Even after running in safe mode, Firefox is too slow, why?

Similar Questions

• Except if it is started in safe mode, Firefox is very slow; keyboard, mouse, etc.

  When you start Firefox normally the keyboard and mouse input is very slow. The videos are restless with her interruption. Scrolling is almost impossible. When you start in safe mode, Firefox works fine. Internet Explorer works well as Thunderbird. Have
  tried to update Firefox and disabling modules.

  Hello Paulkh, please disable graphics hardware acceleration.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  1. Open the Firefox Options tab as follows, click on the menu button

     

     and select ' Options.
     

  2. In the Options of Firefox tab, click the Advanced tab, and then select general.
  3. You will find in the list of parameters, the checkbox use hardware acceleration when available . Uncheck this box.
  4. Now restart Firefox and see if the problems persist.

  This solve your problems? Please report to us!

  Thank you.

• Angry Birds do not work on windows 8 even after running in compatibility mode.

  It works before on 7

  Hello Prashant_992,

  There is an angry birds App on the App Store in Windows 8. You can't use the one that is available on the internet.

  I hope this helps with your question.

  Thank you

  Marilyn

• window repair virus won't let me not even run in safe mode system restore.

  original title: window repair virus won't let me not even run in safe mode system restore.  What should I do now?

  Research on the web.  Not far from the computer.  Computer is speaking.  Windows repair itself downloaded to my computer XP Prof  Apparently erased all programs, all about office except explore and recycle bin.  Computer restarted in safe mode to do a system restore to an earlier date to wipe clear out of the memory of the computer.  Has started the system restore, you click on a date, click, hourglass and then nothing.  No message, nothing.  Click Next again and still nothing.  Download Security Essentials.  Took several attempts so that it can be updated.  Computer turns off.  EU Security Essentials uninstall and reinstall.  Finally updated.  I hope this works!

  Hi, John. I had to deal with this virus of the Windows repair. I have had pretty good luck (fingers crossed anyway) by using the removal guide posted on bleepingcomputer.com.

  http://www.bleepingcomputer.com/virus-removal/remove-Windows-repair

  They have a program called rkill download that stops all the running processes. Allows you to prevent the virus from Windows repair. It will give you a file log and show you things that stop you. Write those down.

  I had the same problem you had with not be able to update Malwarebytes. I would like to run rkill, run Malwarebytes, and then reboot and repair Windows would jump to the top. On the third try, I didn't restart after running rkill and Malwarebytes. Instead, I searched for the files that rkill to stop (and I wrote down) and remove them manually from the C drive. Also, I have downloaded and run CCleaner which has removed registry now dead keys associated with the repair of Windows virus in the registry.

  CCleaner: http://www.piriform.com/ccleaner

  Then I rebooted. That seemed to do the trick: I was able to update Malwarebytes again. I ran the program display offers the site computer network, and which unhid all files that was hiding the Windows repair virus.

  Again seems to work... thought it might be of help to you as well! Good luck!

• My computer restarts even I enter in safe mode

  My computer always restarts even if I enter safe mode and other options.

  When I choose an option it loads but the screen becomes blue with letters inside, after 1 second it restarts again.

  The computer will start up again.

  I tried to put the CD in Windows Vista but the installation does not appear.

  Please help me.

  Hello

  Try to disable the auto restart and display the error message for this will help us to work on the resolution.

  To disable automatic reboot of the Advanced Boot Options.
  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  In the meantime, try to perform the Startup Repair.
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Let me know if this helps.

  Kind regards
  Clement Kumar.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• Games running in safe mode

  Im running windows 7 64 bit and Im trying to use a couple more old games of Win XP, but for some reason any they (and only they) are managed by 7 in safe mode. I have DX 9 installed, the drivers are up to date, it's just these two games running in safe mode nothing to another and this pc is an installation I built last fall so he must smoke them so I know its not not this as a lack of performance.  Any ideas why its safemoding them and how in non-secure mode them? I limit myself to just get out them of safe mode if no one has any idea why its doing.

  Hello

  Looks like you're in XP compatibility mode, which is fine.

  Make older programs in this version of Windows (Windows 7)
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Have you tried right clicking on the shortcut to the program or the .exe and select "Run As Administrator"? Perform, even if your user name is an administrator. Try right click on the actual Setup.exe and choosing the option "Run As Administrator"? Perform, even if your user name is an administrator.

