Extend the poplist VO

Similar Questions

• Impossible to extend the existing wi - fi with time capsule airport

  Hello

  I have one Capsule of airport TB 2 hung on an Ethernet in my study (lower level).

  I already have an existing wi - fi network to ISP modem/router to my media box provided at the top level.

  In addition, I have an Extender provided by the ISP of lower level.

  I would try to expand the scope of the wi - fi with my time capsule without creating an additional network.

  I tried several times to do so, but either it freezes up or creates its own network despite the

  mode bridge as stated in Airport utility.

  Guide gently with the method or Protocol correct to put that in place.

  Thank you

  Jay

  I would try to expand the scope of the wi - fi with my time capsule without creating an additional network.

  It sounds like you may try to extend the network of your "main" router wireless

  The time Capsule will not be able to extend wireless network if your 'main' router is also an Apple AirPort base station.  Or... in other words if your 'main' router is not an Apple product, then the time Capsule will not be able to extend wireless network.

  So, the first question to ask here would be... What is the number of brand and model of your router "main"?

  If you intend to leave the time Capsule connected to your main router with an Ethernet connection, the Capsule must have the maximum value of "create a wireless network.  If you use the same wireless network name and password using your 'main' router, Time Capsule will provide additional wireless coverage in the area where it is located.

• How to extend the life of my MacPro 2006 1.1?

  I'm hoping to extend the life of my 2006 MacPro1.1, whose startup disk has developed a Squeak. I have received conflicting advice from vendors on a possible solution and would like knowledgeable opinions.

  Here is a partial configuration:

  A Macintosh 500 GB HDD with 87 GB available.

  A hard disk of 1 TB with 332 GB

  A hard disk of 2 TB with 1.3 to

  I'm running OS X 10.6.8

  Is 6 GB memory

  My Time Machine backup measures about 1.8 to

  Option 1. A local store recommended I have delete the 2 TB drive and restore the backup any here, which makes my new startup disc. My concern is that there is very little free space on this drive and an already slow computer would become even slower.

  Option 2. A seller of phone encouraged me to replace my 500 GB hard drive with an SSD, which according to him would be much faster than what I have now.

  You choose Option 1 or 2, or another altogether?

  Thank you very much

  Peter

  The hard drive containing the boot the Mac volume has failed and must be replaced. An SSD is an interesting option.

• MacBook Air how to extend the timer

  I listen to a tape of meditation 1 hour and 14 minutes and it stops after an hour

  How can I extend the timer to last more then 60 minutes? It's a Mac Book Air 13

  Not sure about "Timer" you mentioned, even if your MacBook Air does not work in mode "sleep" more than 1 hour of system preferences > energy saver, and then set computer sleep more than 1 hour.

• With the help of a second domestic airport to extend the network

  I have an Airport Extreme (MD031LL/A), connected to a modem via an ethernet cable and it works perfectly as a WiFi router for my house. I have also an Airport Express (MC414LL/A) I want to use as a second router to extend the reach of the Wifi signal, which works when connected via a cable to the Airport Extreme (continuous green light), but when I unplug the ethernet cable the Airport Express falls out of the network (Amber led flashing). I've updated the router time firmwear and repowered and reset everything, including 'forget' the devices via the Airport utility which I got on my MacBook Pro, but not luck. Books Online says the network should see the second router, waiting with flashing light amber, but it does not work.

  Any suggestions?

  Please note, it is not ideal for me running extended ethernet cable, I would like to as the relay to be wireless.

  I am assuming that you are using a Mac running a current or recent operating system... or... you use the installer on an iPhone or an iPad, right?

  If you want the AirPort Express to extend wireless signal in AirPort Extreme... then you would not use an Ethernet cable to the configuration... Since the installer detects the Ethernet connection and configure the AirPort Express Terminal accordingly.

  However, if you are able to locate the Airport Express where you need more coverage... and... an Ethernet cable from the Express back to AirPort Extreme... which must remain connected permanently... This would be the way to go.  The reason is that you will lose about half of the potential speed on the entire network when you try to Express to extend the network using a wireless connection.

  But, if you can not run the cable, you can not.  If you need a little more advice on installation, after return to confirm how the Express connect to AirPort Extreme and let us know what operating system is installed on the device you will use to configure the Express.

• Miserable attempt to extend the Boot Camp partition

  Long story as short as possible - 2011 MacBook Air with SSD 256 GB internal. Originally divided 50-50 between OS X and Windows 7 using Boot Camp Assistant. Yesterday I needed more space on the bootcamp partition. I managed to make OS X smaller using the partition disk utility but Windows Disk Manager would not extend the Windows partition because the newly created free space has been before it, not after. Rather than use one of the appropriate options to move the Windows partition, I made the mistake of trying AOMEI Partition Manager to get it within Windows. Of course, 96%, it failed saying that the partition table has been locked and forced me to restart. After that, no partitions are bootable disk.

