Satellite L500 did not Recovery Disc 2

Similar Questions

• Satellite L500-12 q Recovery Disc Creator Error

  Hello

  I have a laptop Satellite L500-12 q. I used the Recovery Disc Creator to make recovery disks. It needs 4 discs. The 1st was writtenk ok, but on the second, towards the end of the current status, it stopped advancing. It's almost an hour, and it is still not finished. I'm on the second try. The disc is spinning and the drive makes noise as if it was written, but it does not advance at all.

  Please, could you help me?

  Thank you
  Claudiu

  Claudiu Hey,.

  What kind of DVD that you use to create the Toshiba recovery disks? I got also some problems to create a recovery disc but I changed DVD + R, DVD-r media and everything was ok! I used Verbatim discs to create because I have really good experience with this kind of discs. In addition, it seems that TDK discs also work quite well. Check this box!

  If it doesn't work check the Toshiba page for an update of the firmware of your WEIRD!

• Satellite L500 - cannot create recovery discs - 0D00F6-49-00000001 error

  Hello

  My pc start up after that I did a system restore. For example, I can't use the function fn key.

  Last week I tried to format my pc. But when I opened the TOSHIBA Recovery Disc Creator got an untimely error 00000001-49-0D00F6.

  I've managed to create 2 4 DVDs. IM using Dvd - r from memorex.
  If anyone can help.

  Thanks in advance for your help.

  This is the first time that you try to create recovery discs?

  How you created 2 discs if the Toshiba recovery disc creator starts by mistake?

  Anyway, in this forum you will find similar topics. No doubt some recovery file is damaged, and the drive could not be created.
  I put t think that there is something that you can about it. Either it works or not. Maybe you should contact the nearest Toshiba service and explain the situation. I hope they can help you with this and disc Toshiba DVD original to order for you.

• Bluetooth on Satellite L500 does not work!

  Hey well im disappointing defetly of Pentecost suport of toshiba, they never anwser mi email, and when I call for the support that they did not fix the problem mi! After 2 monthas waiting they never remember!

  My Bluetooth on Satellite L500 does not work! I have upgraded from vista to 7 suport said that I probably had to put the Vista pc again to install the bluetooth, and upgrading them to 7. IM whit vista of Pentecost after using the restore cd.

  After that I read some post and install the drives still does not work!

  I try to install bluetooth monitor, then the battery Bt when battery is installing wask me to activate the bluetooth I use Fn + F8 and the battery does not install it!

  Any tips?

  Just do so for sure:
  You have enabled your wireless switch?

• Satellite advertising L870 3 recovery discs - do not have

  Hi all

  Apparently, someone can tell me how to get the recovery disks when I bought my laptop it says make recovery discs I did but he only made 2 and now requires a third drive...

  It came with win 8 installed and do not know if it is because of the accident

  Satellite L870-18 t

  Thanks in advance

  Rod.

  Looks like something went wrong during the creation of the recovery disc.
  Don't know why, but if you want to get a recovery disk, you can do so here:
  http://backupmedia.Toshiba.EU/landing.aspx

• Satellite L500-128 using recovery on the new (larger) HARD drive discs

  Hi all

  I have a Toshiba L500-128, the original 320 GB hard drive is just too small and I would like to avoid buying an external hard drive (for backup purposes), because in my experience, they are just rubbish and I want that all my data on the laptop.

  I wanted to buy a new hard drive 1 tb (maybe 2) put into it, I guess it is equipped to deal with, (Please someone correct me if they know otherwise) with 4 GB of ram...

  In any case I am really wondered, whether or not I can get out with the help of my new hard disk recovery disks.
  If they did it the old-fashioned way (sending an OS disc and a disc of pilots) I wouldn't even question, but as I created disks of the computer itself, I wasn't too sure when I opened the drives upward to make sure all burned on them ok, I never saw something like what I expected.

  Also, I read somewhere that someone else has tried it and it didn't work, they assumed because the recovery included an image specifically to fit the original hard drive size?

  Can someone enlighten us all please?

  Thank you

  Hello

  First, you must create the Toshiba Recovery disk using the Toshiba recovery disc Creator called pre-installed tool.
  Usually, you should receive a confirmation message that the recovery was created successfully.
  This means that you can use this disk to restore the laptop to factory settings is not serious what HARD drive is in use.
  This means that the recovery disc should work with the other drives.

