Exception - PSE8 + Windows 7 - printing

Similar Questions

• HP 5530: Windows 10 / printer HP 5530 visible, ping-measure but "installing network without success" - workaround

  Windows 10 / printer HP 5530 visible, ping-measure but "installing network without success" - workaround

  (FYI)

  Problem: Windows 10 laptop (previously Windows 7) would not install HP 5530 wireless printer using the HP installation software.

  (Other portable, always running Windows 7, install the same software of the printer without a problem.) All computers had until then used a HP 5510 without problem).

  The printer can be "seen" by phone, via a router, in the dialogues of installation software, but 'installation network without success' has been reported: in other words, after identification and selection of the printer on the network, install "spun" for several minutes until the outage has been reported. (Installation by USB connection was successful, but still later without success in wireless network installation).

  Printer able ping go laptop all the time, and test page was printed wireless through the web page HTTP printer (e.g. 192.168.1.x) parameters.

  Firewall has been abandoned and latest drivers from the web site HP downloaded - however, Setup still not at the same point each time.

  Solution: In Windows 10, start menu: -.

  Printer Settings\Devices\Add or Scanner\Printer I want to is not listed\Add by the TCP/IP address [use the IP address identified from the display or printing settings printer] - check the box for pilot chosen automatically by Windows.

  (In other words, add the printer as a printer without using HP installation software at all.)

  Result: the printer is available (after restart) wireless on the laptop - seemingly normal and as a shared printer - wireless printing was possible.

  (Solved) (Apparently)

  According to the http://dfarq.homeip.net/2015/01/how-to-add-a-tcpip-printer-in-the-windows-10-technical-preview/

  Good luck to anyone with a similar problem!

  I'm still working 24 hours.

  (Solved) (Apparently)

• HP Laserjet installation on Windows 2012 print server

  Hello Forums HP

  I try to add a Hp Laserjet P4515 on a Server Windows 2012 print and update its parameters to itself all 6 trays installed.

  I realized that on a Windows Server 2003 print using HP PCL 5 universal print drivers by using the Automatic Configuration under device settings option in the printer properties. However, following the same procedure on the server of 2012 option Update configuration is missing.

  I left the configuration of the printer automatically select the driver which is listed as HP LaserJet P4515 PCL6 on the name of the driver class and Micorsoft Point and print on the Advanced tab.

  Does anyone know how to get the driver to update the config?

  Regards,

  Cam

  I finally got this working. Remove the printer and starting from scratch.

  I have downlaoded 32-bit and 64-bit drivers PCL6 and extracts into a folder. Started the installation of the new printer manually and unchecked the box detect automatically the driver. Come in 64 bit location extracted folder and allow the driver to install manually. When installation is completed I went the printer properties/sharing tab and select additional drivers and checked the x 86 button. Then, said the browser in the 32-bit extracted folder.

• Windows 7 printing with the HP DesignJet 4000ps printer. PLT files

  I have a bit of an interesting problem. Our HP Designjet 4000ps is connected to the network and available via a windows print server or directly via the IP address.  To print our files .plt CAD, for years, I simply added an action to the. PLT file type association to run a batch file by default so that when I double-clicked on a .plt file, it could be copied by the script for batch processing on behalf of the plotter print queue. It worked great until upgraded to Windows 7.  Now when I copy a .plt file to the print queue, the name of the document in the queue of work just appears as a work #xy and has a date unknown and no username listed. The same thing happens if I used the FTP for the tracer to place the file, however to track down an old XP machine and verification of my batch script as well as the method of FTP, the name of the document, date and user name all appear incorrectly in the work queue.

  If anyone else has experienced this? Is this something the way that Windows 7 print spooler works? Is there a way to fix this? If I use the interface for Server Web Designjet 4000ps to send files, everything is correctly listed. This happens only when I'm attemping to copy the file directly to the queue or using FTP on Windows 7.

  David

  Hi KroBaar,

  The Designjet is a commercial product.  I you a link towards the Designjet forums try to repost your question here for better coverage.

  Designjet Forums

• Windows photo printing Wizard error message "not enough memory available"?

  Windows photo printing wizard when trying to print a jpeg photo get error message "not enough memory is available for rocess this command" I talked to my tech guy and he said another customer is having the same problem.  Is this a problem with a recent update?  How to fix?  This worked well before

  You can try try by forming http://support.microsoft.com/kb/315265 of disk error checking
  You can also try the steps in this link http://support.microsoft.com/default.aspx?scid=kb;en-us;241258

• Failed to create system restore point exception exception c:\windows\system32\shell32.dll,control_rundll,"c:\windows\system32\sysbm.cpl",system

  Original title: I can't do a restore point.

