Events of action stops working

Similar Questions

• [R] Intel PROSet/Wireless event log Service stopped working. What is c? Please help me.

  What log the events ofIntel PROSet/Wireless Service has stopped working? Please help me.

  Hi Tariq.khan,

  ·         Exactly when you receive this error message?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I was able to find a link from the Intel site, where the question seems to be addressed, I recommend you to go through the link given below where a users seems to have found the solution.

  [R] Intel PROSet/Wireless event log Service stopped working

  http://communities.Intel.com/message/69976

   

  Method 2: I suggest you to check and clean the boot if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned at step 7 of the article mentioned above.

  Let us know if that helps.

• Error - the Intel PROSet/Wireless event log Service stopped working andwas closed

  Whenever I am re-booting, I get this error window:

  "Error - Service of Intel PROSet/Wireless event log stopped working andwas closed."

  It started a month ago. I can't tell at all what I did--except that I installed a router Linksys Cisco Wireless (802.11 N), replacing an old Netgear device (802.11 G).  My wireless feature works well and I really do not notice the effects to receive this error message.  I don't remember having this error immediately after installation of Linksys.  I "think" some time elapsed before the error started - but I don't re-boot often, so it could be related.

  I'm on Vista Ultimate OS, with Service Pack 2.

  Intel (R) Core (TM) 2 DUO CPU T9400

  Hello

  I was able to find a link from the site intel, where the question seems to be addressed, I recommend you to go through the link given below where a users seems to have found the solution.

  http://communities.Intel.com/message/69976

  Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  However you can make the boot which would help you to cut down on the service that is causing this problem.

  To perform a clean boot on a computer that is running Windows Vista, follow these steps.

  1. click on start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after starting the computer, reinstall and run the program and see if the problem is resolved.

  Check if you have the same problem... If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.

  http://support.Microsoft.com/kb/331796

  To restore your computer to a Normal startup mode, follow these steps.

  1. click on start in the box start the search.

  2. type msconfig and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  3. click on the general tab.

  4. click on Normal Startup - load all device drivers and services and then click OK.

  5. When you are prompted, click on restart to restart the computer.

  Let us know if this helps

  Concerning
  Anthony.

• When I turn on the computer, I get this message - COM + Event System has stopped working. How can I activate this return?

  I had virus protection total defence installed. This occurred immediately after.

  Hello

  Thanks for your answer to my question. I was about to start step 2, by performing a boot minimum when a message pops up informing that 2 programs were slowing down my computer and also to stop because they were also running. Ironically, these programs I've ever used has appeared on my computer advertising protection against viruses and to speed up the computer.

  I did not purchase the license if it comes to start up all the 3 or 4 days telling me that my computer is slow.

  I uninstalled both programs, which I won't mention for obvious reasons and the event system Com + message did not return after the computer has restarted 3 times. Apparently, the problem has been resolved, but I will continue to have oversight. If the problem returns I'll restart and inform you about the results.  Thanks again for your expertise. guavaridgemb

  Thanks for posting your question in the Microsoft Community.

  I understand that when you turn on the computer, you get an error message indicating that COM + has event system stopped working. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  Please follow the steps and check the question below:

  Step 1:

  Check the event viewer for the logs of error from the links below.

  Open Event Viewer:

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  What are the information in event logs? (Event Viewer):

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

   

   

  Step 2:

   

  You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

   

   

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

   

  Step 3:

   

  Scan your computer by using the Microsoft Safety Scanner by clicking Download now to check if there is no virus infected:

  http://www.microsoftsafetyscanner.com/

   

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

   

• EVENT VIEWER HAS STOPPED WORKING!

  My OS is Windows 7 64-bit, 800 GB hard drive and 2 GB of RAM right now. I played an old game on a CD and then it just crashed. I opened the event viewer for the resolution of problems and it says check if Event Viewer runs.

  I am totally astonished that this happened because I have read this on forums but, it was for Vista only. Any suggestions would be welcome and one that works, I'll answer for your expertise. Thank you...

  Shekhar s,

  I want to say thank you very much for the 100% correct answer, you sent me. I thought I had to do a complete restore with the Installation diskettes.

• Click the event Script has stopped working. Help, please!

  I must have forgotten a step in the preparation of an email button that will extract the data from a field in the subject line of an e-mail and I would like to create the body of an email.

  I'm taking a button and adding a click event to:

  var Mailto = " " [email protected] "; "

  var BetreffSubject = Legal_Name.rawValue;

  var NachrichtMessage = "it's 1.\r\rConfidentiality line opinion! \rThis is the beginning of the third line ';

  var email = ' mailto: ' + Mailto + '? Subject = Report Site for "+ BetreffSubject +"& Body ="+ NachrichtMessage;"

  event.target.submitForm({)

  cURL: Mail,.

  bEmpty: true,

  cSubmitAs: 'PDF '.

  });

  When I click on the button, nothing happens.  what I am doing wrong?
  

