Example: Pavilion G4 1303 AU: RAM not fully use

Similar Questions

• Display on a monitor is not fully used. What should do?

  I recently bought a Mac mini (end of 2014)

  OS X 10.11.5 (15F34)

  I use a Samsung 19 inch monitor via mini display port to VGA.

  But the screen is not fully used (black on both right and left of the picture)

  When I go to about this mac > display, this is show 13.9 inch (800 x 600). I changed the resolution of 1280 x 1024 through the display preferences. But it is still not working and this mac > display, shows always 13.9 inch (800 x 600). The image is blurred.

  Help, please...

  You may need to buy a graphics card in order to use a different port on the computer.

  Check the display to see if there are other options of the signal may use another cable.

  A more recent model computer should be able to use a modern with Thunderbolt screen

  connections; Some cables with ends adapter for use with older screens may work

  If the display can be used in this way. Not all of the same works if an adapter may adapt to the form.

  • Apple Mini DisplayPort adapter: Frequently asked questions (FAQ) - Apple Support

  While I have two Mac Mini computers, one is a late 2005 and the other end 2012;

  both can use an HDMI adapter for a 19 inch Samsung works for these at full resolution.

  Mini-Display port to HDMI it works; If not, using lightning.

  One of my screens use one of these cards:

  Apple Mini DisplayPort to DVI adapter

  Some display models require pilots who would be obscure and not included with

  OS X; I have another Samsung that turns, it is supported but you must use a third-

  part control panel app in the old OS X 10.5.8 and OS X 10.9.5. The X OS

  controls brightness and resolution are limited without it.

  {Since the new Mac Mini is more beautiful with a movie theater 20 inch aluminum, it's what}

  He has; the older Mini OK with a Samsung 19 inch (square), and it uses

  control software for OS X settings cannot. Most recent can use Thunderbolt.}

  Not sure if your screen is oldest of those who may need a separate control software.

  There is a updated firmware for Mini Display Port to VGA (himself):

  On the Mini DisplayPort to VGA adapter firmware update - Apple Support

  If you see not all possible display resolutions in displays preferences

  It may be due to the absence of a favorite graphics card. Or a longer display limit.

  • The display of all the possible resolutions for viewing under Mac OS X:

  http://osxdaily.com/2015/08/27/show-all-display-resolutions-external-screen-Mac/

  • About the Mini DisplayPort to HDMI - Apple Support adapters

  You may need the machine support site to test technical research view if you

  not a page printed with line info specifications said. Several different adapters

  are available; You can even use a digital TV (limits) as screen.

  • Learn more about Troubleshooting display issues.
  • Learn what adapters are compatible with the specific Apple computers.
  • Learn more on Thunderbolt and displays ports.

  The technology of the adapter and display need to better match those of the Mini.

  Older tech display should be supported within the limits. Connections and drivers.

  PS: See if the update of the firmware of the adapter you have, will allow him to work.

  If the adapter is an Apple product, it would be able to accept the firmware.

  Good luck!

  edited 3 times

• Wide screen is not fully used (Win XP, Service Pack 3)

  Bought a Monitor wide screen LCD (Asus VE276Q) to replace my existing LCD display.  RGA is an entry.

  Problem: The wide screen is not fully used.

  Symptom: When starting, during Win XP Welcome screen, it seems that takes full advantage of the wide screen.

  But when he moved to the office (or a web page), about 3 inches on the left and right sides are not used.

  What I tried: play with the buttons on the monitor, but may not have to work.

  Question: How can I get Win XP to fully use the display on the big screen?

  Thanks in advance for your help.

  Skip

  Hello

  Check the screen resolution and screen resolutions, you can check the links that holds information about the same:

  Change the resolution of your monitor: http://windows.microsoft.com/en-US/windows-xp/help/setup/change-monitor-resolution

  To change your screen resolution: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/display_change_screen_resolution.mspx?mfr=true

• Example: Pavilion dv7-4142eo: Bios can not find my new SSD

  I used http://www.crucial.com/usa/en/systemscanner and chose the SSD which should be usable in my laptop

  MX100 crucial SSD 512 GB 2.5 "7mm.

