DeskJet 6122: Deskjet 6122 Error Messages

Similar Questions

• DESKJET 3052 error message has 'computer not found '.

  hooked wireless, Windows 8, error message "not found computer" when scanning, is gone in circles with print & scan doctor

  Try connecting the printer to the computer with USB.

  Then, try to scan. Let me know the results.

• HP Deskjet 3520: Error Message at startup

  I now have a 3520 printer that I have had for 2 years. Previously, I had a model 5510 and uninstalled all programs to change information.

  In the last 2 months, I get this message at startup upward.  Run the specific DLL module is not found.  C:\Programsfiles\HP\HPPhotosmart 5510d sries\bin\HPstatus BL.dii.

  I am able to click and lose, but I don't know that it slows down the startup

  Any suggestions please

  The Board of directors who best matches is Desk top. Drop-down menu would not allow this selection. Laptop is incorrect

  I followed your instructions but it made no difference.

  I went back to the list and not the 3 elements that says no 'found', and this has solved the problem.

  I do not how to send you a link to see

  Thank you very much

• HP Deskjet 2544: HP Deskjet 2540 Series not found - Error Message

  Hello

  I'm getting "HP Deskjet 2540 Series not found" - Error Message When I tried to scan...

  I have recently upgraded to windows 10. I get the same error message when I trobleshoot using 'doctor print and Scan '.

  Please fo help me solve this problem...

  Thank you...

  Hey @HpUser83,

  Welcome to the Forums of HP Support!

  I would like to help you today to resolve the 'HP Deskjet 2540 Series not found' scan error you get when the all-in-one printer HP Deskjet 2544 scanning to your computer Windows 10. There is probably a software or driver error occurring. Can I please you follow the steps below to resolve this error.

  If you use a USB cable between the printer and the computer connection, please unplug this cable now.

  Step 1: Remove the driver:

  1. click on the Start button

  

  2. type programs and features. If a search does not start automatically, you will need to type programs and features in the area of "Ask Me anything".

  3. click on programs and features to launch the window.

  4. in programs and features, will populate a list of the programs installed on your computer. Please scroll down and look for your HP Deskjet. If you see your HP Deskjet in the list, click it and choose Uninstall.

  5 follow the prompts on the screen to complete the uninstallation. Once the uninstall is complete successfully please close programs and features.

  6. then, click on the menu start of new

  7. this time type devices

  8 click on devices and printers to launch the window.

  

  9. in devices and printers are looking for your HP Deskjet. If you see if if please right click above and choose 'Remove' or 'Remove'.

  10. Once your HP Deskjet printer is more than showing in devices and printers please click on any device in the list of Printers once just to highlight. Click the print server properties on top

  

  11. click on the drivers tab

  12. look for your HP Deskjet printer driver. If the list, please click it and choose delete

  13. Select delete the driver only

  14. Select OK

  15 click apply and OK in the print server properties window.

  16. close devices and printers. Please proceed to the next step.

  Step 2: Remove temporary files:

  1. click on the Start menu

  2. type run. Click on Run to launch the run dialogue box.

  

  3. tap folder in the run box, and then click OK

  

  4. when the Temp folder, open select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.

  5. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.

  6. close the Temp folder when it is empty

  7. right-click the recycling bin on your desktop and select empty recycling bin. Please proceed to the next step.

  Step 3: Install the device:

  1. Please click here to download and install the package to the full functionality of the software and the driver for your printer
  2. Once the download is complete, follow the prompts on the screen to install your printer
  3. If you use a USB cable connection, do not connect the USB cable until the installation program invites you to

  Once the installation is completed successfully, please test scan.

  Please reply to this message with the result of your troubleshooting. I look forward to hear from you!

• HP Deskjet 3050 a J611 series. I have used this printer before with the same laptop. Error message #5

  I have a HP Deskjet 3050 a J611 all-in-one. I have used this printer with the same laptop that were purchased together.

  He was works fine, but now when I try the CD to install, an error message comes up with cannot load drivers or cannot find the port to monitor? I tried everything to implement without change.

  Have you tried to download the drivers from the Web site. Here is a link that will help you with it. http://goo.GL/BVOOg

• receive an error message that the cover is open, but it is not, on my deskjet 6980. How can I fix it?

  I have a HP Deskjet 6980.  I recently changed the ink cartridge, but since then have not been able to print. I get an error message indicating that "cover is open", but it is not.  How can I fix?

