Execution.ResultStatus is empty.

Similar Questions

• Runtime error in the model of process and sequence still happening

  I do initialization custom in the process template (in the recall of ProcessSetup). I call a .NET module which can throw an exception in certain error conditions. This causes him the process model to access the cleaning section of the process model (not the client sequence files cleaning) and that's okay. The problem I have is that I'm in my UI of the event AxAppMgr_ExecutionEnded and e. ResultStatus property argument exec indicates "success." I want that it says 'Error' or 'Incomplete' or something other than the past. The sequence of client never ran at all. While she had no failures, he could spend.

  How can I force the State to 'Error' or something other than "success"?

  Before check Execution.ResultStatus, you can check Execution.ErrorObject to see if an error has occurred and to obtain if necessary error information.

  Do something like:

  ErrorObject PropertyObjectPtr = run-> GetErrorObject();

  If (errorObject-> Exists ("occurred", 0) & errorObject-> GetValBoolean ("occurred", 0))

  {

  _bstr_t msg = errorObject-> GetValString ("Msg", 0);

  Add some other code you want here.

  }

  Hope this helps,

  -Doug

• How can I stop in case of failure?

  We have developed a c# application that manages the execution of a test sequence.  Currently, our code opens a test via the call execution:

  seqFileViewMgr.GetCommand (CommandKinds.CommandKind_ExecutionEntryPoints_Set, 1). Execute (true);

  It detects the completion of a test via the EndExecution event execution and I determine the overall looking at Execution.ResultStatus in my EndExecution event handler callback.

  They changed the conditions and I need now to detect the State of each step and (if requested) stops execution of test when a step fails.  Can someone enlighten me please know what changes I should do for my design to achieve this step by step of the monitoring?

  There are certain features that may interest you.

  Break failure - toggleable setting located under the run menu in the sequence editor and can also be set through the API with StationOptions.BreakOnFailure or StationOptions.BreakOnSequenceFailure

  Goto Cleanup on the failure sequence - this is a frame at the bottom of the first page of the dialog box options station and may also be defined by the sequence in the sequence Properties dialog box. It can also be set programmatically using Sequence.GotoCleanupOnFailure or StationOptions.AlwaysGotoCleanupOnFailure.

  SequenceFilePostStepFailure reminder - this is a sequence of special reminder, that you can create in your sequence files that will be called whenever a step fails. You can add a special code to this reminder to customize what happens when a step fails in different ways.

  Hope this helps,

  -Doug

• Get the result of the sequence by programming

  Hi all

  in my custom operator interface to save the event EndExecution callback to accomplish several final operation.

  What I can't do is to retrieve the result of the sequence ('Success' or 'Failure', exactly the one that is displayed in the default report under the voice "Result USE") using methods or properties API.

  I've tried Execution.ResultStatus property and the SequenceContext.SequenceFailed property, but none of them works.

  How can I get the result of the sequence?

  Thank you

  Process templates are already generating a Message from the user interface "TestingComplete" you can register an event reminder on.  It also transmits the result as part of the parameter string State.  The attached excerpt from LV show what the VI recall may contain to handle the event.  If you need to deal with other UI event codes you can wire the event directly number in the structure box for the 34 decimal 'TestingComplete' event code.

  P.S., the event is the same that Norbert has pointed out, event UIMessageEvent...

• Bay of cluster fails to initialize constantly

  I have a program where I have a table of cluster that enters a while loop like a shift register, and then is then indexed in a loop for to act on each item individually.  To do this, the Bay of cluster must be initialized before the while loop, otherwise an array of length zero is indexed, preventing the for loop execution and an empty array is sent for the shift register to start over the mess.  My problem is that the table does not initialize whenever I run the program, leading to repeated failure I have just described.  This issue is particularly worrying because of its inconsistent nature.  To save you the headache to interpret my entire code, I have summarized the situation in the attached example.  This example seems to work properly, adding to my frustration.  Is there a fundamental flaw in this design that could become more visible in a code more complex?

