Excite AT10LE-a broken back

Similar Questions

• Toshiba excites AT10LE Pro supports USB HOST?

  Clearly, I need to know if this tablet EXCITED AT10LE-A-108 supports usb host I can't get any information on the web...

  anyone? Thank you

  Sometimes a user manual control can be useful :)

• Excite AT300 not turn back to all

  Noticed these last days, that the battery icon was red with exclamation point, even if it has been fully charged and when you check in the settings it shows battery with 10 remaining hours information.

  The Tablet since acting very strange.
  From time to time, it starts to vibrate for a second cutting when your working on something and the other day, he is stuck in vibrate mode until I have shutdown and restarted.

  I have no sound now when playing music and videos and the time and date changes randomly too.
  I turned it on this morning and the date was set in 2005?
  I then reset the date and close, now it not turn back at all?

  Any suggestion or help will be appreciated with gratitude
  Concerning

  Are you able to perform the hard reset?
  For that you must press and hold the power button / stop and button volume up at the same time.

  The menu would provide a few options. One of them would be the factory reset.
  Give it a try.

• Excite AT10LE-A-108 Pro gel at startup

  Hello world

  can anyone advise me on what to do. Today, my Tablet stopped working on switching on after the Toshiba logo appears the Tablet freezes shortly after while the sparkle screen display. Can I reset everything or go another way to diagnose what happened? I don't know about these things so that any help would be appreciated. Thanks in advance.

  Hi all... I have the sort with a factory reset.

• Toshiba excites Pro AT10LE-A-108 the battery

  Hey everybody,

  first of all, I got a Toshiba chance excites AT10LE-A-108 Pro in a common store in Germany.
  Everything was good except the battery won't charge.

  He always showed 0% after plugging the cable it immediaetly turned off and would not turn on without the cable connected.

  Then I got a brand new Toshiba excites Pro AT10LE-A-108.
  I did all the updates, while I was already wondering because the batterystatus switches always between 0% and "full."

  After several hours, I plugged the power cable and the same story the Tablet immeadetly turned off. Yet once, wouldn't turn on without the power cable plugged in:)

  Now its all yours :) It is just bad luck, or is this a common problem?

  What I have to change something in the settings?
  I don't know and I'm not going back again via post :(

  Best regards, Tom

  Hi Tom

  I don t think that it is a case of some incorrect settings.
  To me, it seems that the battery does not charge and from my point of view it s a hardware problem of battery.

  I think you have two options for a fix: you can try to get another new AT10LE-A feature from a dealer or you can contact the maintainer authorized Toshiba in your country for a fix.

  On Toshiba supports support ASP page, you can find the service partner in your country in the region.
  http://www.Toshiba.EU/innovation/generic/ASP_SUPPORT/

• Satelite A660 broken HDD - how to get it back after warranty repair?

  Hi all

  Two weeks ago, I bought the Toshiba (satellite A660) computer and it broke after 10 days of use. I gave it to the point of service and they told me that the hard drive is broken and only thing they can do is to replace it again. I asked them what happened with my old drive because I have some important files on this subject and I need them back. So they said they can't give it to me because they have to send it back to the producer. Is it possible for me to recover my old hard drive? Maybe someone knows where they send these broken drives and maybe I could write directly to this place?

  Thanks a lot for all the replies.

  Hello

  I think that you will not get the disc HARD broken back because you have a new HARD drive as a replacement.
  I guess that the ASP must follow certain service policies and possibly any broken parts must be sent to the laptop or the part manufacturing.

  With regard to the files on the drive HARD;
  Well, you should back up all data before sending the laptop to the service. I think this is mentioned in all the manuals of all computer/laptop manufactuers...

  However I doubt that you would be able to retrieve the data from the old HARD drive (if you have this old HDD) because it was already broken
  In most cases, it is not possible or it is a very expensive procedure to back up data from broken hard drives.

  Anyway... in my opinion has nothing to make :(

• IdeaPad Y400 keyboard broken after installation of Ubuntu. Sent in, Lenovo has sent back still broken.

  I have a Y400 Ideapad, purchased in December 2012, delivered with Windows 8. He has recently due to a malfunction after trying to install Ubuntu as a secondary OS. It was very difficult to get installed Ubuntu because UEFI and Secure Boot really tried to stop him, but I have finally installed it and the two operating systems, has been working for about 24 hours. Then, Ubuntu was able to start. On several occasions. Then I started Windows and it seemed that he was working again, except that from time to time when I tried typing, the keyboard type keys I had not touched and then stop responding for about 30 seconds. After that, it would still work for a little while.

  I ran OneKey Recovery to try to solve this problem, wiping my hard drive and reinstall Windows 8 from scratch. Still doesn't solve it. He actually glitched once while I was still setting to the top of my Windows profile, before he had even started for the first time.

