Export the virtual network settings

Similar Questions

• Easy way to export and restore the virtual network editor in 10 workstation

  I'm looking for an easy way back up and restore my settings of the virtual network Editor. I use Workstation 10.0.3 on Windows 7 64 bit and have several networks configured on different host machines. After Googling for the problem, I found the following:

  -on a Linux host, the settings are stored in/etc/vmware/networking. However, I am not able to find the file in Windows. Source: http://serverfault.com/questions/535193/vmware-workstation-how-to-automate-or-script-changes-to-the-virtual-network-co

  -on a Windows host, all parameters could be saved through export of certain keys in the registry. But these keys are at least partially unique on each host, and it would be a real pain to get the keys on each host individually. Source: Re: VMware WS configuration backup

  -vnetlib control should support a statement "-export" which creates a text file containing the necessary information. However if I try to run the command, as described in the link, no file is created on my machine. The command must be ' start/wait vnetlib.exe - export path_to_file' (I am running this command of in the workplace, of course installation directory). I also tried "vnetlib" - path_to_file to export, but that did not help either. I know that vnetlib works because I reinstalled successfully the vmx86 with vnetlib service - install. If also tried the vnetlib64.exe, but no luck. Source: Re: virtual network editor

  So is - someone of you knows how to solve my problem? I'm looking for a way to write a simple batch script that exports the settings without having to deal with the registry. My virtual network Editor loses its configuration from time to time and I don't want to set up everything by hand again.

  Thanks in advance.

  The instructions on my site still fit for WS 11
  sanbarrow.com ~ Index

  on a 64-bit host export settings like this
  "C:\Program Files (x 86) \VMware\VMware" _-_ export f:\ws-networkbackup.txt
  Note the syntax:
  _ should be a space
  -is not a unique dashboard but 2 x less

  You can import this backup again if you replace import export.
  Use a commandprompt with high fees - (run as admin)

  The settings for the vmnetbridge service are stored in HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\services\VMnetBridge

  The VMware DHCP written in
  HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\services\VMnetDHCP

  The NAT service written in
  HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\services\VMware NAT Service

  The vmnetuserif service is required, but there is nothing to configure
  HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\services\VMnetuserif

  There are also the vmnetadapterservice but there is nothing to configure

  HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\services\VMnetAdapter

  Less important entries go to
  \VMnetLib HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\VMware, Inc.

  Also note for DHCP and NAT conf files:

  netmap.conf

  vmnetdhcp.conf

  vmnetdhcp. Leases

  vmnetdhcp. Leases ~

  vmnetnat - mac.txt

  vmnetnat.conf
  They can be found in C:\ProgramData\VMware

  For your reference, I have attached a dump of vnetlib64.exe and the registry for the service vmnetbridge

  Ulli

• Impossible to change or remove networks in the virtual network Editor?

  Hi people,

  I try to change the address of Vmnet1 network IP subnet and remove Vmnet2.

  The settings are changed correctly once I apply, but go back to the time when I reopen the virtual network Editor.

  I tried to run 10 Workstation as an administrator and even a default restore does not remove Vmnet2.

  Anyone know what I'm missing?  Driving me crazy!

  Thank you

  romatlo

  

  Hey just to be clear, I was referring to the virtual network editor shortcut or shortcut VMware Workstation no or vmware.exe vmnetcfg.exe!   Are we on the same page?

• "LAN Segment" option missing in the virtual network Editor

  I regularly use isolated networks to test things. With the help of my own DHCP / DNS /... Server for 'infrastructure'

  In 9.0.2 workstation there is an option "local network Segments. Miss me this option in 2013 of the workstation.

  Why this option has been removed? Or was it an oversight? Or should I add something to my configuration?

  Never mind.

  'LAN Segments' option is not displayed in the network Editor, but it IS displayed on the virtual network adapter settings page.

  I'm sorry.

• Need help to choose the correct setting in the virtual network Editor

  This is my first time using machines virtual period. What I do is implementing a laboratory MCSE to follow certain CBT courses, I bought. I created a team of three virtual machines - two of them that are running WIndows Server 2003 and the other WIndows XP. The lab wants to use the following TCP/IP parameters for the three machines (Server1, Server11 and XP1)

  Server1:

  192.168 1,201

  255.255.255.0

  192.168.1.254

  11 server: 192.168.1.211 (same gateway and subnet as Server1)

  XP1: 192.168.1.1 (ditto for the door and the subnet as Server1)

  Primary DNS is set to 192.168.1.201 (Server1 is DNS server).

  Default VMWorkstation allowed me to ping both servers very well without any additional configuration. My problem is when I try to fix the DNS redirector on Server1. Any DNS server IP address that I plug in I could not get my XP box to get out of the Internet. I know it's a problem with my virtual network settings, I'm sure. Problem is I don't know where to start. Can someone point me in the right direction?

  Thank you!

  General things:

  You cannot use the IP address ranges which are used somewhere else, and that the host might be able to see.

  Type ' ipconfig/all' on the host and the glance to the adapter VMnet8. Suppose you see a 192.168.30.1 there. This means that your network VMnet8 address is 192.168.30.0/24 (24 =, displayed subnet mask as 255.255.255.0).

  Your DNS and gateway for virtual systems would be 192.168.30.2.

  You can check this in the editor of virtual network on the NAT tab.

  To change the range of network addresses VMnet8 you must use the virtual network Editor.

  1. go on 'host Virtual Network Mapping.

  2. click on the ">" beside VMnet8 and choose "subnet".

  3. change address you need. It's the network address, so the last digit (in your case!) should be 0. The address range should not be used elsewhere (physical network, VMnet1).

  4. click on 'apply '.

  5. When you click on the ">" again and choose DHCP or NAT you can see that all addresses have been changed accordingly.

  When you enter ' ipconfig/all' to the host, you will see that the VMnet8 host adapter has an IP address of your selected range with 1 node address (e.g. 192.168.1.1).

  The gateway and the DNS so its node address + 1 (192.168.1.2).

  If you found this information useful, please consider awarding points to 'Correct' or 'Useful' responses Thank you!!

  AWo

  VCP / vEXPERT 2009

• In the Internet properties and connections and the local network settings, I uncheck the box for a proxy server, but in a few moments, the computer checks the box

  In the Internet properties and connections and the local network settings, I uncheck the box for a proxy server (because it is blocking my access to Internet Explorer), but within moments, the computer checks the box. What can I do to stop the area of the check proxy server box?

  original title: LAN settings

  Have you checked for viruses?

  http://www.eset.com/us/online-scanner/

  It is very common that the virus to do.

• How to change the local IP on the virtual NETWORK adapter for Web server address

  Hi all

  I have a physical Windows system, on which I run VMware Workstation 9. Now on VMware I run Ubuntu 12.10 a LAMP for a Web server.
  Problem:
  Now, my local IP address for my NETWORK card virtual (using the Ubuntu one) at the address 192.168.159.7 and my router only emits the 10.0.0.x range IP addresses. So if I want to port forward to the virtual NETWORK adapter that has a 192.168 address, I can't, so my LAMP Web server are not accessible to the outside because the router does not send packets on port 80 to the virtual card... How to fix this?
  The only way I guess that is to be assigned an ip address of 10.0.0.x to the virtual NETWORK adapter?
  But how do I do this?
  I tried to do it on the host from the Windows machine with "get my IP address automatically", but she emits an 192.168 address every time...
  Thank you

  Welcome to the community,

  I guess that the virtual computer is currently configured to "NAT" or "Host-Only' networking! That would explain the 192.168.x.x IP address.

  There are 2 options to be able to access the web server on the virtual computer.

  1. with "NAT" network configured

  In this case forward port 80 to the IP address of the host and configure the port forwarding on the virtual computer in the "Virtual Network Editor. This way you can leave the IP address on the private network of 192 (if it is currently set to NAT)

  2. use "Bridged" network layout

  Reconfigure the virtual NETWORK adapter to the machine virtual networking "Bridged" within the parameters of the virtual machine, assign an IP address from your router network (10.x.x.x) and do the port forwarding on the router directly to the IP address of the virtual machine.