  But note; This recovery disk using would format the HARD drive and remove all HARD drive partitions. But this should not bother you if you use the disk HARD vacuum ;)

• Satellite L500D PSLK0A Toshiba Recovery Disc Creator does not work properly

  Hello

  I am trying to create a recovery for my Toshiba Satellite L500D PSLK0A-00U009 disc.
  When I run the Recovery Disc Creator he starts to open then it comes up with a box with an exclamation point, he says: 'cannot open target partition. Then the recovery disc creator will open. It seems normal, then when I insert a CD for the process seems to work then it says error and stop and ejects the CD, the error is that the code is: 0E01B5-26-510444 D 9

  I already uninstalled and then program then reinstalled with the help of a download from the Web MyToshiba site and this has not fixed the problem.

  Any suggestions?

  Hello

  Have you tried different discs from different manufacturers?
  How about you, USB flash memory usage? AFAIK, you can create a bootable Recovery USB flash stick too.

• Satellite L500-1DT: HDD Recovery of Win 7 is stuck in an endless loop

  It's a so detailed bug report please bear with me.
  If you can help, or can confirm that you have had the same thing happen to you, I will be grateful.

  I've owned several Toshiba laptops before and I've even worked for Toshiba so worry, I like the machine. But I have a problem with his recovery software. I just bought a laptop Satellite L500-1DT with Windows 7 64 bit, on behalf of a non-techie who lives elsewhere. Since I know from experience that I have to sometimes panic calls from field in the sense of "it became too slow", "How do I get rid of the accumulated junk", "maybe he had a virus" and so on, the first thing I checked was ASR, which is how to bring the HD to "like new" condition.

  So I started out in the machine, replied to the questions until I got in the appropriate operating system, then led the program "make a recovery DVD. Double layer DVD checked ok. With the freshly made DVDs, I swapped the HD for a spare part, I had (much less: only 40 GB instead of 320) and started the rescue DVD hoping it would fix my own system to the blank disc.

  He did repartition the drive according to its schema, with more or less half the space for Windows and the other half for the data, including the recovery files. He did install the system in the Windows partition. It was then restarted in Windows 7 installed in order to complete the installation. There, the trouble began: an endless loop of reboots for hours until what I stopped it.

  Loop:
  * reset
  * black screen with bright logo 4 color windows «windows startup»
  * black screen with slight blade and "Setup prepares your computer for first use.
  * blue white screen "Welcome" with "please wait" and the crossbar with green blob, saying "the installation may take several minutes. Please do not interrupt or shut down the computer! »
  * blue screen saying it stops

  Repeat the above forever.

  I saw him restart way more than 10 times over several hours. And whenever he's faking, that this is the first time she did it. Of course, this is not normal!

  I tried to stop with ctrl-alt-del and the Task Manager, but the white screen would go even the Task Manager, making it difficult to kill any process or even inspect what they were on top. I stopped it by holding down the power button until it shuts. Then when it restarts it said that if I wanted safe mode. I tried. He went into the routine above and at one point he says that he could not proceed with the installation, if it was in safe mode. So he restarted in normal mode and then...! It is finally out of the endless loop!

  Then he asked me all the usual language, record etc., questions as he did the first time I had turned on him. This seemed good. Finally, I walked into a newly installed operating system and everything seemed fine, except that I found out later that some programs that were there before were not installed.
  With bravery bordering stupidity (*) I even Redid the procedure hard disk provided instead of my rescue: first I have nuked the windows partition, then I save the HD (with F8), not with the DVD that I had done. Result: similar rigmarole, with endless reboot.

  After that I stopped it, it kind-of-worked, as above, but now some programs were lacking, such as the Toshiba DVD drive.

  (*) motivated by: better try now with the computer here and all my tools and other computers ready at hand, that when the computer died at home of its owner, and that's the only thing left to try with me at the other end of a line call. Been there before.

  Now, that specific (DVD player), that I could download it from the support page and it installed fine. But what else might be missing or not working not that I have not noticed? The restore process is clearly not working as it should.

  I'm the first or only to whom it happens? I'm doing something wrong? Is there anything else I should try?

