Execution of the BR on the members of read access

Similar Questions

• The execution of the sequence TestStand in LabVIEW via TS - API: execution different times for the same sequence

  Hello - the members of the Forum.

  I have a problem about the execution of a TestStand sequence into LabVIEW. I created a VI that offers the possibility to choose a sequence TestStand-file and then executes the sequence using the TestStand API. The implementation is based on an example in C++-Application found the following link:

  http://forums.NI.com/T5/NI-TestStand/unreleased-references-using-engine-API-in-C/m-p/2927314#M46034

  The app works pretty solid where the VI is executed the first time. The VI treats the sequence chosen in an acceptable time.

  But where execution is started again, the sequence takes approx. 30 sec more than in the first case.

  So far I have not found a solution and hope someones got a clue about this problem...

  I use 2013 LabVIEW and TestStand 2013.

  I enclose my own VI, a sequence of the specimen with a small sample of VI, so you can reproduce the problem.

  Kind regards

  TobiKi

  
  

• after update Friefox, why I don't see a chat next to the members option online chatting about google?

  I have updated my firefox and all the plugins. I see no chat next to the members online option on my chat list. If they send me the message with the cat, I can't write their return but I can't launch the cat.

  Can you give a screenshot (with no private information blurred) that shows what you see?

• Only one execution at the time the application

  What I'm trying to accomplish: that only cover the execution of the application can run simultaneously.

  Is there a setting of TestStand I'm not find which would allow this?

  As a solution, I do something along the lines of aging on execution buttons in the IO at the beginning of the process template and allow them to the end.

  Thank you

  Seth

  
  

• Sequential execution of the structure of the event?

  Greetings,

  I'm at the very beginning of the development of applications. I have a list of 10 tests (we just call test 1 test 10). I would (ideally) for a user to have the option of selecting 1 or even 10 tests, any combination basically (listbox, it was what I thought). Now the kicker is, I want a structure of event related to this list box. And run each index table selected by the user. So if the user must select test 1, test 2 and test 6, I had received a table of 0, 1, and 5, respectively. The structure of the event should run sequentially as a result. Right now I plan each event at the outbreak would run a state machine for the test itself. So if test 1 was a simple test of current draw (just for example). The user would choose 1 Test that raises the corresponding event. The event inside a state machine would execute the necessary market, TAKE the MEASURE of CURRENT, STOP says finally.

  I've tried my hand at a cluster with Boolean values, but did not too far. Even though I know there is a solution somewhere within the cluster and the binder for Boolean types inside for the value change. But I need allow the user time to choose all the tests to run before launching the sequential execution of the structure of the event.

  I'm sorry if I missed something, I am still drinking my coffee Sunday I do not have a VI to post. I tried yesterday with no luck and the best test I had too many nested loops.

  Thanks in advance for any help in this matter. I feel I've hit a moment "DUH" in the development process. But I find it difficult to set up a structure of the event to run several events in the event generated by 1 user.

  -Chazzzmd

  
  

• Launch by programming a sequence file don't switch for execution in the user interface

  TestStand 4.2

  LabVIEW 2009

  Windows Vista Business 32-bit

  My movie file uses a SequenceFileLoad reminder to start his own execution automatically by using the entry point TestUUTs. This is accomplished by calling the Engine.NewExecution method. The problem I have is that my custom LabVIEW user interface does not switch to the view of execution when execution begins. If I manually start the execution using the TestUUTs key, the point of view of execution is displayed.

  In my interface user, changing the display of the sequence at the sight of the execution is done in the event callback, DisplayExecution, and the StartExecution event reminder. I also tried the ExecutionChanged event reminder, but realized that it did not apply in this case. The complex UI that comes with TestStand works correctly and, as far as I know, I use the same event reminders to manage change in my user interface.

  Any ideas? What Miss me?

  Thank you

  Toby

  CLD, CTD

  I realized what was going on. I was to switch it on the SequenceView using the ExecutionClosed callback, but was not checking the number of executions that have been opened. Opening my file of sequence autolaunching would open two executions, one to open the file and the actual execution of the file. As soon as the file has been opened, the first run was closing my UI to return to the display of the trigger sequence. Execution else had already begun the execution of the sequence file so he would continue to run in view of the execution, but I didn't see it.