  Hi Cathy,.

  Please follow the t\s mentioned in the following document.

  http://support.HP.com/us-en/document/c01065334

  Thank you

• Printing from MAC for Deskjet 3050 ALL in one J611n - printer "Not connected" error message

  Good afternoon

  I have problems printing my MAC Book Pro to the printer above.  I said that it is not connected and prints However, when I checked status it shws Networkas "Ready" and the connection as "active"? He doesn't seem to know if it is or isn't?

  I had this problem before on occasions, but now it is a permanent one after upgrading my operating system to 'Maverick '. Now, I have what you call love at first sight bridge on my MAC and don't know what it is for! This has something to do with it? Love at first sight does not appear connected either?

  It's a real pain and I think to get rid of my printer without wire-HELP!

  In addition to the above, I noticed the following error message when I try to print:

  Device status: unknown

  I.D. service: unknown

  I.W Version: unknown

  Serial number: unknown

  Driver version: 2.3.1 HP inkjet driver (why this displays when it's a Deskjet 3050 J611n?)

  Product number: unknown

  I.K no 658

  Watch the device Staus and office as "Unknown".

  3rd update me! In the HP utility is see two printers?  The other has all the full details above with serial numbers and all the info. Watch Staus 'idle' and our 'good '.

  Tracy

  I see that I had 20 veiws and no answer!

  I am new to Mac and not very techno, however I seem to have solved this problem myself.

  I think that after turning to 'Maverick' on my Mac OS Lion, duplicate the printer as 2 showed in 'utility '.

  "I basically deleted that was not'online ' or 'connected '.

  Problem solved!

  Tracy UK

  TracyUK wrote:

  Good afternoon

  I have problems printing my MAC Book Pro to the printer above.  I said that it is not connected and prints However, when I checked status it shws Networkas "Ready" and the connection as "active"? He doesn't seem to know if it is or isn't?

  I had this problem before on occasions, but now it is a permanent one after upgrading my operating system to 'Maverick '. Now, I have what you call love at first sight bridge on my MAC and don't know what it is for! This has something to do with it? Love at first sight does not appear connected either?

  It's a real pain and I think to get rid of my printer without wire-HELP!

  In addition to the above, I noticed the following error message when I try to print:

  Device status: unknown

  I.D. service: unknown

  I.W Version: unknown

  Serial number: unknown

  Driver version: 2.3.1 HP inkjet driver (why this displays when it's a Deskjet 3050 J611n?)

  Product number: unknown

  I.K no 658

  Watch the device Staus and office as "Unknown".

  3rd update me! In the HP utility is see two printers?  The other has all the full details above with serial numbers and all the info. Watch Staus 'idle' and our 'good '.

  Tracy

• DeskJet 3520: 0xB3F1A01C Error Message When you open the printer

  I add the 0x83C00009 error message. But I was able to remove the cartridge and now it has changed to 0xB3F1A01C

  A google search gives no results.

  The power supply for flash button. The inside of the printer will move anything, it's dead.

  What does this error means?

  Hi @Zurd,

  Thank you for visiting the Forums from the HP Support! I understand that you get an error message on your HP Deskjet 3520.

  I would like you to start troubleshooting here: "Problem with print head", "printer failure,' 'Ink system failure', or"0 x."r"C2. "... "Error m...

  «Because there are many variations of these "problem with print head", "Printer failure," or error messages 'Ink system failure' and alphanumeric codes, we have provided guided a few steps to help you troubleshooting document for your mistake right.» Select the statement that best fits your situation. »

  I hope this helps, if you still get the error message, please contact our technical support at www.hp.com/contacthp/. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

• DeskJet 3520 prints OK, but gives the wrong error message.

  Yesterday, I installed a brand new 3520 Deskjet on an existing Windows XP PC.

  The printer prints the now very well two documents and test pages, it also copies OK.

  But, every time it prints a page, Windows launched a misleading message that the printer is not connected.

  There was a bit of a problem installing. When I came to the PC of someone else had tried to install it and the PC thought that the printer is connected to LPT1, a non-existent port port, is why it wouldn't print-out. I ran the installation CD, select USB connection and ended up with two 3520 s in "Printers and faxes" a LPT1 and USB, so I deleted the connected device LPT1 and renamed USB because he had one (1) is appended to the name. Maybe a part of still think Windows there are two 3520 s identical to which it can send print files, one that works and one that doesn't even have a port.