  I need to make sure that the restore procedure works perfectly while I still have the computer in my hands. If not, there is no chance that I'll be able to do a remote reinstall for my non-techie, once I asks me to clean the laptop by phone a few months from now.

  Thanks in advance

  [Update: just looking for the right place where I could post what I found that other people report the same problem.] This is definitely a bug in the software distributed for W7 - 64 overlay, not a problem isolated to my machine. See for example
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=49421&TSTART=0 where the user kwarc described the same symptoms with a Satellite L505.

  Hello

  First of all, I must say that I could recover my trouble free unit.
  The installation of Win 7 went well and everything has been installed correctly.

  Back to you:
  To me it looks like something wrong with installation maybe some HARD drive partitions were confues perhaps, HARD drive should again formatted, and then run the recovery procedure.
  You should test

  Regarding the DVD player:
  As much as I know there is no DVD player for Win 7 64 bit. There are only available for Win 64 bit updated. If you need to install the DVD player for Win 7 32 bit version and then update using the patch released for Win7 64 bit.

• Satellite L500-1XC HDD Recovery help

  Hi I have a Satellite L500-1XC of second hand, the former owner has installed Ubuntu (which I can't access because of password) as well as windows 7 and I try restore laptop to factory settings, but I just don't know how.

  I tried to turn it off and holding, then 0 and pressing the Start button. On the bottom of the home screen says HDD Recovery at the bottom left of the screen, but after that, he just the part of the selection for me to choose Ubuntu or Windows 7 and then just charge the laptop as usual.

  I tried to get the Recovery Media Creator, but I'm not. It seems that a lot of original Toshiba Utilities and supports have been removed.

  If anyone can help me fix this laptop, I'd be so grateful that I can not really afford to buy a Toshiba Recovery disk.

  Thank you

  > I'm trying to restore the laptop to factory settings, but I just don't know how
  I put t I think that HARD drive recovery would work because Linux has been installed on the HARD drive and I think that the partition table has been changed.
  This might be the reason why the HDD recovery isn't working.

  You can always see this Toshiba document that describes the whole HARD drive recovery procedure:
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm

  So now, drive HARD recovery does not work in this case, you can only use the installation disc.
  You can try to install Windows 7 using the Microsoft disk (Toshiba drivers are downloadable) or you order the disc of Arvato:
  http://backupmedia.Toshiba.EU/landing.aspx

• Satellite A505-S6005: creating recovery discs power calibration error

  Hello

  just bought a satellite A505-S6005 and try to create recovery discs.
  I am using Dynex DVD - R.

  He created the 1st disk after the slightest mistake 2 times and when I started the 2nd drive continued to get again the message that is OE01BS-26 error Code - 2 said A 037303 power calibration area error occurred, check the disk for dirt or scratches.

  The disks are not scratched, and after going through 5-6 discs wonder if something is wrong with the optical drive & not the disks.

  Any help appreciated.
  Thank you.

  Hello

  I think it's a problem with your DVD media
  You are using incompatible disks!

  Try different DVD from different manufacturers.
  I m using the Verbatim or TDK DVD-R and my CD/DVD drive handles these discs without problem.

  Check it! I'm sure this will help you!

• Satellite A300 - displays error recovery disc creator

  Hello

  I have a Toshiba Satellite A300 (PSAGCE) and I created the recovery by using the "TOSHIBA Recovery Disc Creator' disc but I did this a few months ago, but now the disc is scratched, and when I am formatting my computer it gives me an error when loading files. So I decided to create another disc, using the "TOSHIBA Recovery Disc Creator', but she also give me an error with one of the files during the creation of the disc. What should I do now?

  I have a friend who has a Satellite A200, can I use the disk? I did a printscrean showing the error. Sorry the bad English, I'm Portuguese...
  [http://img199.imageshack.us/img199/4030/semttulovj.jpg |]

  Hello

  It is good that you posted a screenshot of the error, but perhaps you can translate it into English, it would be more useful.

  In any case, the disks that you use to create the recovery disk? I m using Verbatim DVD-R media. It worked perfectly for me and I can recommend this path.

  In addition, you can see the Toshiba page for an update of the firmware of your CD/DVD drive.

  Finally and above all, I doubt that for Satellite A200 recovery disk will work for you also. The models are different

• Satellite L350-17Z: Question recovery disc creation - problem with calibration

  I'm eager to get win xp instead of vista current on Satellite L350-17Z because some soft is not stable and vulnerabilities, while under xp on the desktop computer, I had no problem. XP compatibility mode is not solve this problem.