  I installed 10.11 on an external USB HDD to get the system started. In disk on the internal SSD flash disk utility, I see the Bootcamp partition always there (and can be fitted very well so it was moved successfully), but he does not see the OS X partition.

  

  Don't lose the content of the OS X partition is no big deal that I have a time machine backup, I can restore. But at this stage because the partition table is messed up, I can't reinstall OS X disk without blowing the bootcamp partition and I want to preserve as much as possible.

  In general, I am fairly computer-savvy, but completely green when it comes to partitions. I realize now that I should have followed one of the tried and true Mac-specific methods to do this. Mea Culpa!  Anyway, here is the output of the commands that I saw others provide:

  diskutil list

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 251,0 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Microsoft database BOOTCAMP 208,9 GB disk0s2

  / dev/disk1 (external, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 256.1 disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_HFS 217,3 Untitled GB disk1s2

  3: Apple_HFS disk1s3 37.8 GB model

  4: disk1s4 Apple_Boot Recovery 650.0 MB HD

  sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 30515/255/63 [490234752 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 0 0 2 - 1023 255 63 [1-4294967295] < unknown ID >

  02:00 0 0 0-0 0 0 [0-0] unused

  03:00 0 0 0-0 0 0 [0-0] unused

  04:00 0 0 0-0 0 0 [0-0] unused

  sudo TPG - v - r see the/dev/disk0

  See the TPG: / dev/disk0: mediasize = 251000193024; SectorSize = 512; blocks = 490234752

  start index size summary

  0 1 PMBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 81794965

  82204605 408026050 2 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  490230655 4064

  490234719 32 table dry GPT

  490234751 1 dry GPT header

  So it is possible to get the disk to the point where I could reinstall OS X on it without harming the existing bootcamp partition (as well as create a bootcamp partition begins once more)?

  Thanks in advance for an expert, you can provide.

  Yes. Please download GPT Fdisk to https://sourceforge.net/projects/gptfdisk/ and we can fix it. Your 2 GPT entry should be from 409640 and GPT 3 should start 82204605.

• Extend the network wireless with roaming function

  Hello

  I was looking for some advice on my project to the top. I currently have my SKY router (wifi off) connected to an older time capsule which is almost full, so I'm about to buy a new one and I can use the old one plus one new airport extreme/express to extend the network of thought. I think three points would be best as its quite a large sector, I wish to address. I would like that it either under one SSID using the roaming capabilities I've read are possible with the airports and would hand off a signal strong etc.

  Unfortunately, I don't have the option of it being fully wired but planned to use the powerline rather than wifi adapters because I don't want to lose too much speed. I use power lines now an extension of netgear and performance are pretty good with very little loss, although the multiple SSID bothers me so want to change.

  Can someone advise if the setting above would work or if there is a better way (without cabling package together) and if I would be best for extreme or the express for the 3rd point?

  If anyone has any configuration Advisor if this is the best set up then that would be also appreciated?

  Thank you very much

  Iain

  I use power lines now an extension of netgear and performance are pretty good with very little loss, although the multiple SSID bothers me so want to change.

  Configure each extension to use the exact same network name (SSID), the same level of security wireless and same password wireless. Then you will have a roaming network.

• Impossible to extend the AirPort Extreme wireless network

  I have a wireless network set up with a time Capsule airport 4th generation.  I'm trying to take my old AirPort Extreme wireless 3rd generation. I have double. Kettle has implemented, but I get the status message on the extreme that it cannot extend the network.  I can get a strong signal on my iPhone from the point that I have placed extreme itching so I'm close enough to the time Capsule.

  Could I use a connection by current bearer through my home wiring to the extreme and extend it like that?

  Does anyone have any suggestions?

  Please follow these steps closely and report on your results.

  Power off time Capsule airport.

  Wait 10 to 15 seconds

  Power up Time Capsule airport

  Reset the AirPort Extreme back to default factory

  Set up AirPort Extreme still extend wireless signal of the time Capsule

  Report on the results

• Loop slider does not appear when you move to the right of the loop; may not extend the duration of the loop; aaarrrgh.

  Have checked tutorials and help , but doesn't understand why hovering over the right angle, at the top of the track loop not give me the slider that allows me to draw on the track and extend the playback loop.

  Long kickflip is the one that gives me a problem right now, but Latin Bembe Cowbell does not work for me either!

  It is my first try at GarageBand, and maybe my last very soon.  Thanks for easy to understand help you send.

  The two loops work very well for me in GarageBand 10.1.1. Skip on the upper right corner of the audio region to display the cursor of the loop, if it is not, save your project and the test in a different project.   Restart your Mac, if you don't have already done.