  I now use ApplicationManager.Executions.Count and only to switch back to the SequenceView if it was not open execution.

• How to lock "Write to file measure VI" during the execution of the request for this file cannot be opened during execution.

  Hello

  I have an application where I am external hardware data acquisition and save it in a file using "Write to measure file VI.

  During the application run on time; When the user opens ".» LVM text file "; abendons-saving application of the data obtained in the prescribed file but continues to demand on external hardware data acquisition. When I stop the application; an error message is poped indicating that an error has occurred due to open running.

  My question is: How can I block this file in which the data is saved, so that the user cannot open it during the execution of the application?

  Looking forward for your kind suggestions in this regard.

  Kind regards

  Jamal

  Hi Jamal,.

  It has been said many times before: use simple simple file features!

  

  Opening a file with a default access "read/write" will disable access to this file to other programs!

• Can the Format date/timestring service that can control the execution of the loop to a VI?

  Can the Format date/timestring service that can control the execution of the loop to a VI?

  Example,

  a VI is running at August 25, 2010 and print a txtdata(3)) '100825.

  Then follow when time system running at 2359hrs, August 25, 2010 at 0000hrs, August 26, 2010.

  and print a txtdata(3)) '100826.

  How?

  When the system changes a new date, problems occur.

  
  

• delegate method calls to the members of a class

  Hello

  I'm new to LabView and using the 2013 version.

  I am familiar with the concepts of object-oriented programming.

  situation/goal

  I have a controller that controls axes. The controller said communication happens via plain text messages.

  I want to control the two axes with orders abstract (moving, stop, speed change, etc.) of LabView.

  That's why I created a class of axis with several parameters. (although)

  The controller communication is established via an ActiveX reference.

  I created a controller class that holds said reference in addition to the two axes.

  My goal here is to create a controller object, which past its ActiveX reference for the two axis.

  To add lines to the controller I dragged the class axis from the window of the class controller twice overall project.

  I created some accessors to all members of the class of the axis, including its ActiveX reference.

  problem

  In the Set accessor method for the controller class ActiveX reference, I would like to call the setters for the return of the two axes objects that contains the ActiveX controller.

  I can separate the controller to see the two axes, but I can neither unbundle either of the axes nor can I add a method node to them.

  It is logical that the separation is not possible to ensure encapsulation, but why can't I just call a method?

  Am I still add references to objects when you drag the axis class?

  Or is what adds the class itself?

  If this adds the class, how can I add a reference to an object of a certain class as a member of another class?

  I've attached a screenshot of the controller class.

  Thank you for your help.

  Hello

  The object Oriented Design is rater hard. Encapsulation banned, as you said, the data from your classes are defined outside their class.

  In your case it means that you have to create a data member access VI inside of the class of the Axes. These access screws (methods) allows you to set the values for these axes of type two objects inside of the controller of the class. Make sure that these two classes are in the less community.

  You can refer to a class using reference data value, Yes, BUT in this data type to the reference class is included. At the time, it seemed more convenient: LabVIEW programming job: The decisions behind the Design http://www.ni.com/white-paper/3574/en/

  Self an example here:

  Examples for the new reference value of data with the Forums of Discussion LVOOP https://forums.ni.com/t5/LabVIEW/Examples-for-New-Data-Value-Reference-with-LVOOP/td-p/1317493

  If you want to use data heavily references, I would recommend the GOOP package, which has different design questions build in singleton as etc. (which are not possible by default in LabVIEW)

• go to the next iteration of loop for and continue execution of the previous iteration

  Hello everyone,

  I want to run a loop with an offset to each iteration. I explain: I want to run a task multiple times (for loop), but with a variable delay in each iteration.

  Thus, if we put t = 0 before you run the loop and I use 3 iterations. I put a writ of execution to the first ieration after 3 sec then skip to the next iteration of course without waiting the end of the previous iteration and run the current iteration after 1.5 s and go to the third ieration (once again without waiting for the latest iteration).