  André

• Can not see the physical adapters in the virtual network Editor

  I installed VMware Server 2.0 on my computer running Windows 7 64-bit edition Home premium.  I'm trying to make sure that the network card virtual vmnet0 only connects to my thread of material gigabit NIC, not my wireless card.  I went into the virtual network editor and none of my physical computer network cards are listed.  The bridge networks tab the checkbox next to automatically connect to the network device is checked and grayed out.  Any ideas on why my physical network cards are not listed.  Thank you.

  Hello

  Are you running virtual network editor with "RunAs as Administrator"?

• The virtual NETWORK card MAC address is editable in ESXi?

  Is it possible to put the address MAC of the virtual NETWORK adapter to a custom value instead of let the hypervisor generate the MAC address for each NETWORK adapter in each computer running under ESXi virtual? I know that this is possible in workstation, server, Fusion, etc.

  Hello.

  Discover KB 507.

  Good luck!

• Impossible to locate or select network adapters in the virtual network editor - W2K8 host

  I am running VMware 2.0.1 on a W2K8 64-bit host (with the windows firewall is disabled for now). VM images are all able to start and use the network bridged the host connection. I can access these images of virtual computer on the network, and even each image virtual machine running on that host computer has access to the public network.

  My problem is that I have three network adapters available on the host, but I can't individually select one of them in the virtual network Editor. The "Automatic gateways" checkbox is grayed, outside, tab automatic bypass, and if I try to select an adapter to exclude none appear in the dialog 'Add adapters excluded' that opens. In the virtual network mapping tab VMnet0 host, is set to be filled to an automatically chosen adapter and VMnet1 & 8 are configured to use their default VMware network cards. If I open the selections from drop down menu to one of the network adapter 10 VMnets listed in the virtual network mapping tab host there is no available alternative.

  Note: three network cards available on my W2K8 host server, one of them is a fault tolerant team consisting of two individual adapters and two other network cards are not associated. The team of the adapter has a network on our local network connection, but the other two adapters are connected to a private network. The fact that the images of the virtual machine running on that host are available on the network and be able to use the network indicates to me that my VMnet0 connection automatically open is finding and using the adapters together somehow (Luckily, by design?).

  I installed VMware 1.X and 2.0 on many host W2K3 servers and never encountered this problem before.

  If Win2008 follows a similar to Vista security model, then you must run AS administrator virtual network Editor.  Otherwise, you cannot make changes selections.

• Error message: «the virtual network on the host computer drivers are incompatible...» »

  Just bought a new computer that is running Windows Vista Ultimate 64-bit.

  I installed VMWare Workstation 6.5.1 build 126130.

  I copied on a machine virtual from the old computer (running Windows XP Pro and VMWare Workstation 5.0.0 build 13124). I improved this VM Workstation 6.5. This virtual machine is currently running Windows XP Pro.

  When I run the virtual machine on the new computer, I get the following error message:

  "The virtual network on the host computer drivers are incompatible with the installed application of VMWare. Version expected 5. Please reinstall the product. Virtual device Ethernet0 will start disconnected. »

  Note that the virtual machine runs; I don't have any network capacity.

  I read the thread http://communities.vmware.com/thread/186731, who seems to have the same problem. He had installed 6.5 on 5.5; When he uninstalled and deleted all of the directories, and then reinstalled everything went well.

  I don't have any product VMware existing on the computer that would cause this type of conflict.

  So, what should I try to fix this?

  Thank you

  Wayne

  If you want to install only vmnetadapter, open cmd as admin in vmware workstation dir and run;

  "rundll32 setupapi, InstallHinfSection VMnetAdapter1.Install 128% CD%\netadapter.inf"

  You can also repeat for vmnetadapter8.

  If it does not run as above

  "vnetlib - install devices.

  Joakim

• Web client to modify the virtual machine settings

  We have several VMware environments that I help manage. So that we can train the junior members on the use of VMware, we have a few stand-alone hosts running v5.5u1.

  One of my colleagues copied a VM built with 10 Workstation to this host and received an error message on the VMDK becoming invalid. They tried to solve the problem by getting the host to upgrade the virtual machine. The virtual machine appears now as being "Version VM: vmx-10.

