'Extend the poster' does not not in Windows 7

Similar Questions

• Extend the display does not - second black monitor

  I have a laptop Toshiba Satellite C655 and I connected a 2nd monitor in order to have two screens to work on.  The screen resolution is set to the optimum level for each monitor, I chose the option "Extend these screens" and each monitor is set to a different refresh rate.  However, the second monitor stays black.  If I click on "Identify", a number 1 appears on the screen of the computer, but nothing appears on the external monitor.  Even the mouse cursor does not appear when low-pressure on this screen. I checked for updated drivers, but Windows says I already installed the best drivers.

  If I go to "Duplicate the poster", the external monitor displays the desktop and the laptop screen is black.   I don't understand.  It was working fine yesterday, but today when I turned on, I'll have these problems.  I even tried plugging an external monitor that is completely different with the same results. Any help would be appreciated.

  I have a laptop Toshiba Satellite C655 and I connected a 2nd monitor in order to have two screens to work on.  The screen resolution is set to the optimum level for each monitor, I chose the option "Extend these screens" and each monitor is set to a different refresh rate.  However, the second monitor stays black.  If I click on "Identify", a number 1 appears on the screen of the computer, but nothing appears on the external monitor.  Even the mouse cursor does not appear when low-pressure on this screen. I checked for updated drivers, but Windows says I already installed the best drivers.

  If I go to "Duplicate the poster", the external monitor displays the desktop and the laptop screen is black.   I don't understand.  It was working fine yesterday, but today when I turned on, I'll have these problems.  I even tried plugging an external monitor that is completely different with the same results. Any help would be appreciated.

  Download (and install) the latest driver for all video player is installed in this laptop specific.  The manufacturer - not Microsoft.

• Extended the controller does not

  Hello
  
  I extended the controller attempted to call a pl/sql package and tried to insert data into a custom table. I have attached the controller through customization at site level. and moved the .class file to $JAVA_TOP. The page shows no error. I added a field on a page and try to save the data in a custom field.
  When I try to save the page it shows me a message that have been saved successfully! but the data are not are filled with custom table.
  
  
  Code central:
  
  package oracle.apps.ar.creditmgt.application.webui;
  
  import java.sql.Connection;
  import java.sql.Types;
  Import oracle.apps.ar.creditmgt.application.webui.OCMAddFinDataCO;
  Import oracle.apps.fnd.common.VersionInfo;
  Import oracle.apps.fnd.framework.webui.OAControllerImpl;
  Import oracle.apps.fnd.framework.webui.OAPageContext;
  Import oracle.apps.fnd.framework.webui.beans.OAWebBean;
  Import oracle.apps.fnd.framework.OAApplicationModule;
  Import oracle.apps.fnd.framework.OAException;
  Import oracle.apps.fnd.framework.OAViewObject;
  Import oracle.apps.fnd.framework.webui.beans.layout.OAQueryBean;
  Import oracle.jbo.Row;
  Import oracle.jbo.domain.Number;
  Import oracle.jdbc.driver.OracleCallableStatement;
  Import oracle.sql.CHAR;
  
  SerializableAttribute public class MANOCMAddFinDataCO extends OCMAddFinDataCO {}
  public MANOCMAddFinDataCO() {}
  }
  
  ' public void processRequest (OAPageContext oapagecontext, OAWebBean oawebbean)
  {
  super.processRequest (oapagecontext, oawebbean);
  
  OAViewObject oaviewobject3 = (OAViewObject) oapagecontext.getApplicationModule (oawebbean) .findViewObject ("CaseFoldersVO");
  If (oaviewobject3! = null)
  {
  Line row5 = oaviewobject3.first ();
  If (row5! = null)
  {
  Number of pCaseFolderId = (Number) row5.getAttribute ("CaseFolderId");
  oapagecontext.putTransactionValue ("CasefolderID", pCaseFolderId);
  }
  }
  OAViewObject oaviewobject = (OAViewObject) oapagecontext.getApplicationModule (oawebbean) .findViewObject ("creditAppFinancialDataVO");
  If (oaviewobject! = null)
  {
  Row1 row = oaviewobject.first ();
  If (row1! = null) {}
  Number of pFinDataId = (Number) row1.getAttribute ("FinancialDataId");
  oapagecontext.putTransactionValue ("FinDataID", pFinDataId);
  }
  }
  }
  