  I conclude: this is a simultaneous execution of a for loop (10 to 50) from different eras (variable time between t = 0 and each running of each task.

  The problem I found in the loop is the fact that I have to wait the end of the time delay in each iteration bfore going on to the next.

  Best regards

  In all languages, a loop iteration FOR happens AFTER previous.  However, go with the parallelized FOR loop can happen to you.

• execution of the program missing from the bottom of my Start menu

  execution of the program disappeared from the bottom of my menu start how do new

  1. right click on the start menu
  2. click on properties
  3. click on customize
  4. click on advanced
  5. search for 'Run' and check the box
  6. click on OK

  In addition, you can press the Windows key + R to bring up the run window.

• During execution of the backup and maintenance on one of my computers, I noticed a folder and the file that I can't identify me...

  Original title: identity of unknown folder

  During execution of the backup and maintenance on one of my computers (Windows xp home, sp3), I noticed a folder and the file that I can't identify.  The name of the folder is cc68f6b7a7ca948eefb018f001 and the name of the update.exe file.  The properties of the file that it is a Windows Service Pack installation.  I tried Googling the name of the folder, but found nothing.

  Can you tell me with regard to this issue, and what, if anything, I have to do?

  Thank you.

  When some programs (including Windows) installs things, it can create a temporary folder composed of 20-30 random letters and numbers or random numbers and letters in the root of the drive of the volume with more free space.

  This explains why the records are sometimes on your C drive or any other drive - the most space?

  For example, you can see a similar to or called folder:

  D:\9470bb12e8a4f3447657236478e41c5

  There may be other folders and files in this main temporary folder such as amd64 and i386 platforms.

  They should normally be deleted when the installation is complete, but sometimes they are not - especially if the installation fails.  They are harmless but annoying.  You can think something is wrong when there are no or fear, that the files are really necessary.  To avoid confusion, you can delete the temporary files.

  If your installation has failed or the installation does not remove the folder to the random name when it finishes running again installation will be another folder at the random name.

  You may be able to identify installation (out of curiosity) by looking at some of the contents of the folder and decide if this installation was not serious, just remove the files/folders.  If the installation does not work for some reason, run again just installation will create a new temporary folder to the random name so the old temporary folder is really useless.

  Records are sometimes tough to remove.  Even if you are an administrator on the system, you might get a "sharing violation", "access denied", "used" or type similar message when you try to delete temporary folders.  Facilities sometimes use different permissions that can have a regular user with the administrator group.

  There are many methods to try to remove the folders, and some require third party programs to install or change some windows settings that could compromise the security of your system if you do not change them back when you're done.

  Start your system in Mode safe mode (by pressing the F8 key several times just before XP attempts to load) is one good method to try to remove the files because it does not have to make any changes to your system configuration or by downloading third-party programs.

  If you are running XP Home Edition, the following section on turn off "Simple file sharing" does not apply to you since in XP Home, Simple file sharing is always turned on.  If you are running XP Home Edition, skip the next few paragraphs and resume where it says:

  "If no part tool above work try a third popular called Unlocker.

  If Safe Mode does not work you can change the security of the folder when you start in Normal Mode to give your username full control over the files by navigating to it in Solution Explorer, click on tools, Folder Options, view and in the advanced settings window, uncheck (at the bottom of the list) use simple file sharing (recommended) and click OK.  This disables him recommended simple file sharing on your computer if you want to turn it back on when you're done to make everything you do.

  Right-click on the files of interest, click Properties and click the now visible security tab.  Change the properties, but you need (for example, select your user name, and check the box to allow full control), click OK to apply the changes.

  With usage share of active simple files (recommended) the checked the properties of the folder tabs are:

  General, sharing, customize

  With the use of sharing files simple disabled (recommended) box unchecked, the properties of the folder tabs are:

  General, security, customize

  Now, try to manipulate/delete the folder.

  It's a good idea to go back to the Explorer and the cheque in the box easy to use sharing files (recommended) when you have finished making everything you do.

  If none of the above works, try a popular third-party tool called Unlocker.

  Unlocker can be downloaded here:

  http://www.emptyloop.com/Unlocker/

  If you use Unlocker, be sure to install because he wants to add a bunch of options, addons, shortcuts and other extras that you don't need.

