Example: ENVY, M7K39AV: my 1 month old FANCY turns off

Similar Questions

• HP ENVY 4520 all-in-one: HP ENVY all-in-one 4520 can't turn off

  I can't turn off my printer, it enters mode "Eve" only.  I press the power button, it comes to life, tap again and ensure that as soon as the switch mode.  Any help would be appreciated.

  Hi @Freckles60,

  Welcome to the Forums of HP Support! I see that you have problems with putting off the printer. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Do a hard reset of the printer.
  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  I would say for updating the firmware of the printer, to see if that can help, printer All - in - One HP ENVY 4520

  Select your operating system.

  How is the printer connected?

  What operating system do you use? How to find the Windows Edition and the Version on your computer.

  Please let me know the result and if there is anything else I can help you. Thank you.

• Envy 15 laptop: laptop computer will be turned off completely

  I have installed a number of patches recommended by HP Support Assistant.  Now when my notebooks stops or goes into standby/sleep mode extended, the shutdown does not complete.  The power light turns on but the screen is blank and keys do not respond.  If I hold down the power button, nothing happens.  I have to remove the battery before I can restart the computer with the power button.

  I think it was due to the installation SP72045 (driver Intel Management Engine Interface (MEI)) or SP72853 (HP PC Hardware Diagnostics UEFI), the last installed.  I had recently installed 6 other corrections - tedious copy Wizard help screen unless it's necessary.

  Apparently saved by Windows troubleshooting of power 10!

  Followed by ch from the support page instructions - convenience store said there was a problem with the screen saver - I said fix.  Now, the system will stop completely and released the previous day.

• Logic board failure Mac Pro 3 months old

  I have a 3 months old Mac Book Pro 15 inch 516 g upper computer in line with Apple Care that is supposed to last me years and years to come.  In the night when you're done, I usually store it with 5% battery left.  Come out a few days later, and instead to get the Apple Logo 'Need to plug into the screen', I get this:

  

  

  Then I connect my Mac and everything goes back to normal.  When I saw this, I tried POOP my pants and threw up my dinner upward.

  So obviously, I went back to simply Mac where I bought, showed them the video and they said probably will not Board their diagnoses are down to return until next week so forth and so.

  I am extremely worried to have my new Mac being opened upwards and have parts replaced on an old computer on 96 day.  I called the Apple Support, they are not a substitute for a brand new computer.  I called a store that is two hours, they refused a request for replacement.

  If at this point, I guess I'm looking at 3 options and I need the best advice.

  1. consider at my local Mac simply who I am very suspicious about.  I was in the back of their store, and it is not the cleanest.  In addition, they do not have great turn around time.  Someone has simply Mac works on a MacBook Pro before?

  2 ride 2 hours, at the Apple store, make them fix I hope same day otherwise they reship (hopefully) or have pity on me and give me a new mac (what are the odds?)

  3. send it by mail?  Proving that he has problems in this way would be difficult because it takes leave the battery to 1% until it had its issues.  I have pictures and video even though evidence.  Also very wary about this option, we have expelled all new iPhone my husband 6plus and Fedex broke the entire screen and Apple refused to fix what was wrong with the microphone and then cover the repair of the screen.  After 3 hours of quite striking, they he replaced however.

  I called the Apple Support, they are not a substitute for a brand new computer.  I called a store that is two hours, they refused a request for replacement.

  It is the policy - you have only 14 days for return or Exchange, otherwise warranty repairs.

  Take in a test of "Apple Service Diagnostics" and ask specifically for the VST (video systems Test)

  Genius of booking http://www.apple.com/retail/geniusbar/

  Online https://getsupport.apple.com/GetproductgroupList.action

  check the warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

• My 8 month old iPhone 6s has battery problems...

  My 8 month old iPhone 6s began recently to close 20%, even 30% left of life battery.

  The LOAD icon comes in saying that it is completely flat when I know that it is not. If I start to load, it shows that there's a lot of life left in it.

