Existing models of precision EOL

Similar Questions

• How to remove existing models - because they replace DW files

  I can't understand how crreate a new BC site and delete all the files in the existing model.
  Some I can. Others Crash Dreamweaver files I am trying to download.

  to remove existing sites:

  -Connect to http://www.businesscatalyst.com

  -Chose the site to administer

  -Site-> Site management settings-> enter password-> works, if you switch to answer questions from survey-> Delete site.

• How to open an existing model

  I set up a model for my wife, who is not as familiar with the Pages that I am. The only way I found to open an existing to a new document model is looking for help with 'new' or 'model', and then I see "New model selector" as a menu item.

  Is it possible to add to the menu in option directly? I put in place to open new documents as a blank template. I know that I could change it to always open the model selector, but since I use the Pages most of the time, it's a step I would avoid if possible. I want to just add a 'open with the model' (or even better, open with the template that I put in place for it) as an option in the menu (or perhaps as a kind of shortcut).

  Hoping you can help.

  You cannot create your own menu entries in any version of the Pages. It is show model selector, or force a model via the usage model feature - both in the Pages of preferences.

  Configure a user for your wife account. Launch Pages of his account signed in and set it to one of the above parameters Pages preferences that would benefit him. These settings would be unique to his account.

• How can I import tables to a different schema in the relational model existing... to add these tables in the existing model? PLSS help

  How can I import tables from a different schema in the relational model... to add these tables in the existing relational/logic model? PLSS help

  Notes; I already have a schema ready relational/logic model... and I need to add more tables to this relational/logic model

  can I import the same way like I did before?

  But even if I do the same how can I add it in the template? as the logic model has been designed...

  Help, please...

  Thank you

  To view the diagram of logic model in Bachman notation, you right-click on a blank area of the diagram and select the rating > Bachman Notation.

  David

• Problem when saving an existing model

  Hello

  I have some difficulties to join an existing template that is stored on a data store.

  I arrived at the specific folder and try to create a new virtual machine from the model:

  > cd "vmstores:\vcenter200@80\Training\SharedTMPLs\Base".

  > $file = get-item "template.vmtx".

  > New - VM - VMHost (Get-VMHost esx207) - VMFilePath $file

  Here is the error I get every time:

  New - VM: 16/03/2010-14:43:07 New-VM DFE5C04C-1F92-4FE3-9F85-7A00F62C5A3E operation for the entity group-v

  22A failed with the following message: "path of the invalid data store ' vmstores:\vcenter200@80\Training\SharedTMPLs\Base\templa '.

  Te.vmtx'. »

  Online: 1 character: 7

  ++ New-VM < < < < - VMHost (Get-VMHost esx207) - VMFilePath $file +.

  + CategoryInfo: InvalidArgument: (Group - v22:String) , InvalidDatastoreException +.

  + FullyQualifiedErrorId: Client20_TaskServiceImpl_CheckServerSideTaskUpdates_OperationFailed, VMware.VimAutomation +.

  . Commands.NewVM

  And the message on the data store is "no data store path invalid"vmstores:\vcenter200@80\Training\SharedTMPLs\Base\template.vmtx".

  I tried with a real virtual machine, but it does not too...

  Someone at - it an idea?

  Thank you

  I don't think you can do this with a vmstores path.

  It must be a path to the data store

  $dsPath = "[Datastorename] Base/template.vmx"
  New-VM -VMHost (Get-VMHost esx207) -VMFilePath $dsPath
  

  The datastorename should be in brackets, followed by a space, followed by the folder and name of the file (separated by a slash).

  ____________

  Blog: LucD notes

  Twitter: lucd22

• lack of option"database of existing model - structure as well as data"

  Hi all
  
  I installed oracle 11.1.0.7 database enterprise edition (with ebs r12) and now a desire to create a model, including the data of the existing database files.
  However, the option "create a database template * of an existing database - structure as well as the data * is dimmed (not available).» do you have any ideea why?
  the environment variables are exported corectly.
  
  Thank you!

  If you have no entries in the file oratab for existing instances, this option will be grayed out.