  You must add the shell extension so when you right click on the offending file, you will have a Unlocker option to choose.  I would just install it long enough to clean up the leftovers and then, I usually just uninstall and all parts of it.  You can always install it again another day if you like.

  Unlocker can be uninstalled when you have finished using it.

  Reboot when finished to ensure that boring records are really missing.

• Opengl32.dll is not designed to run on windows or it contains an error. I reinstalled the graphics drivers. During the execution of the games, it shows this error. What should I do to fix this?

  Opengl32.dll is not designed to run on windows or it contains an error. I reinstalled the graphics drivers. During the execution of the games, it shows this error. What should I do to fix this? Is it a graphic file or a file from microsoft?

  Hi Jason,

  1. What is the number of brand and model of your system and graphics card?

  2 did you a recent software or hardware changes to the system?

  This error can be caused by an application, including any old games you have installed on your system.

  Because you tried to reinstall the drivers for video card, you can try to perform a clean boot and check if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• BEFSR81 and static IP to be assigned to the members of the network

  It's perhaps a little noob question.

  I have to (192.168.1.2 DHCP server OFF, wireless) WRT310N cascading through my BEFSR81 (192.168.1.1, DHCP ON), but for the life of me I can't understand where they were hiding a DHCP reservation. If there is no page for it, I was unable to find anything that looks like a workaround solution. I want to put in place so that the members of my network get the same IP addresses addresses DHCP and time "guests".

  Can someone help me?

  Thank you

  Marshall

  An obvious option is that you can replace the BEFSR81 with almost all new Linksys routers.  You can use the RVS4000 (a DHCP reservation has been added with an update of the firmware), or you could use a wireless router and turn off the wireless.  If you're thinking the RVS4000, know that it can handle only about 15 Mbps of throughput of your Internet connection, so if you have a faster connection, you'll be out of luck with this router.

  If you wish to continue using your BEFSR81, note that Linksys has certain rules very specific on how to manually setup fixed LAN IP addresses in your network devices.  You must follow these rules carefully.

  Rules for use of the LAN IP fixed address on the Linksys routers:

  With Linksys, routers, a fixed (static) IP LAN addresses must be assigned in the device that uses the address. If you enter the fixed address to the computer or the printer, not in the router.

  When you use a Linksys router, any fixed LAN IP address must be outside the DHCP server rank (typically 192.168.1.100 thru 192.168.1.149), and may not end with 0, 1 and 255.

  That's why any fixed LAN IP address would normally be of the order of
  192.168.1.2 thru 192.168.1.99 or
  192.168.1.150 thru 192.168.1.254
  assuming that you always use the default DHCP server line.

  In addition, in the computer, when you configure a static LAN IP address, you need to set the "Subnet mask" 255.255.255.0 and the 'default gateway' on 192.168.1.1 and "DNS server" on 192.168.1.1

  It is also important that the same value static LAN IP address no two devices on your network.

• An error [-5005: 0 x 80070002] occurred during execution of the installation of magictune

  Original title: uninstall magictune

  I am running Windows 7 64 X.  By mistake I have install MagicTune Premium.  My laptop is Toshiba Satellite P799 with Nvidia GT 540 M.  I tried to uninstall it using the program and functionality but receive the following error message:

  An error [-5005: 0 x 80070002] occurred during execution of the installation

  When I click OK, it brings me to the Samsung download web site.  I repeat the download and then restart.  The coup explore whenever I try to run.

  I always unable to uninstall it.

  Grateful for the help

  Thank you and best regards,

  JC

  Hello
   
  
  Follow these methods and check if that helps:
  
  Method 1:
  
  

  Try to uninstall the program in clean boot mode and check if it helps.

  
  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7.
  http://support.Microsoft.com/kb/929135
   
  Note: Don't forget to reset the computer to start as usual when you have found the culprit. Follow step 7 on top of the kb article.
   
  Method 2:
  
  I suggest you follow the troubleshooting steps form the article and check if it helps.
  
  How to solve problems when you install or uninstall programs on a Windows computer
  http://support.Microsoft.com/kb/2438651