  I am running the latest iOS and the time is updated automatically. My phone is defective? Anyone have any ideas? I would stay on the phone?

  Try recalibrating your battery meter:

  • Charges to 100%
  • Run the battery until the phone turns off
  • If it stops above 1% charge for only one minute, and then continue running the battery down. Repeat until it makes 1% before shutting
  • Load it back to 100%

  If the battery is defective, this should fix it.

  You can also check the battery using the autonomy application from the app store.

• My screen is clicking and my phone it 2 months old

  My screen is clicking and my phone it 2 months old

  Not enough information. What do you mean by ' clicking '? When you say it it only 2 months, where did you bought it? At an Apple store or FSAA provider?

  See you soon,.

  GB

• 21.5 inches a month old iMac had a pink line down the screen-oriented...

  21.5 inches a month old iMac had a pink line down the screen-oriented...

  Return it to the store for assessment.   It is in the warranty period of 12 months, so it could be replaced if you insist that you are in the United Kingdom.   Otherwise it is covered by your warranty and is either replaced or repaired according to the countries.

• HP Pavilion x 360: 6 month old HP Pavilion x 360.

  HP pavilions x 360 is 6 months old.  I stopped during the night and when I try to start the morning, it won't start unless I have plug into battery.  Also, when I leave it on standby the battery runs out.  Not really great with computers if you would keep it on the easier side for an explanation.  THX

  Hmmm
  I initially thought it was the battery based on the description, but like you said the battery is ok it probably isn't it.

  Best advice is to return to HP for repair under warranty because I am convinced that it is some kind of hardware problem.

  Kind regards
  James

• One month old WRT1900AC deteriorates, strange problems

  So I've upgraded to a WRT1900AC ago a month based on reviews and research online.

  The installer was not serious and performance seems to be what I expected, but in the course of the last week or two, there was a notable decline in performance and some strange WiFi problems.

  1 network devices list of devices meant to be connected via ethernet wireless.

  2. devices which were fortunately connected to the 5 GHz band will connect is more to it.

  3. a Macbook Pro, who played very well with 3 different routers suddenly does not connect to the WRT1900AC at all, but fortunately connects to my router Fortigate.

  4. make a simple change of last night caused to security wireless settings are totally disabled on the 2.4 GHz band, while the router status page has continued (Yes, authorized, cache, even looked at him from another pc) to insist that she had WPA2 PSK active.

  5 turn off both radios wireless via the browser has failed. 2.4 GHz non-secure radio continued to broadcast.

  6 restart did nothing.

  7. in general, throughput has significantly slowed - Dropbox, for example, provides the connection to a crawl during the synchronization.

  8. restoration of the default settings in the browser and then change SSID and password for my normal seem to have fixed things, but for how long?

  Not a fan of the interface.

  Background: mixed environment, Mac, Windows, Android, PS4, XBox, XBox 360. Living in such things as does another Member of the family.

  Should not be affected by these issues with a ~ $220 router - this isn't a model of consumption barebones but it seems not quite ready for primetime-I was wondering if I should be Exchange or return while I still can for a Netgear or maybe an Asus.

  Chiqui_T wrote:

  @Onslo

  Hope you could give us the chance to further assist you using our second level support team. You can send us an email to [email protected] with your details and the link to this post from the community as well as your user name. We want you to know that go to the bottom of it is just as important to us as it is to you. We will wait for you in your email.

  Chiqui-17359
  Linksys technical support

  No, I'm sorry not to be able to put the time in troubleshooting this but it seems rather unnecessary since there is no indication of a solution in the form of a firmware updated on the horizon and my time is valuable so (it is already packed) and I will replace it with a Netgear AC2600.

  PS: just before I packed it it became all 2.5Mbps down on the 5 GHz band. For that, I spent $220 and several hours of my time?

  PPS: I now call a customer of the company and tell them that the router, I recommended to them is not up to my expectations and they will probably return as their router, because they only had it for 2 weeks.

• I'm unable to access my new messages in Windows Live Hotmail. It shows only month old emails that are accessible.