  Rgds

• Read an existing model (12 c + with the option of triple oracle database)

  I've seen a few examples of code, all use the class 'oracle.spatial.rdf.client.jena.ModelOracleSem.createOracleSemModel (oracle, string);", which creates an RDF model, but I have already created using SQLplus and I want to do a simple READ. Is it possible to do?

  NB: my trip was this, I realized this tutorial (everything works fine), but now I want to reproduce CRUD queries on the model of the family (which is extracted from the Oracle documentation) using JAVA, the Jena API.

  Code:

  OracleThin. createOracleSemModel (oracleThin.getOracle (), modelName);

  }

  Hello

  I'm trying to understand your question. If you have four models and I assume that you want to run a SPARQL query against the union of the four models, right? If that's your goal, you can do something like:

  	String [] modelNames = new String() {"datebaseeva", "datebaselocalebackup", "datebaseMesuresMains"};
  	String [] rulebases = new String [] {};

  	Piece attached attachment = Attachment.createInstance (modelNames,
  	rulebases,
  	InferenceMaintenanceMode.NO_UPDATE,
  	QueryOptions.ALLOW_QUERY_INVALID_AND_DUP);

  //

  The following allows us to reach EVA, LOCALEBACKUP, MESURESMAINS for model of REGIONAL settings

  //

  Chart GraphOracleSem = new GraphOracleSem (oracle, "datebaselocale", room attached, true);

  Dim queryString As String =

  "PREFIX ORACLE_SEM_FS_NS: http://oracle.com/semtech#allow_dup=t>"+ ___PUT_YOUR_QUERY_HERE___; "

  ModelOracleSem m = new ModelOracleSem (graph);

  Query query = QueryFactory.create (queryString);

  Now, the following query will be executed on the 4 models.

  QueryExecution qe = QueryExecutionFactory.create (query, m);

  It will be useful,

  Zhe Wu

• How can I remove an existing model components?

  I have an old drawing is updated. Several items have been removed from the schematic in Multisim, and changes have been annotated with impatience to Ultiboard.

  The components were still available to Ultiboard PCB (all other programs I've used automatically deleted).

  I manually deleted the components in Ultiboard. Now the DRC Ultiboard is telling me that the components are not in the design. No joke!

  I see that these components are listed in the netlist in Ultiboard, even if they have been removed from the netlist in Multisim.

  Apparently, Multisim fails to transmit new information to netlist to Ultiboard with before annotation - what is quite poor, because it is the object of an annotation before transmitting the design changes!

  How send netlist update of Multisim with Ultiboard?

  PRH

  V11.0

  Hi PRH.

  The component should be removed, but try this:

  In Ultiboard, select Tools > Netlist Editor, click the Remove button, and then select all your nets and delete them. Components and traces should remain. Now try before annotation of Multisim.

  If this does not work, I like to look at your file.  If you can send me a private message with your email address and I will contact you.

• Ask Precision 490 model of motherboard.

  Hello.

  I want to replace two models of precision 490 same model and the restoration of the ghosting that the models.

  But I can't check the model of motherboard.

  So, I want to know about model precision 490 which have the same motherboard all 490 models?

  If you know some information, let me know that.

  Thank you.

  Hi Wonbin.Ko,

  Good day and welcome to the community!

  Thanks fr to reach out to us. Here is the list of the models of Board of Directors system and Description:

  • Part # DR054 - Service Kit motherboard for Clovertown processors only, G1, GNCK, PWS490 - SVC, PLN, GNCK, G1, PWS490
  • Part # TM199 - Service Kit motherboard for Dempsey processors only, link, GNCK, PWS490 - SVC, PLN, GNCK, LNK, PWS490
  • Part # TX883 - Kit of maintenance of motherboard for Woodcrest processors only, GNCK, PWS490, link - SVC, PLN, GNCK, B3, PWS490, V2

  I hope this helps. For what anyone else, just let me know and I am happy to help others.

  Thank you and best regards,

• Writing an Excel model without display

  Hi all..

  Please take a look at the attached VI. (LV7.1)

  I tried to open existing model n and write data in particular cells. I don't want Excel to open and show... he should write automatically.

