Excel automation

Similar Questions

• TDM excel automation

  Hey there,

  I have a script that creates *. TOC files. The annoying part is that I have to right click on the file to be converted with the TDM EXCEL ADD INN and save it under the same name as the created every time *. TOC file.

  So, I tried to apply in my script but it doesn´t work.

  There a piece of code, I found here in the community, but in the line that says 'oComAddIn.connect = True' produces an error.

  Dim oExcel

  Dim oComAddIn

  Set oExcel = New

  For each oComAddIn in oExcel.COMAddIns

  If oComAddIn.ProgId = ExcelTDM.TDMAddin "Then" ""

  oComAddIn.connect = True

  Otherwise oComAddIn.Object IsNothingThen' use the interface of the object here

  On the other

  MsgBox "no object available interface! :-(. (("

  EndIf

  EndIf

  Next

  I m very grateful for all the help.

  After running the script, please take a look in the Windows Task Manager. Excel still works?

  If so, the following lines should close Excel at the end of the script:

  oExcel.Application.Quit
  
  Set oComAddIn = Nothing
  
  Set oExcel = Nothing

• Start TDM importer Excel automation index

  I'm trying to create a macro in excel to import and format data from a .tdm file.

  The files to import sometimes exceed the limit of 1 M in Excel line, when that happens, so I want to generate two workbooks. One of these binders to be generated from a starting index of 1 and the other must be generated from a beginning index of 1048576. Right now I use the silent mode to give a hint of departure of 1 and then again run the importer and enter 1048576 manually to the second workbook.

  My question is: is it possible to set the index of departure via a macro?

  I looked at using the sendkey command to generate the key sequence "tab tab 1048576 enter" required, but excel cannot interrupt the object call command to do this.

  Thank you very much

  Alex

  Alex

  I did a fairly complex treatment with DIAdem.  Your request is not a big deal to do in tiara.

  For maximum flexibility, you can take the references to the chain. As shown below in oChan01.  This will allow you to manage a channel such as a table. The limits of this approach is the speed, built-in functions are faster that approach and should be used as much as possible.   The chnfind command is an examle that is much faster to find a specific value in a channel.

  OptionExplicit'Forces the declaration explicitly all variables in a script.

  Dim oChan01, i, GPB, dVal

  define the GPB = data. Root.ChannelGroups ("EXAMPLE")

  Set oChan01 = oGrp.Channels ("Time")

  for i = 1 oChan01.Size

  dVal = oChan01 (2)

  next

  Paul

• Comparison of Excel automation BI

  Hi all

  I am trying to record a BI functional script using openscript, in my case, I need to compare two excel sheet, IE. Excel QA with Prod. is it possible to solve this problem...?

  Thanks in advance

  Vaisakh.A

  Hi samir,.

  Use datatable in OpenScript concept.

  What I understand, it's--you're trying to automate a scenario where an excel will be downloaded in your navigation of scenario. Same thing will happen for QA and PROD. You want to add code to compare downloaded excel.

  Correct me if I'm wrong.

  Import excel to datatable and give the code for comparison.

  Kind regards

  Dembélé M

• How to get Automator to export a list of file names in an Excel workbook?

  I have a spreadsheet with all the file names of my Sibelius (.sib) scores without import/y attach files to a 2011 Excel workbook. I tried different ways to help automate it, but it seems to only be able to export .txt files in Excel. On some combinations, I tried, even lets link you to files that I'm not interested by - all I want is a list (editable preference) of my file names so that you can see them all in one area and check what I have / I do not have.

  I use Yosemite 10.10.5 (I don't want to upgrade to El Capitan due to driver compatibility issues) and Microsoft Office for Mac 2011.

  Any help would be appreciated

  I can't help you with Automator, but there is a solution.

  1. launch Firefox.

  2. drag the folder with the files in the Firefox window. (The example is a folder of image files)

  

  3 - Select all the entries on the page in Firefox:

  
  4 - Open Excel and paste it into a spreadsheet:

  

  5 - remove the size and last modified columns. To remove the links reformat the text column.

  

• Creation of Refnum Automation to Excel

  Hello

  So I've worked to read Excel documents with report generation tool, but realized the document I was trying to read is password protected and requires an update link (PivotTable).

