Exam VCP - chance to consider issues and go back?

I recently attended a review of CCNA in a view pearson test center and I was a little shocked to realize that I could not go back to the questions to check/change my answers after moving on to the next question!

Is the the same Collect?  Can I go back and review and edit questions or just do only once the question?

Thank you

No, it's not the same. You can review or go backwards when you think that you made a mistake. You can also mark questions for review, I usually use for the questions that I'm not sure.

Duncan

VMware communities user moderator | VCP | VCDX

-

Tags: VMware

Similar Questions

  • Can we ignore the issues and come back later?

    When you take the exam of the DCA, we jump and then come back to them later questions.

    I know that you cannot mark for review later.

    Thanks for the tips.

    Several tasks relating to the review are independent of each other, so you could make their task with any order of your choice. But other tasks are related for you wouldn't be able to do a task later successfully if you have completed a task earlier.

    For example - you can have 1 task to change some rules a cluster your DRS, but could have jumped the previous task in which you had to create the DRS cluster.

  • Recommendation of lab exam VCP 550

    Hello

    I have a server on which I have installed ESXi and I am planing Practice exam vcp 5.5.

    Where is the best: create 2 vm with ESXi on that physical server, or just a vm with ESXi?

    What are your recommendations?

    In order to be able to try the most high-availability features you need a minimum of 2 servers ESXi, then I recommend you create two nested ESXi hosts to practice. With such a configuration, you should consider configuring vCenter Server on the physical instance of ESXi.

    André

  • How exam VCP can be changed after releasing the vSphere 5.1?

    Hi all

    I am preparing to review the VCP of vSphere 5.0, and now vSphere 5.1 came out, so I have a few questions on the possible evolution of the review of the VCP in near future:

    -Do you know or can you guess when the knowledge/skills based on vSphere 5.1 will be tested on the exam?

    -Exam based on vSphere 5.1 will be a separate with its own code review, or the current review of the VCP5 is updated to include the content of vSphere 5.1?

    -If the VCP5.1 exam (based on vSphere 5.1) will be a separate consideration, it will replace the current VCP 5.0 review? or the two exams for vSphere 5.0 and 5.1 coexist at the same time?

    I have invested in current VCP5 exam, so I just want to know if I take VCP5 review the earlier to avoid the review update/update/change? or don't have to hurry because vSphere 5.1 will not affect the current review of the VCP5?

    Thank you very much for the advice,

    Minh

    This question comes up every time VMware a minor version of vSphere, and the answer is that PCV tests are independent of minor versions. VCP510 is the exam for VCP for vSphere 5, not 5.0 or 5.1.

    The certification team go through each of the questions in the pool for the review and ensure that each item is valid for all minor versions. Unless VMware publishes a new examination plan that specifically call 5.1, you can continue your preparations you are today.

  • I want to change your security questions and do not know the old issues and thank you

    I want to change your security questions and do not know the old issues and thank you

    If you have an emergency email address you can use to reset your questions. This option of rescue should be on https://id.apple.com after connection and asked for security issues. If this is not leading to a solution, call Apple: Apple for support and service - Apple Support Contact

    Be prepared to identify you as the account holder. They will ask you some things, I can't predict what, but usually the serial numbers or credit card.

  • Hide: I went to my documents and I had this issue, and I clicked on something that is called HIDE and I don't know how to get to this file now!

    I went to my documents and I had this issue, and I clicked on something that is called HIDE and I don't know how to get to this file now! Anyone know where are the hidden files?

    Go to start / Control Panel / folder Options / view and check the box to show the hidden files and folders and uncheck to hide extensions of known file types.  Only the first is required for this problem, but the other may be useful later and you might as well do it while you're already here.

    Now, you will be able to see the folder.  It will be in the same place, it has always been (it has not been assigned) - it was just hidden and now that you can see hidden files and folders you can see again.  You may notice that it deteriorated a little bit lighter that other records - it is a sign that it is a hidden file or folder.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • What are the issues and how can I put the documents in the files?

    As usual; Oracle is absolutely horrible in providing any kind of basic instructions on the use of the products.

    I need to upload files to a structure (don't care if it's collections, folders, or in mason jars as long as it works) and be able version them and seize those I want.

    I managed to get a variety of things to work with the genericSoapService (cannot use the API in accordance with local policy), but everything I check in goes in (don't know where)

    I don't think I'm even asking the right questions because my web researchers increase irrelevant results.

    What are the issues and how can I put the documents in the files?