  I get exception c:\windows\system32\shell32.dll,control_rundll,"c:\windows\system32\sysbm.cpl",system what can I do?

  This has happened for a very long time.

  Does really say '... sysdm.cpl "?"

  Is that what the text complete and accurate of what the message said exactly?  (there is no sysbm.cpl in XP, but there's a sysdm.cpl).

  What happens if you click on start, run and enter in the box:

  sysdm.cpl

  Click OK - the system properties box opens?

  What happens if you click on start, run and in the type box (exactly):

  %SystemRoot%\System32\restore\rstrui.exe

  Click OK - is the open window of the system restore?

  What is exactly the process (step by step) you are using when you try to create the restore point and when in the process you see this message?

  I think it's a miracle that the Microsoft support engineer can provide a link to an article when the error message report you is a little out of whack and articles doesn't mention your error message at all.  It's real good troubleshooting or clairvoyance!

  You should also tell us a little about your system:

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Do you see that you think not you should see and when you see it?

  What do not you think that you should see?

  If the system works, what do you think might have changed since the last time it did not work properly?

• Dell A920 for Windows 8 printer driver

  HI -.

  I followed the instructions to the title of the other positions and installed the A920 on my Windows 8 print driver, however, when printing it seems to be a problem to identify the ink levels.  The display window shows no ink and therefore does not allow the queue to proceed.  Is there a cure for this problem?

  Thank you

  TheIndianBradPitt,

  Try the following...

  First run, delete print jobs to eliminate any print job stuck in the queue.

  Unplug the printer.

  Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

  Restart your computer. Make sure that the printer is deleted. Driver Manual printer removal

  Download the 32-bit drivers for Windows 8 32 bit Vista or 64-bit drivers for 64 bit Vista Windows 8. Install the Vista drivers in Vista compatibility mode, you will get a message, the printer is not connected. Connect the printer at the moment (power on).

  You will find links to the patch/drivers to...

  Owners of printer inkjet all-in-one Dell A920 thread (W7)

  Firewalls and anti-virus programs will block communications. If you have not installed one, Windows Defender is the default value. Try to read...

  Enable the printer after Microsoft Essentials/Windows Defender

  Rick

• I have nothing on my screen except the window side bar same not start how he back?

  I have nothing on my screen except the window side bar same not start how he back?

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 print spooler crashes

  Running Windows 7 Pro with all the latest updates...  Installed a HP 1600 with the latest HP drivers and local printing works very well.

  Set the printer to be shared on the network.

  Installed the latest drivers from HP on the other 3 machines with the latest operating system upgrades...  (1) Windows 7 Pro, (2) Windows 7 Starter, 3-Vista 32.

  Print jobs sent from any of the 3 other computers to the shared device deepen the impression that but crash.

  Jobs will not print until I have stop and restart the spooler service for printing on Windows 7 Pro machine to which the printer is physically attached.

  However, I have connected the printer directly to my router and all computers can print without problem.

  For me it nails down to be a problem with the Windows 7 print spooler or a parameter that it controls.

  So, is this the print spooler, or is it a setting at the origin of the problem?

  And, if it is a parameter, one that or those?

  On the Ports tab in the printer properties on the computer that is sharing the printer, uncheck enable bidirectional.  The HP language monitor needs access to a resource that has only the local administrator.  When you restart the spooler of jobs are planned in the context of the system rather than the context to users.

  Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• Compatibility with Windows 10 printer

  It's the all-in-one Officejet 6600 compatibile with Windows 10?

  Has been answered many times already. http://h30434.www3.HP.com/T5/printer-all-in-one-software-drivers/Windows-10-printer-compatability/TD-p/5162839

• Cannot open the .eml files in Explorer windows except for Windows Live Mail

  In Windows XP, I could download the files of .eml Windows Live Mail on my computer and then open them from almost anywhere on my computer. In Windows 7, I can only open these files in Windows Live Mail. I have created an association between the 2, but I can not open files with the exception of Windows Live Mail. How can I change this?

  Simple design flaw. Simple solution - but he just buried by so many doors to Microsoft you idiots jump through.

  Follow these steps:

  I found the solution: Set Window Live Mail (WLM) defaults for EML files in Winodws 7:

  Panel--> programs-> set your default programs--> Windows Live Mail--> choose Defailts for this program. Now simply select .eml by checking the box. Select Save at the bottom and close.

  There you have it.

  It's another forum by Mike - http://TechHelp.Santovec.us

• Cannot start Windows 7 Print Spooler stops (0x000006ba error) when installing or uninstalling printer.

