Export results in error of 2 Win32 API

Similar Questions

• Why create an FPS result in error 405 with vShieldManage API

  I have create a FPS with vShield Manager API, but vShield reports http respone '405 method not allowed' error with the news of body: method 'POST' unsupported Requet.  While both queries and change FPS API works OK. Why? the vshield_5.0_api.pdf is written as follows:

  Create a FPS on a scope
  You can create a new FPS in the specified scope.
  Example 2-19.  Create FPS on a scope
  Request:
  POST https:// < vsm - ip > /api/2.0/services/ipset/scope/ < scope-moref >
  Example of application of body:
  < ipset(8) >
  < objectId / >
  < type >
  < typeName / >
  < / type >
  < description >
  New Description
  < / description >
  < name > TestIPSet2 < / name >
  < revision > 0 < / revision >
  < objectTypeName / >

  < value > 10.112.201.8 - 10.112.201.14 < / value >
  < / ipset(8) >

  More info: I want to create a FPS with moref-scope of portgroup id of vCenter.

  Just remove the URL scope, and it should work.

  -POST POST https:///api/2.0/services/ipset/ https:///api/2.0/services/ipset/scope/

• Error of 2 Win32 API ("the system cannot find the file specified.") When calling ShellExecuteExW from A

  I can't export images after processing in Lightroom (latest version) 5. See the message on top.

  At the bottom of the export dialog box, this pop-up is probably empty.  Select do nothing to do or another option and it should disappear.

  

• Failed to export.  Receive a notice of error 2 Win32 API whenever I try to export.  Says it can't locate the files.  Huh?

  Ok

  I get a system error whenever I try to export. "An internal error has occurred: error in Win32 API 2 (the system cannot find the specified file) when the Shell Execute ExW of the AgWorkspace.shellExecute." "  Scary sounds.  In essence, LR 5.6 has just crashed and burned.  Anyone out there have a clue?

  Thank you

  Russell Abraham

  [email protected]

  I use Windows 64, but I get the 2 Win32 API error when exporting?

• error message win32 API error2 when calling ShellExecuteErW from AgWorkspace.shellExecute

  After the export command I get the message: internal error: win32 API call ShellExecuteErW of AgWorkspace.shellExecute error2. System is only export Thumnails.

  The system is windows8, 64 bit Lightroom 5.2 (latest version)

  At the bottom of the import dialog is a popup marked post processing.  No doubt it is currently empty.  Set it to nothing do and try the export again.

• Error of the 2 Win32 APIs, impossible to find ShellExecuteExW form AgWorkspace.shellExecute

  I get this error: error in the 2 Win32 APIs, impossible to find ShellExecuteExW form AgWorkspace.shellExecute

  When you run my gout, that worked a few days ago.

  Have been install and reboot a new install of WIN 10 and LR, PS CC
  Hope someone can help me.

  JohnRellis,

  interesting.  When you run DNG... 11 seems to be my limit... even in LR, CC PS updated to the current.

  I just ran "Processor of Image" in PS CC... and it seems that it can last forever (done properly).
  BUT, Yes... the problem... and time killer is, you must import it in (I do a SYNC)... and then manually regroup with the DSP on the top.

  Wish Adobe would update image processor to... Auto Import and group with the DSP on the top of the stack.

  Thank you John for all the help.

  Ross

• Error code trojandownloader: win32/unruy.h & Google or Bing redirects to some other Web pages on the Windows XP computer.

  Original title: error code trojandownloader:win32 / unruy.h

  This error code will not or is not removed by the essential update of Mircosofte. I can scan my system with Micorsoft and malware. It won't go away. It redirects my serch Google or Bing to a single purchase page. Does anyone know a fix for this and it happens. It seems that Microsoft knows this, but have not set. Thanks Hank

  Hi Hank,

  You can follow this link & check if the problem persists.

  How to restore a hijacked web browser

  Reference: only what the browser hijacking?

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Trying to empty the queue through dbms_aqadm resulting in error

  Hello

  I'm emptying the queue through dbms_adadm in the respective user schema, resulting in error

  Procedure:

  DECLARE

  Po dbms_aqadm.aq$ _purge_options_t;

  BEGIN

  Po. Block: = FALSE;

  () dbms_aqadm.purge_queue_table

  Table of the queue = > 'XYZ_QUEUE_TABLE '.

  purge_condition = > po);

  END;

  /

  Error:

  PLS-00201: identifier 'DBMS_AQADM' must be declared.