    I created a few files like this:

    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ucm="http://www.oracle.com/UCM">
   <soapenv:Header/>
   <soapenv:Body>
<GenericRequest xmlns="http://www.oracle.com/UCM" webKey="cs">
<Service IdcService="FLD_CREATE_FOLDER">
<Document>
<Field name="fParentGUID">C976021E28DD8B26FB2D437B5BF56B7F</Field>
<Field name="fPath">/RAFT/Appraisals/</Field>
<Field name="fFolderName">0111234567</Field>
<Field name="fSecurityGroup">RAFT_ADMINGrp</Field>
</Document>
</Service>
</GenericRequest>
   </soapenv:Body>
</soapenv:Envelope>

    Here's a sample call:

    The virtual path is/Appraisals/0111234567 /.

    The GUID for this folder is CBF8EF9C59F8A6C84EB31C68F0903399

    I see the reference to xCollectionID when I look for answers, but the data is not available for me (see the output below)

    When I run this it stores the file but the file does not appear in the folder.

    <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ucm="http://www.oracle.com/UCM">
     <soapenv:Header/>
<soapenv:Body>
<GenericRequest xmlns="http://www.oracle.com/UCM" webKey="cs">
<Service IdcService="CHECKIN_UNIVERSAL">
<Document>
<Field name="fFolderGUID">CBF8EF9C59F8A6C84EB31C68F0903399</Field>
<Field name="dDocType">Document</Field>
<Field name="dSecurityGroup">Public</Field>
<Field name="dDocAccount"/>
<Field name="dSecurityGroup">RAFT_ADMINGrp</Field>
<Field name="xFHACaseNumber">0111234567</Field>
<Field name="xFHADocumentType">Appraisal</Field>
<Field name="dDocTitle">tuesday2document.txt</Field>
<File name="primaryFile" href="whereami.txt">
<Contents>dGhpcyBpcyBteSBkb2N1bWVudA==</Contents>
</File>
</Document>
</Service>
</GenericRequest>
</soapenv:Body>
</soapenv:Envelope>

    Returns:

