Expert overview stopped playing the sound on track 1.  How it went?

Similar Questions

• Can't stop playing the sound.

  The problem is that I have a sound that plays inside a movieclip when the playhead passes a framework (inside the movieclip), this is controlled by an event listener:

  Multitouch.inputMode = MultitouchInputMode.GESTURE;

  stage.addEventListener (TransformGestureEvent.GESTURE_SWIPE, fl_SwipeToGoToNextPreviousFrame_4);

  function fl_SwipeToGoToNextPreviousFrame_4(event:TransformGestureEvent):void

  {

  if(Event.OffsetX == 1)

  {

  slipped right

  prevFrame();

  }

  ElseIf (event.offsetX == - 1).

  {

  slid left

  nextFrame();

  }

  }

  When the playhead in the maintime line, was an image before one containing said movieclip.
  swipe always causes the sound to play.

  
  I'm not sure why this happens and House to prevent it from happening

  Any suggestions would be greatly appreciated

  Thank you

  in the frame that contains your movieclip of journal, use:

  diary.addEventListener (Event.REMOVE_FROM_STAGE, removeF);

  function removeF(e:Event):void {}

  stage.removeEventListener (TransformGestureEvent.GESTURE_SWIPE, fl_SwipeToGoToNextPreviousFrame_4);

  }

• Media Player. I have a few movies on memory stick, but when I open the media player it only plays the sound track without video. Can help you!

  Media Player. I have a few movies on memory stick, but when I open the media player it only plays the sound track without video. Can help you!

  Hi Jim,.

  1. What is the operating system installed on your computer?

  2. What is the format of the file you are trying to play?

  3. it worked earlier?

  I suggest you to follow the steps and check if it helps.

  Installation of the Codec and check if it helps.

  Codecs: Frequently asked questions for Windows 7

  Codecs: Frequently asked questions for Windows Vista

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• 9650 blackBerry smartphones began to play the sounds of start/stop

  My phone has decided to start playing the sound at startup, shutdown and when I plug in my headphones.  It will do in silence and all alerts off profile as well.  No idea how I can get it to stop?

  Thanks in advance...

  Hi jhanka and welcome to the community of BlackBerry Support Forums!

  It seems that you have sound enabled on your BlackBerry® smartphone event.  To disable this feature, go to Options > Advanced Options > accessibility and change sounds event at no.

  Let me know if this worked for you.

  Thank you

• I see a file, when I play the sound comes on but no picture any suggestions thanks

  I downloaded a dvd of my home movies that I can see the files, but some play that for 29 seconds and one that says it's a little over an hour just plays the sound, even if I see the picture of him on the record at the beginning.

  Hello

  ·        What operating system is installed on your computer?

  ·        What is the type of file you are trying to play?

  ·        What application are you using to play the file?

  ·        Are you reading DVD file or you saved the file on the computer and then play?

  Method 1: If you play the DVD in Windows Media Player, then run the troubleshooter below and check if it solves the problem:

  Open the Windows Media Player DVD Troubleshoot utility

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter

  Note: applies only to Windows 7.

  Method 2: Alternatively, you can try to install the codec for the file type and check if it helps:

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  Windows Media Player frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Media-Player-frequently-asked-questions

  Note: applies to Windows Vista and Windows XP as well.

• Static instead of sound - whenever I'm playing the sound, all I get is static

  Whenever I'm playing the sound, all I get is static, if the volume is 100 or 5. What can I do to recover my sound?

  Hello

  1. what operating system do you use?
  2. you use headphones?
  3. the problem happens on the speakers and the headphones?

  Check what operating system you are using. See the link below:
  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  If you use Windows 7, then follow these steps:

  
  Step 2: try using the troubleshooting of Audio playback and check if it detects the problem.

  To open the troubleshooter of Audio playback:
  a. click the Start button and then click Control Panel.
  (b) in the search box, type troubleshooting and then click Troubleshooting.
  c. under hardware and sound, click on the audio playback problems.
  d. follow the instructions contained in the resolution of the problems.

  Refer to this article:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  
  Step 3: disable the optional speaker effects that are known as improvements and test

  Follow the steps below to disable the improvements:
  a. Click Start, and then go to the control panel.
  b. click sound.
  c. Select the playback tab.
  d. Enter select speakers/headphones
  e. click Properties
  f. Select enhancements tab
  g. disable all improvements
  h. restart the computer

  Refer to this article for help:

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Laptop stops playing the video in facebook and have to restart to get it working again?

  Laptop stops playing the video in facebook and have to restart to get it working again?