  Hi Nghtcrwl,

  Add the 'visible' property to the first node of property a connect a true him. The first worksheet is index 1.

  Mike

• What is a good way to use the queues for the model of consumers/producers?

  Hi all

  I am following the model of consumers/producers to use the queue to synchronize the following process: the producer is a loop to produce a number N, I will put each number generated in a table and after each 5 numbers generated, I put the table in the queue and pass it on to the consumer. I have to wait the use by consumers of the data and it will then remove the item from queue so that producers will have the chance to produce another 5 numbers. As I put the maximum size of the queue one, I expect that the producer and the consumer turns to produce / consume all five numbers and the opportunity to another. Here is my code

  

  When the checkbox is false, the code will be

  

  For the first 5 numbers, product will generate every thing right and put it in the table, and it's going to pass the array to the quere so that the consumer will have the chance to loop through the table. I except the procude loop will continue only when the queue is available (i.e. all items are deleted), but it seems that once the consumer starts the loop loop of the product will continue (if the indicator x + 1 and x 2 will be changed to numbers). But this isn't what I want, I know there must be something wrong, but I can't say it is.

  dragondriver wrote:

  As you say in 1, sequency structure to enforce the order of execution, that's why I put it here, in this example, the simple question, I replace the complete code with increase in the number, in the real case, the first markers + 1 and + 2 must be performed in this order.

  Mikeporter says:
  1. get rid of all the structures of the sequence. None of them are nothing but apply a work order which would have been the same without them.

  So even if you delete the sequence structure, there will be a fixed & defined order and it is because LabVIEW follows the MODEL of FLOW OF DATA.

  Data flow model (more precisely in the context of LabVIEW): a block diagram node runs when it receives the required inputs. When a node is running, it produces output data and transmits data to the next node in the path of the data stream. The flow of data on the nodes determines the order of execution of the VIs and functions on the block diagram (click here for reference).

  Now in your code, just remove the sequence structure will not make you order will be going to stay the same, but you need to do some very minor changes (as thread of the error in loop, before that he go to the node "Élément Dequeue").

  Come to the main point: it's a good way to use the queue for the consumer/pmodel that?
  The model you are using (and qualifying as consumer/pmodel) is much too deviated from the original consumer/pmodel which model.

  dragondriver wrote:

  For the second, Yes, it's my fault for delete, though. I'm actually the example of model of producer/consumer design pattern, but I do not pay attention to the while loop in the part of the consumer.

  While loops (two producers & consumers) are the essential part of this architecture and cannot be deleted. You can start your code using standard model.

• Docking station for Dell Precision 7510

  I have Dell communities very recently joined after I buy the laptop Dell Precision 7510. It's a great product so far, but I want something better. I want more ports. A cradle to go with it is the obvious solution.
  

  What is the best laptop computer Dell Precision 7510-compatible docking station? My specific needs/setup:
  

  -2 external screens (D - sub / HDMI, or for £50 in addition, connection I get display-port), screens may be more in the future
  

  -internet cable high speed
  

  headphone/microphone
  

  -Sockets USB for mouse, keyboard, printer, scanner, external hard drives, etc.
  

  I presume that the Advanced E-port replicator is the best/most appropriate. I just want to be sure of that, because my laptop model (7510 precision) is still very new and not all information everywhere put on compatibility. I don't want to make a costly mistake. I travel and will not be able to "return" the products I buy.
  

  Yes. I contacted Dell sales... service and they told me that the Dell E-Port Plus II is compatible with my 7510 accuracy. After written confirmation, I advanced and bought a British supplier on Amazon for £100... but he came in a suspicious package and did not work well, and the adapter was the size of a brick (literally). I went back to Amazon... and tried my luck with Amazon Germany. You can get the original product on their part for about 140 euros, and it works perfectly. The link to the product:

  http://www.Amazon.co.UK/GP/product/B00A8ESOVA?PSC=1&redirect=true&ref_=od_aui_detailpages00

  (it's actually UK, now that I check it... it's that I bought and it's good)

  Basically, Dell has not updated its compatibility information yet. The docking station is listed in the check-out for precision 7510, but does not say specifically that it is compatible with this model. I had similar problems elsewhere too, as I want to install LoJack on my laptop, but can not find information about the question to know if my laptop model is supported by what is called the 'persistence technology' in the BIOS (which makes it impossible to uninstall LoJack even if you change hard drives).