  Hi RudyLou36,

  Please download the file https://workspaces.acrobat.com/?d=0n * uLjnmLGX8VlHRCW5n7A and check the click event of the button "control of email through script.

  Kind regards

  Rous

• Intel ProSet/Wireless Services event log has stopped working

  I get this message at the start and ran the diagnostics and the hardware failure for the Intel PROSet / Wireless. Help! Thank you

  Hello amaas1982,

  You can try to reinstall the software for the Intel PROSet / Wireless and see if that will help the issue.
  Download from the link here. You can also update all drivers and see if that helps.

  If you're still having problems, then after, I suggest that contact manaufacter for support.
  Click here to post your question in the Intel community forums.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Event log Windows has stopped working due to an appcrash.

  Recently on windows problem reports and solutions, I got a note saying: windows event log has stopped working due to an appcrash.

  I went to the windows event logs and record the time and the problem. I'm relatively new to computers so I could not understand the problem.

  I find the time, this event occurred and I got a certificate service Id 64, a application Id 1000 event.

  could someone help me with this problem, thank you

  The Office of response technicians can probably help you. Click on this link-online http://answerdesk.microsoftstore.com/

  Good luck.

• EVENT SYSTEM COM + HAS STOPPED WORKING

  Not sure the cause of this message, I have no choice but to come on the forum and ask questions that can help me identify the problem and how to solve it.  I have a laptop TOSHIBA Satellite A205-S5852 with Windows Vista Home Premium operating system.  The details of the message is:
  Signature of the problem:
  Problem event name: BEX
  Application name: svchost.exe_EventSystemApplication
  Version: 6.0.6001.18000
  Application timestamp: 47918b 89
  Fault Module name: netprofm.dll_unloaded
  Fault Module Version: 0.0.0.0
  Timestamp of Module error: 4791a73e
  Exception offset: 691d814d
  Exception code: c0000005
  Exception data: 00000008
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 1033
  Additional information 1: 2b5e
  More information 2: d41d8cd98f00b204e9800998ecf8427e
  3 more information: 6c8e
  Additional information 4: 394a6bb34f36a03a2ba20af95ac6aae6
  Open to any suggestion to get rid of sending this message.  Thank you!

  Bori1033AKAFRED & Char8691,
  Here is the solution for the COM event system + no stopped working error:

  COM + a event system stopped working

  Right click on "computer".
  Click 'manage '.
  In the section 'System tools', Double click 'local users and groups.
  Click on 'groups '.
  Right click "directors".
  Click on 'add to group... ". »
  Click 'Add '.
  Click on "Advanced".
  Click on "search".
  Double-click on "Local Service".
  Click on 'Ok '.
  "NT Authority\Local Service" should appear in the list now
  Click on 'Ok '.
  Close computer management, and then restart.

  Please post back and let us know if this solves your problem or if you still need help.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Common handler stopped working displayed every time and guard appearing during the use of the computer

  My computer shows the message box ' common event handler has stopped working ' that appears when using the computer even when left repeatly or reduced to a minimum

  Hello janet,.

  1. don't you make changes before the show?
  2 did you install CA anti-virus program on your computer?

  We found that the common event handler is part of the CA software. We recommend that you try uninstalling and reinstalling the program to fix this error.
  See Uninstall or change a program

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Intel (r) PROset/Wireles framework stopped working

  Whenever I start my computer it again me 'Intel (r) PROset/Wireles framework has stopped working' and when I close it, it comes right back.

  Pleaseee help it is so boring.
  PS Im on windows 7 and 64-bit java and other things.

  Hi Zeelex,

  That could indicate that the Intel Wireless and Windows utility Native Wireless (WLAN) Utility are all two installed to be active.

  1. when exactly you receive this error message?

  2 did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I was able to find a link from the Intel site, where the question seems to be addressed, I recommend you to go through the link given below where a users seems to have found the solution.

  [R] Intel PROSet/Wireless event log Service stopped working

  http://communities.Intel.com/message/69976

  Method 2: I suggest you to check and clean the boot if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned atstep 7 of the article mentioned above.

  Let us know if that helps.

• HP Pavilion dv5237cl Notebook intermittently Shuts Down Due to a thermal event, fan stops working

  Basics:

  HP Pavilion dv5237cl

  Windows XP SP3 32 bit

  PCMCIA SATA card

  1 TB WD Scorpio blue HARD drive

  Computer laptop with 200mm fan cooling pad

  Some USB devices

  Latest drivers and BIOS

  Note: This problem also occurs with Windows 8.

  For the last year my HP Pavilion dv5237cl turned off because of the fan does not work.  I have never seen the term "Thermal event" displayed prior to or on restart.  Usually just abruptly, he died.   I also saw a few BSOD that are not very descriptive to pointing to what the cause was and may be not related.  The laptop usually just stops working and goes out, maybe once every couple of days if it is caught in time.  I HAV been using a Defragmenter memory to help as appropriate the BSOD were due to low memory resources.  I am tracking the temperature of the CPU and have noticed that it is high, when the fan is not working.  I saw up to 85 C and I'm not sure but think that the laptop stops at 100 ° C.  The fan is usually always go at least to a low hum.  Usually, on startup, I get a strong burst of activity fan and if this isn't the case I'm clued in to a fan, not to exploit the condition.

