examples of write a batch of pourcopier program file

Similar Questions

• Error: "there was a disk error when you write to the file C\:Program files (x 86) \microsoft games\dungeon siege\resources\objects.dsres" during the installation of Dungeon Siege.

  When I try to install it it comes up with an error about 16% in the installation, saying that there is a disk error when you write to the file C\:Program files (x 86) \microsoft games\dungeon siege\resources\objects.dsres

  Any ideas?

  Hi MouseToe,

  What version of Dungeon Siege you trying to install?

  The cause of this problem could be the corrupted resource (.dsres) file or disk error. Here are some things you can do to solve the problem.

  Method 1: Run the disk check.

   

  Check the integrity of your hard disk for lost clusters and errors.

  To do this, follow the steps in this article: check a drive for errors

  Method 2: Defragment the hard disk.

  This improves the performance of your hard drive.

  Reference: improve performance by defragmenting your hard drive

  Method 3: Run the game as administrator.

  Here's how:

  (a) right click on the game configuration file.

  (b) choose 'Run as administrator'.

  Method 4: Try to install the game in a different folder or to a different drive

   

  Try to install the game in a different folder. If the computer has another hard disk, try to install the game on the other hard drive.

  Follow these steps.

  a. Insert the game disc in the drive.

  Note: Do not click on Quick Installation during installation.

  b. follow the setting menus until you see the change button.

  c. click change.

  d. in the path box, delete the existing path, and then type the following text:

  drive: \Program Files\Microsoftgame name Games\

  In this example,drive is the letter of the hard disk drive and the name of the game is the name of the game you are trying to install.

  e. click OK when finished.

  f. follow the instructions that appear on the screen to install the game.

  This should be it.

  For more information, please visit:

  http://support.Microsoft.com/dungeonsiegeiifaq

  For additional assistance, please post your concerns at the forum below.

  http://www.Microsoft.com/games/en-us/community/pages/forums.aspx

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to generate a working executable from the example of writer DataSocket VI file

  I am trying to build an executable file of the example "DS Writer.vi".  The first problem was that the "Control.vi of DataSocket Server" was not distributed with my script compile/install.  I fixed it (thanks Dennis) but now I get the following error message.

  LabVIEW: (Hex 0 x 626) cannot open a VI with compiled code separate in a Run Time Engine that does not have access to the VIObjCache.

  There is a solution to this (http://forums.ni.com/t5/LabVIEW/Getting-LabVIEW-load-error-code-59-using-LabVIEW-2010-with-a-Run/td-...), but it involves change a property of a VI library of DataSocket (if I understand though).  I'm reluctant to make a change to a library OR standard, because it could cause maintenance problems in the future (other developers not having the same change, or updated versions of LabVIEW).

  Has anyone successfully built an executable using DataSocket?  If so, can you offer any advice?  I'm using LabVIEW 2011.

  Thank you, Mark

  Thanks Nathan.  I was able to create and deploy an executable with DataSocket.  The last obstacle was to "uncheck the option"Code is compiled separately from the source file"in the properties of the VI" for the "DataSocket Server Control.vi.  The only problem with this solution is that I now have a custom DataSocket library.  I think that a solution would be to copy as VI or library in my project folder so that the solution is transferable to others in the future.  I would like to hear how other developers LabVIEW with custom libraries, either by strictly avoid that, keeping their own copies, or another solution.  But this is probably a topic for a new thread.

• What does "cannot write: c: / program files/dell support center/imstrayicon" means and how can I solve the problem

  What does "cannot write: c: / program files/dell support central/imstrayicon" mean and how do I remove the note from my screen or solve the problem

  Hi Thomas,

  1. when exactly you get this message?

  2. this happens to you on starup windows or when you try to use a specific program?

  3. did you of recent changes on the computer?

  This seems to be an error related to the centre of Dell Support.

  Step 1:

  If you receive at the start, then you can try to disable any support Dell Center entries in startup items and see if it helps.

  a. Click Start, type msconfig.exe in the start search, and then press ENTER.

  b. click on the Startup tab and uncheck then the program in the list.

  Hope this information is useful.

• How to remove multiple Firefox beta 4 under Program Files folders. Just delete? Profile data appear to be under Beta 12 and 8 Beta for example.