  Hot Friday stopped mail today he says it's fixed.   I still can't.   It comes up with a month old e mail andi can not get any new e mails.   What is work?

  original title: hotmail work not today

  Hi MICHAELWOOLLEY,

  The question you have posted is related to Hotmail and would be better suited to the community of Windows live.

  Please visit the link below to find a community that will support what ask you:

  http://www.windowslivehelp.com/

• I have a G62-355DX laptop and is 11 months old. and it won't start. It has error codes

  I have a G62-355DX laptop and is 11 months old. and it won't start. There error codes when I do a test of the system. DST short: failure failure ID: RTX6T9-5B75S5-XD003F - S 60, 903.

  Product ID: XH068UA #ABA

  Hello

  As the error code relates to a short drive Self Test failure - the only real solution to this is to replace the hard drive.

  As your laptop is still under warranty, contact HP to make arrangements for the replaced disk.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• My laptop (Dell Inspiron only 3 months old) is displayed on an external monitor, but not on the laptop screen. I am running Windows 7.

  My laptop (Dell Inspiron only 3 months old) is displayed on an external monitor, but not on the laptop screen. I am running Windows 7. It was running and display very well last night. When I turned on this morning the monitor lit up but show just a gray-white screen and no office. When I attached an external monitor, I could see desktop and all other programs and Windows 7 routines seem to work very well.

  MB

  Press the Windows logo key and the p key, and then set up the PC to display on the built-in monitor only cycle through with the arrow key.  You can make this Store if you want - key Windows-p, right arrow once, paused for a few seconds & the laptop monitor should then appear normally.

  You can do so at the end of each session using the external display while you are ready for the use of the laptop on its own later.

• The second listener intake will not work. My DV6000 is one month old.

  The second listener intake will not work, but I get static when I plug my headphones in there. The other socket works well. I need help fixing it. My DV6000 is one month old.

  Hello

  Robert96 wrote:

  The second listener intake will not work, but I get static when I plug my headphones in there. The other socket works well. I need help fixing it. My DV6000 is one month old.

  One of the is for audio in and one for the audio output. Some versions of some have a plug S/PD/F. Chances are the reason why you get static is that if you connect a headset with a microphone jack, it will try to behave like a microphone. It will not work properly.

  Then. a summary. There is only a single take of earphone

  Best regards
  ERICO
  

• 17 - k250CA: HP won't turn on, tried the Hard Reset still nothing system is 9 months old

  Afternoon in the hope of getting assistance, I tried to call tech support 4 times they keep telling me they ship me a box to send them back up after fustrating many hours and days away I decided to reach out to see if there is something, someone can help me with this

  System ran great the next morning about 2 months ago, the computer turned off just when I go to re start it I get no respone so I have some research the other night on a HARD RESET I finished it now when I press the power button system starts then shows the HP screen and stops just out of luck and more now he lights Please note that in this case the led turns off even when the charger is always plugged

  If I unplug the charger and plug it back I will get the led on the demonstration we have power/charging with a orange place any help would be great I have I need this for my school project due and I spend a lot of money on this computer and the fact that technical support phone call to give me same run me tracking code so that it shows waiting for microphone and HP still 2 months now I just need this work yet once

  Hi @BigDanPtbo,

  I've increased your question to the appropriate team.
  
  Please take a moment to read the HP privacy policy at http://www8.hp.com/us/en/privacy/ww-privacy.html

  Please let me know if this help solve the problem by marking this post as accept as a Solution.

  Thank you.

• No battery detected on a month old Dell

  I have a new Dell less than a month. I noticed this morning that the icon says no battery detected. When I unplugged the power cable it will turn off. Battery is installed and worked fine so far

  Because it is almost brand new and should still be under warranty, you can call Dell technical support.  Enter information in the following link will direct you to the appropriate phone number: http://www.dell.com/support/incidents/us/en/19/Phone/PhoneTagEntry?c=us&s=dhs&cs=19&l=en