  If I take a PIN regularly and carefully stitch it through the opening in the fan and cause rotate the blades of the fan, the fan will usually start working.  It sometimes takes a few tries.  I noticed the fan poll as it is sometimes wobbling and resembling a noise of ball bearing, but I think it is also maybe a hinged fan.  Some hopping may be due to the time that I used the pin code.  Fan usually settled in a low purr and lately with some ball light bering sound, maybe just wobble.  If I'm not there when the fan stops working or do not notice to try to remedy with a PIN, then the laptop stops due to excessive heat.

  Things I've tried or thought of trying:

  -J' I used canned and out air / blow accumulated debri from inside the vacuum cleaner to suck up and cleaned the vents.

  -J' I add the cooler that keeps time less around 5 c.  The laptop temperature was 55 to 62 C this winter.

  -Install the latest drivers and BIOS.

  -Tried to use Windows 8.

  -J' bought a replacement fan but did not want to disassemble the laptop to install it and also not be

  not know if it is really a material fan or a control sensor or other hardware problem or software problem.

  Thanks in advance.  Help to solve this problem would be appreciated.

  I understand that your laptop stops due to overheating.

  Given the behavior and how the fan no longer works and must be "started" once again, this does not sound like a fan failure.  Page 5-60 of this guide details the process of replacing the fan and the heatsink in Notepad.  If this is something you'd rather not do it yourself, you could contact a local PC shop for the fan and the heat sink replaced.

• Whenever I connect to internet I get this message within seconds, Internet Explorer has stopped working the check online for a solution of the problem event name: the BEX Application name: IEXPLORE. EXE

  ExploInternet Internet exporer has stopped working

   

  Windows can check online for a solutiom to the problem

   

  -> OnlinCheck check online for a solution and close the program

   

  -> Close the don't

   

  PROBLEM ISEVIDENT

  Signature of the problem:

  Problem event name: BEX

  Application name: IEXPLORE. EXE

  Application version: 11.0.9600.18231

  Application timestamp: 56b8edd6

  Fault Module name: StackHash_d7b8

  Fault Module Version: 0.0.0.0

  Fault Module Timestamp: 00000000

  Exception offset: 1002ab36

  Exception code: c0000417

  Exception data: 00000000

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 3081

  Additional information 1: d7b8

  More information 2: d7b83704f6db94e0c4619825a3362866

  3 more information: 6b 15

  Additional information 4: 6b153378e67b448e43ca3c57dc8920c9

  Then, I lose the page and have courses all over again.

  Can someone please help. It started only happening more than a week.

  Hello

  Thank you for your response. Check this link and follow the post SpiritX for troubleshooting steps.

  Please let us know how it goes for help us to you more.

• Canon MP Navigator EX has stopped working; Problem event name: APPCRASH Application name: mpnex40.exe

  Original title: Canon MP Navigator EX has stopped working

  I use Win 7 64 bit. I spent an hour with Canon. I followed their directions without success.  I did everything suggested on the internet without success.   I uninstalled and reinstalled. I tried to fix the corrupted user file. The scanner send scans to the computer for work. The person Canon thought it might be a corrupt and says something about a twain file function registry file. Here are the details of the problem:

  Description: Has stopped working the problem signature: problem event name: APPCRASH application name: mpnex40.exe Application Version: 4.0.2.0 Application timestamp: 4df9a6aa fault Module name: ole32.dll Version Module fault: 6.1.7601.17514 fault Module Timestamp: 4ce7b96f Code of Exception: c0000005 Exception Offset: 0004afb2 OS Version: 6.1.7601.2.1.0.768.3 locale ID: 1033

  Thanks for any help.

  Hello

  1. have you tried to create a new user profile?

  2. what happens when you work with Canon MP Navigator EX?

  3. do you get an error message? If Yes, what is the full error message?

  4. What are the troubleshooting steps you have tried to solve the problem?

  5. have you done any software or hardware changes on your computer before this problem?

  Try the following steps.

  Method 1:

  Run the fixit from following link.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  Scan of the SFC

  Refer to this article for more information on how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7.

  http://support.Microsoft.com/kb/929833
  Display the results.

  Hope the information is useful.

• What should I do if my computer Action Center message says: "your Intel Graphics Driver has stopped working twice?

  My computer message of the Action Center said: "your Intel Graphics Driver has stopped working twice?

  What should I do to solve the problem?

  Hello AletBotes
  Try to uninstall the old version of the graphics driver Intel or by reinstalling fix it. It is always best to update the drivers to the latest version you can find on the website of the manufacturer of the computer. If you have no problem with the video/graphics and if the Action Center message bothers you in any way, you can turn it off in goin to this place the Center Items\Action Panel\All Control Panel control and then in the left pane click on change Action Center settings > uncheck the required Notification or uncheck everything. Click OK. That's all.