EventDispatcher and timers

Similar Questions

• Why opaque readers comments and timers "loading" loop

  Yahoo.com/blogs are not enabled to write a comment.

  Hi dline1979.
  I was able to display items from Yahoo, and the feedback form has been activated once I signed in and used 10 Firefox. I would recommend that you upgrade to the latest version here:

  http://www.Mozilla.org/en-us/Firefox/new/

  If you see pages that hang and do not load, you can also try this link:

  Firefox crashes or does not - how to fix

  Hope that helps.

• OpenGL and timers

  Hello

  I noticed that all the demos OpenGL basically call render() in a loop in the main function. Are there best practices techniques to lock in a specific framerate, synchronize to the material cycle (for example, iOS provides CADisplayLink which is a timer that fires at intervals VBlank), etc.?

  Thank you

  Dan.

  Hi Dan,.

  Unlike Android or iOS, Playbook NDK apply properly swap interval is surface swaps syncs (similar to DirectX). So you should not need timers to synchronize your render loop. If you are targeting 60 fps, eglSwapInterval (mEGLDisplay, 1); or 30 images/s eglSwapInterval (mEGLDisplay, 2);

  Kind regards

  Stéphane

• Cluster WebLogic 12 c and timers EJB 3.1

  Hello!

  I am using Weblogic 12 c (12.1.2.0) Cluster.

  I configured datasource of the cluster tab of planning and created the tables ACTIVE and WEBLOGIC_TIMERS.

  
  

  @Stateless

  public class MyTimerService {}

  @Schedule (minute = "* / 2", time = "*")

  private void heartbeat() {}

  System.out.println ("heartbeat shot");

  }

  <? XML version = "1.0" encoding = "UTF-8"? >

  < wls:weblogic - ejb - jar

  ' xmlns:wls = ' http://xmlns.Oracle.com/WebLogic/WebLogic-EJB-jar "" "

  " xmlns: xsi =" http://www.w3.org/2001/XMLSchema-instance "

  " xsi: schemaLocation =" http://Java.Sun.com/XML/NS/JavaEE http://java.sun.com/xml/ns/javaee/ejb-jar_3_1.xsd http://xmlns.oracle.com/weblogic/weblogic-ejb-jar http://xmlns.oracle.com/weblogic/weblogic-ejb-jar/1.3/weblogic-ejb-jar.xsd' > .

  < wls:timer - implemented > Clustered < / wls:timer - implemented >

  < / wls:weblogic - ejb - jar >

  If I run the application on weblogic stanalone without timer of weblogic-ejb - jar.Xml.

  When I try to run the cluster with weblogic-ejb - jar.xml during deployment I have error:

  < error > < hats > < localhost > < MS1 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1404812226750 > < BEA-149231 > < cannot create the activation state to true for the application 'test '.

  weblogic.application.ModuleException: java.lang.NullPointerException

  at weblogic.application.internal.ExtensibleModuleWrapper.activate(ExtensibleModuleWrapper.java:123)

  at weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:114)

  to weblogic.application.internal.flow.ModuleStateDriver$ 2.next(ModuleStateDriver.java:192)

  to weblogic.application.internal.flow.ModuleStateDriver$ 2.next(ModuleStateDriver.java:187)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:42)

  at weblogic.application.internal.flow.ModuleStateDriver.activate(ModuleStateDriver.java:58)

  at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:145)

  to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:729)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:42)

  at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:258)

  at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:61)

  at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:165)

  at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)

  at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:222)

  at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:414)

  to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)

  at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

  to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)

  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)

  at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)

  at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)

  at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:191)

  at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:99)

  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:295)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:254)