  So I sent my laptop for Lenovo and, a week later, they sent back with a new keyboard (despite me telling them that it probably wasn't the problem). He worked for the next few days, but as of today, he started glitching again, much. I don't want to send my laptop for Lenovo again because I need for the class I'm taking. Also, when they sent it the first time, they have not even put it together right. The rear panel was not at bottom, and panel below which was actually folded so that one of its tabs fit on the side of my laptop instead of being inside.

  I really need to solve this problem, but I'm doubting the capacity of Lenovo to do, and I don't want keep it will send if it simply means that I won't have a laptop for 1-2 weeks and then I'll get it broken back yet more. Also, I need even Ubuntu, even if they do not fix it then I have to reinstall Ubuntu and it will probably break again. Not to mention, they will probably wipe my data from it.

  Found a thread discussing this:

  http://forums.Lenovo.com/T5/IdeaPad-Y-U-V-Z-and-P-series/IdeaPad-Y400-keyboard-auto-typing-and-out-o...

  Turns, the Y400s have a defect. If you select always "on USB" in the BIOS / menu UEFI, it messes up your keyboard. I have activated it when I was trying to get my computer to recognize a USB boot.

  I'm surprised a Lenovo support is not already aware of it. I talked to Lenovo about a dozen employees, including a supervisor and a representative of the customer relationship and no one suggested she could relate to my BIOS settings.

• Cannot print using HP photosmart C3100 printer

  Original title - printer problems?

  I have a HP photosmart C3100 printer. It has been giving me problems in the sense that whenever I turn it on it would be the test of the printer which is routine, each time you insert a new cartridge. I opted to leave it on and like that I do not lose excess ink. Now the red light indicating that you are in paper or a paper or door jam in the broken back remains open on and I cannot print. Any ideas other than buying a new printer?

  Moved from feedback to windows where it belongs

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Photosmart HP5520: HP 5520 Photosmart All in One printer does not print

  Hello

  I was away for a few weeks and when I got home that my HP 5520 would not print. Troubleshooting in devices and printers did not fix it. The full current confirmed printer HP S/W installation wizard and the drivers installed. The installation wizard produces a test analysis, but not a test print.

  Print and scan doctor also identities printer OK but cannot produce a test print, even if it did not produce a test INTERNAL page. Printing and scanning identified an issue with the S/W which "cannot be fixed without uninstalling and reinstalling" the software.

  Software reinstalled as suggested, but it has stalled on "checking network das" so reinstal is not completed properly I guess. Now, I seem to be less well off than I was before.

  I checked the print spooler and its running ok.

  I checked windows udates and they are all up to date

  I even tried restoring the system in desperation, but that has not changed anything either.

  I tried using just USB connect - no effect

  I have true wireless use only for connect - no effect

  I am running windows 10 on HP pavilion laptop.

  I'm running out of ideas on how I can print again, so any help would be greatly appreciated!

  Thank you very much

  This is the solution, for me at least. I was convinced there had to be a solution of windows related to this, but despite several attempts, I could not get the answers so ultimately I reset the PC and it took about an hour, but when he did all broken back in life and has worked as before. Bit of a pain having to reinstall software but it was worth it.

• Ruined my phone, need help with fixing!

  So it was one of those days, my phone fell on the floor and the back has completely broken but he was working, but then I spilled some Pepsi on this so I decided to rinse it out until it is clean, because you know, it is impervious to water and other things but now not only is the broken back the screen started to Flash and then no longer start and he is constantly flash fire red in the corner of the phone when he's in charge.

  I know I did wrong probably wrong but is there a possible solution?

  Hi Ziad_

  Welcome to the community! Since you are new, please make sure that you have removed from our Forum.

  I advise to contact Sony Xperia customer service as soon as possible because your phone will need to be sent to a service center.

• With the help of VWmare on my Windows 10 machine & I need an OEM Windows 7 Ultima Pro 64 bits for Xilinx Vicado to run

  I am development engineer and my material design of Xilinx Vicado package will not work in the new Windows 10. I said that he can not find running libraries etc.. They use batch to determine if the directories exist etc. Well, I've spent big buck to get the latest version of VMware. I install my OEM of Windows 7 Ultra Pro 64 bit version and install the key software must work. So after you have installed, the activation of my key does not work. I made several suggestions, but it is not supported anymore. Yes big problem so it is not supported, I understand that I watch the news and reading materials. I use Microsoft products since the first Windows 286 and spent a lot of money using your products. So Microsoft is going to fuck me a disable us marine veteran? After paying my bills every month I $168 to feed my son and myself. I may as well cancel all subscriptions and eat food, but I'm 65 years old and that I have to keep my mind active but a brain injury, broken back and I might as well jump off a cliff, but I love my child and myself. So tell me how are you going to fuck me.

  James Wm Hussey

  E-mail address is removed from the privacy *.