  

• Satellite Pro S300 - cannot extend the desktop to an external monitor

  Hello
  I have a Satellite Pro S300 and it won't extend the desktop to an external monitor / projector, but it will clone the desktop?

  so far I have tried:
  2 instructors and 1 projector all do the same thing, will clone but not extend.
  Reinstall the latest drivers to display on the Toshiba site.
  Reinstall the latest drivers of change on the Toshiba site.

  But nothing worked, I even checked my S300 colleagues to make sure that I use the same parameters and their (of 2 other s300) extend and clone office.

  Has anyone seen this before and how solve you the problem?

  Paul

  Did you first remove the old driver before you install the new driver? If this is not the case, try to reinstall the driver again. Therefore, to remove the old driver, restart the computer, use CCleaner to clean the registry and install the new version you can find on the Toshiba site.

  More I would try updating the BIOS. You can find it on the Toshiba site too.

  I hope it works for you.

• Extend the DSL router?

  I just got internet frontier DSL, and it comes with a wireless router & modem Netgear 7550. I would use my Airport Extreme to extend the reach of wifi at the front of my house and also plug my Airport Express to print wireless, and play music. How can I do this? I don't know anything about networks. Thank you!

  Ask Frontier to replace your modem/router with just a modem, so you can use your own router. Or, if the device has an Ethernet port for the computer, and then connect an Ethernet cable between the port of the modem/router and the port of world on the AEBS. Jam the device border so that the wireless radio is turned off. You should be able to extend the AEBS wireless using your AEX to print and play music.

  Network Apple devices do not extend the networks of non-Apple routers unless you run Ethernet cables for Apple devices installed remotely.

• Way to extend the memory of the Satellite R850 Pro

  I was wondering, since I have a lot of things in my laptop; is it possible, as a card to extend the memory of my laptop?
  As I noticed a big slot inside my laptop on the lower side left, so is there something for an extension of memory, that I can do?

  any help is appreciated!

  Hello

  You want to extend the portable computer's memory or HARD drive?
  I think that in your message that you are talking about the slot slot ExpressCard or card smart (it depends on the model you have purchased)
  This slot manages the ExpressCards or smart cards

  Here is a nice Wikipedia article on Express cards:
  http://en.Wikipedia.org/wiki/ExpressCard

  There are different ExpressCard cards on the market. You can use Express of SSD or HDD Express Card cards to extend storage or you can use Express cards in order to upgrade the computer laptop with a tuner TV, 3 G or similar

• extend the time for the home screen before its judgment

  How to extend the time before my phone turns off?

  settings - touched / access code - require the access code - see if you can change it.

  If you have a job exchange account on your phone you will not be able to change it.

• Airport Express - to extend the wireless network

  Hello

  I have 1 Airport Extreme, make a wireless network and I have 3 Airport Express, to extend the network.

  the Airport Express Terminal 2 have connection whit Airport Extreme. The last of them is too far. The last of them can connect to one of the Airport Express 2 located in Pentecost Airport Extreme connection to expand further?

  Sorry, but no.  The distant Express which is too far can connect to one of expresses it airport who are already extending the network... so that it can be used for AirPlay or to connect a USB printer. .. .but the distant Express cannot "extend" the wireless network and provide additional wireless coverage.

  Ideally, your network could have AirPort Extreme, placed in a central location in the House, and each Express which extends the network would be located approximately the same distance from AirPort Extreme... and... ACH Express would be closer to the AirPort Extreme to another Express.

  If this is not possible, then you need to look at a wired Ethernet cable solution for at least one of the Express features, or an Ethernet Powerline solution if you cannot run the Ethernet cable.

• Extend the reach of the WiFi with airport Time Capsule and Airport Express

  I want to extend the range of my WiFi network running on a Time Capsule with an Airport Extreme airport. The Internet, ADSL, signal goes from the cable box in a closet and has two Ethernet cables connecting the box. I installed a simple Ethernet switch and ran inside, with both Internet cables Ethernet Miss and in two rooms in my apartment. I created the Capsule of time like the WiFi router, then the Express in the other room in Bridge Mode to extend the range of the WiFi network and enable AirPlay. This configuration works well for a while, but after a certain time has problems. The Express seems to go back to the creation of the WiFi network on its own and I saw the problem of the conflict addreses DCHP.

  What seemed to work correctly using the Express as the "pivot" and I fell straight Internet on it and an Ethernet cable to connect the Time Capsule in Bridge Mode. It's far from ideal for me, however, because I like the Express to be in another room to extend the range of the WiFi network in this part of my apartment and be able to use it for AirPlay.

  Help, please.

  If you could let us know what operating system you use on your Mac or PC, we'll give you a configuration suggested for the AirPort Express, which will allow the Express and the Time Capsule to connect to the Ethernet switch and perform correctly.

  We assume that the switch and the wiring will function properly in your current configuration, as well as the time Capsule, is that correct?