  So I decided to do it in a cruel manner as a laptop is new and almost empty, not to mention the habit of hard drive xp. Still I tried to make a recovery, using TOSHIBA Recovery Disc Creator.

  Buta * during DVD burning there is a fault and message about some problems with the calibration. I tried a few discs - same result.

  Hi Snen,

  It would be interesting to know what CD/DVD drive you have. Maybe you should try to update the firmware of the drive. For some readers of Toshiba and Pioneer, the site shows an update of the firmware. It s worth a try!
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  And what kind of DVD that you use to create a recovery disk? I have good experience with the types of DVD - R and I use Verbatim.

• Satellite L500 will not load beyond the screen "Welcome".

  Hello

  My Toshiba Satellite L500 laptop will not load beyond the screen "Welcome". The right slider thing keeps going around and around, but won't on my desk.

  Last night, he went into a temporary profile and he got a message saying "another profile cannot load at this time please try again later".

  Any help would be greatly appreciated.
  Thank you
  Kara

  The error message is not known to me and also looking in google didn t get advice.
  Maybe your Windows operating system is confusing upward.

  Have you tried to boot Win 7 in safe mode?
  Try this. Restart your laptop, press the F8 key.
  In advanced startup options, select the option called Mode without failure.

  If the laptop does not start Safe Mode, try the last good known Configuration option.

  If this n t help, try to fix my computer. Here, you can choose between different settings.
  Who could solve that problem is HARD drive recovery that helps you define the notebook to factory settings. But it also means that your disk should be formatted!

  So be aware of this!

• Satellite M70 - cannot install recovery disc

  Hello

  I had to remove the drive HARD Toshiba Satellite M70 for use on my Compaq laptop (Compaq HDD crashed). I had to install XP and other stuff after you have 2 left and used with a Compaq laptop with no problems. Now, I had a new HARD drive for compaq and fixed the Toshiba HDD back in.

  Using the recovery CD I wanted to restore the Toshiba to its original state.

  I have the recovery DVD-ROM product. F12 abd selection cd/dvd would not recovery.
  Error loading operating system is the message I get.

  I can even install with my other XP pro original cd.

  Once I put the HARD return drive to Compaq its job very well, I can even install XP.

  What is the cause. Is that it has nothing to do with the MBR?
  I am very familiar with computers so please give me a way out of this!

  Thank you all,.

  Kind regards

  Hello

  In my opinion, the case is clear. If you install the laptop with a normal installation of Microsoft disk and the HARD disk works fine in another computer it something wrong with the Toshiba Recovery disk, maybe it s scratched.

  What you can do is to install the laptop using the disc of Microsoft. Then download and install all the drivers from the Toshiba site.

  Alternative order you a new drive for recovery of an authorized service provider.

  It of your choice what you do. ;)

• Re: Satellite A300 - error creating recovery disc

  I'm not really providing any solution, but is facing a similar problem with my laptop Satellite A300-1EI, bought in Dubai, UNITED Arab Emirates. I tried to make records of recovery through Toshiba Recovery Disc Creator. However, each time, I got an error message. I tried with Verbatim, Philips DVD-R and lost several DVDs. Meanwhile on the net surfing, I discovered that the engraver of DVD from Toshiba is a little sensitive and try to use Verbatim DVD - R brand. I tried with Verbatim 2 days and at the last moment when I was about to dance with joy that the first DVD is created, received an error like below

  * "The following issue occurred during the recording of the data of the disc.*
  Current process will be stopped.*

  * A power calibration area error occurred.*
  * Please check if the disc is scratched or dirty.*
  * If Yes, please try again with a new disc.*

  "* (Error code: 0E01B5-26-00037304)."

  I don't really understand the message. Can advise you on how to create the recovery disks.

  Kind regards
  Vijay

  Hello

  To me, it seems that the used DVD discs are not completely supported by ODD.
  It seems to be a compatibility issue.

  I had this problem in the past, but I could resolve it using another DVD from another manufacturer.
  I had a good experience with TDK DVD-R.
  Using the R disk I was able to burn the disc, but using the + R I received an error message.

  See you soon