  Caused by: java.lang.NullPointerException

  at weblogic.ejb.container.timer.ClusteredEJBTimerManager.uninitializeTimerHandler(ClusteredEJBTimerManager.java:220)

  at weblogic.ejb.container.timer.ClusteredEJBTimerManager.undeploy(ClusteredEJBTimerManager.java:185)

  at weblogic.ejb.container.manager.BaseEJBManager.undeployTimerManager(BaseEJBManager.java:438)

  at weblogic.ejb.container.manager.BaseEJBManager.undeploy(BaseEJBManager.java:420)

  at weblogic.ejb.container.manager.StatelessManager.undeploy(StatelessManager.java:397)

  at weblogic.ejb.container.deployer.EJBDeployer.deactivate(EJBDeployer.java:1327)

  at weblogic.ejb.container.deployer.EjbModuleExtension.preDeactivate(EjbModuleExtension.java:150)

  at weblogic.ejb.container.deployer.EjbModuleExtension.postActivate(EjbModuleExtension.java:140)

  to weblogic.application.internal.ExtensibleModuleWrapper$ ActivateStateChange.next (ExtensibleModuleWrapper.java:321)

  to weblogic.application.internal.ExtensibleModuleWrapper$ ActivateStateChange.next (ExtensibleModuleWrapper.java:313)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:42)

  at weblogic.application.internal.ExtensibleModuleWrapper.activate(ExtensibleModuleWrapper.java:121)

  at weblogic.application.internal.flow.ModuleListenerInvoker.activate(ModuleListenerInvoker.java:114)

  to weblogic.application.internal.flow.ModuleStateDriver$ 2.next(ModuleStateDriver.java:192)

  to weblogic.application.internal.flow.ModuleStateDriver$ 2.next(ModuleStateDriver.java:187)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:42)

  at weblogic.application.internal.flow.ModuleStateDriver.activate(ModuleStateDriver.java:58)

  at weblogic.application.internal.flow.DeploymentCallbackFlow.activate(DeploymentCallbackFlow.java:145)

  to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:729)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:42)

  at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:258)

  at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:61)

  at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:165)

  at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)

  at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:222)

  at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:414)

  to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)

  at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)

  to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)

  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)

  at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)

  at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)

  at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:191)

  at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:99)

  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:295)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:254)

  Could you please suggest what I doing worong.

  Above the problem I have when to deploy timer inside the large demand, I've created small test application comes with timer even and have another problem:

  < error > < EJB > < MS1 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > < BEA1 0003F3B65D8A > <>< 1404977347776 > < BEA-011090 > < the following error occurred when preparing call the method ejbTimeout (javax.ejb.Timer) of the TestTimerService(Application: clusteredTimer-0.0.1-SNAPSHOT, EJBComponent: clusteredTimer-0.0.1-SNAPSHOT.jar) EJB.

  java.lang.AssertionError: no strategy of transaction specified!

  at weblogic.ejb.container.internal.InvocationWrapper.enforceTransactionPolicy(InvocationWrapper.java:268)

  at weblogic.ejb.container.internal.BaseLocalObject.preInvoke(BaseLocalObject.java:88)

  at weblogic.ejb.container.internal.BaseLocalObject.__WL_preInvoke(BaseLocalObject.java:70)

  at weblogic.ejb.container.internal.TimerDrivenLocalObject.preInvoke(TimerDrivenLocalObject.java:35)

  to weblogic.ejb.container.timer.TimerHandlerImpl$ TimerObject.execute (TimerHandlerImpl.java:77)

  at weblogic.ejb.container.timer.TimerHandlerImpl.executeTimer(TimerHandlerImpl.java:53)

  at weblogic.ejb.container.timer.ClusteredTimerImpl.timerExpired(ClusteredTimerImpl.java:118)

  at weblogic.scheduler.ejb.internal.EJBListenerWrapper.executeTimer(EJBListenerWrapper.java:59)

  at weblogic.scheduler.ejb.internal.EJBListenerWrapper.timerExpired(EJBListenerWrapper.java:50)

  to weblogic.scheduler.TimerState$ $1 2.run(TimerState.java:200)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)

  to weblogic.scheduler.TimerState$ 1.run(TimerState.java:197)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:295)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:254)

  This problem seems to be caused by bugs:

  Bug 16730647 - ejb 3.1 timer can be deployed to a cluster weblogic 12 c - java.lang.nullpoint

  The patch is available for 12.1.2

  If please try to apply the patch and let us know your results

  Using OPatch 13.1 for Oracle Fusion Middleware 12 c (+ 12.1.2) (Doc ID 1587524.1)

  Best regards

  Luz

• Known issue 9.2 and 9.2.1 Siri?