  Windows Virtual PC
  Download Windows XP Mode
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  Windows XP Mode (Windows 7 only, but not one of the Home versions) "you are not eligible to download Windows XP Mode. You must have Windows 7 Professional, enterprise or full to run Windows XP Mode." If you have an old XP CD (or other older Windows CD) available you can simply download the Virtual Machine and spend the XP Mode download. This warranty covers the gambit set of VMS in the 'Home' versions if you want to have a look. Of course you will need a licensed copy of XP to install and run in any of them (except XP Mode).

  Hope the information is useful.

• I get an Fatal Exception on start up error, and I can only run in safe mode on my dv6

  I get an Fatal Exception on start up error and I can only run in safe mode on my dv6, can someone please help?  I don't really want to reset to the factory settings I have to reinstall everything.  I tried to go back through the system restore, but it keeps telling me that there is no restore point?  I'm running Windows7 64 bit OS

  Thanks in advance.

  Hi Hazel,

  Start in Safe Mode, open windows control panel, open programs and features and uninstall Comodo Firewall (this will probably be listed as Comodo Internet Security depending on the version).

  Once completed, restart the laptop in Safe Mode .

  As before, open all programs, open accessories, right-click on command prompt and select "run as Administrator".  In the command prompt type the following commands and press enter after each one.

  Drivers CD                (Note that there is a space between cd and drivers)

  del cumon.sys           (Note that there is a space between the led and cumon.sys)

  output

  NOTE: If you get an error after entering del cumon.sys as the "specified path cannot be fouund", it's Ok.

  Restart the computer and see if Windows starts normally.

  Kind regards

  DP - K

• How can I check if Windows is running in safe mode on my pc.

  Original title: Mr. Thompson

  How can I check if Windows is running in safe mode on my pc. I'm trying to uninstall windows defender but I can't run the windows installer, I am still running windows xp. Thank you.

  Hello

  On the four corners of the screen that indicates that you are in safe mode, safe mode will be written.

  For more information on installation of windows defender, chk issues this link

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/how-do-i-uninstall-Windows-Defender/90e2315a-861a-4AC3-aeb0-80c38be62bba

  http://www.ehow.com/how_6293303_uninstall-Windows-Defender-XP.html

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-Security/Windows-Defender-uninstallreinstall-problem/6b7dd3e8-211e-46C8-A549-dbd53db0ed64

• Pavilion mini 300-010 in: no display after starting in safe mode

  Recently (2 weeks) bought the Pavilion Mini Office 300-010 and was well before decide me Flex my curiosity.

  the office is connected to my monitor VGA Samsung using the HDMI-VGA connector since the release of funds has no VGA or DVI - I usage options.

  the part where my curiosity killed the cat, was when I decided to start the winodws 8.1 in safe mode and see what happens.

  pressing F8 did not help that the load of the OS had no delay (or maybe it's the UEFI BIOS) and so I decided to put safe mode with "a minimum without network option 'using 'msconfig'." Performed a reboot assuming I see safemode and all I got is a black screen. Noticing that the driver for the conversion of the display cannot be loaded in safe mode and now I'm stuck because I do not have a p LCD monitor that plugs directly into.

  I checked the monitor VGA just in case, and it seems to work very well with my laptop. . Done reboot "N"-number of times and the result is the same. ".

  is there a way to get out of safe mode without actually doing a HDMI compatible monitor by just using the keyboard?

  Hello @LogicMantra,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how your office is not able to display after starting in safe mode, and I'd be happy to help you in this case!

  To fix this, I recommend you to borrow an HDMI compatible monitor and update the drivers for your system this way. If this does not work, please follow this document on the computer starts up but screen remains blank (Windows 8).

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• Windows Vista "Windows Installer service could not be accessed. Windows can run in safe mode or Windows install not installed correctly. »

  * Title *.
  Windows Installer not properly installed

  We just bought a new Dell with Windows Vista.  I tried to download i-tunes and I get the following error: could not access the Windows Installer service.   Windows can run in safe mode or Windows install not installed correctly.  I am not running in safe mode it should be setup of windows.   I am trying to install iTunes 8.0.2 Windows Vista 64-bit.  I found the info to repair Windows XP, but nothing for Vista.  Any help would be GREATLY appreciated.  I'm so frustrated.  Thank you.

  Hi BradandKim,

  We will try to start the Windows Installer service and see if that helps.

  • Click Start orb
  • Right click on computerand then click Manage.
  • If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  • In the console tree, click Services and Applicationsand then click Services.
  • In the details pane, right-click Windows installand then click Start.

  Let us know if that fixes the problem.