  Hello

  Thanks for posting your query in Microsoft Community Forum.

  According to the description of the issue, I recommend you post your query in the TechNet Forums. TechNet is watched by other computing professionals who would be more likely to help you.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=W10 '

  Hope this information is useful.

• HP DV6 recovery HELP! With the help of an external display because of the screen broke

  Hello and thank you all,

  So I have a dv61149 windows7 running with a broken screen, the screen has not been a problem so far that I have an external monitor via VGA. Now I have to do a cover of the factory, but I don't see what I do once my computer reboots into recovery!

  HP Recovery Manager says his will reboot in recovery environment, very cool. but I'm sure theres buttons to hit after the reboot... so. pWnd?

  Thanks for the reply but I fixed it myself. I could not buy a new screen. obviously. so I disassembled the laptop computer and completely deleted my screen. now when I boot, the computer can't find it so it automatically sends out video via vga. I see same BIOS now.

  Hope this helps anyone else with this problem. take apart seemed to be a huge task but it wasn't bad at all, my computer pretty much had like 15-20 screw the rest just broken into pieces and broken back together, it was pretty easy.

  using HP DV6 1149WM

  Good luck

• EchoSign and combine files after

  The difficulty to combine files into one big document No not as a portfolio.  How is that possible?

  Hello

  You can download several documents in a sending unique transaction. EchoSign will combine then all documents in a single PDF file for the duration of the signing process. Then you can adjust a setting for your account in order to choose to have the PDF document signed or kept in large format PDF is broken back up in the various documents that have been uploaded.

  Thank you

  Jat

• Movie Clip (with script) of nesting in button

  I'm pretty new to Flash, I have the basics but struggle when it comes to tasks more complex requiring a code etc. My problem seems simple in theory but in practice it's a different story; for me anyway.

  First stop, I create an online gallery. It is made against several thumbnail images of the art of the pieces which, when clicked, show the image in a larger format. I reached this goal in duplicating the chassis 12 times (how many images it is on the page) and linking each miniature to its corresponding image that runs through frames 1-12.

  I had this working perfectly, except for my animation of miniature mouseover who did very well when the mouse is in the affected area, but once outside the animation just broken back. This was done simply by nesting a movie clip symbol in the State over the button (that does not need any code).

  However, once I searched the internet for ways allow the animation to return to his State not active with an animation of back once the mouse is over the affected area, I hit a new problem entirely. Of course, this effect required some basic coding and was not pressing the button a on the State to activate the animation. This means that when I tried to embed the new animation in the zone reached the animation button was on the button, its ability to disable link area.

  I've tried everything I can think of, but I can't get the animation that will be triggered when the user hovers over the button and allow the button to link to its framework.

  I know this is a long post and thank you for reading. If you don't know what anyone that I said, please ask. I'll also give you a link to the tutorial I used as a base for my animation to be nested within the button. (http://www.kirupa.com/developer/mx20...ton_effect.htm)

  Thanks again.

  If 'frame2' is your label and not "frame2_Page 1", you must use:

  Stop();

  this.onEnterFrame = function() {}

  if(Rewind == true) {}

  prevFrame();

  }

  }

  this.onRollOver = function() {}

  return = false;

  Play();

  }

  this.onRollOut = function() {}

  Rewind = true;

  }

  blakeheaps.onRelease = function() {}

  _root.gotoAndPlay ("frame2");

  }

• Photoshop CS3 won't open in Windows 7 after works perfectly?

  I just installed Windows 7, 32-bit version last month. I reinstalled all my programs, including InDesign and Photoshop CS3. InDesign does not work well. Photoshop CS3 worked fine until last week. One night Photoshop does not open! I have tried everything I can think of-removal of preferences (it took me three days to find out where he was, and Ctrl-alt-shift does not work) and delete a new program for playback of videos which was the only new program I had installed (just in case), then "repaired" the Photoshop using the original disk.

  Finally managed to get into Photoshop BUT: everything is twisted - colors are off, PS tells me I only 1 600 MB of RAM, when I know that I have 2 GB installed, it seems really strange - everything is gray out checkerboard.

  This is my third post on this issue - CAN someone HELP me?  I've been without my Photoshop for over a week, and desperately need to get that back. I'm just now getting back on track, trying to get my site, and al. After almost a year out of service due to a broken back and the computer crashed. Now, I have my computer back and can not use PHOTOSHOP!  Help!

  In addition, my computer suddenly said "we had to go back to the basic Windows color scheme because there is a program that needs it (?), and then my office is all messed up. I can't get my color management back - in turn computer and turn it on again and then all is well. This always happens after trying to get into Photoshop.

  Please send me an answer because it's getting very annoying and debilitating. ([email protected])

  Post edited by: Taylorgraphics

  Update your video card drivers on the manufacturer's Web site.