  ' Public Sub processFormData (OAPageContext oapagecontext, OAWebBean oawebbean)
  {
  super.processFormData (oapagecontext, oawebbean);
  }
  
  
  ' Public Sub processFormRequest (pageContext OAPageContext, OAWebBean webBean)
  {
  super.processFormRequest (pageContext, webBean);
  OAApplicationModule am = pageContext.getApplicationModule (webBean);
  OAQueryBean queryBean = (OAQueryBean) webBean.findChildRecursive ("OCMBtnLayOutRN");
  
  Apply chain = queryBean.getGoButtonName ();
  
  If (pageContext.getParameter ("Apply")! = null)
  {
  Integer pcaseFolderId = (Integer) pageContext.getTransactionValue("CasefolderID");
  Integer pfinDataId = (Integer) pageContext.getTransactionValue("FinDataID");
  String pSubDebt = pageContext.getParameter ("SubordinatedDebt");
  
  Connection Conn = pageContext.getApplicationModule (webBean) .getOADBTransaction () .getJdbcConnection ();
  Try
  {
  OracleCallableStatement cs = (OracleCallableStatement) conn.prepareCall ("start OCM_FIN_DATA_PKG. Insert_Fin_Data (: 1,: 2: 3:4); end; ») ;
  
  cs.setInt (1, pfinDataId);
  cs.setInt (2, pcaseFolderId);
  cs.setString (3, pSubDebt);
  cs.registerOutParameter(4,Types.CHAR);
  
  DSI Execute();
  
  Output = cs.getCHAR CHAR (4);
  
  DSI Close();
  If (outP.equals('S'))
  {
  throw new OAException ("Success");
  }
  else {}
  throw new OAException ("Failed to Insert");
  }
  }
  catch (System.Exception Exception)
  {
  throw new OAException ("connection error");
  }
  }
  }
  }
  
  Package:
  
  CREATE OR REPLACE
  OCM_FIN_DATA_PKG PACKAGE BODY
  AS
  
  PROCEDURE Insert_Fin_Data
  (
  p_finacial_id NUMBER,
  p_casefolder_id NUMBER,
  p_SubDebt NUMBER,
  x_status OUT VARCHAR2)
  IS
  
  BEGIN
  FND_FILE. PUT_LINE (FND_FILE. JOURNAL,' before insert: ' | p_finacial_id |'; Casefolder id :'|| p_casefolder_id |'; Subordinate debt :'|| p_SubDebt);
  INSERT
  IN MAN_OCM_FIN_DATA
  (
  Financial_data_id,
  Casefolder_Id,
  Subordinated_Debt
  )
  VALUES
  (
  p_finacial_id,
  p_casefolder_id,
  p_SubDebt
  );
  commit;
  x_status: = s ';
  FND_FILE. PUT_LINE
  (
  FND_FILE. NEWSPAPER, "inserted successfully.
  )
  ;
  EXCEPTION
  WHEN NO_DATA_FOUND THEN
  x_status: = 'E ';
  NULL;
  FND_FILE. PUT_LINE
  (
  FND_FILE. NEWSPAPER, "no data for p_finacial_id = ' | ' p_finacial_id |'; Casefolder id :'|| p_casefolder_id |'; Subordinate debt :'|| p_SubDebt
  )
  ;
  WHILE OTHERS THEN
  x_status: = 'E ';
  FND_FILE. PUT_LINE
  (
  FND_FILE. JOURNAL,' error related to the p_SubDebt - ' | p_finacial_id |'; Casefolder id :'|| p_casefolder_id |'; Subordinate debt :'|| p_SubDebt | ' ERR'. SQLERRM
  )
  ;
  END Insert_Fin_Data;
  END MAN_OCM_FIN_DATA_PKG;
  /
  display errors;
  
  
  Please tell me if there is an error in what I did. Please tell me why the data are not met in the custom table!
  
  I tried to run an anonymous block, and he succeeded!
  