  The network for this virtual computer is set on connects don't not to put under tension, so we have no network on this virtual machine. If we right-click the virtual machine in vSphere Client and choose change settings, we receive this message:

  "You cannot use vSphere Client to change the settings of the virtual version 10 or higher machines.

  
  

  Use the vSphere Client Web to change the settings for this virtual machine".

  I know that the Web Client for stand-alone hosts was not available on 5.1 and I guess that's the same thing with 5.5. Is this correct? My attempts to try to load a page like this fails.

  Y at - there a command I can use 'downgrade' the version of virtual machine to any where I can change the settings with vSphere Client?

  It's not much you can do that and then get stuck without being able to change the settings for the virtual machine. Surely, they could detect if the host is connected to a vCenter and only enable this option if it is... or warn before you perform the upgrade!

  Thank you

  Neil

  You can simply edit the vmx file and edit vmx - 10-vmx - 9.

  Linjo

• Computer for the connectiion network settings

  I have a problem with my laptop to connect to the internet. When I go to connect to a network, my home network have a red X on it and the message says that "settings saved on the computer for the network do not match the requirements of the network. I think that someone clicked on something here while trying to connect to a network. How can I fix it? Thank you

  Hello NETTE101002,

  To add to what Al Jarvi said, I suggest that you turn off any wireless security feature. Please, click on start-> Control Panel, double-click network connections, right-click on the wireless adapter and select Properties. From there choose wireless networks, click the name of your wireless network and choose Properties. Under network authentication, select open to disable wireless security. Please try to connect.

  If the problem persists, I suggest that you remove the connection and re-create the wireless network connections. The following Web site can help you on the creation of the wireless connection.

  Here is an article that will give you steps on how to create a network connection:

  http://TechNet.Microsoft.com/en-us/library/bb878035.aspx

  Alternatively, you can try to reset the settings of the default router. You must contact the manufacturer of the router to do this.

  You can also check the links in the following article:

  Set up a security key for a wireless network:
  http://windowshelp.Microsoft.com/Windows/en-us/help/044ee3ed-AB72-48c7-9515-95d56f925fcb1033.mspx

  What are the different wireless network security methods?
  http://windowshelp.Microsoft.com/Windows/en-us/help/b385cc8a-AF25-489e-a82e-decf6df26b681033.mspx#EZB

  Set up a wireless network:

  http://windowshelp.Microsoft.com/Windows/en-us/help/297fa2dc-B20B-4327-B673-707a968c86801033.mspx#EK

  If it does not work.

  Remove the driver for the card
  ========================

  1. click on start. In the start search box type "devmgmt.msc", and then press ENTER.
  2. expand "Network adapters", double-click the entry for the wireless network device.
  3. click on the "Driver" tab, click "Uninstall".
  4. click on start. In the start search box type "appwiz.cpl", and then press ENTER.
  5 remove the entries related to the wireless network adapter.

  Reinstall the driver with your driver CD. After installation, create the connection.

  Try these steps and let us know if it works.
  Thank you

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Config to export the Virtual Appliance

  Hi people,

  I'm trying to set up a virtual WSA as a test of the WSA.

  Is it possible for me to export my custom and political access to the new categories is GOING?

  I don't have a device of management but I can't manage the GOES with it.  If I can export the configuration, can I run the VA unit of MGMT, push the config and unmanage can it?

  Thank you

  Assuming that the virtual machine and the others had is the same version, you can save the configuration and upload it to the virtual machine.

  And Yes, you can manage/push/unmanage the VM as a WSA material.

• Failed to export the virtual machine. Help please is urgent!

  Hello guys! I need your help.

  I tried to export a virtual machine in the .ova file but I got this error.

  

  So to start export didn t and it showed only in the taskbar without effect 'in progress'. Does anyone know how can I solved this problem?

  I would appreciate your help.

  It looks like an ISO image is configured for the virtual CD drive of the virtual machine. I suggest that you set the CD for 'Client' and check that 'Connected' is NOT checked.

  André