    <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
   <env:Header/>
   <env:Body>
      <ns2:GenericResponse xmlns:ns2="http://www.oracle.com/UCM">
         <ns2:Service IdcService="CHECKIN_UNIVERSAL">
            <ns2:Document>
               <ns2:Field name="reserveLocation">false</ns2:Field>
               <ns2:Field name="IdcService">CHECKIN_UNIVERSAL</ns2:Field>
               <ns2:Field name="dSecurityGroup">RAFT_ADMINGrp</ns2:Field>
               <ns2:Field name="dpTriggerField">xIdcProfile</ns2:Field>
               <ns2:Field name="dDocType">Document</ns2:Field>
               <ns2:Field name="scriptableActionErr"/>
               <ns2:Field name="xPartitionId:isSetDefault">1</ns2:Field>
               <ns2:Field name="xWebFlag"/>
               <ns2:Field name="dDocCreator">C03999</ns2:Field>
               <ns2:Field name="dDocAccount"/>
               <ns2:Field name="xClbraUserList"/>
               <ns2:Field name="dLocation"/>
               <ns2:Field name="xWCPageId:isSetDefault">1</ns2:Field>
               <ns2:Field name="dWebExtension">txt</ns2:Field>
               <ns2:Field name="isNew">1</ns2:Field>
               <ns2:Field name="IsQueryObjectPersistent"/>
               <ns2:Field name="xWCTags"/>
               <ns2:Field name="LockedContents1">dDocName:WCC_Cluster-001208</ns2:Field>
               <ns2:Field name="dClbraName"/>
               <ns2:Field name="dCreateDate">10/7/14 8:58 AM</ns2:Field>
               <ns2:Field name="xClbraAliasList"/>
               <ns2:Field name="dActionMillis">72487502</ns2:Field>
               <ns2:Field name="StatusMessage">Successfully checked in content item 'WCC_CLUSTER-001208'.</ns2:Field>
               <ns2:Field name="dIsPrimary">1</ns2:Field>
               <ns2:Field name="isInfoOnly"/>
               <ns2:Field name="dActionDate">10/7/14 8:58 AM</ns2:Field>
               <ns2:Field name="xWCPageId"/>
               <ns2:Field name="xLibraryGUID:isSetDefault">1</ns2:Field>
               <ns2:Field name="dDocID">1216</ns2:Field>
               <ns2:Field name="dPublishState"/>
               <ns2:Field name="xFHACaseNumber">0111234567</ns2:Field>
               <ns2:Field name="doSorting">0</ns2:Field>
               <ns2:Field name="primaryFile">whereami.txt</ns2:Field>
               <ns2:Field name="dRevisionID">1</ns2:Field>
               <ns2:Field name="xExternalDataSet"/>
               <ns2:Field name="scriptableActionFunction">determineCheckin</ns2:Field>
               <ns2:Field name="UseForwardOnlyCursor"/>
               <ns2:Field name="noDocLock">1</ns2:Field>
               <ns2:Field name="dID">1208</ns2:Field>
               <ns2:Field name="xWCTags:isSetDefault">1</ns2:Field>
               <ns2:Field name="xPartitionId"/>
               <ns2:Field name="xComments:isSetDefault">1</ns2:Field>
               <ns2:Field name="dInDate">10/7/14 8:58 AM</ns2:Field>
               <ns2:Field name="dDocOwner">C03999</ns2:Field>
               <ns2:Field name="dUser">C03999</ns2:Field>
               <ns2:Field name="isDocProfileUsed">true</ns2:Field>
               <ns2:Field name="scriptableActionParams"/>
               <ns2:Field name="dpEvent">OnImport</ns2:Field>
               <ns2:Field name="xExternalDataSet:isSetDefault">1</ns2:Field>
               <ns2:Field name="dDocLastModifier">C03999</ns2:Field>
               <ns2:Field name="DocExists"/>
               <ns2:Field name="dConversion">PassThru</ns2:Field>
               <ns2:Field name="StatusCode">0</ns2:Field>
               <ns2:Field name="xStorageRule:isSetDefault">1</ns2:Field>
               <ns2:Field name="dStatus">DONE</ns2:Field>
               <ns2:Field name="dOriginalName">whereami.txt</ns2:Field>
               <ns2:Field name="dRevClassID">1208</ns2:Field>
               <ns2:Field name="idcToken"/>
               <ns2:Field name="dRevLabel">1</ns2:Field>
               <ns2:Field name="dDocName">WCC_CLUSTER-001208</ns2:Field>
               <ns2:Field name="xWCWorkflowApproverUserList:isSetDefault">1</ns2:Field>
               <ns2:Field name="xStorageRule">webasset</ns2:Field>
               <ns2:Field name="localizedForResponse">1</ns2:Field>
               <ns2:Field name="dPublishType"/>
               <ns2:Field name="fFolderGUID">CBF8EF9C59F8A6C84EB31C68F0903399</ns2:Field>
               <ns2:Field name="dFormat">text/plain</ns2:Field>
               <ns2:Field name="scriptableActionType">3</ns2:Field>
               <ns2:Field name="dDocTitle">tuesday2document.txt</ns2:Field>
               <ns2:Field name="dpAction">CheckinNew</ns2:Field>
               <ns2:Field name="primaryFile:path">/opt/oracle/work/wcc_cluster/ucm/cs/vault/~temp/1963032402.txt</ns2:Field>
               <ns2:Field name="refreshMonikers"/>
               <ns2:Field name="xWCWorkflowAssignment"/>
               <ns2:Field name="isEditMode">1</ns2:Field>
               <ns2:Field name="refreshSubMonikers"/>
               <ns2:Field name="xFHADocumentType">Appraisal</ns2:Field>
               <ns2:Field name="changedMonikers"/>
               <ns2:Field name="dRevRank">0</ns2:Field>
               <ns2:Field name="StorageRule">webasset</ns2:Field>
               <ns2:Field name="xWCWorkflowApproverUserList"/>
               <ns2:Field name="xComments"/>
               <ns2:Field name="dAction">Checkin</ns2:Field>
               <ns2:Field name="isDocProfileDone">1</ns2:Field>
               <ns2:Field name="xWebFlag:isSetDefault">1</ns2:Field>
               <ns2:Field name="dRawDocID">1215</ns2:Field>
               <ns2:Field name="xLibraryGUID"/>
               <ns2:Field name="StatusMessageKey">!csServiceStatusMessage_checkin,WCC_CLUSTER-001208</ns2:Field>
               <ns2:Field name="xIdcProfile:isSetDefault">1</ns2:Field>
               <ns2:Field name="dWorkflowState"/>
               <ns2:Field name="dProcessingState">Y</ns2:Field>
               <ns2:Field name="dDocCreatedDate">{ts '2014-10-07 08:58:07.482'}</ns2:Field>
               <ns2:Field name="dDocAuthor">C03999</ns2:Field>
               <ns2:Field name="dOutDate"/>
               <ns2:Field name="dIsWebFormat">0</ns2:Field>
               <ns2:Field name="scriptableActionFlags">12</ns2:Field>
               <ns2:Field name="isCheckin">1</ns2:Field>
               <ns2:Field name="RenditionId">webViewableFile</ns2:Field>
               <ns2:Field name="dExtension">txt</ns2:Field>
               <ns2:Field name="VaultfilePath">/opt/oracle/work/wcc_cluster/ucm/cs/vault/~temp/1963032402.txt</ns2:Field>
               <ns2:Field name="prevReleaseState"/>
               <ns2:Field name="isStatusChanged">1</ns2:Field>
               <ns2:Field name="dReleaseState">N</ns2:Field>
               <ns2:Field name="dWebOriginalName">WCC_CLUSTER-001208~1.txt</ns2:Field>
               <ns2:Field name="xWCWorkflowAssignment:isSetDefault">1</ns2:Field>
               <ns2:Field name="dDocLastModifiedDate">{ts '2014-10-07 08:58:07.482'}</ns2:Field>
               <ns2:Field name="dFileSize">19</ns2:Field>
               <ns2:Field name="xIdcProfile"/>
            </ns2:Document>
         </ns2:Service>
      </ns2:GenericResponse>
   </env:Body>
</env:Envelope>

