Exactly the type of RAM for M200 (1, 8 GHz)

Similar Questions

• What is the maximum system RAM for PC laptop HP Pavilion e113dx 17?

  What is the maximum system RAM for PC laptop HP Pavilion e113dx 17?

  Depending on on where I look, I seem to get contradictory information

  New HP 17 laptop AMD configurations = 12 GB max

  Crucial.com = Memory Configurator, max 8 GB

  I think the max is 12 GB (4 GB in slot 2 and the option to add a 8 GB RAM module)

  Thanks for all the help

  Hello

  The following link shows its specifications:

  http://support.HP.com/us-en/document/c04170665

  Only 8 Gb normally with two RAM slots, they have max: 2, 4, 8, 16, 32. No odd 12 GB.

  Kind regards.

• Question about the extension of RAM for Satellite A50-522

  Hello

  I have a Satellite A50-522, with a Pentium M 715 @1. 5 Ghz processor and Intel 855GME chipset. To expand its RAM I referred to the Spain/Toshiba support website and I bought the PA3313U-2M1G (1 GB SDRAM 166 MHz DDR333/PC2700) via amazon.com. It turns out that this RAM is for "Alviso chipsets" - which are those relating to the Intel Centrino processors with 9xx series express chipset. I called Toshiba/USA and they recommend the PA3313U-1M1G or its equivalent Kingston KTT3311 / 1 G (since it is impossible to find in the Mexico), instead of the one I already bought. They all seem exactly the same thing in their description, except for the note "alviso chipset.

  My questions are:
  (a) is the chipset of this computer, considered "alviso" type? and
  (b) if not, should I keep the RAM I bought already (PA3313U-2M1G for alviso chipset)?, can I have performance or compatibility problems? What are the risks of the use of this "alviso RAM' in a 'no-alviso chipset? I deeply appreciate your input.

  Thank you!

  Hello

  The RAM modules for especially for chipsets alviso are not known to me, but the Satellite A50-522 certainly supports the memory PC2700 PA3313U-1M1G bar.
  I guess the PA3313U-1M1G and PA3313U-2M1G are the same modules from memory.

  PA3313U-1M1G and PA3313U-2M1G memory module are supported the same specifications of 1 GB - SO DIMM 200 pin - DDR - 333 MHz PC2700

  I think you can use both modules without any problem.

• Pavilion dv7-6b32us - max and the type of RAM I can install it?

  Hello

  For the pavilion dv7-6b32us, which is the type and maximum RAM I can install?

  The manual says it can go up to 16 GB, but I don't see that 8 GB (4 x 2) available for sale in the world.  We do not know also what type I need.

  Thank you...

  Hello

  Please check this:

  http://www.crucial.com/upgrade/HP+-+Compaq-memory/Pavilion+dv7+series/Pavilion+dv7-6b32us-upgrades.html

  You can buy from them or use the information to buy elsewhere

  Kind regards.

• ENVY 15 t-j000 Quad Edition Type of Ram for upgrade

  I try to add a stick of ram to 8 GB for my ENVY 15 t-j000 Quad Edition. Site HP Web does not list the type/size of ram to find the stick of ram suitable for upgrade. If someone knows this information, it would be a great help. Thank you.

  henry_mb wrote:

  I try to add a stick of ram to 8 GB for my ENVY 15 t-j000 Quad Edition. Site HP Web does not list the type/size of ram to find the stick of ram suitable for upgrade. If someone knows this information, it would be a great help. Thank you.

  Hello

  What is the new portable Haswell? This laptop supports modules SODIMM DDR3 1600 MHz, but take a look what original config is. HP uses memory especially two modules config so if there are already 8GB it will be probably 2 x 4 GB modules. I recommend this one:

  http://www.Amazon.com/Corsair-vengeance-laptop-memory-CMSX8GX3M1A1600C10/DP/B0076W9Q4Q/ref=sr_1_3?s=PC&ie=UTF8&QID=1373665809&SR=1-3&keywords=vengeance+SODIMM

• Help with the driver DvD Ram for satellite P10

  On my laptop (satellite p10) is Windows 2000 Professional running, but the driver DVD Ram of the Toshiba Homepage does not...
  Where can I get a driver that works on my laptop?