  After further analysis, I found my problem.  In my program, I have several tables that are all indexed to the nested for loop.  While the Bay of cluster attached to a registry change perpetuates the error, a different picture suffers from a race condition that triggers the error.  During the first iteration, this table might have length zero, preventing execution loop and causing the cluster Bay correctly initialized in the shift register with a length of zero.  In troubleshooting, the obvious symptom was the Bay of empty cluster but the cause was elsewhere.  Thanks for your comments.

• How to detect the State of a LabVIEW test success/failure

  Which variable TestStand should I read to determine the State of a test of TestStand set success/failure?

  I use the parallel model and LabVIEW can see index of my process with the variable "RunState.TestSockets.MyIndex", but now the LabVIEW needs to know if this process was successful or failed the entire test.

  Possible, recommended to capture those (so do not use the "built-in controls visible TS') is to capture the UIMsg_EndExecution (which is generaated automatically if the engine ends an execution).

  This message to user interface, you can access its data, one being the property of Execution.ResultStatus and execution.

  See using TS for the possible values of ResultStatus. This allows to control indicators on your UI.

  hope this helps,

  Norbert

• Question about deleting of the LDAP user and integration

  In the Document "Management Console Help", he States:
  
  "You can't invite accounts of users that are mastered in a user directory LDAP; These accounts are created automatically when you synchronize the LDAP directory. »
  
  This means that after you configure an LDAP domain, the users specified by the filter should be automatically attracted to OnTrack? I don't see the ldap users during execution of an empty search for the administration console. At this point, I can also connect to the OnTrack using a valid LDAP user. I was trying to see if OnTrack worked similar to the Complutense University of MADRID, where the OnTrack user account would create once the user logs in the application.
  
  What I can do, is go to "Create a user" and enter a valid ldap user's email address. then I see this user in the full search. This user can also connect successfully.
  
  I wanted to know what was the expected behavior: it should be a 'register' required ldap users in ontrack before auth in the app? Is there a synchronization process that must be executed to pull in the ldap users?
  
  Also, is it current best practices of removing users? I see in the administration console there is a note that says: "Note: removing users is not supported."
  
  As always, thanks for the info!
  
  
  Thank you
  -ryan
  
  Ryan Sullivan | ECMconsultant
  http://www.ecmconsultant.NET/
  

• Empty container DAC after execution of 'New Source system Container'

  Hello

  I am trying to create a copy of an original container Oracle 12.1.3 fresh installation to boot configurations. While the copy is completed successfully, the new container is empty. Am I missing a step right after the copy?

  Thanks for the help!

  M.A.

  Hello

  I checked the logs and there is an entry of the following error:

  Cannot create reference

  ORA-01536: space quota exceeded for tablespace "XXX".

  I increased the tablespace and re - run the copy.

  The copy completed successfully and all components are available.

  Thank you.

  M.A

• Open recent in figures and empty Pages all of a sudden.

  Just today, when I opened the command of numbers and Pages open recent is empty. I've used both for several years and it started today. I saved and closed several files that had changes in them and in numbers it remains empty. Again, this is new. I used the numbers a week ago and there files then. No change of os

  Execution of Mac BOOK pro with os 10.11.5 numbers 3.6.2 Pages 5.6.2

  Hello junglejim,.

  Welcome to the communities of Apple Support!

  It seems that you are having problems to open recent documents in Pages and Numbers because the lists 'Open the recent item' are now empty. I know how it is to use the option "Open the recent item" for quick access to the documents you have worked on so I can understand why the suddenly empty menu would cause concern it.

  If you are unsure that you have accidentally selected the "Clear Menu" option at the bottom of the "Open recent item" list, there are a few other things we can explore to refine the why this happened. The first would be bound to an external hard drive. If you have a hard drive connected to your Mac where you saved your number and documents Pages and you disconnected the disk, it can cause the "Open recent item" list is more to show those who record the items.