  I have used Acronis and saved my old system to a 3.5 500 GB that I put in an Icybox with esata.

  (Another method may be to use usb2 and clone the HDD of old to the SSD but with acronis and usb2, it would take 5 to 6 hours and so I have not tried this.)

  The Acronis cd boot I found the SSD and Esata and restored the backup of the old harddrive (from esata) for the SSD.  It seemed to work fine, but when I tried to start without the boot cd, I got the message "insert a boot disk".

  The I looked in the bios and could not find any hard disk (SSD).  Now, I'm out of ideas and hope for help here.

  My bios is titled: InsydeH20 Setup utility

  Below (details):

  The F.14 BIOS version

  Editor BIOS: Insyde

  I have a newer version of the bios?

  How can I upgrade the bios version?  As I already only the SSD into the laptop, should I put in the old hard drive before I can upgrade the bios or is it possible of this from a USB hard drive and running windows?

  I think I find a newer bios's http://forum.notebookreview.com/hp-pavilion-notebooks/595505-current-hp-pavilion-bios-releases.html

  This? ftp://ftp.HP.com/pub/SoftPaq/sp49501-50000/sp49569.exe

  My prosessor is AMD Dual Core IIP340 2.20 GHz prosessor.

  I solved the case.

  Method:

  1. 2010 upgrade to the latest bios

  2 SSD connected with usb2 laptop.  The driver has been installed.

  3. Acronis used to start the cd

  4 SSD equipped laptop thei

  5. connection with the old HDD Usb2

  6. start with the acronis cd

  7 cloning in the menu of acronis (from hard disk SSD) stop when finished

  8 turn off again the og boot cd

  Now I have 7-8 seconds before you see the password field and another 7-8 seconds before the end of the beginning.  5 sec to close.

  Fantastic.

  Thanks for any help.

• Example: Pavilion G4-1303: remove bios password

  Hi, I'm not remove my laptop administration paas Word... my password - 9027

  Hello

  If you know the current password, you can delete it as follows.

  Shut down the laptop.  Now on TAP the ESC key as soon as you press the power button to access the start menu, then select f10 to open the Bios menu.  Use the arrows to select the Security tab and press ENTER.  Use the arrow keys again to highlight the power on password and press ENTER.  Enter the current password and then the new password, simply leave this blank and press on enter - do the same for the confirmation field.  Press f10, select this option to save the new settings and press to enter.

  If you do not know the current password (or doesn't) then at the password screen, press enter 3 times and you will receive a 'code to stop' - post returns with this code.

  Kind regards

  DP - K

• Pavilion p6787: SSD upgrade is not fully optimized

  Hi all

  I have c - b {with two monitors} microprocessor, p6787 HP Pavilion AMD Athlon (TM) II X 4 840 T processor, motherboard is 2 A 92 1.01 and BIOS 6.09

  I recently upgard the SamSung 850 EVO 500 GB hard drive.

  I have two quick questions please:

  a. is the card mother compitable with SATA 6.0 GB/s data cable?  I read that the lack of optimization results of original data cable.

  b. is it possible for this motherboard to handle both the new SSD and the old hard drives internally?

  Sorry for all these questions.  This is my first time to look inside the box.

  Thank you

  Hello

  1 SATA III is compatible with SATA II backwards so the answer is Yes, but it works to speed SATA II.

  2. the answer is Yes.

  Kind regards.

• Example: Pavilion ac123tx: hosted network does not start

  in my computer hp laptop ac123tx (preloaded with win 10 OS) not able to start the wifi hotspot because it lacks the virtual network adapter hosted Microsoft. I tried to start the hosted network from cmd prompt, but every time it gives message hosted network could not be started. The group or resource is not in the correct state to perform the requested operation. what need have the solution to this?