  Any ideas how I can fix this error message / delete the ghost printer if that's what it is?

  (1) open printers & faxes
  (2) temporarily thing set as default printer
  (3) remove 3250 and unplug the USB cable
  (4) restart Windows
  (5) Reconnect USB cable - Windows will recognize the new hardware and set it up automatically. No need for drivers or CD, it keeps that information.
  (6) back to the printers & faxes to ensure that 3250 is display and make sure he again default printer.
  (7) test prints - OK - job done.

• my printer sends error messages - Deskjet F 4185

  part way through a print job I received the error message "transport cradle cannot move...» "and spat on several blank pages. I followed the recommended procedure to put off the printer, but the error message "transport stall" appeared.

  printer Deskjet F 4185

  10.7 Mac OS

  Thank you

  LeighWillaston

  Hi Leigh,

  Thanks for the post.  On this one, I could recommend that you follow the steps on this link.  Good luck!

  http://support.HP.com/us-en/document/c00967015

• HP DESKJET INK ADVANATAGE 3545: error message in my hp deskjet ink advantage 3545 ERROR CODE 0X83C0000A NOS_LOADER_APP

  Hello

  HOW TO GET THE SOLUTION FOR THE ERROR ON MY HP DESKJET 3545 ERROR CODE 0X83C0000A NOS_LOADER_APP

  Hello

  Please try the steps below...

  1. While the printer is on, remove the cartridges.
  2. Remove all sheets in the tray. Close the drawer.
  3. While the printer turned on, unplug the power cord from the back of the printer.
  4. Power Off the Wireless router.
  5. Wait 60 seconds.
  6. Plug the power cord of the printer.
  7. When you are prompted, install the cartridges.
  8. If the error persists, then it is a printer failure. Please call HP Tech Support for assistance.

  Support of HP technology (USA) 1-800-474-6836

• DeskJet f4180: always E error message and empty cartridge light flashing after installing new cartridge

  I always get the error message E and empty flashing cartridge light after installing new black cartridge.

  Welcome to the @vinylzappaforum!

  I read on the 'E' and the empty cartridge light blinks after I installed a new black ink cartridge. If you have tried the guides that I suggested in our other thread here, so the next step would be to call phone support at HP to discuss your printer options coming with them. I let the info below.

  Please click the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

  Contact HP:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• HP Deskjet F2420: HP F2420 Scan Error Message - can not sweep

  I may have Windows 32 or 64... I do not know..   However, I can't see the scanner command works. I have reinstalled the problem mentioned Adobe Flash, checked that all the drivers are correct and up to date... unplugged and all the usual stuff but still get the error message as follows: -.

  the scanning software was launched with improper command-line arguments

  8 (-1,0,0) or something to that effect.

  Tried everything and does not work via the buttons HP solution center command promt.

  I need help to get my documents transmitted via PDF format as soon as possible.

  Please can someone help me?

  Thks

  Tony

  Hello

  Thank you for using the forum.  You can try the following:

  Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PDU

  Also, you can try to use HP Scana nd Capture since the HP AiO remote applications:

  HP AiO Remote apps

  Follow these steps to get the applications (if it is not already installed):

  1. Go to the Windows store
  2. Search for "HP AiO Remote" apps
  3. Install the apps.
  4. Apps should detect your wireless printer, depending on the applications, there is a function "Scan."
  5. Click the Scan and it will direct allows you to download apps "Scan and capture.
  6. After installation, you should be able to scan.

  Hope that helps.

• HP Deskjet D4160: HP D4160 - '' filter' impossible' error message

  I got my printer unplugged for a few days.  After plugging back in, I can't print - I get this error message: ' filter ' ' failed.  The test print works.  The printer appears in printers/scanners.  What should I do?

  I found the solution... remove you the printer in the printer list and find him.  It works!  Thanks to the previous poster.

• DeskJet 5610: 5610 Deskjet driver came out prematurelly without error message

  I was running aio_cdb_nonnet_full_win_ww_130_141.exe downloaded from the HP web site.

  But at half way through the installation itself abandoned without error message.

  He came out after I clicked on accept and continue.

  Hello

  Follow the installation once more until you reach the EULA screen, then click on the 2nd link (the use of Internet connection settings).

  Select No, thank you for all the options and confirm the license agreement.

  The additional installation and check for the difference.

  Shlomi