  Siri will not process my requests to set alarms and timers, add events to my calendar, schedule reminders (among others). It will make calls to my contacts, sometimes. I called Apple technical support. I have done sunsequently a Genius Bar last week Thursday, and genius appointment he ran through a bunch of tests, did the resets, etc. and told me she would call back at the beginning of the past week.

  Because I never heard of him, I stopped yesterday and met with another genius. He told me he had intermittent problems with Siri as well. I told him, I understand, but Siri has not worked for me for three weeks in this particular way (some applications to work while others are still not). The genius sent me this email shortly after:

  

  Everyone knows about this problem? Would just continue to wait and update in the hope to be able to use the feature (Siri) once again?

  Thank you.

  I have exactly the same problem with my iPhone 6.   I could not use Siri on my iphone to play music, send text Messages, etc. Since the middle of December 2015. Everything worked fine for a year and then suddenly one day it just stopped working.

  I contacted Apple Support and they told me that they had never heard of this issue before!   They ran a bunch of 'tests' with me by phone but could not resolve.  They said they'd call me back when they had a solution - I'm still waiting for a callback.

  It's frustrating because I've always used my iPhone with eyes for free in my car listening to music and I can do it no longer.  Siri is a feature that I bought my iPhone to use and it does not work.

  The 9.2.1 update was has not solved the problem.

  I'd like to hear if you get this solved.

• Custom class EventDispatcher

  I send a customEvent to a class.  The class extends EventDispatcher, and I can verify that the event didn't actually get distributed.  But he isn't getting picked up by the mxml component or the main application container.  Bubbles is true.  What I'm missing here?

  Only the DisplayObjects can use bubbling = when true and alone on the display list.  Bubbles is generally bad practice, with the exception of the input of the user interface events.  Define singletons that other parts of the application can talk directly.

  Alex Harui

  Flex SDK Developer

  Adobe Systems Inc..

  Blog: http://blogs.adobe.com/aharui

• iOS 9.3.2 problem with alarms (Bug?)

  Hello community members

  I m new here and must start with a problem that occure on my iPhone since iOS 9.3.2.

  Alex I´m, 17 and I come from Germany. I apologize for any errors I could do

  If the problem is that since the iOS 9.3.2 my sensors in the clock app no longer works.

  When I set up an alarm, the iPhone automatically disable when I quit the app.

  This problem I've had since my iPhone 6. Then I bought for me the iPhone 6s and boot from a backup of the iPhone 6.

  Nothing helps me. I often reset the iPhone and turn it on but nothing really works.

   Care cannot help me too. Is that a person having the same problem?

  I don't really know what I can do to solve it. Now I use the watch for messages, but I want my iPhone to wake me up

  I hope someone can help me.

  Best regards

  Alex

  Hi AlexRis,

  Thanks for checking out the Apple Support and communities for details on what is happening with your alarms. I understand that you are experiencing problems with your alarms do not stay on your iPhone. I use a alarm every morning on my iPhone and my Apple Watch so I can understand how it is important to make sure that it works.

  I just want to be safe, make sure you follow the steps in the user guide to set up an alarm.

  Alarms and timers - iPhone

  Since you already mentioned reboot, the next step that I recommend is to reset all the settings on your iPhone. This does not erase any of your data (like photos, applications, or contacts), but you need to set some default settings save as wallpaper, ringtones, sounds system, restrictions, Touch ID & password and iMessage. You'll also need to reconnect to your Wi - Fi networks then make sure that you have your Wi - Fi in the information available. To reset the settings of your iPhone, go to settings > general > reset > reset all settings. The iPhone will reboot, then you can test.

  If it is not the thing to reset all settings, the next step would be to backup your iPhone and restore it via iTunes. Once restore you, you'll want to set up as a new device (temporarily) and test without your backup data. If it works, you can restore your backup and test again. You will find articles that will help you with the steps below.

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

  Restore your iPhone, iPad or iPod touch from a backup - Apple Support

  Best regards.

• execution time varied in image processing

  Hello

  I designed a vi to process the images eyes and calculate its Center. However I seem to be getting various run time sometimes 100 ms sometimes > 200ms. I used the structure of flat sequence and timers to measure the runtime of the vi. I had a few parallel processes and had forced sequential streams using error hydrants. But the problem still remains. I thought that the problem could be due to different images of entry but the execution of the same image again and again still the same problem poster. Can someone tell me what is the cause?