  Check if the required privilege is granted to your USERS access to the SYS. DBMS_AQADM. Also if a public synonym for DBMS_AQADM is not defined then you will need to prefix SYS during the call to the package.

• Trying to send a scanned document and I get an error of missing file: api-ms-win-crt-string-11-1.0.dll never had a problem before and I've recently updated to the office of 2016 and that's when I got this message.

  Trying to send a scanned document and I get an error of missing file: api-ms-win-crt-string-11-1.0.dll never had a problem before and I've recently updated to the office of 2016 and that's when I got this message.   Anyone know if it's related to Adobe or Outlook?  I am able to send emails on Outlook.

  Thank you

  Hi lorid74531323,

  Latest version of MS office will not work with your Acrobat 9.

  May be a compatibility issue, please check the web browsers and applications of PDFMaker

  Kind regards
  Nicos

• Need help to export results to csv format script

  Hi guys,.

  Need help, export results to csv can someone help me. Thank you.

  Connect-VIServer test

  $cluster = 'test '.

  $clustername = get-cluster $cluster

  $Clusters = get-View - ViewType ComputeResource |? Name - as $clustername.name

  $Clusters | % {

  $Cluste = $_

  $VMHostsView = $null

  $VMHostsView = get-view $Cluste.Host - name, Hardware Config, property

  $VMss = $clustername | Get - VM

  $HostCount = ($VMHostsView |) Measure - Object). County

  $VMCount = 0 + ($VMss |) Measure - Object). County

  $VMsPerHost = [math]: round (($VMCount/$HostCount), 1).

  $vCPU = 0 + ($VMss: measure-object-sum - NumCPU property). Sum

  $allocatedram = 0 + ($VMss: measure-object-sum - memorygb property). Sum

  $avgrampervm = [math]: round (($allocatedram/$VMCount), 1).

  $pCPUSocket = ($VMHostsView | % {$_.}) Hardware.CPUInfo.NumCpuPackages} | Measure - Object - sum). Sum

  $TpCPUSocket += $pCPUSocket

  $pCPUCore = ($VMHostsView | % {$_.}) Hardware.CPUInfo.NumCpuCores} | Measure - Object - sum). Sum

  $vCPUPerpCPUCore = [math]: round (($vCPU/$pCPUCore), 1).

  $onenode = [math]: tour ((Get-Cluster $cluster |)) Get-VMHost | Select - 1 first | (measure - object - property memorytotalGB-sum) .sum)

  $twonode = [math]: tour ((Get-Cluster $cluster |)) Get-VMHost | Select - first 2 | (measure - object - property memorytotalGB-sum) .sum)

  $onenodepcpucores = [math]: tour ((Get-Cluster $cluster |)) Get-VMHost | Select - 1 first | (measure - object - property numcpu-sum) .sum)

  $twonodepcpucores = [math]: tour ((Get-Cluster $cluster |)) Get-VMHost | Select - first 2 | (measure - object - property numcpu-sum) .sum)

  $totalclusterpcores_failover1 = $pcpucore - $onenodepcpucores

  $totalclusterpcores_failover2 = $pcpucore - $twonodepcpucores

  $TotalClusterRAMGB = [math]: tour ((Get-cluster $cluster | get-vmhost | % {$_} | mesure-objet-propriété memorytotalGB-somme) .sum)

  $TotalClusterRAMFailoverOne = [math]: round (($TotalClusterRAMGB-$onenode))

  $TotalClusterRAMFailvoerTwo = [math]: round (($TotalClusterRAMGB-$twonode))

  $TotalClusterRAMusageGB = [math]: tour ((Get-cluster $cluster | get-vmhost | % {$_} | mesure-objet-propriété memoryusageGB-somme) .sum)

  $TotalClusterRAMUsagePercent = [math]: round (($TotalClusterRAMusageGB/$TotalClusterRAMGB) * 100)

  $TotalClusterRAMFreeGB = [math]: round (($TotalClusterRAMGB - $TotalClusterRAMUsageGB))

  $TotalClusterRAMReservedGB = [math]: round (($TotalClusterRAMGB/100) * 15)

  $TotalClusterRAMAvailable = [math]: round (($TotalClusterRAMFreeGB - $TotalClusterRAMReservedGB))

  $TotalClusterRAMAvailable_FailoverOne = [math]: round (($TotalClusterRAMAvailable-$onenode))

  $TotalClusterRAMAvailable_failoverTwo = [math]: round (($TotalClusterRAMAvailable-$twonode))