  Another possible cause can be the settings of your Mac. Follow these steps:

  1. Open on your Mac System Preferences by clicking the  logo in the upper left corner of your screen.
  2. Select 'General '.
  3. Down, select the drop down beside where it says "recent items". If the "recent items" are defined as 'none' instead of the number, it can cause you to display more recent documents in number and Pages.

  Although your documents to appear in 'open the recent item"currently, you can still locate these documents if you have backed up on your Mac, an external hard drive or iCloud drive. If you do not save your documents as you work on it, I highly recommend that you start doing so to proceed in order to avoid data loss. In case you are not familiar with iCloud drive, here are some great resources for her:

  iCloud drive. Any type of file. On all your devices.

  iCloud Drive FAQ - Apple Support

  Once you have made sure that the "recent items" in the preferences system is not set to 'none', your next step would be to open or to create a few documents in number and in Pages, close and reopen the number and Pages, and check if these documents, you have just opened, created are showing in 'Open recent' to ensure it works as expected today.

  Thank you for using communities of Apple Support.

  Have an awesome rest of your day!

• How to detect if a TestStand execution has been terminated?

  We have written a GUI custom that has interface with TestStand to summon and control the execution of the sequence files.  In the course of a writ of execution, the operator can click a STOP button that causes run following code:

  this.myExecutionViewMgr.GetCommand (CommandKinds.CommandKind_Terminate). Execute (true);

  It works well, and TestStand is finished.  However, the event handler EndExecution tell me that execution has been terminated.  Here's what our code looks like:

  void EndExecutionEventHandler (sender As object, EndExecutionEvent ev)

  {

  This line ALWAYS returns SUCCESS or FAILURE

  This. Status = ev.exec.ResultStatus;

  The purpose of the error does not occur when I terminate

  PropertyObject errorObj = ev.exec.ErrorObject;

  If (errorObj.Exists ("occurred", 0) & errorObj.GetValBoolean ("occurred", 0))

  {

  error code string = errorObj.GetValNumber ("Error.Code", 0). ToString();

  string errorText = errorObj.GetValString ("Error.Msg", 0);

  MessageBox.Show (errorCode.ToString () + "-" + errorText);

  }

  }

  Is there a way to identify if a writ of execution has been cancelled, abandoned, etc.?

  You can also use Execution.GetStates and look at the State of cessation of employment to determine if it has been completed.

  -Doug

• How can I retrieve the execution of TestStand 4.0 Test results in a c sharp Application?

  I am writing a c sharp application to launch a test sequence in TestStand 4.0.1 and then collect the results of the tests to update our own screens / report (s).  I'll need some sort of recursive routine to collect the following information (if available) for each stage: name, result, Min value, Max Value, measured value, units.

  My attempts have been to an event to end execution allows to collect data:

  void EndExecution (sender As object, EndExecutionEvent ev)
  {
  Results PropertyObject = ev.exec.ResultObject.GetPropertyObject ("ResultList", 0);

  int numContainers = Results.GetNumElements ();

  for (int i = 0; i)< numcontainers;="">
  {
  PropertyObject resultData = results. GetPropertyObjectByOffset (i, 0);
  String testResult = resultData.GetValString ("Status", 0). ToString();

  PropertyObject testStep = resultData.GetPropertyObject ("TS", 0);
  Dim testName = testStep.GetValString ("StepName", 0). ToString();

  MessageBox.Show (i.ToString () + "". "") testName + "=" + testResult);
  }
  }

  But this only gives me MainSequence data.

  How to cross the ResultsList tree to access the results of all the test steps?

  tlaford,

  There are a couple of big problems with what you are doing:

  (1) it is best to call the code from a test report of the result of your sequence treatment reminder (just use an action step) or change the process template to call your code rather than to call for EndExecutionEventHandler of the user interface, because if you use Test DUT and then there is a separate resultlist by USE not by execution, and it is generally processed at the end of each use not at the end of execution. If you use the EndExecutionEventHandler then you should NOT use the process templates provided with TestStand because they don't work that way. Instead, you just run your sequences without a process template. Although I really recommend the path of process model, even if you write your own a custom, because it is more flexible, and then hardcode your treatment result in the user interface as you do. A few reasons why a process model is that more flexible or better are that it will work in any user interface, including the sequence editor (no changes to the user interface is needed), and it can do everything you can do in a sequence, for example to call a code module in any language supported , asynchronous sequences, call sous-séquences, etc.