  Running code on a Windows system is NEVER deterministic.

  That being said, the code in a way that can be allocated in advance all the memory of the design will be an important step to improve performance.

  Playing with priorities can also improve things, but you can easily spoil if you use priorities in a bad way.

  In addition, applications running in parallel will induce the unknown system resources (CPU, memory, interfaces,...) and therefore lead to greater instability.

  If you really have a hard cap for example loop iterations about the jitter (e.g. must not have a jitter > 1us), the only way to address that moves to RT or maybe even of FPGAS (depending on the complexity vs interfaces vs knowledge/skills).

  If determinism is required for the material e/s if it is single point (as in control loops), material clocked IO and manipulation of the data packets in the application is sufficient for 99.99999% of all applications.

  Norbert

• Parallel loops

  Hello

  Recently, I did a software for 4 different points: A1, A2, A3, A4. Each element is seen logging their own buttons and generating their own names of files based on time. Similarly, each element is also having 4 different formulas and timers. All these tasks are expected to be executed in parallel. I have created about 8 parallel loops and my software worked very well. Today, I had to add series read loop and I discovered this series reading loop is not executed.

  This series read code works fine if I delete my rest of loops. Can someone tell me me how should I handle multiple loops. I know lu series code is correct, its a timing problem. Or tell me how I can avoid parallel loops.

  Thank you

  You have a lot of loops running at full speed, with each one trying to monopolize CPU all the time.  Put a delay in each loop.  Use 10 mS as the time-out value.  If you must run as quickly as possible, use 0 mS, but always put the delay even if it is 0 Ms.  This will give time for all loops CPU.  The loop of the series should run normally if he gets some time CPU.

  In fact, some loops (those waiting for the user to press a button) may use a delay of 100 mS without any noticeable difference.  This gives more time for the loop to run series.

• Problem of the NAC - Agent is a disconnect

  Hello

  We have a problem with the NAC in mode virtual outofband.

  AD SSO, sanitation, everything is working, but the strange things happening: after awhile, when downloading large files, Agent connects to the formula of network users, and the registration process is restarted.

  I disabled the pulsation clocks and timers, session, but we still have a problem.

  Also, while sniffing traffic on the switch port, I noticed that after have correctly connected you to the own Cisco Agent network always send traffic to UDP Port 8905. Is this a normal behavior?

  I noticed problems with this version of the agent causing connections to give up intermittently. I would upgrade to agent v4.1.3.1.

• Best practices for something like this

  Working on a project after learning of "Garbage collection" and some other things of this forum (thank you all) I was wondering if someone could look over this piece of code and tell me if Im using best practices or if it's just sloppy as hell and im going to this topic wrong.

  ALSO, I understand to delete eventListeners and children dynamically added to the scene. But you need to remove things such as interpolations and timers...

  If I have something with identifier = gcnew instantiate something ();  Do I always need to remove what little whatever it is to keep everything clean?

  package {
  
    import flash.display.MovieClip;
    import flash.utils.Timer;
    import flash.events.*;
    import fl.transitions.Tween;
    import fl.transitions.easing.Elastic;
    import fl.transitions.easing.Back;
    import fl.transitions.TweenEvent;
  
    public class ShooterProtoMAIN extends MovieClip {
    //MAIN MENU ASSETS
    public var MainMenu:mcMainMenu;
    public var MenuCredits:mcCredits;
    public var StartGameBttn:bttnStartGame;
    public var MainMenuTitle:mcTitle;
    public var MainMenuTitleTween:Tween;
    public var MenuCreditsTween:Tween;
    public var StartGameBttnTween:Tween;
    //PLAYER ASSETS
    public var Player:mcPlayer;
    public var PlayerReticle:mcReticle;
    public var ReadyCheck:mcReadyCheck;
    public var PlayerBase:mcBase;
    public var PreRoundTimer:Timer;
    public var PlayerControlEnabled:Boolean = false;
    public const PlayerMoveSpeed:Number = 3;
  
