Alternative HDD/SSD cable connection?

Similar Questions

• Satellite U940-100 - replace the HDD SSD

  Hello

  I want to change my Sat U940-100 by a SSD HARD drive.
  I can make a perfect copy but when I change the HDD SSD won't.
  Can someone explain me what I have to do?

  I think it has to do with het SSD of 32 GB, which is already inside?
  What I have to change something in the BIOS?

  Thanks in advance

  Dag

  What do you mean it won't? What did you do exactly?

  In my opinion after Exchange of HDD with SSD, you must install the original recovery image and start using your laptop with the 'settings '.

• Re: Satellite U500-1 DR-error on Toshiba HDD/SSD Alert

  Dear,

  I get the below error on Toshiba HDD/SSD Alert:

  "Unable to get the information from the disk, cannot use the alert function.

  I uninstalled and reinstalled Toshiba HDD/SSD Alert, but nothing has changed.
  My laptop is satellie U500-1 DR and the operating system is windows 7 (64-bit)

  Thanks in advance

  To be honest this message is not to me clear that the same tool works on my machine.

  Try to reinstall the Toshiba Value added package.

  Are you using the original recovery image Toshiba (operating system) that you got with your laptop?

• HDD/SSD location second free Qosmio X 70 - B?

  I want to buy a new laptop series Qosmio X 70 - B.
  but I have a question about the equipment of the Qosmio laptop...
  Namely,

  It is a second free (EMPTY) 2.5 inch HDD/SSD slot inside the laptop to assemble the second HARD drive?

  X 70 series - Had second free HARD drive location... but this new thinner than a series B series... I think that this series B may not...

  I think that the Qosmio X 70 - B is peripheral different.
  Its similar to Satellite L70 - B or Satellite S70 - B series and my knowledge the second HDD slot isn't taken in charge.

• Qosmio X 770 - 13F - can I built it second internal HDD/SSD?

  Hello from the snowy mountains of Savoie!

  My computer is a Qosmio X 770 - 13F.

  I am disappointed because it runs very slowly (I have the 'windows 7 explore bar green problem'...)
  I expanded the 8 GB RAM: no change to the actual speed.

  In this computer, there is only one hard drive (750 GB, 5400 RPM).
  The evaluation of access disk hard windows is only 5.9!

  There is an empty place next to the hard drive, so I wonder if it is possible or not to add a second internal hard drive or even an SSD.

  I searched for this user manual: no answer!
  And on the web, I have also not found response.
  Perhaps on this forum?

  Thank you and I apologize for my 'English amateur' (I'm french!)
  Jerome.

  In General, it is not easy to discuss the performance of the laptop. All of us use notebook with a specific setup and preinstalled applications that can run in the background and slowing down the reaction of notebooks.

  All I can say is that you must check the OS configuration and disable some unnecessary applications to start with Windows. Also disable the Windows automatic update installation. This can also slow down cell phone operations.

  HDD/SSD
  I n t have this laptop Qosmio but it will be interesting to follow: when you remove the cover and check empty place is available HDD/SSD connector or not?

• Equium M70 LAN adapter - it tells me to check the cable connections.

  When I connect a cable to the LAN adapter to the back of the laptop, how can the status LEDs should he show.
  I have only one view. Does that mean I have a problem.
  I am trying to connect to my ISP using an ethernet cable. He always says check cable connections.

  Near the port of LAN, there are two LEDs available: orange and green. When the LAN cable is OK and connection is where the Green led is permanent. The orange LED blinks when data transfer is available. Please check it carefully.

  If the Green LED is not on after connecting the cable LAN there are three possibilities:
  The LAN cable is defective
  Your router settings are bad (MAC settings or IP address)
  Or in the worst cases the LAN card on your laptop is defective (check in the Device Manager)

• Re: Qosmio X 300 - 11W - HDD/SSD Alert driver problem

  I'm trying to install the driver HDD/SSD Alert and get message 'unsupported machine.

  Hello

  Can you please tell us what OS you are using?
  Have you installed all other Toshiba tools and utilities?

• Portege R700: HDD/SSD Alert "cannot get disk information.

  The Toshiba HDD/SSD Alert keeps popping up on my Portege R700. It gives the message "failed to get disk information, cannot use the alert function.

  The OS is Windows 7 32 bit. Everything else works well.

  I tried uninstalling and reinstalling the HDD/SSD Alert cmdlet and the Intel Rapid Storage driver, but none of the measures have worked.

  Someone at - it ideas?

  Thank you

  Try this:

  Remove the application HDD/SSD Alert Control Panel-> programs and features
  Remove the Toshiba Value added Package Panel-> programs and features application
  Reset
  Download and install the latest Package of added value on the Toshiba site
  Download and install the latest HDD/SSD Alert on the Toshiba site

  Otherwise, it would be possible that the problem is related to the HARD drive maybe that alert the program HARD drive cannot read the info of the disk due to HARD drive hardware problem.