  Searching I found an accessory useful toolkit Joe_H (post #2) http://forums.ni.com/t5/BreakPoint/Excel-Board/m-p/379682 . I try to recreate its VI, but there are some things I don't understand. (I started only working with refnums & variants)

  My Questions:

  1. referring to my 'refnum.png' attachment, black refum automation is copied from example VI and purple is what I tried to do. They have the same ActiveX class, but purple throws an exception error 3005. I can't find the refnum of the black arrow.

  Googling this error, gives a solution, but I can not understand how to use or if it applies to me. http://forums.NI.com/T5/LabVIEW/error-3005-occurred-at-Automation-open-using-ActiveX-RichText-box/TD-...

  2 referring to 'excel.png' for the node invoke - workbooks, how is a person knows how to use the data types variant? For example, WriteResPassword I just tried to use a string and it worked. I noticed that the help info gets thinner when working with property/Invoke nodes.

  Thanks for your time.

  I don't know why the difference in colors between the refnums, but I doubt that's the problem. Looks like it's just an artifact weird opening a VI from an earlier version of LabVIEW. If you convert this refnum control to a constant and then again to a control, it will turn pink, but I guess it will always work. Can you show the code showing you how you use this refnum?

  As mentioned nyc, you refer to the Microsoft documentation to determine what kind of data for wire entry variant. There is no documentation of LabVIEW because it is not a component of LabVIEW.

• Automation of several scanned page PDF export to Excel

  We have MANY PDF files scanned at work (about 8 400) that we need to export to Excel. There are a few tricky parts to what I'm trying to find out if there is a way to automate this. These are all individual PDF files, but I know that I could convert them all to a multipage PDF, if I need to, that shouldn't be a problem. The major problem being that we want only a small part of all files PDF, the upper left corner that has some basic information (name and address) to be exported to an Excel worksheet. The rest of the PDF file is not required. If that helps anything on the automation of formatting are simple page PDF. Anyone know if this is possible?

  I asked this in the PDF forum, but someone suggested to ask in the forum of java script instead.

  It can be done, most likely, but it would be a custom script to extract the text from the desired coordinates and then export it to a format that can be read using Excel (for example, a text file delimited by tabs). This is not a simple task, however.

• Need of Encarta acroexch.dll I need it to do some automation to Excel to PDF. Which product is this file or where I can get it?

  I need it to do some automation to Excel to PDF. Which product is this file or where I can get it?

  The correct function is "CreateObject" - you misspelled it.

• Excel Add-In: COM Automation only as an administrator?

  Hello

  as I tried to connect to the TOC (see code below), I got the message that he need permission from the admin

  Set obj = Application.COMAddIns.Item ("ExcelTDM.TDMAddin")

  obj. Connect = True

  Is it really necessary to have the authorization of the Admin?

  Thank you

  El arfaoui

  Hello Manu,

  as you can see here, you need start Excel in administrator mode once after the installation of the TDM Excel Add-In:

  http://www.NI.com/white-paper/4906/en/

  Hope this will help you.

  Best wishes

  Dennis

• Generation of quiz multiple choice of automated text or excel file.

  Is there a way to automatically generate questions multiple-choice an excel file or a text file, instead of manually create and enter data for each question?

  A custom widget would be able to manipulate several slides to do this, or are they limited to a single slide?

  Click on the link below. Captivate 7 has an ability to import.

  Click here to see

• Automation of exit Excel and 'recording' default directory

  Hello
  
  I searched the forum for an answer, but could not find a complete solution.
  
  User at the bottom of a report, he can click a button and it would be:
  Save in Excel format in a default directory automatically.
  
  For example, it would be saved under C:\Saved Reports\data_for_word_fusion.xls
  
  How can I do?
  
  Thank you.

  Two things: one that is NOT a TRUE Excel file, it is something closer than the CSV file, but if you open in a text editor, it's an HTML file in the format element. Two: Each browser will allow you a latitude for downloads and more, but there is NO real way to FORCE a user to upload a file to a predefined directory, it would cause too many questions...