  Currently under Firefox 4.0.1.
  under Program Files, there are the following folders:

  Mozilla Firefox
  Mozilla Firefox 4.0 Beta 7
  Mozilla Firefox 4.0 Beta 8
  Mozilla Firefox 4.0 Beta 12

  The first two have only 2 records each (extensions and plugins)
  the other two have a lot of folders, files .dll etc.

  Profile data is stored elsewhere, you can remove the old records of installation of Firefox if you wish.

  For info on Windows 7, profile folders are located here - default C:\Users\ < windows user name > \AppData\Roaming\Mozilla\Firefox\Profiles

• Problems with the opening of attachments when the user has restristed privilege to run executable code from Program Files and Windows folders.

  I'm trying to prevent users from running potentially dangerous files. According to the Windows policies so I put. Users can run any application Program Files, files (x 86), windows, and folder to all users of the program office. Users have no permission to write anything in this files. When the user double clicks for example document.doc on his desk - document opens fine with MS Word. But when the user tries to open this document in attachment directly (by selecting open with MS Word, instead of the economy) - he sees an error - "this action is limited by local politics. Ask your system administrator. "(not exact text).

   So I want, users able to open attachments from Thunderbird automatically, but not able to run any application or link, except Program Files, Program Files (x86), Windows and all users' desktop folder. How can I get this result?
  

  Thanks in advance.
  Calvo is serious.

  PS Sorry for my bad English. It is not my mother tongue.

  Thanks for responding.
  I discovered what was going on.
  This strange "bug" affects multiple computers with Windows 7 Ultimate in my case.
  When you create a SRP (software restriction policies) it creates two rules by default to run programs: windows folder and the Program Files folder. I manually add "C:\Program Files (x 86)" in places without restriction. BUT Windows and Program Files folder to default rules directly, but through registry keys. And this part seems difficult. You CAN run the executable files of Program Files. You CAN run the Program Files (x 86) executables. But if Thunderbird or Firefox try to run MS Word or excel or editor for.doc or *.odt opening or another file - downloaded files running programs blocked by SRP.
  In order to fix this, simply replace the rules for indirect paths like % HKLM/software/microsoft/windows... etc % with direct, for example "C:/Windows" and "C:/Program Files /". After that, everything works fine. Attachments and downloaded files automatically opens without a problem.

• Installer Help folder inside %Program Files% permissions

  So, I just created an installer on my Win7 machine, and I'm running into problems.

  Let's call my request "MyApplication.exe".

  The application is installed in "C:\Program Files\MyApplication"... which is great.  It also creates a couple subdirectories inside this folder that my application will use.  For example:

  C:\Program Files\MyApplication\Data

  C:\Program Files\MyApplication\Log

  My EXE needs create files and write to these subdirectories.

  The problem is that after installing, my EXE has no permission to write to these files.  I think that by default, Win7 Program Files read-only for average users.

  Is there a way that my installer can allow the files 'Data' and 'Log' only during installation?

  Voila!

  Found the answer myself.  Although I would update my own post.  When you build your Installer, the solution is to check "unlock" on the file/folder want to write:

  

• antivirus quarantined files in the directory of firefox as a malware program files

  These 3 files have been quarantined as viruses or Trojans heuristics:
  libegl.dll
  nssdbm3.dll
  webapprt - stub.exe

  All 3 files are in the directory program files for firefox. Once these files have been quarantined, and tried to launch FF I got error:

  Could not initialize the safety component of the application. The most likely cause is problems with files in the files of your application directory. Please check that this directory has no restriction of read/write and your hard disk is not full or close to full. It is recommended that you leave the app and solve this problem. If you continue to use this session, you might see the incorrect application behavior when you access security features.

  Once I click OK it opens FF but it won't open the home page. I want to be sure that these are in fact FF program files and not a virus trying to wreak havoc on my laptop. Thank you.

  Unfortunately, I can not add troubleshooting information as I'm in THE writing of this since I can't open FF.

  Hello szzqz, yes judging by the names of single file, these are the files that come with firefox and which are necessary for normal operations - so it is very likely that it is a false positive of your antivirus software. just to be sure, please download the full version of firefox for your new system from the official source to https://www.mozilla.org/firefox/all/ and install it on top of your current installation, which will replace the missing files.

• Error 1 has occurred to C:\Program Files (x 86) \National Instruments\VideoMASTER\bin\VideoMASTER.dll\Check Size.vi of data

  Ok... Seriously I'm banging my head against the wall here.