  Hello

  Try a new installation of the plugin flash/ActiveX as follows.

  First, download the Flash uninstall utility on the link below and save it in your downloads folder.

  Flash Player Uninstaller.

  Once the download is complete, close all the browser windows, open your downloads folder and run the program uninstaller.  After this has completed, restart the laptop.

  When windows has reloaded, download and install the latest version of Adobe Flash. Note: You can deselect the option to include McAfee Security Scan Plus before downloading.

  When the installation is complete, restart the laptop.

  ***************************************************************************

  If the above is not correct the problem, try the following.

  First of all, download and run the uninstall program of Shockwave on the link below.

  http://fpdownload.Macromedia.com/Get/Shockwave/Uninstall/Win/sw_uninstaller.exe

  After this has completed, restart the laptop.

  When windows has completely recharged, download and install the latest version of Shockwave on the following link.

  http://get.Adobe.com/Shockwave/

  Once again, after the installation, restart the laptop.

  Kind regards

  DP - K

• Windows Media Player only plays the sound of a dvd.

  When I put a dvd in my computer, it only plays the sound. No image appears.  How can I fix?

  If you hear the audio but not see the video, you are missing one of the codecs needed to play the file. For more information, see Codecs: frequently asked questions

  You can download and install ffdshow and check again: -.

  http://sourceforge.NET/projects/ffdshow-Tryout/

  or, try VLC Player: -.

  http://www.videolan.org/VLC/download-Windows.html

• How to stop all the sounds of root

  Sorry I'm a newvby in Actionscript.  I found the following script for a button that allow me to stop all the mc inside the root, but I need to stop all the sounds of the root as well.

  Any help is appreciated.

  
  Thank you

  on {(press)
  getAllMc (_level0);
  function getAllMc (mc) {}
  for (var i in mc) {}
  If (typeof mc [i] == "movieclip") {}
  MC [i]. Stop();
  getAllMc (mc [i]);
  }
  }
  }
  }
  

  You can use the stopAllSounds() function

• Stop the sound on mouseout/mouseouthandler() - how/where add code

  I read through several threads, but I can't figure out how or where to add the code for the sound to stop on mouseout/mouseouthandler(). I read the messages that buzz.js might be able to help, but I need advice to apply it.

  The project is included in the download. The US Landmarks each have an animation that starts a stopover on mouseover and mouseout/mouseouthandler(). I need the sound that goes with each animation to do the same.

  Firefox handles its OK at first but then seems to get glichy. Chrome keeps all the loop sounds whenever I mouseover.

  https://www.dropbox.com/s/x2iih9sgqff316i/SummerTips_052114_0430.zip  I apologize for the large file. I am looking for an alternative to a single sound file that is larger than 6 MB.

  It is my first project in environmental assessment. I learned EA as I build it (conversion of project Flash that someone else did a few years ago). I'm sure that there are more effective ways to do a lot of what I have here, but it works in the way he needs, except for the sound.

  I am open to any suggestion. Thanks in advance for the help.

  Lynn

  Hello

  There are some errors in your code above:

  In the mouseenter event:

  sym.getSymbol("space_shuttle").$("Spaceshuttlelift-off") [0] .play ("enter");

  There's no label "enter" for the audio element. It should be:

  sym.getSymbol("space_shuttle").$("Spaceshuttlelift-off") [0] .play ();

  The biggest problem is in the mouseleave event:

  sym.getSymbol("space_shuttle").$("Spaceshuttlelift-off") [0] .stop ("exit");

  The audio element is not a stop method. You must use the break and with no label in there, like this:

  sym.getSymbol("space_shuttle").$("Spaceshuttlelift-off") [0] () .pause;

  HTH,

  Joe

• Play the sound gun while the button is pressed.

  Hello

  I want my uzi sound to play when you press space and I know how to do this, but

  I want the sound to play for 2 images then the same sound should play again and stop the first of them starts from the beginning, when the space is pressed. In the opposite case they overlap only eachother and that sounds weird.
  And when the key is released the sound that is already beginned should play in it is Finnish.

  Thank you.
  Sorry for my English.

  Post edited by: antworker

  I assume that the code is in a loop.

  Create a new movieclip, attach your sound uzi in his first first image, set the mode of synchronization of your sound to convey to a 2nd non-key and drag the movieclip on the stage of the timeline that contains your code.  assign the movieclip an instance name, for example uzisound_mc.

  You can modify your code to:

  if(Key.isDown(Key.SPACE)){uzisound_mc.play()} else {uzisound_mc.stop();}
  

• My Windows Media Player will play the video of an MPG file, but it will not play the sound. What is the cause?

