ExpressCard 54 with slot 34

Similar Questions

• How to connect the signal of C++ with slot QML?

  {Of connections

  target: Foo //object in c ++ side

  onMySignal: {/ / slot in qml side}

  ......

  }

  }

  It can connect mySignal of Foo in C++ with slot onMySignal in QML.

  Is there some replacement for above cascading?

  Please use the forum search before posting new questions.  In this case you would probably find this thread, at least: http://supportforums.blackberry.com/t5/Cascades-Development/QML-Connections-Element/m-p/1787071#M664

• 3G modem internal with slot for Satellite A500-12W SIM?

  I join this forumn in great frustration because I spent hours online looking for an answer.

  I run a Satellite A500-12W with a USB 3G modem, but I do not have this fragile thing that comes out of the computer and occupying one of the only 3 USB ports. Under the battery, there is a slot that says SIM, but it seems to be empty, because it cannot contain a SIM in place.

  I don't have a 3g internal modem, I have WIFI capabilities.
  Surely, it must be possible to buy a card that goes inside and works the same way as a USB modem?

  There is an empty slot next locations of memory which says 3 G/TV and something else, is that place and in that case, what should I buy?

  I am eternally grateful for any help, it frustrates me a lot. Thanks in advance.

  Sweden ColorBlend

  Hello

  Satellite A500-12W does not support the 3G modem and was not equipped with an ability to use the sim card in order to connect to the internet.

  The point is that there are different A500 in the market with different hardware configurations.
  Perhaps the same notebook chassis has been used and, therefore, you can see this place to a sim card.

  However, I'm not sure if you will be able to update this device with a mini-PCI 3 G map... If something like that would be possible, so you can order this part of premises Toshiba ASP...

• I have an expresscard (aka PCIe) slot but don't know where it is!

  I have a hp Pavilion dv7-6c95dx

  I want to improve my graphics through this card using a technique online and I need a PCIe for it but I have no idea where it so please help me and put a photo if possible, or give me a reasonable discription hence it is or if I did not say.

  Yes but all the Pci-e is not created equal. Location of the laptop ExpressCard is equivalent to the pci-e card 2 x on a motherboard of desktop... i. e a low short at the bottom of the motherboard. Video cards go into the long pci-e bus usually 8 x or 16 x. A location ExpressCard laptop has no connection with the screen so there is no way to put a video card in there who will work with the laptop's built-in display. They do expresscard, video cards, but they were subject to an external monitor only and are generally not better integrated graphics card laptop... just useful for adding additional screens.

• Connection signal of C++ with slot QML

  Before ask you, I searched for answers to this question, but I have not found a satisfactory example.

  I have set up a service network in C++ that performs queries to REST against a backend. An example query would be to download a given element, the id of the item.

  Once the item is extracted, I emit a signal such as:

  itemReceived(QString& itemId, QString& item);
  

  My question is how can I wire this signal to the slot in a QML page so that the status of the answer? I tried to connect the signal on the Qml in C++ slot, as follows:

  QmlDocument *qml = QmlDocument::create("asset:///main.qml").parent(this);
  QObject::connect(this->networkingService,
                       SIGNAL(itemReceived(QString&, QString&)),
                       qml, SLOT(onItemReceived(QString&, QString&));
  

  With a correspondent QML "slot" like this:

      function onItemReceived(x, y) {
          console.log("*********************");
          console.log("Item Received!");
          console.log("*********************");
      }
  

  But it does not work. I also tried using the element of connection of the QtQuick lib, but this also fails.

  Any help would be greatly appreciated. Even if he were to propose a better architecture for the "path of the cascades. Thank you!

  In C++:
  QmlDocument * qml = QmlDocument::create("asset:///main.qml").parent(this);
  QML-> setContextProperty ("_app", this);

  In QML:
  {Page}
  onCreationCompleted: {}
  _APP.itemReceived.connect (onItemReceived)
  }

  function onItemReceived (x, y) {}
  Console.log("***");
  Console.log ("point received!");
  Console.log("***");
  }

  // ...
  }

• Connection of signals in C++ with slot in QML

  In my app.cpp class

  (1) I said a signal named 'activityStopSignal '.