• Addition of a VLSM subnet to an existing design

  Hello!

  I'm studying for my CCENT exam and practical this question in the book warning stumble me.  I'm starting to think that it's a typo.

  The problem relates to the addition of a subnet to an existing model.  The current design already has these five subnets:

  10.0.0.0/24

  10.0.1.0/25

  10.0.2.0/26

  10.0.3.0/27

  10.0.6.0/28

  The boss can't decide among five competitors subnet masks to be used for this new next subnet to add to the internetwork.  However, the boss wants you to practice VLSM and plan ID subnet he would use for each of these four possible masks.  It tells you that the new subnet ID should be part of the 10.0.0.0 network, class A, which the new subnet should not overlap with the original five subnets, and the new subnet ID must be the ID of possible subnet numerically lowest (without breaking other rules).  Choose a subnet ID that you can plan to use based on the following mask.

  / 22

  The answer guide says it's 10.0.8.0/22 as the new numerically lower number of subnet that does not overlap with the existing subnets.  However; It's confusing to me because it seems that the correct answer must be 10.0.4.0/22, because it does not overlap with any of the existing subnets and is a subnet of lower than 10.0.8.0/22.

  Let me know if you need more information on this.  Thanks to you all!

  10.0.4.0/22 includes:

  • 10.0.4.0/24
  • 10.0.5.0/24
  • 10.0.6.0/24
  • 10.0.7.0/24

  Who rides with 10.0.6.0/28.

• Addition of VLAN model vNIC gives recoverable warning on no uplink with all the VLANS

  We try to add a new VLAN to an existing model vNIC. When I select the check box for the VLAN under Edit VLAN, I get:

  Your changes:

  Create: [new VLAN]

  Will result in a warning of non-fatal configuration for:

  Service profile [ProfileName]

  Reason: Could not find any operational uplink port that carries all the VLAN of the vNIC (s). VNIC (s) will be closed down, which lead us to disruptions of traffic on all the VLANS existing on the vNIC (s).

  We have currently VLAN assigned to the model, of which some are carried by a channel of port on our switch of production, the rest are carried by an Ethernet interface for our perimeter switch.

  This error occurs because no interface/PC carries all the VLAN assigned on its own?

  Am I missing something?

  Thank you for any assistance.

  Joe

  Hello

  Even if you have a port channel and a separate uplink Ethernet carrying all them VLAN which required servers, your vnic will only be pinned to the port-channel or the uplink Ethernet never at the same time, so if your vnic is currently pinned on the port-channel and the new VLAN is assigned to the Ethernet interface you may be seeing this error message. To resolve this problem, you must ensure that the uplink your vnic is pinned puts implement all the VLANS that you want.  See doc below

  Separate layer 2

  http://www.Cisco.com/c/en/us/solutions/collateral/data-center-virtualiza...

• Horizontal scroll bar in the model of interactive report region 5 Apex (universal theme)

  Hello

  We have migrated our application from 4.2 (theme: 21 scarlet) to 5.0 (changed to universal theme). Most of our reports are interactive reports and have more than 20 columns to display in the reports. 4.2 in the 'Region of report"model horizontal scroll bar came from bottom of page like below and has been easy for the user to scroll through the options to the right and see all the columns.

  

  In the universal theme apex 5 with 'interactive report' model in order to see the columns on the far right in the first lines user must scroll the vertical bar first, then scroll horizontal straight bar and vertical bar to go to the top

  
  

  

  
  

  How can you have the scroll as in 4.2 bar region of report model. I think that we need to make some changes in CSS and also need to copy the existing model and make changes and use this model in all reports.

  
  

  Thank you.

  RAM
  

  
  

  Hi Tim,.

  Thanks for the reply. I tried this option before posting forum. It did not work. Now, after changing position attribute fixed to the ' Page "(or region) in the report attributes section it works." " When we migrated the app at UT, he has been on 'None '. Problem solved now. Thank you.