Export problems: do not match the size of the artboard
Hello
I use a single file to do a lot of banner in Illustrator, I put each banner in a single plan of work. When I export in PNG or JPG file changes size even if the artboard, it's okay. For example, the work plan is 300 x 500, the exported file is 301 x 501... Something appens during export. How is it possible to solve?
You must ensure that your work is contained in the whole pixel dimensions. Best to turn on Align to Pixel grid in the transformation Panel.
Tags: Illustrator
Similar Questions
-
total size of the files of Windows 7 does not match the size of partition
In the D: partition
total space: 265 GB free space: 59.1 GB
There is only one visible folder: Daisy, size: 87.4 GB from the Explorer
Other records hidden three: info Volume system, c:\Windows\Msdownld.tmp, $RECYCLE. BIN takes up almost no space
Of course free space does not match the file size.
Do not partition system, no problem to update windows and restoration, sleep or page file.
Some strange things:
1. with the help of file size 3.4 correctly see the size of the file
Daisy file occupies 206GB
Once I copied the whole file to the other partition Daisy
and the result is the record more like 2xxGB
so I guess that 206GB is the right size
/////////////////////////////////
may be ignored.
2 folder being read-only Daisy
Even uncheck or untick read only box in the properties of the folder does no effect
After loading, it still shows read only
3. 'read only' does not work
2, daisy file is read only
but I managed to delete files inside
////////////////////////////////
////////////////////////////////
Is it a mistake to folder structure?
It's a newly installed windows, so I guess that windows is clean
Hope to see the solution and identify the problem
Thank you very much
OK, based on your new information, the error is that Daisy is 206 GB but Windows Explorer reports it as 87GB.
No other information seems more relevant.
Ideas-
1 run ChkDsk on the drive - [first of all, make sure you have a backup of Daisy or make a new backup always] in Windows Explorer, right-click on the drive & select Properties, then the Tools tab, then click the check now button, turn off the option to make repairs in first to see if there are errors or not before making any decision as repairs can delete or corrupt files which are reported in the file allocation table.
2. find another utility that measures the size of record to help you track down all the difference here. TreeSize Free will be repeated.
I do not understand your comment "later, I found the reason why I can't locate the"office"is the language of auto change." It's in Chinese at first but watch the 'bureau' cmd"that this had not been mentioned before.
Denis
-
Original title: I have a computer toshiba M30 laptop and I'm on windows7. problem is that I can't play at bigfish games?
HI the error I get is: your video card setting does not match the system minimum requirements:
The size of the texture at least 2048 x 2048 DXT1 & dxt5 Texture formats support of the target.
Thank you Joe
Hey Joe,
Thanks for the post.
We need a few more details to help games play question, please answer the following questions.
1. is this problem limited to Bigfish?
2 do you have any problem with other games?
You will need to install a graphics controller (video card) which can meet these minimum requirements.
You can go through the following link; who helps update the graphics card, this could solve the problem.
Update a hardware driver that is not working properly.
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
You can also download and install the latest display driver by downloading from the website of the manufacturer of the computer.
http://support.Toshiba.com/drivers
I hope this helps.
-
I have updated from Windows 95 to Windows XP Home Edition, after that my hard drive crashed on my old computer. I had a rarely used, but more recent computer wiped and had XP reloaded with works for Windows 95. Whenever I have print in Microsoft Works 4.5 of the window, I get the 'documents and settings of the printer do not match. Size and orientation of the page for your printer do not match the settings in your document and the size of the page. Looks like there will be a simple way to solve his problem. Please notify. I am able to print. But after 3 weeks of this message, I final received a fatal error of Microsoft works just after printing. I think it came from this problem. Not sure. I'm not a technical person. Please note the computer I'm talking doesn't only do not have access to the internet.
You have posted to a group of win7, but seem to be using Windows XP
There is an article about this err, usually caused by the used printer, especially Epson printers drivers
-
The application cannot be installed because of a certificate problem. The certificate does not match the certificate of the installed application, does not support upgrades of the application or is not valid. Please contact the application author.
That's what I have I am trying to download adobe programs
which is not a download error unless you use some sort of download manager/assistant that is also trying to install. do you have a download manager/assistant?
or is it an error of installation and, if so, what type of program (name and version) are you trying to install?
-
How do I download a trial of 12 items, Adobe?
I followed the instructions to download assistant... but get this message: the application cannot be installed because of a certificate problem. The certificate does not match the certificate of the installed application, does not support upgrades of the application or is not valid. Please contact the author of the application.
Hi alposer,
Please delete the copy of Adobe Download Assistant you have installed, and then reinstall Adobe Download Assistant.
Kind regards
Rave
-
Signature App, number of Folios error does not match the main file Folio
Hi all;
I have a standalone application of 250 pages that I'm trying to compile for the Apple Store. I've read through the forums and enabled "AppBuilderLoggingEnabled.cfg" in my home directory of the user to discuss the issue. Here is an excerpt of the newspaper which has been created which, to me, shows why the app is not signed.