  (2) in this class that I charge a qml file

  Here's my class c ++

  #ifndef ApplicationUI_HPP_
  #define ApplicationUI_HPP_
  #include 
  #include
  #include 
  
  #include 
  #include 
  #include 
  
  using namespace bb::data;
  using namespace bb::cascades;
  
  namespace bb
      {
          namespace cascades
              {
                  class Application;
                  class SqlConnection;
                  class ListView;
              }
      }
  
  class ApplicationUI : public QObject
  {
      Q_OBJECT
  public:
      ApplicationUI(bb::cascades::Application *app);
      virtual ~ApplicationUI() {}
  
     signals :
          void activityStopSignal(); ///here I have defined the signal
  
  private slots:
     void replyFinished(QNetworkReply* netReply);
  
  private:
      void Initialise();
      bb::data::SqlConnection* m_sqlConnection;
      bb::cascades::AbstractPane *rootLoginEng;
  };
  
  #endif /* ApplicationUI_HPP_ */
  

  In this qml file

  (1) I set the location for the signal "activityStopSignal".

  (2) I gave the link with the signal and slot

  Here is my qml file

  import bb.cascades 1.0
  
  Page {
      Container {
          layout: DockLayout {
  
          }
  
          Container {
              layout: DockLayout {
  
              }
              ImageView {
                  imageSource: "asset:///images/logo.png"
              }
          }
          ActivityIndicator {
              id: activity
          }
  
      }
  
      onCreationCompleted:
      {
          activity.start();
          _myClass.activityStopSignal.connect(activityDone) //here i have given the connection to the signal
  
      }
  
      function activityDone() {
          activity.stop();
          _myClass.loadHomePage();
      }
  
  }
  

  Now my problem is:

  When I try to call 'make activityStopSignal' the application crashes. Where Iam wrong please help me

  Here is the app.cpp file where Ian trying to broadcast the signal

  // Default empty project template
  #include "applicationui.hpp"
  #include 
  #include 
  #include 
  #include 
  
  using namespace bb::cascades;
  using namespace bb::system;
  using namespace bb::data;
  
  ApplicationUI::ApplicationUI(bb::cascades::Application *app)
  : QObject(app)
  {
        Initialise();
        QmlDocument *qml = QmlDocument::create("asset:///splashScreen.qml").parent(this);
        qml->setContextProperty("_myClass", this);
        AbstractPane *root = qml->createRootObject();
        app->setScene(root);
  
        postJsonRequests();
        emit activityStopSignal(); //here I emit the signal
  }
  

  Someone help me please

  the connection of the signal seems ok, I would say you delete the code in your function and use a simple console.log to see if she is called correctly.

  If you want to process the request json first before emitting the signal you should check your code, networking is async your postJsonRequest will probably return before the end of networking.

• Help with slot

  I have a Latitude E6540. On the right side above the CD (half size and forward) an opening which takes in charge kind of click in, click on accessory output.  Can someone tell me what we call who's there and what can go inside?

  I tried to look and found elements such as PCI, WWLAN etc. But when I want to look at it to find things that would go into the slot, they looked nothing like the slot accepts.

  I hope that this can be used for some type of flash card or disc support.

  Thank you

  If it was CBS, an expresscard - an accessible outside express card slot.  You can install any standard express card into the slot - card firewire, USB card, etc.

• Problem with slots Usb not work after installing Windows 7

  Hi all

  I just had a guy fix my brand new computer, after that it was abandoned due to an accident than an anne 5. I told him that I wanted Windows 7 installed on the computer instead of 8. He did and got it all and running, no seven complaints only 1 usb slot works now and don't rest. Question is how can I solve this problem? I tried unistalling and reinstalled it a nothing still.

