ExpressCache broken after update hard drive Protection

I have a brand new E530 with 16 GB SSD. Product Code: 3259A 29.

I installed the ExpressCache with the C:\SWTOOLS\APPS\ExpressCache installation program. Everything went well and the thing ran faster, for a day.

Now I have updated the Protection of hard drive, such as recommended by the ThinkVantage System Update to Version 1.77.0.5.

Since then, I get an error message during startup: "2102: error detection on HDD2 (SATA Mini).» Press ESC to continue. "After ESC the machine starts.

But ExpressCache doesn't work anymore. On the command line the command eccmd.exe - info says "* ERROR * ECCmd required peripheral is not available: 2

I guess, the update of the ruined the ExpressCache HD-protection - hide.

How can I fix ExxpressCache? All eccmd.exe options, it returns the error message above.

Thanks for your help!

awehring,

You see the error message:

«2102: error detection on HDD2 (SATA Mini).» Press ESC to continue. »

is from the BIOS.  You say that the mSATA SSD (or the port that it attached) is bad.

I recommend you call the support phone number in your country to apply for warranty repair.

The update of the software APS could not cause this, given that the APS software runs only under Windows.  You see the error message is BIOS.  I think it is purely a coincidence that HW failure is apparently happened as you updated the software of the APS.

Tags: ThinkPad Notebooks

Similar Questions

  • Satellite 1410 714 extremely slow after replacing HARD drive

    Hello

    I have a Satellite 1410-714 which has had a hard drive failure. I replaced the drive, but now the computer is extremely slow. Windows has been reinstalled, it was really slow too much and now it takes minutes for windows to start.

    I suspect that something might have broken on the motherboard and the hard disk. I checked mobo replacement parts, but have not found anything for-714, so a 1410 mobo compatible? This model has a processor celeron 1.8.

    Thanks for help.

    Hannu

    Hello

    I can t think the motherboard is broken after replacing HARD drive.
    I suggest updating the BIOS first. Maybe your old BIOS have a few problems with the most recent HARD drive.
    Please check site driver Toshiba for the latest version of BIOS.

    Have you used any anties Virus applications?

  • Satellite L300 - cannot install Microsoft updates after replacing HARD drive

    I am repairing a Satellite L300, which had a dead HARD drive. I replaced death 160 GB of HDD with a 500 GB WD, then used the recovery disks to install Windows Vista SP1 at the exit of the State of the box.

    Now, Windows update does not work, won't install autonomous not of Vista SP2 I downloaded, MS Security Essentials moved there also.
    Then I borrowed a 160 GB of work and went through the same process and everything works fine.

    To make it work with a 160 GB HARD drive, but not a 500 GB HARD drive. Why?

    > ... Standalone Vista SP2 I downloaded will not be installed
    Usually after installing recovery image, you have just to connect laptop to internet and after a short period of time, you will get messages about available Windows updates. Just install the offered updates process automatic Waterer and install important updates only.

    Let the system to install all the updates and don t force the installation of some own downloaded stuff.
    Last month I've updated HARD drive (320 GB I think) and installed Win7 on friends L300 and I didn't noticed any problem here.

  • After the hard drive failed, I changed my computer and reinstalled LR5. I've updated LR5 a few weeks before my computer crashed, so for you my serial number is up-to-date. After having read a few tutorials, I suspect this deactivation were not made before

    After the hard drive failed, I changed my computer and reinstalled LR5. I've updated LR5 a few weeks before my computer crashed, so for you my serial number is up-to-date. After reading some tutorials, I'm suspecting this disabling was not made before reinstalling... Recommendations on resettlement in this case?

    You actually have a renewal LR5 problem or ask yourself what you need to do?

    Download and install the update LR 5.6 from here: http://www.adobe.com/downloads/updates

    Enter your LR 5 serial number and you should be ready.  If something doesn't work, then, please describe the problem in detail.

  • After replacing hard drive and reinstall Windows, DVD Player cannot play a Blu - ray disc.

    Original title: dvd player

    recently replaced HDD and reintegrated windows 7.  Now my dvd player cannot play a bluray disc.  Any ideas how to solve this problem?