  Thank you

  Tony Miller
  Webster, TX

• Forms webutil excel ole automation

  has anyone tried to put what follows in the forms using webutil client_ole2

  	ActiveWorkbook.Names.Add Name: = "DataTab", RefersToR1C1: = "= Sheet1!" R3C2:R9C4 ".
  	ActiveWorkbook.Names ("DataTab"). Comment = «»

  	With ActiveWorkbook.Names ("DataTab")
  	. Name = "DataTab"
  	. RefersToR1C1 = "= Sheet1!" R3C2:R15C4 ".
  	. Comment = «»
  	Ends with

  Thank you very much, Michael Ferrante

  I could solve the problem by using following code

  v_txt: = ' = DataSheet! $A$ 3: $$M 40';

  		args: = client_ole2.create_arglist;
  		client_ole2. Add_arg (args, v_txt);
  		tableNames: = client_ole2. GET_OBJ_PROPERTY (spreadsheet calculation, 'Beach', args);
  		client_ole2. Destroy_arglist (args);
  		client_ole2. SET_PROPERTY (tableNames, 'Name', 'ProduitLogiciels');

  Thank you

• It is possible to automate Firefox uses Excel VBA

  We did Automating Internet explorer by using VBA, now we have some projects that supports and do the work on Mozilla only... If need to automate applications in firefox using VBA excel macros.

  I heard it is possible adding and some dll regestring. So could you please help me on this with precision.

  Thank you and best regards,
  Nani.

  This forum is for the support to the users , your question is beyond the scope of assistance to users.

  Try searching for the Mozilla Developer Network site on your query.
  https://developer.Mozilla.org/en-us/
  
  Here is an article on the generation of a component DLL.
  
  https://developer.Mozilla.org/en-us/docs/Building_a_component_DLL

• Excel columns appearing not

  Hi all -

  Recently, some Excel spreadsheets that I download mush information of several columns into one cell.

  Here is a screenshot-

  

  No idea why this is happening?  It was not used to and I can't seem to fix it.

  I'm in the last whole on a 2 month old iMac.

  Steven

  Are copy you - paste the information contained in, or in numbers you go File > open in your menu?

  If you are the copy - paste, make sure that you click on a cell numbers once before you command + v to paste.

  If you do file > Open a .csv file (make sure it has the .csv extension) then it is possible that the file is in a format that gives hard numbers. If the choice of the download format choose comma separated and not delimited by tabs.

  In this case, you can try this text to columns Automator Service (download Dropbox).

  Double-click it to install it, give permission if necessary in system preferences > security & privacy.

  To use just select cells with information all come on him in a column and with the selected cells in numbers > Service menu and choose the text columns. Meet the guests. Then, click a cell in the numbers once and type command-v to paste.  If you have chosen the right separator (you may need to try different) values should paste into several columns.

  SG

• Virtual Excel file import NI Switch Executive device problem

  When I try to import OR switch Executive configuration to a file .xlxs error

  "An error occurred trying to read the file. Invalid device name «THIRD _PARTY_MATRIX» IVI "An error occurred while trying to access primary device _PARTY_MATRIX error THIRD: (Hex 0xBFFA4001) unknown status code.

  is displayed. I have no problem importing OR switch configuration Executive in .xml format! Can someone tell me why? Please, I beg you!

  I use a switch

  Executive 3.0

  Measurement and Automation Explorer worm 4.5.0f0

  LabVIEW 8.6.1

  Thank you very much

  Hi Mehran,

  Thanks for providing the attached files.  I have determined that the cause of the problem may be due to a setting of simulation of IVI.

  Currently, your IVI Driver Max sessions are configured so that simulate attribute is set to False.  This means that real hardware must be connected when opening a session IVI instrument.  If you do not have the hardware attached, then the call to initialize IVI fails (and potentially bad, depending on how the IVI specific driver manages an init call without hardware).

  Import the NI Switch Executive configuration in .xml format does not cause a problem because simulate is always set to true in the call to initialize of IVI.

  We will consider changing the import Excel in the future to also have always simulate the True value.  Time, you can a) check the hardware is connected when you import Excel, or b) set the value "Simulate with" Max to 'Specific Driver' applicable IVI pilot sessions.

  Example of setting "with"to simulate 'Specfic Driver' of MAX:

  

  Let me know if you have any other questions!

  Chad Erickson

  Switch Product Support Engineer

  NOR - USA