  $TotalClustervcpuperpcore_FailoverOne = [math]: round (($vCPU/$totalclusterpcores_failover1), 2)

  $TotalClustervcpuperpcore_failoverTwo = [math]: round (($vCPU/$totalclusterpcores_failover2), 2)

  $newvmcount = [math]: round (($TotalClusterRAMAvailable/$avgrampervm))

  $newvmcount_failover1 = [math]: round (($TotalClusterRAMAvailable_failoverone/$avgrampervm))

  $newvmcount_failover2 = [math]: round (($TotalClusterRAMAvailable_failovertwo/$avgrampervm))

  $afternewvmvcpu1 = $vcpu + $newvmcount

  $afternewvmvcpu2 = $afternewvmvcpu1 + $newvmcount

  $new1vcpupcpuratio = [math]: round (($afternewvmvcpu1/$pCPUCore), 1).

  $new2vcpupcpuratio = [math]: round (($afternewvmvcpu2/$pCPUCore), 1).

  New-Object PSObject |

  Add-Member-pass NoteProperty 'NOMCLUSTER' $clustername.name |

  Add-Member-pass NoteProperty 'TotalClusterHostCount' $HostCount |

  Add-Member-pass NoteProperty 'TotalClusterVMCount' $VMCount |

  Add-Member-pass NoteProperty "of AverageVM / Host" $VMsPerHost |

  Add-Member-pass NoteProperty 'TotalClusterpCPUSocket' $TpCPUSocket |

  Add-Member-pass NoteProperty 'TotalClusterpCPUCore' $pCPUCore |

  Add-Member-pass NoteProperty 'TotalClustervCPUCount' $VCPU |

  Add-Member-pass NoteProperty ' TotalClustervCPU/pCPUCore' $vcpuperpcpucore |

  Add-Member-pass NoteProperty "TotalClustervCPU/pCPUCore after 1 failover" $TotalClustervcpuperpcore_FailoverOne |

  Add-Member-pass NoteProperty ' TotalClustervCPU/pCPUCore after Failvoer 2' $TotalClustervcpuperpcore_Failovertwo |

  Add-Member-pass NoteProperty 'TotalClusterRAMGB' $TotalClusterRAMGB |

  Add-Member-pass NoteProperty 'TotalClusterRAMGB_Failover1' $TotalClusterRAMFailoverOne |

  Add-Member-pass NoteProperty 'TotalClusterRAMGB_failover2' $TotalClusterRAMFailvoerTwo |

  Add-Member-pass NoteProperty 'TotalClusterRAMUSAGEPercent' $TotalClusterRAMUsagePercent |

  Add-Member-pass NoteProperty 'TotalClusterRAMUsageGB' $TotalClusterRAMusageGB |

  Add-Member-pass NoteProperty 'TotalClusterRAMFreeGB' $TotalClusterRAMfreeGB |

  Add-Member-pass NoteProperty 'TotalClusterRAMReservedGB(15%) '. "$TotalClusterRAMReservedGB |

  Add-Member-pass NoteProperty 'RAM available for NEW virtual machines in GB' $TotalClusterRAMAvailable |

  Add-Member-pass NoteProperty 'RAM available for NEW virtual machines in GB after 1 failover' $TotalClusterRAMAvailable_FailoverOne |

  Add-Member-pass NoteProperty 'RAM available for NEW virtual machines in GB after failover 2' $TotalClusterRAMAvailable_FailoverTwo |

  Add-Member-pass NoteProperty 'Allocated RAM by virtual computer on an average' $avgrampervm |

  Add-Member-pass NoteProperty 'NEW virtual machines that can be configured based on the average of RAM virtual computer' $newvmcount |

  Add-Member-pass NoteProperty 'NEW virtual machines that can be configured based on the average of RAM virtual computer after 1 failover' $newvmcount_failover1 |

  Add-Member-pass NoteProperty 'NEW virtual machine that can be provisioned littleboy average RAM per virtual computer after failover 2' $newvmcount_failover2 |

  Add-Member-pass NoteProperty "vCPU/pCore ratio after new VM provisioning with 1vcpu" $new1vcpupcpuratio |

  Add-Member-pass NoteProperty ' vCPU/pCore ratio after new VM provisioning with 2vcpu' $new2vcpupcpuratio

  }

  Get-cluster $cluster | Get-vmhost | % {

  $vmhost = $_

  $VMHostView = $VMHost | Get-View

  $VMHostModel = ($VMHostsView | % {$_.}) Hardware.SystemInfo} | Model object-group | Sort - down County | Select - 1 first). Name