  2 recursion) through each property at such a low level is bad because the names of the properties are not guaranteed to be unique for what you expect them to be. Anyone can write their own types step custom with some result properties that they would like. You must make sure that the full path to the properties is what you expect it, and you can even check that the type of step is one you expect. You should rather loop through the result of higher level items ONLY and are looking for the complete data lookupstrings that you expect from these elements. For example, instead of WalkTree you might have the following instead:

  This must be called from a step in a test recall report or in a custom process template
  rather than from EndExecutionEventHandler of the user interface, because if you use Test DUT then
  There is a separate resultlist by USE, not by execution, and it is usually processed
  at the end of each use not at the end of execution.
  Sub ProcessResultList (PropertyObject resultList)
  {
  	numElements int = resultList.GetNumElements ();
  	< numelements;="">
  	{
  		Element PropertyObject = resultList.GetPropertyObjectByOffset (i, 0);
  		String stepTypeName = string. Empty;
  If (point. There are ("TS. ((StepType', 0))
  			stepTypeName = GetValString ("TS. (StepType", 0);
  If (stepTypeName is "NumericLimitTest")
  		{
  			If (point. Exists ("Limits.High", 0))
  			{
  				 Double highLimit = item. GetValNumber ("Limits.High", 0);
  				 Do something with the value
  			}
  		}

  NOTE: The two step type SequenceCall and NI_Wait can have subresults like that. A stage of waiting waiting on an asynchronous thread or the execution will have this.
  If (point. There are ("TS. ((SequenceCall.ResultList', 0))
  {
  Recurse for results call sequence.
  PropertyObject sequenceCallResultList = item. GetPropertyObject ("TS. (SequenceCall.ResultList', 0);
  ProcessResultList (sequenceCallResultList);
  }
  }
  }

  Hope this helps to clear things up,

  -Doug

• Graph turns out to be empty.

  I have attached my vi. Waveform graph turns out to be empty, despite the fact that there are changes in my outings.
  Need help.

  Thank you.

  You seem to have an allergy to the straight lines! Those tortuous behind other objects work just as well, they make it much more difficult to determine what is happening.

  The structure of stacked sequence can be replaced with a control panel and a loop for. As crossrulz said, you need a delay between commands. Read the manual for your instrument.  You can use the error cluster to ensure the execution order, and it will let you know if you have errors. If the climb in canoe speed change while the program is running, this command must be out of the loop.

  Lynn

• TestStand value of a StationGlobal before execution of reconciliation

  I have trouble to determine why/how TestStand is one of my strings of StationGlobal to an empty string, returning at the start of execution. I have a default value defined before the sequence running and setting a breakpoint in the first step in the ModelSequence itself shows that the initial value has been erased.

  I am sure that there must be a setting or something I'm missing, although my other StationGlobals seem to have no problem maintaining their initial values.

  Can someone point me in the right direction?

  Hi anwanson08,

  Try to find the location of your sequence where the value has changed (Edit' find/replace with the name of the variable) in in your sequence. You can also use an edict"find/replace in files... (pretty brutal, yes).

  Maybe the value has been changed by the ProcessModel (is that you use customized?). Use the display of the watch on the string variable, with break option 'Change' (duty be defined at runtime, in order to keep your breakpoint, add your variable to the watch display and restart execution).

  If the change is made by the process model, it won't help to run the main sequence. So try to do a Run MainSequence (instead of Single Pass or TestUUT).

  I hope this helps...

• Module CVI written TestStand property, property value resets after the step execution.