  This PC had a fairly recent reinstallation of Windows 7, then he started screening blue, run system restore a few weeks and works very well, but it will not be printed.  When you try to install a printer, it gives a 0x000006ba error code and says that failed to start the spooler.

  The spooler may start, but stops when you try to install the printer.

  So far, I have:

  ran sfc/scannow

  Re-registration of dll

  replaced spoolsv from the windows disk

  has run a few utility programs such as tweaking.com, UVK and combofix

  Chkdsk /r

  restored back as it would go

  remove the old printer

  drivers wanted and removed old print

  deleted registry entries

  shown ancient and hidden devices in the Device Manager and remove the

  and basically, did every challenge on the internet.

  Before I'm stuck reloading this machine again, I'd like to get some really advanced or random fixes that worked for you, when others have not.

  Thank you.

  Hello Kevin,

   

  Thanks for posting your question on the Microsoft Forum.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  What is the brand and model of your printer and your computer?

   

  Try it out below mentioned methods and see if it works for you.

   

  Method 1

  This tutorial is designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

   

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2

  You can also try running the fixit provided in the following Microsoft article.

   

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

  Method 3

  If the question is always persistent then it means either the print spooler service is missing or damaged, I suggest you run the REG file that was downloaded in the link provided by Ramesh Srinivasan in his position, responded on June 2, 2012 in the thread link provided below.

  Deleted print spooler service

  http://social.technet.Microsoft.com/forums/Windows/en-us/9d0bd665-621d-449E-a22f-b512e068ba2a/print-spooler-service-removed

   

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• Canon MP700 and Windows 7 printer error

  I just installed a desktop computer Dell XPS 8500 with Windows 7. I have connected my Canon MP700 who worked with my old computer. When I try to print I just get a dialog box with "collecting printer status" and nothing prints. My document shows a printing error in the print queue. I downloaded and installed the 64 bit Windows 7 printer driver for my MP700.

  Hi Garry,

  This problem can occur because the printer settings.

  Try the following and see if it helps.

  
  Method 1:

   

  Restart the print spooler device:

  a. click Start, select Control Paneland then click on Administrative Tools.

  b. double-click on Services.

  c. in the user account control window, click on continue.

  d. click on print spooler.

  e. click stop to stop the print spooler.

  f. click Start to restart the print spooler.

  g. click on OK.

  h. restart the computer and check if it helps.

  
  Method 2:

  Refer to the steps in the following Microsoft article.

  Why can I not print?

  Solve printer problems

  Keep us informed on the status of the issue.

• Windows 8 prints to the left of the page using F-380-OCR-RTF

  Windows 8 prints to the left of the page using F-380-OCR/RTF

  Hi Spencer.

  ,

  Thanks for your reply. I was trying to avoid buying Microsoft Office 2010. After downloading Office I couldn't yet open MSWorks. My next step was to talk to someone at Microsoft.  This young lady was extremely helpful and patient with me. Software has been installed called 'conversion of works '. I just click on works document choose Word and that's it. After talking with her, I am now 'smarter than a fifth. Now, I love my better Windows 8, but not as much as Vista yet.

  Plenty of hot water the time however, it looks like a front going O. Maumee probably around 23:00. I have chairs patio attached to the bottom.

  Sorry for the letter.

  Spencer Merci for your time and suggestions,

  Best regards

  Larry

• Windows cannot print due to a problem with the installation of the current printer.

  Thread title: Epson TX235W will not print

  When I click on 'print', I get the print control. the box that tells the printer how many copies, etc.  When I toast 'print' it get a little box that says Windows cannot print due to a problem with the installation of the current printer.  Try one of the following:

  Check the printer by printing a Windows test page

  Ensure that the printer is online and on

  Reinstall the printer driver

  I did everything above and I get the same result.

  Help!

  Hello

  Did you of recent changes made to your computer that caused the problem?

  This problem is limited to a particular application?

  How is the printer connected?

  Method 1) restart the print spooler service and delete the print queue

  Start the print spooler service in the Services console

  1. Click Start and run, type services.msc, and then click OK.
  2. Right click on the print spooler service, and then click on stop.
  3. Right click on the print spooler service and then click Start.

  Start the spooler service for printing at the command prompt

  1. Click Start, run, type cmd, and then click OK.
  2. Type the following commands at the command prompt:

     net stop spooler
     net start spooler
     Output

  Note: Press ENTER after each command line.

  Cancel printing

  http://Windows.Microsoft.com/en-us/Windows-Vista/cancel-printing

  Method 2) remove and add the printer and then check.

  Add or remove a printer (Applicable for Windows 7)

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  It will be useful.