46386 codesign ERROR [main]. Signatory - failure during the signature
java.lang.RuntimeException: invalid package, number of folios does not match the primary file (Folio.xml or Issue.xml) 251-250 folio
at com.adobe.devtech.codesign.IPAOutputHelper.convertFolioProduceFormatToFolio (IPAOutputHelp er.java:272)
at com.adobe.devtech.codesign.IPAOutputHelper.replacePlaceholderFolio (IPAOutputHelper.java:1 92)
at com.adobe.devtech.codesign.IPAOutputHelper.execute(IPAOutputHelper.java:82)
at com.adobe.devtech.codesign.Signer.sign(Signer.java:169)
at com.adobe.devtech.codesign.Signer.processArgs(Signer.java:106)
at com.adobe.devtech.codesign.Signer.main(Signer.java:46)
46388 codesign ERROR [main]. Signatory - error: invalid package, number of folios does not match the master folio (Folio.xml or Issue.xml) 251-250
I deleted special characters in the article titles and rebuilt the app only to deal with the same error. I have advanced and created a new AppID in the portal to Apple developers, created new files available, and the error remains. I am now to create a new folio and import the items into the new folio to see if that will solve the problem of "number of folios does not.
Any help or idea would be amazing. Thanks to you all.
-mat
I created a new folio and all items imported again. After hitting "Create App" for this new folio, to about 10 pages in a 'PDF Export' error stopped the app creation process. I went in InDesign to update the layout for the 10 page to see that the PDF export issue kept me from updating the page layouts as well. Some thing in the InDesign file was not playing nice with the creation of folio, so I created two new InDesign files, deleted the article and built a new article from scratch. I was able to import the new page in a new article to the main folio and click on "Create App" again. This time he had no problems with the creative process. I have synced files available in App Builder and could sign the application code.
I guess the moral of the story is to double and even triple check each item along the way to make sure there is no problem, is introduced into the process that eventually causes headaches during the phase of distribution of creating applications!
-mat
-
The color in printed images is not match the colors on the screen
I've recently updated to an iMac, retina 5K and the colors in the printed images do not match the colors of the image on the screen. I use CS6 and the screenshot below shows that, in the window of the print settings CS6 image does not match the image of origin either, the original image on the left. I've updated all print drivers, and the images are also too green/faded when I print them, or download them on Animoto or Mpixpro. We tried a Spyder calibration system, and that did not help. For now, I have to make a folder separate with "twisted" images that have increased the saturation and Communists to give them a normal appearance. Does anyone else have this problem?
Unless you have a current color profile for the display you are using and you have calibrated the printer for the specific of ink and paper that you are using, its not surprising there are differences. Without a color managed workflow screen and software have no information on what the printer can produce.
The range Spyder products are not up to the task.
The normal options for managing your color workflow are:
1. using the X-Rite i1 photo system,
2. purchase of a custom profile for your type of printer, paper and ink, done by a specialist in color management
3 - Send your files to a professional lab that is capable of producing quality work.
-
Parameters specified by step do not match the settings of the sequence
I just upgraded from Teststand 4.1.1 to 4.2 and have encountered this
problem during the review of the existing sequence files.
When I open a file of sequence, select any stage of type sequence call, which calls another sous-séquence
in a different sequence file, I learned that the parameters used do not correspond to those required.
To be more precise, in the settings area of the stage, a red exclamation symbol appears at the side of the
subsequence called step, and the ToolTip is displayed when the mouse pointer is
hovered over the exclamation point States:
"Parameters specified by the step do not match the settings of the sequence."
The ToolTip goes on to explain how to solve this problem by clicking on the exclamation symbol.
I find also that by deselecting the "Prototype using sequence" tab in step Settings\Module
solves the problem.
When the sequence is executed, no problems occur with execution, the test performs correctly.
Is it possible to clear this error for each sequence call not in one operation?
Thank you
Gary.
My apologies to attach a file of sequence buggy. I forgot to pass a parameter to the LoadPrototype method to preserve existing settings. I have attached a corrected version of the sequence file. I changed to update SequenceCall not only because of potential problems, reloading the DLL prototypes.
I would try to explain why you see cela TestStand 4.2. The additional results feature, we added to TestStand 4.1 needs to know what parameters are entered, output and input/output (i.e. what settings is pass by reference). Before TestStand 4.1, step of calling sequence does not store this information but rather dynamically got it and it appears in the column how go. Now that we store the past by reference with the step option, you can have an inconsistency between the option stored in step and the current setting of the sequence called. This inconsistency affects only additional results and not execution. TestStand 4.1, the sequence editor to not warn you on these inconsistencies. We have added the TestStand 4.2 warning so that you will have the correct information for additional results.
When TestStand 4.1 or 4.2 load a file of sequence from a pre-version 4.1 version, TestStand sets cervical optionally reference true for all parameters in the call sequence steps. This is why you see the warning for any sequence calling step created TestStand 3.5 If no parameters are not passing by reference. You can also see the problem if you change the option collar called a reference parameter in the sequence.