• TOSHIBA HDD/SSD Alert - do I need if I have my laptop on a desk?

  Hello all, I guess my question is not on the HARD drive or the hardware itself, its subject the load or the process CPU usage alert hdd in my laptop. Fact it gives a heavy load for my memory?
  Someone at - he noticed your laptop to be a bit slower when this option is enabled?
  I know it's protection for my HARD drive, I understand that was a time when my laptop falls or is hit, the hard disk will fail and my HDD is damaged.
  But how useful this app if I have my laptop on a desk all the time without danger?

  Do you advise me to turn it off?

  In general the TOSHIBA HDD/SSD Alert function must monitor the operating status of HARD drive and run the backup of the system. It is very useful, but certainly not so important, tool that must run all the time. It runs in the background, does not use the resources so and in fact there is no reason to stop it, only if you want.

  That recommend you?
  In my opinion you should let it run. I have the Satellite P500 and it works all the time. I t n t n stop and I noticed a few performance bad/slow more laptop because of this.

• Questions about SPDIF cable, connection, configuration on Qosmio G20

  I would use my QOSMIO in my home theater equipment. But I don't know how to use the SPDIF output. This output is common with analog headset, so I think I should do a this port configuration (software)...
  My questions are:
  -Should what type of cable/connection I use?
  -How the correct configuration of this output to get the digital sound signal?

  Thank you for your advice.

  Hello

  Well, the S/PDIF Jack allows you to connect digital speakers or stereo headphones (minimum of 16 ohms). When you connect a digital speaker or the headphones the internal speakers is automatically disabled.

  Please visit this link. You will find the cable that you can use:
  http://www.impactacoustics.com/categories.asp?cat%5Fid=900

  Useful information on a S/PDIF cables and technology:
  http://www.epanorama.NET/documents/audio/SPDIF.html
  http://www.interfacebus.com/SPDIF_Audio_Interface.html

  Good bye

• replace the HDD SSD

  Dear Sir.

  I want to know how I can replace my HDD SSD

  I have MacBook Pro mid 2012 500 GB I want to change my HARD drive 500 GB

  Can you please guide?

  Kind regards

  Saqib Sallahuddin

  Click here for more information.

  (139267)

• Satellite L655D-011-HDD/SSD Alert, HARD drive failure?

  I have an old L655D-011 of 6 months and yesterday it started to appear with the message to back up my files because there is a problem with my HARD drive. Well, after having a technical support in the past, I don't give that easily and simply run my laptop to the nearest authorized service center. Instead, I help out.

  I did the BIOS update finally. No change in question.
  Finally had time to create a recovery media. No problem with that at all.
  I reformatted. No change in question.
  Checked the health monitor. It shows that my HARD drive is "good". Yet, when I double-click the icon, I get a pop - up with the following message:

  "Toshiba HDD/SSD Alert."

  Disk0

  Your HARD drive is SMART failure to predict which monitors the status of operation of the HARD drive. Your HARD drive is facing a problem and CHIP controlling the software predicts that the HARD drive will fail. Toshiba strongly recommends that you create a back-up to the date of your HARD drive. Contact an authorized service provider to check your drive and buy a new replacement if necessary. »

  So, after that I decided to run a CHKDSK /f /r. Result: 'windows replaced bad clusters in file name \hiberfil.sys 44990.'

  I should be good to go, right? N ° same problem with the precaution of backing up my files.

  But this isn't good, is it? If my HARD drive is about to fail why monitor health show that everything is "good"? There is no problem with gel, pxe.boot errors, rattling disc, unusual vibrations or read/write failures.

  So, my questions (after all the above and see other threads to ask questions about HARD drive failure messages) are: were there any known issues where the SMART software does not work correctly? Are failure drives hard all from the same manufacturer (I've seen this happen - get a bad batch of a single manufacturer HARD drive)? The health monitor working correctly?

  In my opinion your questions cannot be answered simply.
  > Are there any known issues where the SMART software does not work correctly?
  How many people must confirm that they have the same problem? I guess this happens from time to time, but you cannot say that this problem is known.
  You will always find people who noticed the same issue and not on Toshiba forum only, but on all the forums where people discuss cell phones in general.
  > Is the disk failure hard all from the same manufacturer (I've seen this happen - get a bad batch of a single manufacturer HARD drive)?
  How to check or confirm this?

  You know, during the first backup all your important data, watch carefully what happens the next few days. If the info appears again and again, contact the nearest service Toshiba and let them Exchange the HARD drive.
  The guarantee is valid and it will be free of charge.

• my hybrid HDD/SSD drive does not work with my new Y50

  my hybrid HDD/SSD drive does not work with my new Y50

  Help!

  Hi YouMaCry,

  You have any records? or a USB recovery?

  If you cannot install an OS on your SSHD your SSHD can be defective, because it is reading it is cluster/bad sectors. A defective HDD/SSD/SSHD can still be detected (sometimes even when it is defective).