  Hello @gbnavapara,

  Thank you for visiting the HP Forums! The Forums are a great place where you can find solutions for your problems, with the help of the community!

  I read your post about the WiFi problem and wanted to help you!

  Have you tried activation of the adapter in the Device Manager?  You can use the resources here to help: difficulty The Hosted network could not be started in Windows 10 error

  (Not a HP website supported).

  Also, you can try to update your network drivers.  If you're still having problems, then try to review the measures offered in the following post:

  Re: Microsoft organized virtual adapter network - this device is not connected to the computer

  Let me know how it goes.  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great weekend!

• HP Pavilion 15-ak011na: you are not currently using a screen attached to a nvidia gpu

  I had the laptop for a week.

  HDMI port stopped working last night.

  I tried to run the nvidia Control Panel today and received the following message:

  "you are not using a screen attached to a nvidia gpu"

  I need a second monitor to work effectively.

  Is that what the problem of ideas?

  See you soon,.

  Sean,

  Edit: I've updated the BIOS and it is fixed.  God knows why.  I hope that's all and it will continue to work.

  The updgrade BIOS seems to solve the problem of monitor because he is still working today.

  He is allowed to make a BIOS upgarde is a new PC, but in general, manufacturers of motherboards do not recommend updated the BIOS unless it's giving questions.  Strange that the previous BIOS could cause such a problem...

  If all goes well, he continues to work!

• Pavilion 15 E014TX BIOS does not recognize the hdware, sort of drivers do not work

  I live in Sri Lanka and have a Hp Pavilion 14 E014TX Netbook, with 4 GB RAM, 750 GB HARD drive, camera, card reader, AMD Radeo 2 GB Graphix and other great benefits.  But unfortunately, none of the drivers work. AMD Radeon driver, for example, reports that the material is not present!

  MSInfo reports:

  Name of the operating system Microsoft Windows 7 Ultimate
  Version 6.1.7600 Build 7600
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  Name of system HP-15
  System manufacturer Hewlett-Packard
  HP Pavilion 15 Notebook PC model system
  System Type X 86-based PC
  Intel Core processor i5 - 3230M CPU @ 2.60 GHz, 2601 Mhz, 2 Lossnay, 4 logical processors
  BIOS Version/Date Insyde F.07, 03/07/2013
  SMBIOS Version 2.7
  Windows directory C:\Windows
  System directory C:\Windows\system32
  Boot Device \Device\HarddiskVolume1
  The local United States
  Hardware Abstraction Layer Version = "6.1.7600.16385".
  Hp-15\sadhu user name
  Sri Lanka time zone standard time
  Physical memory (RAM) installed 4.00 GB
  2.41 GB total physical memory
  1.36 GB available physical memory
  4.82 GB total virtual memory
  3.70 GB available virtual memory
  Page file space 2.41 GB
  Paging file C:\pagefile.sys

  Material is described here

  (1) can not find the drivers for my Win 7 32 bit Ultimate (legal, unpirated)- but others found with device manufacturers

  (2) I think it's maybe a BIOS problem, but I find no way on the site of HP to upgrade.

  Thanks for your help

  Thanks for help you, but it took the following for repair: 1) win 7 64 bit 2) use to reload the drivers for 'Hp pavilion 15-e016TU + 8 64 bits win7 readers' I certainly didn't use the 64-bit operating system, but it seems that I am stuck. I have this post to help others who may have the same problem - sadhu!

• "Stop 0x000000A5 the BIOS of the system is not fully ACPI-compatible every time as the installation of a new windows 7 integral over Inspiron 15R N5110.

  Hello

  I have installed Windows 7 ultimate 64 bit on many brands of laptops, but when I installed it on Inspiron 15R N5110, (core i5 and 4GBRAM). I faced an error at startup of windows 7 after completing the installation.
  NOTE: When the installation finished and restarted my computer, this window shown to me.
  