    CBF8EF9C59F8A6C84EB31C68F0903399

    Replace fFolderGUID by fParentGUID

  • I already bought an Adobe Acrobat Pro DC with order number: 10617099159, but unfortunately, I made a mistake choosing the upgrade instead of the full version. I already made the payment of US$ 199.00. is there a chance to pay deference and get the ful

    I already bought an Adobe Acrobat Pro DC with order number: 10617099159, but unfortunately, I made a mistake choosing the upgrade instead of the full version. I already made the payment of US$ 199.00. is there a chance to pay deference and get the full version stander? Please advise.

    Do not worry, you must contact Adobe technical support, they will certainly check and assist you accordingly.

    You can simply cancel this order and then to order the full version.

    Contact the customer service

    [Click the button still need help and select the Chat option.]

  • Please help me to download the 13 elements, I all relevant issues and have tried several times but without success.

    PLEASE HELP ME TO DOWNLOAD ITEMS 13, I ALL RELEVANT ISSUES AND HAVE TRIED SEVERAL TIMES.

    Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If he continues to not try to use a different browser.

    PES 10, 11, 12, 13 - https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-downloads.html

    PE 10, 11, 12, 13 - https://helpx.adobe.com/premiere-elements/kb/premiere-elements-downloads.html

    You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

    Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

    Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

  • Sending information to the issuer and confidential form to a database

    I have an application form for an air show, can be seen here www.hollisterairshow.com/volunteerapp.php and when the user clicks on submit their information is added to a MySQL database and the user is redirected to a "thank you" page, this works very well and may be sufficient "such what." Try it if you want!

    I would try to improve it a little bit in two ways:

    1. View information of the volunteers submitted on the "thank you" page and/or
    2. Give the user the ability to send by e-mail a copy of their information on their own (it includes days they expect to be available, favorite activity etc.)

    The information that the user submits also includes personal information such as email address, phone number and mailing address and are therefore not accessible by anyone other than the issuer and administrator of aeronautics or me. I have a password protected to secure the area for the administrator to access all the info and it works fine. The primary key of the volunteer table is a "volunteernumber" which is a numeric field that is incremented by 1 automatically when recording is written in the table.

    So my concerns are:

    1. How to move the volunteernumber back to "thank you" page so that it is not visible to the user (if I used a URL parameter the user could see that they were, say, volunteers number 29 and it wouldn't take a lot of skill to change to a different number of volunteer and see someone other info)
    2. I think I read somewhere that the sending of an e-mail message can open me up to malicious attacks - not very likely, but still possible

    I would really appreciate a pointer in the right direction. I use DW CS4.

    Thank you

    Tony

    tonybabb wrote:

    -could there be a problem of formatting here or if I made another mistake?

    To use a session variable, page should start with session_start();.

  • NDA issues and copyright?

    Hi Oracle

    It seems that some Chinese sites distributing training Oracle that is legal? Or is it a NOA issues and copyright?

    the site in question is www.xxx.xxx/ shouldn\t this site closed or at least the materials removed?

    I would like to know if I should update this post by removing the site after Brian or another responsible for certification read the site name.

    Thank you.

    Published by: Hub on November 18, 2009 09:06

    Hub,
    You can send the information to [email protected]. Unfortunately, when we try to close these sites, they still operate within hours under a different name. Be specific in your complaint for fraud of OCP. They will also send some info on legal ORGANIZATIONAL unit to deal with.