  I'm using LabVIEW 2011 SP1.  VideoMASTER 3.1!  I have compiled mass screw on the 2011 folder.  It does nothing good.  2 machines to put up with the same versions of LV and VMS.

  I use the VBF in Image file VI niVMS to convert .vbf files to jpg.  I browse to folder of waveforms in the public domain for VideoMASTER and select the native C:\Users\Public\Documents\National Instruments\VideoMASTER\Waveforms\480p RGB OmniGen.vbf file.  I then monostable it in the same folder as the jpg file.  I get the following error:

  "Error 1 occurred in C:\Program Files (x 86) \National Instruments\VideoMASTER\bin\VideoMASTER.dll\Check Size.vi of data.

  Possible reasons:

  LabVIEW: An input parameter is not valid. For example if the input is a path, the path can contain a character not allowed by the operating system such as? or @.
  =========================
  NOR-488: command requires GPIB controller charge controller. »

  On computer A, I do NOT get this error (in fact, everything works fine for all files).

  On computer B, I get the error.

  Do the same for the vbf HDMI file in the folder of waveforms and it works very well.

  Do the same for the 480 p file, but a bmp file and no error, however the bmp file is corrupted with no data.

  I need to know what is happening in the bowels of this dll.  Maybe I'm missing a codec on Machine B?  It seems that I'm missing a dependency for this file type.  If so how would I know which?  VMS I reinstalled several times.  I copied the dll over the Machine A.  I checked is NOT a licensing problem.

  Any thoughts?

  Thank you

  Jigg, with some quick research, it seems that the accident that you see can be related to do not call the niVMS function initialize before VBF to picture file feature.  Please try to run each of the screws after the launch of LabVIEW 2011 and see if you get the same results, and also adding the Initialize works in your code solves the problem.  If so, it seems that it will be your workaround solution, but we will also file a bug report; crash is not an expected way to treat this condition.

  Edit: Also, if you have other versions of LabVIEW, 2012, etc., which you can compare run this code, we would be interested in the results.

  Thank you

• Write several bays in one xml file at different times without overwriting the old file?

  Hi my name is Dustin,

  I am new to labview and teststand... I try several tables of data in a single XML right. I can do this with a cluster but I need to create a variable for each of these pictures (21 pictures) and I was hoping to use the same variable for each table. Which means that I get my data table write in an xml file and replace this table in this variable with a new table and then call my VI who writes this table in an xml file and write to the same file xml under the first table without crushing. My VI I created to write a table to an xml file is attached. Yet once I wonder if there is a way to write several berries in a single at different times xml file, without overwriting the old file xml.

  Thank you

  Hi dlovell,

  See the attached example. I think he can help you.

  Kind regards
  Nitz

  (Bravo to give good answers, mark it as a Solution If your problem is resolved)

• HP laptop does not downloaded program files

  Hello world

  I don't know when this started, but whenever I download a program file, the download is complete, but the file does not open when I click on 'run '. For example, I tried to download the installation of Flash Player and my laptop downloaded the file but I kept clicking on "Run" and nothing appears on the screen.

  Two weeks later, I tried to download the update for Epson printer and again, my laptop downloaded the file but when I click on "Run", nothing.

  I checked to see if it was my firewall settings, so I turned it off and tried to run the programs, but not luck. Any suggestions?

  Thank you

  Nicki

  This problem occurs in IE or other browsers?

• How to locate a file DSN path (e.g. "C:\Program Files\Common Files\Data Sources\mydata.dsn"changes to C:\Program Files\Fichiers communs\ODBC\Data Sources\mydata.dsn"in French")

  Use us the DSN file in our application LabVIEW but have found that, when the application is distributed to Windows XP configured for foreign lanugages (e.g. French), the C:\Program Files\Common Files is localized to something else (for example C:\Program Files\Fichiers common).

  How can you change Setup to handle these problems? Or how we can programmatically determine the correct path of common files (i.e. localized) what, so we can copy the DSN files in the folder when the application first runs?

  You can also read a large number of paths by using the register screw

  The paths are in HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders or in the HKEY_CURRENT_USER folder.

• Why not remove the program files for the programs that I have removed from my computer?

  I deleted the AVG Internet Security on my computer. Under my program files, there is still a case for moy. My computer won't let me remove it. It says "cannot delete avgcgfx.dll: access is denied, check that the disk is not full or write protected and that the file is not currently in use." It is not used because I deleted it. This is not the first time that I could not delete a folder. What is the solution and why is it?