  Hello

  I did a lot of research and find nothing relevant to the question that I have. I've created a DLL in CVI containing several functions I call TestStand. I also created a type of step customized for each function call. Every function in the DLL has a runtime version and a version edit-time. Time edition features each have a UI associated with them are called from teststand. Change these functions are placed in the custom under the heading "change" step step-type tab Before executing a sequence with these custom steps the edit-time user interface is launched to allow the user to input values that will be passed to the run function. originally, I tried to set up my functions as a 'post step' step in the step properties. However, the sequences would fail to run because the parameters of the step module was empty. Then, I selected CVI as the adapter in the step properties and specified a default module for each type. This filled the tab module settings step like I wanted. However, when I ran the sequence each function execution of measures was called twice, once for the stage of the post, and once for what was in the tab module I suppose. I then re-entered the types of step and deleted all the steps of the post office. I thought that all the problems have been resolved at this point, however, after doing some more extensive tests I always have a bug, I was unable to get rid of that.

  The problem is that two of my step types have to write data to current TestStand to execution after they ask an external device for IT. I know that the query works because my log text that generates the DLL displays the correct values. However, the data are not get rewritten on TestStand correctly. In the enforcement functions after checking the valid data has been returned, I try to write to TestStand using: "TS_PropertySetValNumber (seqContextCVI, NULL,"ThisContext.Step.ParameterValue.NumericParameter", 0, (double) ushortint);" »

  I checked that this call generates an error and also used the TS_PropertyExists method to check that I had the correct search string. These extract so I added then another command that reads the value written to TestStand two return immediately after to write it. I printed this in my log file and found that the value is written to the property of TS. So, the problem is that TestStand is defining the property to reset after the code module is running. How to prevent this?  

  Thanks for all comments, let me know if anything specified needs.

  Josh Meyer

  Well, I came to the conclusion that my 'problem' is not really a problem. I had a bit of a basic misunderstanding of the works of TestStand (I don't actually use it, I am writing just a code which will bring an existing one of the tools of the features inside the TS).

  in any case, what I learned is that these properties are retained (so you can set up a sequence, save it, re - open and be able to run it without any reconfiguration for example), when you write to a property when installing editting/sequence. The run time values are not preserved (if connected) because they are only required to carry out. For example, if a user calls one of these functions to extract value from a controller, they probably do so because they want to check the value, it's what they expect it to be. Rather than watching the value after execution (which is what I me assuming they would do), they would set up the step after step "read value" to test the value that it returned. This value is available in 'RunState.PreviousStep.valuename' in the downloaded step step "read value".

  Hope that I did not confuse anyone a lot, I'm completely new to TestStand.

• accident of execution TestStand 3.5

  Hello

  I have the following situation: I start a sequence using batch processing model in the sequence editor of Teststand 3.5 (with 6 sockets for example). MainSequence I start two new runs and then I wait until after the results.

  After a loop of the will of SeqEdit.exe sequence for a period of time (less than 10 minutes) crashes with the following message appears: "failed to create document empty."

  This behavior I have testicles on three systems, 2 systems of NOR and once on my Dell PC.

  My test sequence and a few screenshots after crash, you will find attached.

  I use Teststand 3.5 (3.5.0.725)

  I found a few work arround in order to avoid this error, but I don't know if this still works: to specify module-> settings I checked in this option: initially hidden and disable tracing. After that, my sequence was no longer crashes. I leave a loop over 30000 times at the weekend. My application must run for six months without ventilation 24/7, and the number of loops could reach 30,000 or more.

  Thank you for your support.

  danis_rom-

  I ran your example under TestStand 3.5 after I unchecked the option to hide and disable tracing on the sequence call steps and I noticed in the task manager that the GDI objects used by the process of the sequence editor TestStand grew in each iteration. I suspect that the 3.5 TestStand sequence editor had some leaks memory related to the creation of new windows running. This break-in an OI not probably will have the same problem. However, to continue to use the TestStand 3.5 sequence editor you will need to hold cache laid (easy) hidden executions, executions by socket and reuse/restart (hard), or you can call sequences using a thread in the current execution rather than use a separate performance (easy). If you moved to TestStand 4.0 or later, it is likely that these types of leaks memory have been corrected.