    Duplicate the content of the thread:

    After replacing hard drive and reinstall Windows, DVD Player cannot play a Blu - ray disc

    My hard drive recently broken and we replaced and reinstalled windows7.  Now I'm watching a Bluray DVD and the drive will not read it.  I tried the fix auto and that said they detected a problem but can not fix this.  Any ideas?

    Hello

    You can check these links and try...

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

    http://support.Microsoft.com/kb/982116

  • Error message "" serial number entered is valid, but calling it a product irritate lies on this computer "appears." Cannot reinstall CS5.5 on my macbook pro after that hard drive crashed and was replaced.

    Error msg "the serial number you entered is valid, but cannot find a product calling on this computer" appears. Impossible to reinstall CS5.5 on Macbook pro after the hard drive crashed and was changed.

    Hello

    Thank you for your response. I've finally managed to connect with a support staff through the online chat portal & advises him to download CS3 web premium. Tried to find it, but this option is not available in scrolling to the bottom of the box. Ultimately, the staff had to help me to unlock the CS5.5 update manually from its end. He indicated that, in my case, the situation could not be resolved through this method, and I'd still have to contact support via the portal chat staff to help unlock my CS5.5 If this problem occur again should I need to reinstall it on a new computer laptop.

  • Satellite U840 - how do I reinstall Win 7 after replacing HARD drive

    I had a HARD drive error.

    So I formatted the hard drive (after trying for months to get the process to finally finish that)
    Now, I a U840 Satellite with a clean HARD drive and do not have the installation for Windows 7 discs.

    I searched the net and found nothing of use!
    Help, please

    see you soon
    Nick

    Hello

    You need to create the own recovery in the past disc!
    This recovery disk allows you to install the Toshiba image after the HARD drive is dead or has been replaced.

    In case you have not created this disk, it is possible to order this support:
    http://backupmedia.Toshiba.EU/landing.aspx

  • Cannot find HARD drive protection service

    Hello

    I have the Satellite pro 200 u. I instaled the new system (windows xp professional service pack 3). OK, I installed most of the tools and utillities and all work, but I have a problem with the HARD drive protection. I start out by the system. When I try to open or open the settings window appears and it says:

    "---------------------------
    TOSHIBA HDD Protection - definition
    ---------------------------
    HARD drive Protection service cannot find.
    ---------------------------
    Ok
    ---------------------------
    "

    What can I do?

    Hello

    > I installed most of the tools and utillities
    What tools are installed exactly?
    Toshiba tools to install first the common Modules. It of necessary for all of the other tools. Check it!

    More sure that Satellite Pro U200 is equipped with the protection of the HARD drive?

  • After a hard drive crash and recover most of my files on an external hard drive but who eventually became my only internal, because I live on an island in South America and there is virtually nobody on the island I live it can he

    After a hard drive crash and recover most of my files on an external hard drive which eventually became my only internal, but because I live on an island in South America and there's hardly anyone on the island I live who can help other that a friend, I took a trip to Miami to visit the genius bar and they did a new install of Capitan which I don't really like by the way.  In any case, I though I had lost all my iPhoto library, but I managed to find my photos. Only now I have two libraries... the iPhoto with images from my Photos on Capitan and 8 years.  Is it possible to consolidate them in a library?  And can I still use RAW to be able to edit photos? aIso, y at - it a tutorial for the Photos?

    In the future more facts and less editorial help here

    SO now, we know all about how you feel but nothing on your system or your problem

    What version of El Captain do you have (10.11.3 is the current version with Photos 1.3)

    You cannot merge libraries without third party software - Photos of power can merge pictures libraries

    You can migrate iPhoto libraries to libraries of Photos by dragging Photos icon in the Dock

    When you first launched the Photos it has migrated the last used for Photos iPhoto library

    I hope this will help, but to get specific answers, you need to provide real information and not feelings

    LN

  • Satellite Pro 2100: How do I reinstall the OS after replacing HARD drive

    I have a Toshiba SP2100 and I want to replace the hard drive, but I don't have any recovery CD
    So, how can I put the o/s back on?