  Hello

  What operating system do you use?

  I suggest you to take ownership of the folder and try to delete the folder

  I suggest you follow the link and check.

  Troubleshoot "access denied" when opening files or folders

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  Windows 7

  Appropriating a file or a folder

  http://TechNet.Microsoft.com/en-us/library/cc753659.aspx

• I had windows updates only 3 update 11 failed and not update, now I can't open my program files

  After starting to install windows updates failed only 3 including 11 installed has not tried again they now cannot access some programs include research on the windows desktop, Explorer windows, help and support, system information, disk cleanup, defrag the files, microft office, others I right click and click Properties find target then I get a message could not open the windows file install is not properly installed ,

  Your last two responses bring back us to 2 two things you posted yesterday (I had hoped we could avoid).

  In reverse...

  [#1] ... I received an error message when I booted my computer that says "cannot find componate RPS.exe. "AntiFr.dll was not trying to install again.

  Several years ago, before Verizon (or whatever your telephone company was called at the time) gave the suite McAfee customers, she gave another sequel on Proctection of Radialpoint Suite (AKA freedom Internet Security).

  The code snippet above tells me that the Radialpoint suite has been installed on your computer at somepoint in a past distant: files RPS. EXE and ANTIFR. DLL are 'leftovers' from Radialpoint Protection Suite (where letters RPS in the first file name).

  Speaking of the hard personal experience, I can tell you more about Radialpoint is about impossible to remove completely without manual editing of the registry - something you DO NOT want to do!

  And despite what the volunteer moderator McAfee Forums and communities (own KB of Radialpoint article) has to say, you do NOT want to download Microsoft's Windows Installer Cleanup utility now interrupted the quoted source not Microsoft !

  [#2] ... I installed Speedy [PC] Pro last week... every day since then, around 15:00 I get a message that says "cannot find c: Program file commune File\SpeedyPC Software\UUS3\UUS3.dll ' I click on close and she goes until the next day.

  Unfortunately, installation & with the Speedy PC Pro 'scareware' is no worse, Dennis. [It is called "scareware" because you have to buy this disreputable application ($34.95 USD, I heard last) until it 'fixed' anything.] [Of course, it won't fix a 'thing'!]  See this recent discussion, some-online http://answers.microsoft.com/en-us/windows/forum/windows_vista-security/who-are-speedy-pc-pro-and-are-they-safe-to-use/62629332-a670-4166-b418-e2a5a876daa1

  TIP: If you ever think that your registry database must be cleaned, repaired, boosted, point, healed, twisted, fixed, magnified, "swept" or optimized (it isn't), read http://aumha.NET/viewtopic.php?t=28099 and draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

  If you had not used the Speedy PC Pro crapware, there is a very slim chance that you would be able to install the suite McAfee/Verizon again - at least according to McAfee Tier III Support Tech post on this page. But you don't have so there is nothing we can do about it now. [No, System Restore may not "come to the rescue" here.]

  => Let me level with you here: this set of the problem is due to have not entirely - remove the McAfee free version to test which is preinstalled on your computer, years BEFORE the installation of any antivirus application (for example, the suite of Radialpoint) AND BEFORE installation of Windows updates.

  Now the very bad new: the only way to return your computer to a functional & secure State is backup so your personal data (for example, the contents of the My Documents folder;) Favorites of IE; E-mail Client data) then format the hard drive and do a clean install of Windows XP (or buy a computer brand new Windows 7).

  Follow the instructions (to-the-letter & in order!) in this post of mine in another forum: http://aumha.net/viewtopic.php?f=62&t=44636

  If you need additional help with the new installation, start your own, new topic in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

  If these procedures are outside your technique "comfort zone" - and there is no shame in admitting this isn't your cup of tea - take the computer to a local, reputable and a stand-alone computer (that is, not "BigBoxStoreUSA" or Geek Squad), repair shop & let them do the work.

  Note: The computer must NOT be connected to the internet or local networks (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

  I sincerely wish I had better news for you.  Good luck!

  =================================================================
  WARNING: Displayed AS IS without any warranty. MS MVPS represent or work for Microsoft

• When the shared program files to remote machines using the command line it shows in the 'c' drive volume has no label

  Considered system 2A & b... I need write access to the Program Files directory of computer remote (B) (a)... trying to create a file or folder.
  using command line.

  Hi kesavarajm,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet forum.

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads