expdp include the queue?

Similar Questions

• VISA resources between the loops with the queue

  Hi all

  I am just be familiar with the queues and the producer/consumer model, and I am facing difficulties to pass data between the loops using queues, including data of the type "VISA Resource Name.

  Indeed, it seems impossible to cable "VISA Resource Name" as an entry of the item in the queue, as an output of the Dequeue item.

  These screws can I always try to convert something of this type can accept? Or should I take a different approach and that one?

  Thank you very much for your help.

  Florian

  
  

• Error to the element of the queue with simulated signal, but not with the DAQ hardware

  Hello.  I get an error code 1 when I run my VI in simulation mode, which is only 3 simulate subvis signal at different frequencies.  The block diagram shows jpg file and the probe is after I stop the VI.  Note that there is an invalid refnum.  I don't know why that is.  I am also including the watch of the probe after a few iterations, there is no error on the probe 64 until I stop the VI, and also noted that there have been no queue items.  This of course means that I don't get to remove the data in loop 2.  An interesting note is that the system works fine when I run the program in data acquisition mode, which is the other case behind the 'simulate signals. "  In this case, the only thing is the DAQ assistant and dynamic data of the tunnel cable.  Everyone can't see what I could do wrong?  Thank you.

  Thanks for looking at my post.  I thought about it about five minutes ago.  I didn't have a timeout on the handeler event, so it was not double check for new items in the queue.  I don't know yet why the probe shows showes that items have not put in the queue because they certainly were.  Maybe "queue items 0" means that there are no items saved in the queue. ?

  Your concern is interesting and deserves a check...  I just ran it without registration, and it seems that the release of the case (the default) record structure is just an empty DDT, a placeholder, I guess.

• HP officejet pro 8600: printer will not be used with the document in the queue

  Hi people,

  can someone help me please?

  I tried all the solutions proposed-

  Check connectivity

  restarted print queue

  Remove and then reconnect the printer

  Power reset

  Cancel job again.

  I had this problem before, but something so tinkering with the queue got fine but nothing works all the time.

  I just changed the cartridges...

  No matter what other dieas welcome please

  Ashoka

  Ash,

  I could be wrong, of course; Mac is not liable for the same way as the Windows environment.

  The printer can print when the print queue of the printer is on, ready to accept a job.  If the queue of work, i.e. the service on the printer running print jobs does not print to the printer, the printer will not print the work.

  If the printer on the computer service is not to blame, then you might indeed want to accuse the printer to not receive the work.

  You can check the communication between the printer and the rest of the installation between the printer and the service that sends the work to the printer:

  You could try to put everything back once more - to include your router.

  I hope this helps.

  Maybe someone with a Mac experience can shed light on the issue.

  Click on the Thumbs - Up Kudos to show that you appreciate the help.

  I am happy to provide assistance on behalf of HP. I do not work for HP.

  Click on accept as Solution when the answer provides a fix or a workaround!

• How can move items in the queue of 1 printer to another

  the title is the question... There are 2 printers put in place, just one, the disposable items in the queue and I want to move them.

  Jobs that are already in the queue are files that were produced by the printer driver and therefore include the printer controls that are specific to this printer.  Directing to the queue print on a second printer will only work if the second printer can correctly interpret the commands to the printer to be the first printer.

  If the second printer is of the same type as the first, the simplest method is to temporarily redirect the port assigned to the second printer.

  1. Go to printers and faxes
  2. Right-click on the icon for the 'good' printer and select Properties, then click the Ports tab
  3. Scroll the list of ports and make a note of the port to which the 'good' printer is made (one with a check) click on Cancel to close the Properties dialog box
  4. Right-click on the "disposable" printer icon, select Properties, and then click the Ports tab
  5. Make a note of the port which is checked, uncheck it and check the port that you noted in step 3.
  6. Click OK

  If the printers are not identical models, but at least the same type (laser, inkjet, matrix), it can work.  The closest to the printers are, it is likely that the print job prints correctly.

• The queue from table question

  I had a recent application where I wanted to take 100 samples of something then get the RMS of the dara. This is happening in a loop, and until the end of the program. Very basic stuff.

  • Method of the QUEUE:
  • Get queues with max 100 items.
  • Queue data (data arrive on every 50mS).
  • Get the status of the queue when the number of items is 100...
  • ... Empty the queue and get all the items (which of course will be a prison guard) and use the RMS funtion.
  • Repeat

  ---------------------

  • TABLE method:
  • Initialize the array with 100 elements of the DBL 9999.99 (it is a value that can only happen in the data)
  • Insert data in the table to help replace a subset of table
  • When 100 index isn't 9999.99, then...
  • ... Put the table in the RMS function, then re - initialize the full array of the 9999.99
  • Repeat

  My questions are, who should be faster, including better management of memory?

  Thank you!

  Why not just use the RMS PtByPt VI. In this way, you don't need to store data at all? This may require that marginally more calculation, but will require less memory.

  If you insist on the pad, I'd probably go with the table for simplicity. I think you can simplify your system to determine when to treat well. No reason to have all these 9999.99 is here.

  Chris

• HP2710 print jobs stuck in the queue even if test page prints

  I have a HP Photosmart 2710 all-in-one printer attached via the USB port of a laptop ASUS G73Jw running under Windows 7 64-bit. The printer worked fine with a Toshiba laptop running Windows XP 32-bit only. But now cling all the documents in the queue if thay are Word, pdf or Notepad. I tried everything I could find on the HP forums. I downloaded the last software update. I ran the diagnostics HPPDU utility. After that I ran this utility test page prints fine, but nothing else gets stuck in the queue. I obeyed different instructions to disconnect and reconnect the printer, do a reboot etc after running the diagnostic utility. I tried other 'solutions' various users have suggested, including disabling bidirectional printing, restarting the spooler service and directly without the print spooler. Nothing works.

  Given that I can print a test page I doubt that it is a mechanical problem. I suspect some sort of driver incompatibility. Because I downloaded the driver more once in frustration I think there could be pieces of drivers still present, although I can't view them with the uninstall command or the Device Manager. In fact, I can't find any file with any HP device software. Maybe it's because the driver is downloaded directly from Windows 7 when you do a Plug-and-Play.

  There are a large number of driver files under everything in the printer properties. But I don't know which driver files should be there.

  I'm about to trash this printer unless someone has an idea what to do.

  Help!

  It could cause a conflict if the printer is stuck which occupies the port because it could block all communication with anything that is not this printer.  It may be something wrong with the way that ASUS manages virtual USB drivers, but I have not heard anything.  You might try to give them a call if you're really curious, just to see if they know anything.

• Printer does not print after canceling a print job even if I deleted the queue and stop the printer and the computer.

  Re Vista - printer does not print after canceling a print job even if I deleted the queue and stop the computer and the printer and restarted.

  Hello

  ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Completed tasks remain in the queue, subsequent job does not print.

  Queue says 100%, but it never goes away.  If I put the computer to sleep, it prints a second copy of the work "completed" (even if only one has been specified.  If I have a second job in the queue, it does not print until I have manually delete one (a troublesome task with several jobs to print).

  I tried a few suggestions that I found these boards of Directors, including the removal and re-adding the printer, printing (Option-click) system reset, unplug the power cord and plug and unplug the USB cable and reconnect.  None of these things has eliminated the problem.

  I can impose by the experts here to suggest something that I might have missed?

  Photosmart Premium C310

  Driver version 4.1.2

  Mac OS 10.9.4

  I recommend you only uninstall the HP software using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Press on and press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall, it IS the Option of the scrubber, no button is labeled "washer".
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Download and install this: http://support.apple.com/kb/DL907

  Restart your Mac.

  Now reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• Printing for Vista Home Premium 32-bit network: Blank document or disappears from the queue

  I'm having trouble printing large format HP DeskJet 1000 c, which is connected via a parallel cable to my Media Center/DVR PC running Windows Vista Home Premium 32 - bit SP2 on my printer. I connected with the success of this printer to two different computers, a desktop PC running Windows Vista Home Premium 64 - bit SP2 and a laptop Mac OS x 10.5.8. I can print from the local computer very well, but when I try and use the printer on the network, one of two things happens depending on what machine I try and print from:

  1. from Vista 64 Desktop: printing the task appears, treats and disappears from the queue to the local printing on PC DVR. Printer advance a sheet of paper as if he were about to print, then waits with a power indicator light flashes. If you send a new job network, the tip sheet of paper is ejected and the process begins again. If you send a new job locally, the tip sheet of paper is ejected and the local job will print normally.

  2. from Mac OS x: printing the task appears, treats and disappears from the queue to the local printing on PC DVR. Printer does nothing.

  Although the process of networking of printers with OS X 10.5 and Vista is a bit more complicated (annoying) it was with XP, I am able to print from the Mac to a printer on the Vista 64 machine very well. Similarly, PC DVR allows you to print to the printer of the Vista 64 computer and a printer connected to my Mac desktop.

  I checked the HP site for drivers and since it is a quite old printer, there is no listed for any operating system newer than Windows 2000 (which a pilot has been included with the operating system). Any ideas as to why the PC DVR will not take of the network print jobs? Unfortunately, this complex printer (3 printers, 4 machines) installation is somewhat needed due to the possibilities of each printer and how my home office is laid out. If they did a multifunction, printer laser color large network format, I could sell my soul for what it... But I'm not aware of such a machine available to mortals.

  There is a difficulty that recently came on the HP Forums for 64-bit Vista:

  http://h30434.www3.HP.com/T5/printer-all-in-one-software-and/DeskJet-710-720-810-820-100-series-printers-patch-for-64-bit/m-p/203377#U203377

  All you have to is to download the mentioned file and replace some dll with those provided.

  The question remains with OS X, but I do not expect that Microsoft will provide no support for this.

• HP Photosmart 7760 printer will not print, the error message in the queue

  I have Mac 10.6.8.   Printer (HP Photosmart 7760) has stopped working.  Reinstalled the drivers updated. Went through the steps including unplugging cables USB and all the other steps recommended by HP. When I press print, the document goes to the queue and and the error message is displayed. When I press the resume to print, nothing happens.

  We will restore the print system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• When I do Ctrl 'P' there is nothing in the queue

  When I try to print, I think that's not queue. The printer says that there is nothing in the queue?

  Hi Jennifer,.

  1. What is the brand and model of the printer?

  2. you make changes to the computer before this problem?

  Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  We can refer to this article and check if that helps.

  Why can I not print? : http://windows.microsoft.com/en-us/windows7/why-cant-i-print

  This tutorial is designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

  Solve printer problems: http://windows.microsoft.com/en-us/windows/printer-problems-in-windows-help#fix-printer-problems=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Response with the State of the question and we will be happy to offer you our help.

• Evacuation of the queues on Cisco 6504-E and 6509-E Cisco line cards

  Hello

  In our network environment, we get the following configuration:

  Cisco 6509-E(Sup-2T) as the main switch equipped of line card module WS-X 6848-SFP (1 GE)

  Cisco 6504-E (VSS-720-10 G Sup) as long as the service of distribution layer switch equipped WS-X 6704-10GE line card module

  .

  Time modules line cards end Layer 3 connections from the layer of access/core.

  The QoS trust status is ""DSCP ' on line card interfaces and 6504-E 'mls qos trust dscp' is explicitly configured to trust the DSCP values. "           As is clear from interface capacity output below, "QoS queueuing" mode on both cards line is "CoS" only, and DSCP evacuation lines is not available in interface ' wrr-tail ' configurations. Similar problem exists on the interfaces of channel member of port on the main switch Sup - 2 t as well.

  CORE01 #sh int gig2/1 cap

  GigabitEthernet2/1

  Model: WS - X SFP-6848

  Type: 1000BaseSX

  QOS scheduling: rx-(2q8t), tx-(1p3q8t)

  Queueing QOS mode: rx-(cos), tx-(cos)

  VSS01 #sh int t1/2/1 cap

  TenGigabitEthernet1/2/1

  Model: WS - X 6704-10GE

  Type: 10Gbase-LR

  QOS scheduling: rx-(8q8t), tx-(1p7q8t)

  Queueing QOS mode: rx-(cos), tx-(cos)

  CORE01(Config-if) #wrr - queue?

  minimum bandwidth of WRR bandwidth set with weights or percentages

  cos-map set up cos-sheet for a queue threshold ---> Cos map only no. DSCP

  the queue limit configure the queue limit

  detection of random set up the random detection

  the bandwidth of the SRR maximum queue set up with weights of form or

  percentages

  tail-drop threshold thresholds configure queue

  VSS01(Config-if) #wrr - queue?

  minimum bandwidth of WRR bandwidth set with weights or percentages

  COS-map set up cos-sheet for a queue threshold---> Cos only no. DSCP map

  the queue limit configure the queue limit

  detection of random set up the random detection

  tail-drop threshold thresholds configure queue

  In the above scenario, how the evacuation of the queues should be applied and what are best practices? If 'wrr-tail' is not supported for DSCP, it's recommended to set up "Political map" for evacuation queues and/or any other configuration of queues and then apply the policy of the outgoing evacuation on the interface function. Also, if the queue of political output card config is used, this allows for all the other DSCP / COS line cards in the system, so that the configuration is compatible with the network of 6500.

  Thank you and best regards,

  Mohan

  :

  Disclaimer

  The author of this announcement offers the information in this publication without compensation and with the understanding of the reader that there is no implicit or explicit adequacy or adaptation to any purpose.  Information provided is for information purposes only and should not be interpreted as making the professional advice of any kind. Use information from this announcement is only at risk of the reader.

  RESPONSIBILITY

  Any author will be responsible for any damage that it (including, without limitation, damages for loss of use, data or profits) arising out of the use or inability to use the information in the view even if author has been advised of the possibility of such damages.

  Poster

  My understanding is that you use wrr-queue cos-card as you would be for the CoS values understand the DSCP values have been mapped in these CoS values.

  If you look at figure 2-25, in the reference I provided, you will see 'Final internal DSCP is mapped to CoS' and ' "DSCP-CoS > rewrite" when dealing with exit port QoS. "

• Load balancing between the queues of Tuxedo

  Hello

  I have the following situation where my tuxedo is running on two machines, and on each one, I have a queuespace and a specific queue called TQ1. My question is: if I turn the LDBAL configuration and, on my Services section of the ubbconfig, I put two TQ1 entries, one for each group, Tuxedo perform balancing between the two groups/queuespaces the same as it would with a normal service?

  I have this doubt because on the tpenqueue method call, one of the parameters is the name of queuespace. Seeing that my queuespaces have different names, including that of the queuespaces which was to inform? Or should I rename the two Queuespaces to the same name?

  Also, on the dequeue Tuxedo could as the two queuespace to make the dequeue?

  Thanks in advance,

  brunno Attorre

  Hi Brunno,

  TMQUEUE announces a service which is the name of the queuespace, not the default queue.  Thus, when tpenqueue() and tpdequeue() do their work, they apply to a service with the name of the queuespace.  As the tuxedo does not know that these service names are associated with the queue space, it will load applications of balance to several TMQUEUE servers that advertise the same name of queuespace.  In fact, for scalability purposes, you can configure several servers TMQUEUE running on the same queuespace if they are on the same machine that they will share the shared memory section associated with the queuespace.  If this is done on different machines, the queuespaces must be different, even if they have the same name.  Access to specific queues will be undefined, which means that if you msg enqueue and then try to specifically dequeue msg has, you might get an error because msg has maybe gone to a queuespace, and dequeue request went to the other.

  We are working on improvements to the queue Message of Tuxedo (an offering message improved to Tuxedo queues) to make something like this work in a more transparent manner, i.e. the dequeue to msg that one would work regardless of machine/TMQUEUE server process requests.

  Kind regards

  Todd little

  Chief Architect of Oracle Tuxedo

• Submit to the queue build - DPS App Builder v27

  I am wanting to update our current application to v27. I downloaded the new tools, including the new Builder App DPS to our DPS. (run CS6 - Pro account)

  I went through the steps of the 'edition' our existing application in App Builder and now met the window "pop-up window will disappear once completed. This process never ends. I waited over 45 minutes for the construction at present and the pop-up window to disappear. No luck. I leave App Builder to stop force.

  I have deleated App Builder and re-uploaded and have gone through the same process and always get the window closing ever 'submit to the build queue'.

  If I raise App Builder, I see in the column Details App that our application has been changed through the 'last modified date', but can I trust that he has changed that I can never get the button 'Finish' using App Builder.

  Thanks in advance.

  Tom

  Hi all

  A fix for App Builder is now in place, containing the fix for this problem.

  Here is the download URL: http://download.adobe.com/pub/adobe/digitalpublishingsuite/mac/cs/DPSAppBuilder-2.7.1.11.8 5393.dmg