    public function ShooterProtoMAIN () {
    // constructor code
    }
  
    //MAIN MENU BEFORE GAME BEGINS
    private function MainMenuScreen () {
    //BUILD OUR MENU SCREEN
    MainMenu = new mcMainMenu ();
    stage.addChild (MainMenu);
    MainMenu.x = stage.stageWidth / 2;
    MainMenu.y = stage.stageHeight / 2;
    MainMenuTitle = new mcTitle ();
    stage.addChild (MainMenuTitle);
    MainMenuTitle.x = stage.stageWidth / 2;
    MainMenuTitleTween = new Tween(MainMenuTitle,"y",Elastic.easeOut,-50,100,1,true);
    MenuCredits = new mcCredits ();
    stage.addChild (MenuCredits);
    MenuCredits.x = stage.stageWidth / 2;
    MenuCreditsTween = new Tween(MenuCredits,"y",Elastic.easeOut,850,750,1,true);
    StartGameBttn = new bttnStartGame();
    stage.addChild (StartGameBttn);
    StartGameBttn.y = stage.stageHeight / 2;
    StartGameBttnTween = new Tween(StartGameBttn,"x",Elastic.easeOut,-50,stage.stageWidth / 2,1,true);
    StartGameBttn.addEventListener (MouseEvent.CLICK, StartTheShow);
    }
  
    private function StartTheShow (event:MouseEvent):void {
    MainMenuTitleTween = new Tween(MainMenuTitle,"y",Back.easeIn,100,-50,1,true);
    MenuCreditsTween = new Tween(MenuCredits,"y",Back.easeIn,750,850,1,true);
    StartGameBttnTween = new Tween(StartGameBttn,"x",Back.easeIn,stage.stageWidth / 2,-150,1,true);
    StartGameBttnTween.addEventListener (TweenEvent.MOTION_FINISH, MainMenuTweenFinished);
    }
  
    private function MainMenuTweenFinished (event:TweenEvent):void {
    MainMenuRinse ();
    BeginGame ();
    }
  
    //CLEANER FUNCTION FOR MAIN MENU;
    private function MainMenuRinse () {
    stage.removeChild (MainMenu);
    MainMenu = null;
    stage.removeChild (MenuCredits);
    MenuCredits = null;
    StartGameBttn.removeEventListener (MouseEvent.CLICK, StartTheShow);
    StartGameBttnTween.removeEventListener (TweenEvent.MOTION_FINISH, MainMenuTweenFinished);
    stage.removeChild (StartGameBttn);
    StartGameBttn = null;
    }
  

  who will most likely have no problems, but this is not (IMO), the best way to configure your project if it is your document class.

  codification that looks like it must be a class MainMenuScreen, which controls the display and the removal of the display of the main menu.

• ESX3.5 U2 blue screen with processor AMD daul

  We have a problem with ESX3.5 u2 start with the daul core AMD CPU, when ESX3.5 Initializes the timer, it willreport the error as follows:

  ;----

  ---

  TSC: cpu0:0 4552357591) initialization calendar...

  TSC: cpu0:0 10150276678) Init: VMKernel:718: cpu 0: tsc measured speed 2800112697 Hz, 2800112697 Hz (using TSC) CPU speed, bus speed 200008050 Hz

  Could not find a usable reference clock

  ;----

  ---

  and after Debug us we found, it seems, it cannot initialize the ACPI PM timer and daul AMD processor cannot find the reference count, so it will signal you the error.and qual hearts AMD processor, is not also initialize the ACPI PM timer, but he will refer to the timer with TSC. So, how ESX3.5 u2 detect ACPI PM timer and initialize it? By the FACT of the ACPI table? How ESX3.5 U2 can do qual AMD processor can reference with TSC, why Daul CPU can not?

  and we have another issue with ESX3.5 u2 start when we activated the HPET function, it will report as follows;

  ;----

  ---

  init IO_APIC IRQ

  IO-APIC (apicid-PIN) 2-2, 2-16, 2-17, 2-18, 19 / 2, 2-20, 2-21, 2-22, 2-23 not connected.

  .. TIMER: vector = 0 x 31 pin1 = 0 pin 2 =-1

  .. MP-BIOS bug: 8254 timer connected to IO-APIC

  ... try to put in place the timer (IRQ0) through the 8259... has failed.

  ... try to set up the timer like Virtual Wire IRQ... failed.