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• New Microsoft Windows 7 Pro 64 workload on a Folio HP book - Windows will not update even after running the tool

  I received a book of 13-2000 HP Folio damaged software.  Had to reload Microsoft Windows 7 Pro 64.  Windows is not the updates even after running the Microsoft 'tool' and 'fix it tool.  What is the last manual way to solve this problem.

  What is the last manual way to solve this problem.

  The last manual is to install the latest version of the Windows update client.

  https://support.Microsoft.com/en-us/KB/3161647

  Best regards, VZ

• my windows box works only in normal mode, cannot run in safe mode.

  my windows box works only in normal mode, cannot run in safe mode, in the fourth stamp corner with 'safe mode '. And when the loading starts there is a note: "3 processor system, multiprocessor kernel". When I run the Action Center in reliability monitor there is a note: "DefaultTabSearch.exe stop working. And when I check in the user account, in the tab - configure advanced user profile properties, there are 3 users: '1 default pofile (1.63 MB)' - "2nd computername\NameFileFolder (20.6 GB)" and "3rd computer name\updatus (58, 2MB)» Please give solutuion for this problem.

  I tried to restart and press F8 and already choose all the list of options, and the result is noting changed.

  Hello

  1 did you change on your computer before this problem?

  2 have you tried to run the Startup Repair tool? If so, what was the result? For more information, refer to this link: Startup Repair: frequently asked questions

  As you're able to boot in safe mode, you can restore the system back to its previous state when it was working fine:

  a. click Start, type system restore in the Search box and then in the list click on the system restore program.

  Note: If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  b. in the System Restore dialog box, click choose a different restore pointand then click Next.

  c. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  d. click Finish.

  
  Reference: System Restore: frequently asked questions

  Hope the information is useful.

• Firefox crashes at startup upward. tried to uninstall it. andreinstall crashes at startup... .even but starts in safe mode...

  Firefox 3.6 tracks great .but when I install 4 all that is this crash when it starts.

  do you have a complete uninstall. and then delete all files in firefox
  then firefox installed on a 2nd drive... to see if that would help. stop crashing when it starts.
  but no go.
  updated my video driver... still no go
  It starts in SafeMode... so I tried to disable all extensions and plugins. still firefox 4 a few crashes when it starts.
  It would be nice. If .firefox crashed .it would just tell you why...

  If I missed something .hope can someone help...
  Thank you

  PS
  I love firfox 3.6... But why would you put in the trash like that. It does not start even upward.
  are you trying to look like Internet Explorer.
  Crash... crash... accident...

  reinstalled 3.6 and collapsed the automatic updating for now. bold text

  Safe mode disables extensions in Firefox 4, and disables hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  If disable hardware acceleration works then check if there is an update available for your graphics display driver.

• Cannot get the plug-ins reactivated after booting in safe mode

  Firefox slow at startup, so after the reference to the trouble shooting page, elected to start Firefox in safe mode by disabling add ons.
  Can not reactivate Add ons. (Will manage add ons page, by clicking on the corresponding activation button not working not only product for people with disabilities by the title of the add element on) Each add on a name, for example Java (with people with disabilities in parentheses) and activate the button.

  Hello

  You can try leaving safe mode, start Firefox normally and check.
  Safe mode

• White screen after the Fail Safe Mode - XP, graphics, nVidia, graphics card

  Recently, my office computer Gateway running Windows XP was invited to update the nVidia GEForce 6100 driver.

  I went to update this driver.

  On the next boot, I waited several minutes, but the computer hung up on a screen empty AFTER the Windows screen.

  I tried to restart the computer normally several times, but still and always the white screen appeared after installing windows.

  I have my computer in Mode safe start, which I did. In safe mode, I disabled the graphics driver nVidia and restarted my computer. To restart the computer, it has actually reached to explore. However, in all the windows, I opened the image lag. Instead of a fluid scrolling, everything has been hectic.

  I have to enter the BIOS setup and clicked to start my computer in mode 'fail safe '. Afterwards, when I press the power button on my computer the blue light turns on, fan is running, and a single beep of the singular but NO picture on my monitor.

  I tried my monitor on another computer and it worked fine. I plugged the monitor into the gateway PC and yet, I get a black screen as if the Office Tower does not recognize the monitor.

  I thank you very much for any solutions or advice, you should be able to provide!

  All the best,

  -Evan

  Hello

  Please restart in safe mode, and then do the following

  Start - right click my computer - manage - Device Manager - adapt display - nVidia...

  Right click - Properties - driver tab - back driver.

  This should bring back your previous working driver.

  Please keep in mind that my answer is based on the information in your message. More the better I can answer, Slan go foill, Paul