  Hi Val,

  The correct driver for your laptop running Wnidows 2000 should be version 3.0.8.0 and is available for download from the Web from Toshiba website.

  I presume that it is the one that you tried, so I don't know what you mean when you say that "it doesn't."

• Update of the modules of RAM for my desktop pc

  I want to buy G.Skill Ares RAM for my HP Pavilion G5460uk. The specs are below the RAM

  Model number

  Yes, memory G. Skill you watch should work. This would allow your system with 8 GB of RAM.

  Please send Bravo

• Is there a control of the type of compilation for .as files?

  It seems that there is no support of compilation for .as files. I have made a typo, typo HttpService, instead of HTTPService, in one of my .as files, but surprisingly, Flash Builder does not report it at all. I enabled 'Build' automatically, so I guess that if there are errors, Flash Builder has the flag. I also tried to clean up the project and force to build the project manually, but still it doesn't show any compilation error problems.  See screenshot below:

  

  On the other hand, if I made the mistake in the .mxml file, Flash Builder it correctly mark as error.

  Please see the screenshot below:

  

  I want to have the type of compilation to check what work on .as files too. Is there a way I can activate that?

  Thank you.

  Your results are correct. The compiler is limited to the display of compiler errors in the context of a compilation unit (application, module, etc.).

  Jason San Jose

  Software engineer, Flash Builder

• SDC RTU Modbus - cannot specify the type of query for each register address

  Hi, it's Jose.

  I have try the DSC module to connect with a temperature module, but this, does not meet the MODBUS registers addresses, for example to read the temperature, I should ask a 0 x 03 at address 1001.

  

  But for DSC for a request of 0x03, it expects to addresses like 4000, so since 1000 addresses belongs to coils, SDC makes a request of 0x01

  

  My thermometer has even coils register.

  Is there a way to force the DSC to make specific requests?

  Thank you and best regards

  What happens if you enter the numbers as 400001 401001 or simply?

  Also try to only 1.

  The current Protocol does not transmit the prefix number which he calls a coil (1) or (4) record keeping, (3) registry entry.  (I mixed up to the top of the last two is possible).

  So the device describing the registry with the wrong group of addresses, may not matter.  You just lie to LabVIEW to tell him where he thinks is it supposed to be.

• Where to buy the upgrade of RAM for my Satellite M30-344?

  Hello

  I want to upgrade my RAM from 512 MB to 2 GB memory. After reading in the nets, he would say the PC 2700 DDR SODIMM (33135 PA-2MIG) would correspond to my laptop. Anyone know where to buy it? could not find it on ebay and other suppliers of portable... Is it too old and trade off already?

  See you soon,.

  Kat

  Where to buy?

  Hey buddy don't you hear something on the shops online, amazon, ebay, etc.  ;)

  If you know what Rams are compatible, then simply google for some nice offers.

  You can also buy it at a computer retailer in the city center

  As you can see, you have more options.

  Good bye

• create the type of step for a stage of COM

  Hello

  I use the COM adapter to interface with TestComplete.

  My current setup is that I have a Master file of sequence that contains two sequence files (one for each trial).

  The individual called movie file have 4 steps as indicated:

  Get property: Create the new object

  Calling a method to open project

  Call the method to run the test, and then pass the parameter in TestComplete

  Get the result of the property

  My problem is that if I want to spend a different setting in the step to call the method to run the test , I have to create another sequence file to do this.

  Is there a way to create one Type of step to call the method, run the test and pass parameter to TestComplete?  and how will this affect the other steps in this sequence file (for example to create new object, open a project, Get property resut)?

  Thank you!

  Jigg,

  Yes, I think it worked!  Thank you very much!

  Question: to chaange the param1, it is necessary to specify the module and change the value in the edit sequence window call under the table of parameters.

  Is it possible to build an easier user interface as the synchronization-> Wait-> Configuration window not to wait, where you can just put in the value of the parameter, and that's all.

  Thank you

  pH

• ENVY DV7 7243nr: how to identify the slots of ram for my hp Envy DVD 7243nr

  I bought a 4 GB memory module to replace the 2 GB one in my laptop, I can't identify what the 2 GB one.