  $VMs = $VMHost | Get - VM #|? { $_. PowerState - eq "Receptor"}

  $TotalRAMGB = [math]: round ($vmhost. MemoryTotalGB)

  $TotalRAMUsageGB = [math]: round ($vmhost. MemoryUsageGB)

  $TotalRAMfreeGB = [math]: round ($TotalRAMGB - $TotalRAMUsageGB)

  $PercRAMUsed = [math]: round (($TotalRAMUsageGB/$TotalRAMGB) * 100)

  $TotalRAMReservedFree = [math]: round (($TotalRAMGB/100) * 15)

  $TotalRAMAvailable = [math]: round (($TotalRAMfreegb-$totalramreservedfree))

  New-Object PSObject |

  Add-Member-pass NoteProperty 'VMhost' $vmhost. Name |

  Add-Member-pass NoteProperty model $vmhostmodel |

  Add-Member-pass NoteProperty Sockets $VMHostView.Hardware.cpuinfo.NumCPUPackages |

  Add-Member-pass NoteProperty Cores $VMHostView.Hardware.cpuinfo.NumCPUCores |

  Add-Member-pass NoteProperty son $VMHostView.Hardware.cpuinfo.NumCPUThreads |

  Add-Member-pass NoteProperty VMCount (($VMs | mesure-objet).) County) |

  Add-Member-pass NoteProperty vCPU (0 + ($VMs: measure-object-NumCPU of the sum).) Sum).

  Add-Member-pass NoteProperty vCPUperCore ((0 + ($VMs | mesure-objet-NumCPU de la somme).)) Sum)/$VMHostView.hardware.cpuinfo.NumCPUCores) |

  Add-Member-pass NoteProperty 'RAMGB' $TotalRAMGB |

  Add-Member-pass NoteProperty 'RAMUsageGB' $totalramusageGB |

  Add-Member-pass NoteProperty 'RAMFreeGB' $totalramfreeGB |

  Add-Member-pass NoteProperty 'RAMUsage %' $PercRAMused |

  Add-Member-pass NoteProperty 'RAMReservedGB(15%) '. "$totalramreservedfree |

  Add-Member-pass NoteProperty 'RAM available for NEW virtual machines in GB' $totalramavailable

  }| Sort VMhost | FT-auto * | Out-String-width 1024

  See the attached script

• ELQ-00107 errors during the export of the activity with the REST API data in bulk (2.0)

  I'm following the flow described in bulk API Documentation v2.0

  I POST to https://secure.Eloqua.com/API/bulk/2.0/activities/exports and back (note: I work in python, so it's all the deserialized json)

  {u 'createdAt': u'2014 - 08-14T 07: 05:17.6413979Z',}

  u 'createdBy': u'P of,

  u 'fields': {u 'ActivityDate': u'{{Activity.CreatedAt}} ',}

  u 'ActivityId': u'{{Activity.Id}} "},"

  u 'filter': u "('{{Activity.CreatedAt}}' > ' 2014-07-31T23:43:02.080971Z' ET '{{Activity.Type}}' = 'EmailOpen') ',"

  u 'name': u 'blarg3 ',.

  u 'updatedAt': u'2014 - 08-14T 07: 05:17.6413979Z',.

  u 'updatedBy': u'P of,

  u 'uri': u ' {/ activities/exports/275 '} '.

  Then I POST on /syncs and get back

  {u 'createdAt': u'2014 - 08-14T 07: 05:31.6571126Z',}

  u 'createdBy': u'P of,

  u 'status': u 'pending',

  u 'syncedInstanceUri': u ' / activities/exports/275 ', '.

  {u 'uri': u'/ synchronization/17790 '}

  Now (unfortunately) I GET/synchronization/17790 and/syncs/17790/logs

  {u 'createdAt': u'2014 - 08-14T 07: 05:31.9330000Z',}

  u 'createdBy': u'P of,

  u 'status': u 'error',

  u 'syncStartedAt': u'2014 - 08-14T 07: 05:32.6570000Z',.

  u 'syncedInstanceUri': u ' / activities/exports/275 ', '.

  {u 'uri': u'/ synchronization/17790 '}

  {u 'count': 2}

  u 'hasMore': false,

  u 'items': [{u 'count': 0}]

  u 'createdAt': u'2014 - 08-14T 07: 05:33.3770000Z',.

  u 'message': u 'There was an error in processing of export.',

  u 'severity': u 'error',

  u 'statusCode': u 'ELQ-00107',.