  Want HP dv7-7230us

  Product #: c2n66ua #aba

  Possible the AMD Chipset is required - includes the drivers for the USB 3.0 ports:

  http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2

• Problem with slot onTouch in ImageView.

  When I do a count function to get the number of times a photo is affected.

  But when I touch picture just 1 time, but the show 2 function.

  I don't know what is happening. Help, please.

  Thank you.

  You can try this please? (in QML)

  onTouch: {
    if (event.isDown()) {
      // ...
    }
  }
  

  Here is a list of all key events:

  https://developer.BlackBerry.com/Cascades/reference/bb__cascades__touchevent.html#IsDown

  Slot machines and Q_INVOKABLE functions can be called from QML.

• Problems with slot-shaped table and set the values of column

  Hello
  
  I have a problem with a tabular presentation.
  
  I have two tables
  
  P_detail and table v_master
  
  columns of v_master:
  v_id
  v_Name
  v_info
  
  columns of p_detail:
  P_ID
  p_master_fk
  p_name
  p_info
  
  I want to have a tabular presentation where I can store permanent data retail values. That's why I want to keep the default main column join the detail columns.
  In SQL, I can do this with an outer join:
  
  SELECT m.v_name, d.p_master_fk, d.p_name, d.p_info
  OF v_master, p_detail
  WHERE v_id = p_master_fk (+)
  
  I get the lines that exist for the master data and can add values for the columns of detail. I removed the "add lines" because that makes no sense, because the amount lines are already offered at the opening of the tabular presentation.
  
  Now, I want to get/save the v_id (main table) in the p_master_fk column value
  
  How can I do this?
  
  Thank you and best regards,
  Matthias

  Hello

  One approach is to use a database instead trigger. If you define a database view using the query:

  SELECT m.v_id, m.v_name, d.p_id, d.p_master_fk, d.p_name, d.p_info
  OF v_master m, p_detail d
  WHERE v_id = p_master_fk (+)

  Then, create a trigger on the view that will insert in the detail table if d.p_id is null and update the secondary table if d.p_id is not null instead.

  The Apex tabular form is then based on the view (with identifiers like hidden columns) and all treatments multirow Apex should work without modification.

  Rod West

• MXI-Express in an expansion slot ExpressCard from NVIDIA does not.

  I'm trying to get a DELL Latitude E6400 to connect to the controller of the PXI-8360. I use Windows 7 64-bit. I think that the problem may be that my DELL's ExpressCard slot is actually an expansion of NVIDIA ExpressCard slot and therefore not directly controlled by the BIOS (I guess). I use 8.6.1f1 of LabVIEW with as much current as I can find, especially MAX 4.6.2 and the PXI Platform Service 2.5.3 and Nov09 of device drivers. I have searched through the forums and tried solutions as much as I can find. The DELL BIOS upgrade A19, I tried the compatibility software BIOS MXI-Express 1.2 but I can't install it because the installer complains that my system is not 32-bit. I'm about to update the NVIDIA driver but I have my doubts about this work. My suspicion is that because housing ExpressCard is a slot on the NVIDIA card it will be difficult, if not impossible, to find a workaround.

  Any thoughts?

  If there is only 1 bridge looming, the card is probably in compatibility mode, which requires a driver.

  Try plugging (ExpressCard only) on a system with the driver installed, and then run the configuration utility (all programs-> National Instruments-> MXI - Express-> Configuration card ExpressCard-8360) and disable compatibility mode.  Then, it should work in your other system.

  -Robert

• Not available on new laptops ExpressCard?

  I have a PXI-1033 and 8360 card and am looking for a new laptop, but it seems not that there?

  The ExpressCard standard is already dead?

  Can anyone recommend a new laptop which has a slot ExpressCard, tested with 8360 card?

  Preferably a laptop with a screen 15 "or smaller.

  Thanks in advance

  Talk t myself here, but it seems 2011, series Dell Latitude have ExpressCard card slots...