  DECLARE
  x_sts VARCHAR2 (1);
  a NUMBER: = 11111;
  b NUMBER: = 22222;
  c NUMBER: = 33333;
  BEGIN
  MAN_OCM_FIN_DATA_PKG.insert_fin_data (p_finacial_id = > a, p_casefolder_id = > b, p_SubDebt = > c, x_status = > x_sts);
  dbms_output.put_line ('Status :'|| x_sts);
  EXCEPTION
  WHILE OTHERS THEN
  dbms_output.put_line (SQLERRM);
  END;.
  
  
  Please advice on how to move forward. I'm not able to debug as I only download pages stocked in my jdevloper.
  Please help about this
  
  Thank you
  Prakash

  Prakash

  Send me your code will check and update.

  Thank you
  AJ

• Win7, installed on the RAID1 does not work Windows Update and messneger (SID problem)?

  Hi, first of all the machine description

  OS: Win7 Pro 64 bit Original and new
  MB: ASUS P7H57D-V EVO
  Processor: Intel Core i7 860
  RAM: 4 x 2 GB Corsair XMS3 CMX4GX3M2A1600C9
  Graphics: Ati Radeon HD5670
  HARD drive: 2 x WD GP 1 TB - 1 x Seagate 1 TB

  Problem: a bit long to explain...
  I first tried to install the OS on a RAID1, so initially I set raid in the bios with the 2 WD1Tb, then I created the table and I started the installation.
  WIN DVD it recognises the table, it starts installing, it made the first reboot, when is close to finishing it gives an error that cannot complete the installation. I spent 10 days trying to solve the problem without result.
  So I decided to work around the problem, I installed the operating system on a single hard drive, then I cloned the HDD for the RAID1.
  Everything seems to go well but... Update Windows and MSN Messenger will not connect, as having a problem of equality SID.
  If I clone the installation of work, everything works on a different disk included WIN UPDATE and Messenger.
  Cloned on the table, right.
  The table is correctly recognized by WIN7, I downloaded the latest drivers from the Asus MB site, but the problem remains

  What can I try?

  Thank you to everyone

  If 'update of Windows and MSN Messenger' [AKA Windows Live Messenger] are not connected, the chances are it is a network problem. And then...

  1. what application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  2. If Win7 64 bits is pre-installed on the computer when you bought it, a free trial Norton or McAfee came preinstalled, too? (No matter if you have never used or activated).

  =======================================

  How will I know if my computer is up to date?
  http://Windows.Microsoft.com/en-us/Windows7/how-can-I-tell-if-my-computer-is-up-to-date

  How TO activate the automatic update enabled or disabled
  http://Windows.Microsoft.com/en-us/Windows7/turn-automatic-updating-on-or-off

  You can encounter errors related to connect temporary [e.g. 0x80072EFF 0x80072EFE 0x80072EFD; 0x80072EEF; 0x80072EE2; 0x80072EE7; 0xC80003FA; 0x8024402F] when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  How to reset the Windows Update components?
  -Online skip the section to APPLY to if Win7; Access KB971058 via Internet Explorer (32-bit) only. Run the difficulty in DEFAULT and AGGRESSIVE modes, then restart [1]
  http://support.Microsoft.com/kb/971058

  ~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list installed updates (Vista & Win7).

• Error 31: A device attached to the system does not work, Windows 7 host, c. 7.1.4

  Windows 7 host, Windows XP, Linux invited dare. Have tried every fix online, including the decommissioning of the upgrade and uninstall then reinstall. Nothing works. It was working and then stopped.

  The solution is:

  1. Close the workstation.

  2. Open the registry (Start > run > regedit).

  3. Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\hcmon\.

  4. Create a new key called settings.

  5. In settings, create a new DWORD value entry named DisableDriverCheck, and then set the value to 1.

  6 reboot

  This question seems to Windows 7 host. The fix worked on the few that I tried.

• Computer does not load Windows after reset after installing HP-J6413

  Bought J6413 all-in-one; the software that is installed according to the instructions on the CD.  Attempted to restart after the installation, the computer hangs upward after shooting intself on and display the logo of the motherboard, does not load Windows.

  Printer is off, did reset, everything was fine, Windows loaded etc.  Repeat the action and came to the conclusion that the power of the computer with the printer off left (it's a fax machine, it should be all the time) or even reset the onboard computer after, say, install new software, prevents the loading of Windows on them turn on the computer.

  Only possible mode of operation is to put off the printer, then turn off the computer, then turn on printer to serve fax standby and then do the same set of operations before turning to new computer.