  The other location contains a module of memory 4GB so this will improve my laptop it's RAM max.

  Hello

  The label of each original memory has a part number, pudes looking for you:

  http://PartSurfer.HP.com/search.aspx

  Although without this label, you can leave only one of the original modules, see the system information in the Control Panel, or run a program that shows you:

  Crucial.com - Crucial System Scanner

  Concerning

• Maximum speed and the amount of RAM for m7664x

  I have a m7664x that I will be upgrading to Windows 7 64 bit and I want to upgrade the RAM.

  According to the specifications of the product, there the mother of A8M2N-(NodusM3) with 4 DIMMS.  On this page, it says that it supports up to 4 GB of RAM to 667 MHz.

  Now, I came across a few posts here and elsewhere that suggest it can handle more (up to 8 GB) and more RAM speeds (PC6400 / 800 MHz) and recognized him and used.

  Can anyone confirm that it can support up to 8 GB of RAM and with higher speeds?

  Wow, what an old thread!

  To answer your question and update this thread, I bit the bullet and bought 8 GB of 800 MHz RAM and worked for almost a year now.  I seem to remember that I ran MemTest on it and it shows that he is indeed running at 800 MHz, but that's a long time I would have done, if I did.

  I also thought about upgrading the processor, but already at that time, I installed the RAM (close to a year ago), compatible processors were hard to find and expensive.  In addition, the machine was not used for anything else than to the General functions and has also been hampered by graphics shipped to start.  At the end of the day, spend the extra money on a pretty old computer RAM was the limit for me.

  blueeclipse86, you can try to upgrade the RAM on your machine, as I have done, but, of course, I can't guarantee that it'll work for you.

• How can the consumption of ram for a game?

  Original title:;

  RAM problem.

  Hi all, I have 4 GB of ram on Windows XP (32-bit), but games says it's using 500 MB, and I want to know if this is TRUE and if it is true how to use my all concerts.
  Thank you.

  Hello

  1. where exactly do you see that game uses 500 MB?

  2. what game you play and how?

  3. are you with all the questions?

  Provide us with more information about the issue so that we can better help you.

• Type of RAM for dv3-2350ed

  I have Pavilion dv3-2350ed.

  Lately, I feel that my laptop get slower, perhaps because of my RAM is only 4 GB & I have only 50 free GB left on my hard drive also. I can't right now is to upgrade my RAM 8 GB, as it says max 8 GB

  So, I have some questions about the RAM and would be great if someone can help me:

  1. What kind of RAM corresponds to my laptop? (HP Support Assistant sowftware it says 4 GB 2 other SODIMM Slots 1067 Mhz Micron)
  2. I think I hv 2 slots, is better to buy 2 x 4 GB or 1 x 8, or whatever?
  3. On the description on HP Forum on my laptop it says max 8 gb, which would be ok if I install 16 gb (2 x 8 GB)?
  4. Is it easy to install the RAM? What is the risk? (I know about PC its just plug 'n play)
  5. If I install RAM by myself, my laptop warranty void?

  Thank you very much

  Hello:

  Here are my answers to your questions...

  • What kind of RAM corresponds to my laptop? (HP Support Assistant sowftware it says 4 GB 2 other SODIMM Slots 1067 Mhz Micron) A: you have 2 x 4 GB PC3-10600 memory, since you have a model dv3-23xx.
  • I think I hv 2 slots, is better to buy 2 x 4 GB or 1 x 8, or whatever? A: you have 2 slots, and yes it's not serious. The max RAM per slot is 4 GB.  8 GB in a slot will not work.
  • On the description on HP Forum on my laptop it says max 8 gb, which would be ok if I install 16 gb (2 x 8 GB)? R: NO.
  • Is it easy to install the RAM? What is the risk? (I know about PC its just plug 'n play). R: Please read Chapter 4 of the repair on the link below. Ease of installation depends on your own ability. After reading the section on removing the memory and replace, you can decide for yourself how it's going to be easy.  Properly installed compatible memory is just plug and play.

  http://h10032.www1.HP.com/CTG/manual/c01998025.PDF

  • If I install RAM by myself, my laptop warranty void?  R: only if you physically break something during the process.

  Paul