• Tecra 8100: memory slot problems

  I have a model tecra 8100 not: PT810L 12 c 42.

  I had problem with slot B mem, so collapsed to use it. Then I upgraded my RAM and inserted a 128 Mb TOSHIBA THLY6416G1FG-80 RAM PC100-222-620 slot A and used for a month. Then he suddenly went dead one day and did not boot at all.

  I took it to the point of service, they found somehow it work by sticking a piece of paper btw Aries and the cover. I used another week with ram cover duck taped it. Same story, then dead in the middle of winXP, switched off and no boot again. It took to the same service point, they tried some other RAM chipsets that it refused to start.

  The interesting thing is; When they inserted a faulty RAM in slot A and non-use slot B we get the message "memory incompatible chipset" on the screen. With the RAM mentioned above in the slot B (problem as always) and the A we get nothing, just a blank screen, DVD slot starts green lit, but nothing.

  WHAT SHOULD I DO, PLS HELP

  What is the RAM causing problems? What must a chipset that is exactly compatible with the model no pls?
  Is it the two locations of memory A or B, their change could solve the problem?

  This is the machine he itself, must it be thrown away?

  ANY SUGGESTIONS PLEASE

  Hello

  I n know where you tried to upgrade the memory but as Lisa suggested this was not a serious technician. I changed and upgraded memory on multiple PCs, and you must use 100% compatible modules! You shouldn't t install the modules with a brute force or use strange things as a communication between the housing and the memory module.
  Possible slots are damage due to use this procedure. But I hope you're a lucky man and everything will work correctly.

  If you n t know which modules are right and taken in charge so you should contact the service partner authorized Toshiba for the right and the upgrade modules.

  Good luck

• HP Pavilion AU113TX 15: Contains AU113TX slot M2 SSD?

  My HP Pavilion AU113TX 15 came with 2 HDD of TD and 16 GB of RAM, I wanted to know if she has the SSD M2 slot where I install SSD while keeping the built-in HARD drive as it is. Product manual available here said that the Pavilion laptops have slot M2 SSD. Thanks for the help!

  Hey there! @kushalpandya,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I understand that you need to know if there is a slot m2 on your laptop.

  I have checked the specification of your laptop and found there is no option to install M.2 SSD on your laptop.

  There are some models of portable Pavilion 15 who went with slot m2 where they have the option to install SSD m2.

  Since your laptop with SATA you don't have the possibility to opt for SSDS m2.

  Please keep me updated!

  Have a great day! :-)

• NO ExpressCard-8360 problem installing on DELL latitude D830

  Hello

  When you install an NI ExpressCard-8360 with our PXI chassis, I have problems and cannot operate.

  I followed the procedures closely, but when Windows starts, it wasn't able to install the two bridge PCI to PCI Standard PCI.  I managed to start and installed manually.  The second PCI bridge, Windows shows error Code 12 not enough for resource assigned to the device.  I tried to make it inactive a few resources in the BIOS, it did not help.  I tried to disable a driver using resources, it has not helped. I updated the BIOS of the A13 A14 version, it did not help.  I'm out of ideas.  Help!

  Please note that this laptop works very well with NI PC Card 8310 bridge with the same PXI chassis.  We have acquired the NI ExpressCard-8360 to expedite the transfer of the large data set between the chassis PXI Board A/D and the laptop.

  WOW!

  I found the solution.  I found that this knowledge base MXI-Express Setup/compatibility issues and Solutions (http://digital.ni.com/public.nsf/allkb/81CBF2F7F0BAEDBD86257330000514DF?OpenDocument) who suggested delete OR CardBus/8310 driver for solve problem Code 12.  After trying everything else, Hey! Why not try.  And it works perfectly now.

  WOW! This driver NI CardBus/8310 is a bad boy.  Please note that I didn't card Cardbus plug, the driver always keeps the PCI ExpressCard to work well.  Weird!

  Hope this discussion helps someone else.

  Eric R.