    Thank you
    Brandye Barrington

  • dynamic disk recovery issue and I cannot make a primary partition

    I have to cover, please read in full before answering a few questions. This problem started when I made another (retractable) partition on my main drive to run another operating system in a duel start setting. I made this partition, then I think that all my partitions (including recovery) computer went to dynamic. I deleted a partition, so I'm not going on the max 4 so I could do a primary, but she's still dynamic (that I made). First of all, I want to be able to make a primary partition to boot another operating system, and how can I do this without deleting my recovery? I don't want to use 3 third party software, unless they are free. Since my recovery is now a dynamic partition, can 2nd question, I still make a recovery? 3rd question, if I have to delete everything to my basic primary partitions, then can HP gives me a way to backup the recovery, or a least a way to send a recovery disk. Also, when I made the partition, I deleted the HP tools which was 200 MB partition (I think, but I don't remember), how can I reinstall it? Or it is necessary. Overall, I need to make sure that my system windows 7 will be stable with recovery and use with dynamic partitions. In addition, I have not used this program, but I was looking at a problem with a program called HxD Hex, http://www.wilderssecurity.com/showthread.php?t=191006, I did not try this because it says this sector 0 1 2 location of the partition I tried to do a primary (Hex) actually says 4f instead of 42. ANY HELP WILL BE AMAZING! At least tell me my system can be stable with a dynamic partition, and I can repeat once if something goes wrong.

    HP Pavilion DV7 4060us

    OS: Windows 7 Home Premium 64-bit

    RAM: 4 GB

    Processor: AMD Phenom II N830 Triple Core Processor 2.10 GHz

    ATI Mobility Radeon HD 5650 2676MB Total

    Him did not have a hardware upgrade.

    Yes HP recovery disks will change back, but the question is that HP Recovery Manager will not be able to burn recovery discs, or perform a system partition recovery until the hard disk is converted back to base. At least this is what I've seen other posters.

    Seems (to me anyway) the only option is to use the software I mentioned above and convert back to basic & burn recovery discs or order from HP recovery discs.

    Once you have the laptop to factory specs_use Daniel's Guide to create your new partition.

  • brush lag issues and latency with the Brush tool

    Since the update I have problems of serious lag with my brush tool. I can't draw anything, because the program can not deal with my shots. I have a very capable office; What gives?

    Hello

    We have published a 19.0.1 hotfix that resolves this problem in discussion on this topic. Please apply the patch to your creative cloud application. The creative cloud application checks the update once a day, so you may see the update immediately.  If you want to force the check for an update at the beginning please logout and log back into the creative Cloud application.

    Link to 19.0.1 release notes: https://helpx.adobe.com/illustrator/kb/illustrator-cc-2015-crash-bug-fixes-19-0-1.html

    If you continue to see any questions send us an e-mail to [email protected]

    Kind regards

    Ashutosh

    The name of the Illustrator team engineering

  • How to remove the "Firefox updated" and come back as it was before I upgraded?

    I don't want to change my security settings to allow Firefox to connect to the internet. I was perfectly happy with the Status Quo. Took a chance on the 'upgrade' and now I regret it! Why make my life miserable, trying to improve my life... never happened! Please, change it back!

    Hi, this article - install an older version of Firefox should help you, but please work/read through it carefully before the decommissioning, and note that an older version may put your safety at risk.

    Hope that answers your question.

  • iPhone 6: gap between logic and the back casing?

    Short version of the question:

    Is there a small space between the logic board and the case back? Or the logic board is based directly on the back casing?

    Long version:

    There is a small hollow at the back (about a 10th of a millimeter) - dealing with the location of the logic board. Could that have damaged the system board?

    In my case the iPhone stopped working about 4 months after the appearance of the tooth. I was updating to the most recent (9.3.2) iOS and then wifi stopped working (in gray). Reset, restore and downgrade back to iOS 9.3.1 didn t solve the problem, so I updated to iOS 9.3.2. After this wifi update yet luckily work. Then I unplugged the computer and after a few seconds it turns off its own. When I tried to restart it, it got stuck in the start screen. I restored it again, wifi still doesn't work do not. I turned it off but it is stuck in start again everything trying to restart.

    The Apple-entrepreneur who sold me the Unit 5 months ago, accusing all 4 months 10 old of a dent deep millimeter on the rear housing. They came to this conclusion with the research outside of the phone. Nobody took part to check whether this conclusion is in fact real or not.

    Thanks for your help!

    Drop the phone can damage the material inside the device, which may result in hardware failures.

    But, given that users are not supposed to open the phone, it is rather difficult to say where the exact location of the logic board is or should be.

    Maybe you should consider another Apple authorized service provider and have them check the phone, or visit an Apple Retail Store near your place.

    But, because dropping the phone is not covered by the warranty, you will need to pay for it or their replacement.

    Find an Apple authorized service provider

    Make an appointment at the Apple Store

Maybe you are looking for