentials?

  Halp? Please? It makes me crazy already...

  Yes, that's correct.

• Power outage while resetting the iMac for sale

  Hello

  Because I sell my iMac mid-2010 I got it running overnight on an extension (from my room that my office is not sufficiently taken to run my current mac and my old). When I left it, it was the third of the seven scratching (disk/Festplattendienstprogramm utility). I woke up to find that my husband had disconnected the extension cable because he blocked the door of the room to close completely.

  Now, I don't know how much data was actually well cleared. I rebooted the computer, looked at the disk utility and to see that at least the image of the old drive is missing. Therefore, the option of re-purge of disk utility is also missing.

  Because I don't know who will be the new owner I would be sure that my data is eradicated safely.

  Should I just get the Mavericks back and restart disk erasure utility? If this does not work, how I firmly erase any flying over possibly data? Thank you.

  FWIW, the average person would not have the capacity for

  recover data from even a single pass.  Unless you are rich enough

  or a member of a group special Government (NSA, FBI, military, etc.).

  I doubt if anyone would really have a desire to target.