    Try to connect the external HARD drive to the computer via the USB port and try to copy all content from the internal HARD disk external HARD drive. Then you could try to insert the external HARD drive in the laptop.
    But I've never tried this procedure and don t know if it will work.

    But usually after replacing HARD drive you should boot from the Boot CD as recovery CD or the original CD of Microsoft Windows.
    After the installation of clean Windows OS, you can visit the Toshiba drivers and you can download and install the drivers of Toshiba and utilities.

  • Beats Audio Control Panel has been removed from my PC after update audio driver.

    Pavilion dv7-6052er (Windows 7 x 64). Beats Audio Control Panel has been removed from my PC after update audio driver.
    Tried to reinstall manually with 6.10.6345.0 version (http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55094.exe) and another randomly chosen by some. Nothing has worked.
    My actions:
    1. remove the driver and its software.
    2 restart the computer.
    3 Windows Installer some driver after reboot (I can't disable or cancel installation)
    4 reinstall the driver.
    5 restart my computer.
    Just after the start of Windows driver trying to implement something else (or to continue installation), but it causes an error: _Error: Error = error Undefined...
    Tried to do without step 2 - to reinstall the driver right after having been deleted - without success.
    Tried to remove the driver and then restore an old via Recovery Manager - Beats audio control panel is displayed but there is no sound at all!
    I think I tried all possible combinations of actions. Beats Audio Control Panel works without noise and noise without BACP. But never together.
    Please help me with some advice. Thank you.

    Hey guys! Tried once more to remove the driver and install it with the Recovery Manager. Don't know how, but this time it worked.

    In fact I've disappointed with HP updates, won't be tester for you. I'm tired of these bugs after updates (utility Cool sense, Beats Audio etc.).

    Turn off automatic updates on my PC, seems I don't need your "improvements".

  • HP ProtectSmart hard drive protection

    Hey guys,.

    So the story is, I bought a HP Pavilion dv6-6b07tx Entertainment Notebook 2nd hand and quickly got fed up with the slow loading with the 5400 RPM HARD drive time... I upgraded to a 250 GB SSD HARD drive and Windows 8.1 at the same time (super fast loading times now), I now get the error ACPI\HPQ0004 dreaded in the Device Manager. I get that it's the stuff of HP ProtectSmart and found where to find the driver for it, but do I need? What is doing? Can I just leave it like that?

    At soon knightwolf153

    That error is for the ACPI/HPQ0004 unknown devicefor spinner traditional hard drives.

    HP ProtectSmart hard drive Protection software protects the hard drive of "parking the heads ' if the laptop fell accidentally, or is suddenly hit by another object.

    You now have an installed electronic reader so that you can ignore the error message. Your drive has no head to the Park. If the error message really bothers you, then you can install the Hard Drive Protection HP ProtectSmart software.

  • HP Pavilion 17: mouse pad does not work after replacing hard drive

    Hello

    After replacing hard drive and installing windows 8.1, I can't use my mouse pad.

    I installed the Synaptics driver but it didn't help.

    How can I check that mousepad device is not damaged when replacing the hard drive and which also can I try to fix the mouse pad?

    USB mouse works fine.

    See you soon

    The only way to be sure is to open it up and see if the touchpad cable was disconnected during the upgrade of the hard drive. That's my bet. Easy to forget when you're winding. You don't provide complete model number, but many of the recent models Pavilion 17 require removal of the cover together to get hard disk that requires disconnection of the touchpad cable.

  • How can I retrieve my files from the clouds after my hard drive has crashed - files were not deleted.

    How can I retrieve my files from the clouds after my hard drive has crashed - files were not deleted.

    Don't know what your problem is - log on to Skydrive and recover the files that you need them, or download the app to Skydrive and they will all be uploaded at the same time.

  • How can I keep genuine win 7 in my laptop lenovo after formatting hard drive?

    How can I keep genuine win 7 in my laptop lenovo after formatting hard drive?

    Have you tried to restart by phone?

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

    Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
    http://go.Microsoft.com/fwlink/?LinkId=52012

Maybe you are looking for