  ... try to set up the timer like ExtINT IRQ... unexpected trap IRQ vector 07

  trap unexpected IRQ to the vector 07

  failure: (.)

  Kernel panic: IO-APIC + timer does not work! rant [email protected]

  ;----

  ---

  So, how ESX3.5 U2 to check with these?

  Thank you very much.

  Is what brand/model of server? Is it in the version of ESX 3.5 certified list? What family of AMD processor?

  I got something similar on a whitebox server before where a bunch of stuff from power management enabled (' Quick ' n and calm "or something like that) which distorted speed CPU and timers like her in tray autour CPU running just as fast as necessary. For virtualization, you need all this out...

• Android - delay long chassis causing weird screen refresh

  I'm building a game for android using Air 3.5 and Flash Builder 4.6 devices

  Some of my game sections a little loading to do, so broke their place on a time to load a little at a time, allowing enter frames and timers to fire between each piece... and I put a glass of spinning on the screen as a wait flag.

  However, some of the pieces to still take a little time to run (usually when dealing with large images and such) and may take several hundred milliseconds to execute.

  Now, this isn't the problem.

  The problem is that these images, which take longer to 33 milliseconds (fps is set at 30) the spinner on screen seems to 'jump' to the rear for a partial picture.

  It's almost as the when the current enterframe executes, there are 2 Updates screen... occurring the first update shows the content of the screen as they were before the screen started to redraw and the second updates the screen as it should be now... the result is that, for this partial update of frame , the spinner seems to 'go back' a couple of images.

  This does not work on iOS devices or the pc, only android.

  Anyone know what could be the cause and how can I stop to happen?

  Found out what the problem was.

  When I was drawing text as an image, I would convert the stage for better quality, the drawing and convert it back down.

  Being old code just now. I have changed since this code to use drawWithQuality instead and pulled the stage.quality changes and the problem disappeared.

• Classes Loaded with getDefinitionByName() do not run code

  Hey everybody,

  I recently discovered the amazing features of getDefinitionByName(), but I'm running a few questions that I can't solve.

  I try to load an interactive book pages.  Each page has its own functions, listeners, nested animations and timers.  During the loading in these pages, no stop (s) don't work in the nested clips, and any interactivty was lost.  It's just a waste of a bunch of animations running again and again.

  Here's the code within my PageContainer class:

  package com.display.container

  {

  import flash.display. *;

  import flash.utils.getDefinitionByName;

  SerializableAttribute public class extends MovieClip PageContainer

  {

  public var clip: MovieClip = new MovieClip();

  public var className:String;

  pg1_container; pg2_container; pg3_container; pg4_container; pg5_container;

  pg6_container; pg7_container; pg8_container; pg9_container; pg10_container;

  pg11_container; pg12_container; pg13_container; pg14_container; pg15_container;

  pg16_container; pg17_container; pg18_container; pg19_container; pg20_container;

  pg21_container; pg22_container; pg23_container;

  public void PageContainer (currentPage: Number, target: DisplayObjectContainer,)

  LANDMARK: number, position: number)

  {

  className = "page" + currentPage + "_container;

  var ClassReference: Class = getDefinitionByName (className) class;

  Clip = new ClassReference() as MovieClip;

  clip.x = xLoc;

  clip.y = position;

  target.addChild (clip);

  }

  public void destroy (): void

  {

  trace ('removing');

  clip.parent.removeChild (clip);

  }

  }

  }

  And here's the call to the fla:

  var pageContainers:Array = new Array();

  var currentPage:Number = 1;

  var pageContainer:PageContainer;

  function pageTurn (): void

  {

  pageContainer = pageContainers.shift ();

  If (PageContainer)

  pageContainer.destroy ();

  pageContainer = new PageContainer (currentPage, this, 0, 0);

  pageContainers.push (pageContainer);

  }

  In addition to the MovieClips do not run code, I'm running serious garbage collection issues.  I can unload the display pages, but all the sounds continue to play.

  Does anyone have an idea of why these loaded MovieClips are not running the code, and why they will not correctly unload with the destroy() method?  Thanks in advance for any help!