  I do video editing.  I transferred my camera video file and Windows Media Player played the video and audio very well at the beginning.  I edited the file with editing software and exported the file again.  Now, the sound will not play using WMP but it will play if I use video editing software.

  As a result, I've uploaded new files from the camera and now WMP not give me sound on those either.  If something seems to be affected by my WMP.  Any help you can give would be much appreciated.

  Hi rgosmond,

  (a) don't you get any specific error message when you play the video?

  (b) what is the file format of the resulting video file after editing by using the video editing software?

  (c) you are able to play the files on the computer? You hear the sound?

  I suggest you try the following steps:

  O make sure that windows MediaPlayer is not muted, press F7 on the keyboard to turn the sound back on.

  Ø check if the volume is at a minimum in Media Player, press F9 on the keyboard to increase the volume.

  Verify that the default audio device is correctly set

  1. click on start, type Sound in the box to start the search.

  2. click on sound in the results of search at the top of the start menu.

  3. click on the tab reading notice the check mark next to the default device. For most users, the default device is speakers. Make sure that the audio settings are configured as expected. Follow these steps:

  4. on the playback tab, select the playback device, click Properties, click the Advanced tab and make sure that the default Format is set to the value you expect. When you are finished, close this window to return to the previous window.

  5. on the playback tab, select the playback device, click on configure and make sure that the configurations are set correctly.

  6. If the sound settings are well positioned, you are using speakers as the audio device and your speakers are already set as the default device, go to method 5 now.

  7. Select the audio device you want as the default audio device and then click on set as default.

  8. click OK to save your settings and close the sound dialog box.

  Now, check if the problem is resolved.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Event QtQuick App cannot play the sound on the playbook + other problems

  Hello

  I wore a qtquick running on BB10-based application successfully. My long-term problem, it's that my applications cannot play the .wav sounds. He used the QtMobility on symbian. I am looking for a replacement and trying to adapt with open AL example in BlackBerry Github, but hopeless.

  Here is the source code: https://gist.github.com/fe1fcbbb6753bb7ff06b

  I'm lie the audio to the qtquick with the setcontextproperty method qml file. I checked with console.log () it is called.

  I wonder that the problem between the location of the file or the method is not called.

  my sounds is located under directory

  QML/stem/sounds/from the root.

  I also find that I don't see no output from qDebug.

  I use the Qt Creator for PlayBook. I wonder if I can use the momentics?

  Thanks for help. I expect to release my app before the release of BB10

  I have my solution for this problem. I opened my .pro via momentics IDE. I clicked the right mouse in the project > set up > add libraries > check list all libs > then follow the cheats provided to change the .pro files. Simple and it works.

• Cannot play the sound on my device.

  Original title: his record game

  Hello everyone, my sound device is not open today, so am gona do troubleshoot-made his does not and make the system also does not restore and search in the Device Manager, I find that here, so I don't know what to do.

  Hi Mazin,

  I appreciate the efforts to solve the problem. Until we provide troubleshooting steps, we would like to know as a result of information from you.

  (1) what is the brand and model of your computer?

  (2) don't you make changes to the settings of the sound before this problem?

  (3) what happens when you try to open an audio file? You get the error message?

  (4) deal with any problem during recording?

  You might face this problem because of corrupted audio drivers. Follow the steps in the link below. It includes convenience store and other base drivers his troubleshooting.

  No sound in Windows

  http://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I suggest you to give us the details of the event viewer. Event Viewer contains the details of the significant events on your computer. Note the time at which you try to play audio files and then provided details of same time of event viewer. You can follow the steps below.

  Open event viewer

  http://Windows.Microsoft.com/en-in/Windows7/open-Event-Viewer

  Write us with the details asked. We will help you to come.

• Windows media player and youtube stops playing the music in a game full screen

  When I play music on my windows media player, I reduce it then go to another program which is a game LoL which is a game fullscreen. This also happens with youtube.

  Hello

  1. what game are you talking about?
  2. when the problem started?
  3. have you done any software or hardware changes to your computer recently?

  Please provide us with more information about the issue so that we can better guide you.

  I suggest you check the following settings.

  a. click Start, click Control Panel, and then double-click sounds.

  b. in the sound dialog box, click on the playback tab, click the speaker device and then click Properties.

  c. click on the Advanced tab, clear the checkbox "allow applications to take exclusive instrument control" and then click OK.

  d. also uncheck the option "give exclusive mode applications priority'.

  Check if it helps.