  
  
  Two options from the two options above I chose, I found myself with the blue screen:
  
  
  Error blue screen said something these ' BIOS in this system is not fully ACPI-compatible. Contact your system provider for an updated BIOS I don't know what that means and I don't know where is the culprit. I wish I could capture this error screen. However, it is impossible to do because I wasn't the Windows environment. 

  
  

  Even if the error related to BIOS necessary for the update, so how could I update as long as windows has not begun.
  
  
  
  
  
  
  
  
  Is there something that needs to be configured in the BIOS before installing Windows 7 on Dell laptops.
  I'm quite surprised that the previous system was windows 7, but it was Home Premium.
  
  
  The strangest thing is when I tried to start to repair the disk and even disk instillation of Windows to resolve startup problems, I found that this startup repair couldn't fix problems.
  
  
  When I tried to do these steps:
  
  
  1. Insert your Windows XP CD into the CD-ROM or DVD-ROM drive, and then restart your computer from the CD.
     Note Some computers may require you change basic input/output system (BIOS) settings before you can start the computer from a CD-ROM. For more information about changing the BIOS, see your computer documentation.
  2. When the "Welcome" screen appears, press R to start the Recovery Console.
  3. If your computer is configured to dual-boot or multiple boot, select the appropriate installation of Windows XP.
  4. When you are prompted to do so, type the administrator password and press ENTER.
     Note By default, the administrator password is blank in Windows XP Home Edition.
  5. By default, Hiberfil.sys is usually located in the directory root (C:\). At the command prompt, type del hiberfil.sys and then press ENTER.
  6. Restart the computer.
  When I arrived at "system recovery options, I saw that my system is listed, then I chose then, but I found myself with this ' this"system recovery options"version is not compatible with the version of windows that you are trying to fix." Try to use a different compatible with this version of windows recovery disk, even if I'm sure only that the same disk to install windows I have installed since.
  
  
  NOTE: I do not add RAM or other devices. There is a windows 7 Home premium and I just re installed a windows 7 ultimate 64-bit. I don't really know what the previous windows version 7 is 32 or 64 bit.
  I checked the dell forum and I found ' your computer goto your BIOS F2

  That goto advance Select ATA to instead of AHCPI save the setting, and then try to restart your Windows 7

  hope it will work. »

  But he did not AHCPI, but I found AHCI and let ATA instead of AHCI, but no difference that happened.

  Hello

  Check the steps suggested by LoneWolf1983 from the link below and see if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/stop-BIOS-not-fully-ACPI-compliant/25210db0-5491-4fc8-99c2-ec0361dd8388

  Warning: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly. BIOS update should be made only if necessary (to solve a compatibility problem, for example). It can be a complicated process, and if an error occurs, your computer could be rendered inoperative. Be sure to observe the instructions of the manufacturer.

  Reference link provided below for more information:

  BIOS: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

  Thank you very much

  I checked this thread, and I found this solves the problem

  I have changed the serial port in the BIOS for 2F8/IRQ3 and I have not had a blue screen since... fingers crossed, it's her!

  But as you know that no matter what BIOS are different from others.

  Thus, I have not found any serial port in the BIOS to be replaced by 2F8/IRQ3

  NOTE: My problem is when you install a new version of Windows.

  In addition, every time a new windows installation 7 and facing the Blue error screen, I started to Macrium Rescue CD and clicked "fix windows startup", and then when restart my windows, I was not facing the the Blue error screen. If windows starts successfully.

  If the blue screen error was tied to the BIOS, the Refelct Macrium rescue CD wouldn't no matter what (not know this problem)

• Pavilion 14-e042tx: maximum RAM

  Hi experts,

  I have PC Pavilion 14-e042tx-book of notes, I want to improve his memory RAM. Althogh I read the support and training page, I can't find his RAM maximum expandable. Please tell me, how much is at its maximum expandable RAM.

  Thank you.