  It solved!  As is often the case with the code, it was a little thing that makes a huge difference.  I noticed my pg2 worked for a reason, but nothing else has.  I compared the properties of pg2 pg3 and noticed 'Export frame 1' has been selected in pg2, so I put it on yes for all my pages and now they work.

  Thanks again for the help kglad.  I hope anyone else having a similar problem can find this useful advertisement.

• Change a text on the timeline of a class field

  Hello

  I need help to change the content of the text fields that are on the stage of the main timeline within an outer class. I created a countdown that is called from the Document class. I think it's a problem with the scope of the variable, but I can't get out.

  Main Document class:

  package
  {
  import flash.display. *;
  import flash.events. *;
  Import count_timer;
  Import RectangleButton;
  main/public class extends MovieClip
  {

  public void main()
  {

  create a Btn [begin]

  var startBtn_mc:MovieClip = new MovieClip;
  addChild (startBtn_mc);
  var startBtn:RectangleButton = new RectangleButton("Start",90,25,18,0xCC0000,0x000000);
  startBtn_mc.x = 105;
  startBtn_mc.y = 200;
  startBtn_mc.addChild (startBtn);

  startBtn_mc.addEventListener (MouseEvent.CLICK, onClickStartBtn);

  function onClickStartBtn(event:MouseEvent):void
  {
  var inputDay1:String = dayInputtxt.text; [these are fields of entry on the scene]
  var inputHr1:String = hrInputtxt.text;
  var inputMin1:String = minInputtxt.text;
  var inputSec1:String = secInputtxt.text;
  var counter: count_timer = new count_timer (inputDay1, inputHr1, inputMin1, inputSec1);
  }
  }
  }
  }

  Countdown:

  package
  {
  import flash.display. *;
  import flash.utils.Timer;
  import flash.events. *;
  import flash.text. *;
  Import RectangleButton;
  public class count_timer extends MovieClip
  {

  not sure it's correct
  public var daytxt:TextField;
  public var hrtxt:TextField;
  public var mintxt:TextField;
  public var sectxt:TextField;
  public void count_timer (inputDay1, inputHr1, inputMin1, inputSec1)
  {

  var inputDay = inputDay1;
  var inputHr = inputHr1;
  var inputMin = inputMin1;
  var inputSec = inputSec1;
  var msinputDay:Number = Number (inputDay);
  var msinputHr:Number = Number (inputHr);
  var msinputMin:Number = Number (inputMin);
  var msinputSec:Number = Number (inputSec);
  var ms: Number = Number (msinputDay).

  convert input in milliseconds
  MS = ms + msinputDay * 24 * 60 * 60 * 1000;
  MS = ms + msinputHr * 60 * 60 * 1000;
  MS = ms + msinputMin * 60 * 1000;
  MS = ms + msinputSec * 1000;

  addEventListener (Event.ENTER_FRAME, loop);

  function loop(e:Event):void
  {

  MS = ms - 1000;

  var sec: Number = Math.floor(ms / 1000);
  var min:Number = Math.floor(sec / 60);
  var hr:Number = Math.floor(min / 60);
  var day: Number = Math.floor(hr / 24);
  s = s % 60;
  min = min % 60;
  HR = % 24 hr;
  
  daytxt. Text = day.toString (); [everything seems to work for these variables. I think it should be root.]
  hrtxt. Text =(HR<10)? "0"+ HR. ToString(): hr. ToString();
  mintxt. Text =(min<10)? "0"+ min. ToString(): min. ToString();
  sectxt. Text =(sec<10)? "0"+ dry. ToString(): sec. ToString();

  If (ms < = 0)
  {
  removeEventListener (Event.ENTER_FRAME, loop);
  gotoAndPlay ("TimesUp");

  }

  }
  }
  }
  }

  Thanks in advance.

  Your code will not work as show you. First of all, you shouldn't put your methods of the class inside the builders... And Yes - scope. You do your new count_timer as a local variable inside a function that is called when the click on. Essentially, the timer went so fast that it is created. If you want the timer available to other methods in the class must be declared as a var in the class definition.

  And I agree with kokorito - your timer to extend EventDispatcher and then he can do like: dispatchEvent (new Event ("myTimerEvent")); and you can then add an eventListener to it when you create in your main class. You listen to just "myTimerEvent" or any string you use and call any function you want - as well as the use of any other listener.