  To be sure contact Lenovo Support Center and ask them to send you your SSHD/unit in a get fully tested Lenovo the SSHD repair depot - and have defective parts repaired within a reasonable time!

  See you soon

• HP laptop: unable to identify the lan cable connection

  Microsoft Windows [Version 6.3.9600]
  (c) Microsoft Corporation, 2013. All rights reserved.

  Rodriguez C:\Users\anshu > ipconfig/all

  Windows IP configuration

  Name of the host...: fadiga
  Primary Dns suffix...:
  Node... type: mixed
  Active... IP routing: No.
  Active... proxy WINS: No.
  ... DNS suffix search list: Working Group

  Ethernet connection to the Bluetooth 2 network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Device Bluetooth (personal area network)
  #2
  Physical address.... : B0-10-41-80-AF-1E
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Local Area Connection wireless LAN adapter * 5:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Hosted network virtual card
  Physical address.... : B0-10-41-80-AF-1E
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Local Area Connection wireless LAN adapter * 2:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Wi - Fi Direct virtual card
  Physical address.... : B0-10-41-80-AF-1F
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Wi - Fi wireless LAN adapter:

  The connection-specific DNS suffix. : Working Group
  ... Description: RT3290 Ralink 802.11bgn wireless adapter
  Physical address.... : B0-10-41-80-AF-1D
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::e809:c01a:618f:7b5a %4 (Preferred)
  IPv4 address...: 192.16.137.4 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: Saturday, June 11, 2016 08:56:13
  End of the lease...: Wednesday, June 15, 2016 12:56:15
  ... Default gateway. : 192.16.137.1.
  DHCP server...: 192.16.137.1.
  DHCPv6 IOOKING...: 78647361
  DHCPv6 DUID customer...: 00-01-00-01-1C-FA-E4-80-14-58-D0-C5-74-1D

  DNS servers...: 10.10.2.2.
  192.16.137.1
  NetBIOS over TCP/IP...: enabled

  Ethernet Ethernet adapter:

  The connection-specific DNS suffix. :
  Description...: Realtek PCIe FE Family Controller
  Physical address.... : 14-58-D0-C5-74-1D
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::3070:15bf:b1ee:daab %3 (Preferred)
  Autoconfiguration IPv4 address. . : 169.254.218.171 (Preferred)
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :
  DHCPv6 IOOKING...: 51665104
  DHCPv6 DUID customer...: 00-01-00-01-1C-FA-E4-80-14-58-D0-C5-74-1D

  DNS servers: fec0:0:0:ffff:1 1%
  FEC0:0:0:FFFF:2 1%
  FEC0:0:0:FFFF:3 1%
  NetBIOS over TCP/IP...: enabled

  Card tunnel Teredo Tunneling Pseudo-Interface:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card adapt 6TO4 tunnel:

  The connection-specific DNS suffix. : Working Group
  ... Description: Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2002:c010:8904:c010:8904 (Preferred)
  ... Default gateway. :
  DHCPv6 IOOKING...: 704643072
  DHCPv6 DUID customer...: 00-01-00-01-1C-FA-E4-80-14-58-D0-C5-74-1D

  DNS servers...: 10.10.2.2.
  192.16.137.1
  NetBIOS over TCP/IP...: disabled

  Tunnel adapter ISATAP.workgroup:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. : Working Group
  ... Description: Adapter Microsoft ISATAP #5
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Tunnel adapter isatap. {74914F29-E819-4DEB-8CC2-D37CBFD70F3B}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Adapter Microsoft ISATAP #6
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Rodriguez C:\Users\anshu >

  On the lan cable connection, it says as unidentified network.

  That's what I have to type the command ipconfig/all.  I tried to reinstall drivers recvoery as Manager, but no results. It worked without problem until now

  @anshu645

  Home networks typically use a form any of 192.168.x.x

  For example:

  192.168.1.14

  Found in your example:

  192.16. 137.1

  Also found:

  Autoconfiguration IPv4 address. . : 169.254.218.171

  +++++++++++++++++++++++++++++++++++++++++++++

  I suspect that the installer with your home network router is misconfigured and the network can't find a viable (useful) DNS address to use for the purpose of ISP Internet Service (ISP) connection.

  Please see the following:

  HP PC - troubleshooting wired home networks (Windows 8)

  HP PC - Troubleshooting wireless network and Internet (Windows 8)

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• Error starting: "check the cable connection.

  Original title: that check the connection of the cable during the start up to the average?

  When I boot my computer says check cable connection? my computer crashed and has messed with it when you start to get in the system until I restored the computer to its original state. help I don't want to go through this again

  Hello

  ·          What version of the operating system is running on your computer?

  ·          Where there are changes made to your computer before this problem?

  ·          Question took place even after the computer has been restored to its original state?

  ·          It's a laptop or a desktop computer?

  This happens usually when the physical connection to the computer is not intact. Make sure that the physical connections are correctly configured.