  {u 'syncUri': u'/ synchronization/17790 '},

  {u 'count': 0,}

  u 'createdAt': u'2014 - 08-14T 07: 05:33.3930000Z',.

  u 'message': u 'Sync to sync 17790, resulting from the error status.',

  u 'severity': u 'information',

  u 'statusCode': u 'ELQ-00101',.

  [{u 'syncUri': u'/ synchronization/17790 '}],

  u 'limit': 1000,.

  'offset' u: 0,

  {'u' totalResults: 2}

  All that I can find ELQ-00107 is "ELQ-00107: there was an error in processing the {type}."

  Any thoughts on what I can hurt? Pointers on how I can further debug?

  Thank you!

  Joel Rothman-Oracle Allison.Moore Christopher Campbell-Oracle Ryan Wheler-Oracle

  Hi pod.

  Try to remove all the void second precision of the elements in date filter.  '{{Activity.CreatedAt}}' > ' 2014 - 07-31T 23: 43:02.080971Z' becomes '{{Activity.CreatedAt}}' > ' 2014 - 07-31 T 23: 43:02Z'.  The second precision is not supported for export activity.

• The 193 Win32 API error. Cannot call the C function: private_load_AgCoreTest

  Hi guys,.

  When I try to run Lightroom, I get the following error messages:

  • Win 32 API error 193 ("(erreur inconnue)" ") when you call: load the getCFunction library
  • Cannot call the C function: private_load_AgCoreTest

  So I can't access my library or to make a new library by importing files.

  I run it on a laptop with Windows 10 64-bit, Nvidia GeForce 850 m GTX and a processor Intel Core i7 with 12 GB of RAM and a 500 GB SSD (Samsung 840 EVO). All with the latest drivers.

  I tried already to unninstall and reinstall the program, all my packages of Visual C++ and the dll. I also already checked my permissions for the folder from catalog and granted full access. I also tried to run Lightroom as administrator.

  None of these solved the problem.

  What should I do?

  According to the notes, they followed the instructions here to fix the problem: error: "unable to start correctly (0Xc000007b)"

• The 193 Win32 API error ("(erreur inconnue)" ") when you call: load getCfunction librabry

  I get this error when I try to open the ambient light.

  I am able to use photoshop, but not the ambient light.

  According to the notes, they followed the instructions here to fix the problem: error: "unable to start correctly (0Xc000007b)"

  It worked

• Advanced Security manager-error initializing the Essbase API.

  Hello

  I installed OLAPUnderground > Security Manager Advanced for the export of all the safety of the user.  When I try to click connect he throws a connection error 'error of initialization of the Essbase API, unable to connect'. Someone knows this error before? Please let me know if I'm missing something.

  We currently use 11.1.2.3.500.

  Thank you

  Karim
  

  It seems that you did not create the windows environment variable:

  ESSBASEPATH

  D:\Oracle\Middleware\EPMSystem11R1\common\EssbaseRTC\11.1.2.0

  It's just an example path update to match your environment

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Customization of the OFA: could not export any Document error

  Hello
  I am trying to export my customization of test for prod but I get the below error when I export the test files
  After you select the files and click on the "Export to File System" button, I get the error below...
  
  Exported documents.
  
  Could not export any Document.
  Error when exporting as a result of the files:
  / Oracle/Apps/IRC/candidateSearch/WebUI/customizations/site/0/CmAplSrchQueryRN
  / Oracle/Apps/IRC/candidateSearch/WebUI/customizations/site/0/CmCandSrchCritDumRN
  / Oracle/Apps/IRC/candidateSearch/WebUI/customizations/Function/IRC_CM_APL_SEARCH_PAGE/CmAplSrchQueryRN
  / Oracle/Apps/IRC/candidateSearch/WebUI/customizations/Function/IRC_CM_PERSON_SEARCH/CmPersonSrchQueryRN
  / Oracle/Apps/IRC/candidateSearch/WebUI/customizations/site/0/CmPersonSrchQueryRN
  / Oracle/Apps/IRC/candidateSearch/WebUI/customizations/Function/IRC_CM_CANDIDATE_SEARCH/CmCandSrchCritDumRN
  
  
  any ideas why?
  Thank you

  Hello

  Customizing filed you any test in a PROD directory (where the DNF: Customizing Document Root Path / FND_PERZ_DOC_ROOT_PATH)
  Use this profile option to set the root path where documents of customizations are exported to or imported from)

  And then you try to import in the PROD?

  Thank you.

  With respect,
  Kali.
  OSSi.