-
Harger W530 AC does not match the Jack of the portable power
I just got my new W530, but I can't load it. Looks like 170W AC/DC charger is just, but somehow the physical connector does not match the power supply of the portable computer. Charger AC/DC 170W is not circular but with two small rectangles, however W530 is completely circular. Someone had the same problem? I try to return W530 that looks like it was made of bad sense but takes to always come back. any recommendations? Technical service told me since it is within 21 days after the delivery, I better return.
Technical service is great
But after the sale to get back really really bad!
It's quad-core, it requires 170W "brick" AC load, which has one taken not circular.
-
I changed my router to another wireless. Since then, my laptop cannot connect to my wifi. When I search my wireless network, it is exed out in red. and the message "the settings saved on this network do not match the network requirement"... Please help
[moved from comments]
Hey Mike,
-What version of Windows is installed on the computer?
This problem usually occurs with wireless networks. I suggest you try the suggestions in http://answers.microsoft.com/en-us/windows/forum/windows_vista-networking/the-settings-saved-on-this-computer-does-not-match/a82432f2-9312-480a-b2ea-720033c73387
Let us know if this can help, or if you have any questions.
-
hardware device
my wireless network is displayed with a cross and will not let me connect saying settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again :(Hello
What operating system installed on the computer?
Note: Look for errors in the network card device manager.
Method 1: Follow the article mentioned below, if you are using Windows 7 operating system.
Using the troubleshooter from network in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
Method 2:
He looks at the IP address and other parameters are not set correctly, I suggest you contact your Internet service provider or provider router wireless to help on this.
For more information, follow the below mentioned article:
Set up a wireless router:
http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router
Follow the below mentioned articles and see if they help you:
Set up a wireless network:
http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network
Wi - Fi and in Windows network connection issues:
Wireless network card: frequently asked questions:
http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions
-
When my computer after starting the antivirus and Skype loaded,.
I recently started to get warning of security box appear. The attachments show you what I see.
I am told "the name on the security certificate is invalid or does not match the name of the site"
Whether I click Yes to "do you want to proceed", nothing happens.
How to make this security alert disappear from the start-up procedure?
Thanks for your advice
Marty783
Thank you PML
Problem is now solved.
Was a corrupted version of IE6, which, when updated to IE8, fixed the problem. -
I just got my SP3 for my XP machine, I tried to start the download of Microsoft ie8 and I got this message:
"The version of IE you have installed does not match the update you are trying to install." error no. KB2618444
I'd appreciate any help that I couldn't solve this problem!
Thank you!
E-mail address is removed from the privacy *.
Original title: error KB2618444setup
I do not understand your question. Download IE8? Do you mean the installer for IE8? It's here.
You try to install KB2618444? They make 3. For IE6, IE7, and IE8. You probably download one from a different version of Internet Explorer you have...
I'm going to guess you really want that for IE8.
That's it: IE8-WindowsXP-KB2618444 - x 86 - ENU.exe -
Hi there... How can I sort this problem as this message looks back constantly on google Account... ERROR POSSIBLE WITH GWT. The value of time compilation agent MODULE XML FILE user (ie6) does not match the value of user.agent (ie8) run time
Hello nEve Adam,.
Thanks for the return of the response. Below, I've added some links Google support on this issue. I hope this helps.
ERROR: Problem Possible with your *. GWT.XML file module. The value of compile time user.agent (opera) does not match
http://www.Google.com/support/forum/p/blogger/thread?TID=2d6d9bd1326a07c4&hl=en
In addition,
Message from Web page
Maybe you are looking for
-
HDMI port no longer works on Satellite Pro R50 - B
I was using an AOC monitor as a second monitor attached to my laptop via HDMI Windows 8.1. The monitor says there is no signal from the HDMI port. I changed the cable and changed the port on the monitor, but it still does not work. Can you help me?
-
How can I delete pages in a 3D table, based on the conditions in two columns
Given the enclosed 3D range I would delete any page that has BOTH 3 900002 chain in the second column AND the string "00 00 00 00 00 00 00 00" in column 5. Any ideas on how to do this? Thank you.
-
This is the error I get.This error [error number: 0x8DDD0002]To install the updates from this site, you must be logged in as an administrator or a member of the Administrators group on your computer. If you use Windows XP, you can see if you are an a
-
HP psc 1219 all-in-one will not print. Work queue says "error".
Operating system: Mac OS X 10.6.8 on a Macbook 5,2 At first, I was getting "printer offline" error messages when all cable connections were good. I uninstalled and reinstalled the driver software on the HP site and now the macbook and printer communi
-
OfficeJet 6310: Difficulties installing my OfficeJet 6310
I tried to uninstall my HP Officejet using IObit Uninstaller, and that seemed to work. However when I go to reinstall from my HP for Vista disk, it shows the program is still installed, but will not uninstall and will not re - install the program. I