  Hello

  From the #2 of the manual page:

  Two customer accessible/upgradable memory module slots
  Support for DDR3 - 1333 MHz single channel (downgrade DDR3-1333 DDR3-1600)
  8192 MB RAM system supports in the following configurations:
  ● 8192 MB (4096 MB × 2; not supported on models of computer with a 32-
  bits of the operating system)
  ● 8192 MB (8192 MB × 1; not supported on models of computer with a 32-
  bits of the operating system)
  ● 6144 MB (2048-MBx1 + 4096 MB × 1; not supported on computer models
  equipped with 32-bit operating system)
  ● 4096 MB (2048 MB × 2; computer not supported on models with
  Windows 7, 32-bit operating system)
  ● 4096 MB (4096 MB × 1; computer not supported on models with
  Windows 7, 32-bit operating system)
  ● 2048 MB (2048 MB x 1; computer not supported on models with
  Windows 7, 32-bit operating system)

  Several manuals:

  http://support.HP.com/us-en/product/HP-Pavilion-14-notebook-PC-series/5355001/model/5446849/manuals

  The first manual will tell you everything.

  Kind regards.

• Pavilion dv7-4180: LAN - does not connect

  Hi all

  I myself have set up in a new home and now am using a modem to the computer's LAN connection.

  I could not receive a signal when the connection of the modem to my computer, but on wi - fi systems, it works.

  Then on another computer, the LAN connection starts a blinking on the modem and there I go, connection

  through the LAN.

  The first computer that does not have a connection on the LAN-

  Q: what could cause that?

  Once again, it is very well when instead of a Wi - Fi connection and scoring in just this old LAN connection to my new residence

  does not cause it to connect to the top.

  Any advice on a particular problem is appreciated.

  AtAF

  Hi @AtAF,

  Thank you for your query.

  I understand that after moving into your new home, you cannot connect to your local network, is another computer.

  You are able to connect to hotspots Wi - Fi with your CV.

  When I did a search for your model of laptop, I got several results that you forgot to enter the two letters after the model number (example Pavilion dv7-4180us).

  How can I find my model number or product number?

  On this particular model that Windows 8 is not supported by HP so they do not list the drivers updated for it.

  Download or update of software and drivers for HP computers

  You did all your Windows updates?

  You use the same Ethernet cable that worked with the other computer?

  Have you ran the Windows troubleshooting tool?

  If you check device manager there is an error on the network card?

  Here is a link to HP - troubleshooting Wired Home networks (Windows 8) computers that should help you too.

  To say thank you for answering, please click the button below thumbs up .

  If this fixed the problem for you, please choose the solution to help others locate it.

  Good luck!

• HP Pavilion dv7t-7000 CTO RAM DDR3 or DDR3L

  HP Pavilion dv7t-7000 CTO RAM DDR3 or DDR3L?

  The manual is not precisely which of the two.
  Any idea?

  David_kata wrote:

  HP Pavilion dv7t-7000 CTO RAM DDR3 or DDR3L?

  The manual is not precisely which of the two.
  Any idea?

  Hello

  Both modules can be used. DDR3L means that memory using low voltage. Means that the modules produce less heat and last longer than DDR3 pure ones. I always use 1600 MHz CL9 DDR3 Corsair pure modules.

• Tips why do not fully expand on the Airbnb site?

  I have a list on the Airbnb site. There are several categories that I have to fill out to describe my property. On the right side there is "helpful advice" (my quotes) that expand when I hold my cursor on one of the categories I'm filling. Indicators do not fully develop using Firefox 39.0. Only partially, so that I can not read the entire message. Airbnb told me to try Google Chrome. I did, and the tips extended all the way. I like Firefox. I deleted the cache, and I reinstalled Firefox. Can you please help?

  Who did. Scrolls a little. Thank you.

• Not fully functional mouse with MacBook Pro 2010. I can scroll up and down, but can not move the cursor.  The mouse works with my new Macbook 12. No mouse problem but Macbook Pro?

  Not fully functional mouse with MacBook Pro 2010. I can scroll up and down, but can not move the cursor.  The mouse works with my new Macbook 12. No mouse problem but Macbook Pro?

  What specific mouse?