  Please refer to the manuals that you received for your PC and disable the "USB Émulation" and "USB devices starting" the BIOS settings.

• Windows does not ACTIVATE WINDOWS can't

  PLEASE HELP ME!

  I did a restore and recovery backup because only my WINDOWS 8 stopped to update and gave me problems with speed. I did everything you can imagine. I even run the tweaking.com from windows to check for problems.

  Now the computer does not activate WINDOWS and gives me this message, please activate windows... I click top then says Windows can not be activated, please contact Microsoft Support.

  I have a question and problem and I really need to know how to operate. If I have to reset the computer and reinstall Windows (which hopefully livery) please let me know. At this point the computer is not activate windows and is a real problem

  I appreciate your response.

  Run a full scan with Malwarebytes and AdwCleaner , and then run file System check (SFC) Scan and repair the filesystem - Microsoft Community.

  Uninstall any antivirus bloatware, use built-in Defender.  Use the special tool to uninstall any inflated AV: uninstallers (removal tools) for common - antivirus ESET Knowledgebase software

  Tweaking registry cleaners and the suites (not counting as CCleaner) ruin Windows.

  I would try first to restore the system to a point where he was running better, or if it does not help then refresh or reset: How to refresh, reset, or restore your PC - Windows help

  As a last resort, you can follow this excellent tutorial to make an own 8.1 Windows Installer which puts the quality of installation in your own hands you and keep.  Just stay away from Tweaking suites, stick with integrated antivirus, Defender, keep everything off Startup tab in Manager tasks, watch your freeware installs like a Hawk of snitches, periodically scan with Malwarebytes and AdwCleaner

• installed the latest updates of windows 7... now the computer does not recognize my video files avi... says "format not supported".

  I have installed the latest updates (02/27/10) and when I open sony vegas to edit some files avi... they were offline... when I tried to read with windows media player it says format not supported... before when I played these files, they would not have to synchronize audio... it never happened with my other computer with Vista... system restore solved the problem of format not supported... but so far has caused this problem? and what about the problems of synchronization? the files seem to sync when played with the hp program...

  Hi derlonewolf,
   
  Because you performed a System Restore you would not be able to determine which update problem from occurring. You will have to wait for the update to your computer to determine the update that caused the problem. The update does not necessarily cause the problem to occur again. However, you can view the history of updates to updating history.
   
  1. open the control panel (all items view), and click the Windows Update icon.
   
  2. click on the link to view update history.
   
  3. to view the details of a single Windows Update-
   
  (A) select and right-click on a Windows Update list, and then click details.
   
  (B) click on close when finished.
   
  As far as the question of timing is concerened, you can scan SFC on your computer and check if the problem persists.
  
  Steps to perform a scan SFC:
   
  1. Click Start, click principally made programs, accessories, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow
   
  2. type the following command and press ENTER:
  sfc/scannow
  [The command sfc /scannow. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions.]
   
  A message appears indicating that "the system scan will start. Be patient, because the analysis may take some time
   
  3. If all the files require that a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue
   
  4. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.
   
  5. once the scan is finished, close the command prompt window, restart the computer and check.
   
  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833
   
  You can also make manual updates instead of automatic updates and then see what are updates will be installed on the computer.

  See : http://windows.microsoft.com/en-us/windows7/Turn-automatic-updating-on-or-off

  Post back with the status

   
   
  Aziz Nadeem - Microsoft Support

• App, opening a file via windows shell commands: "a device attached to the system does not work.

  Hello!

  I hope that someone here will be able to throw some lights on my question, if I post this is the wrong place please let me know because I was directed here (which forum? ). OK, I support and develop custom applications. An older application especially written in Delphi allows users to attached documents (pdf, jpg, txt, etc.) to the records of equipment in a data base. Later users can view these records of equipment and press a button to display the document.

  When the user presses the button to view the document, the application uses the folder variable to save the document to the temporary path and then asks windows via a shell command to open the file. The appeal of Delphi for windows used is the following:

  ShellExecute (GetDesktopWindow, 'open', PChar (TempFile), ",", SW_SHOWNORMAL);

  Normally this process works very well, we have had no problems so far. On a single computer (windows xp pro with Service Pack 3) belonging to a client, instead of opening the file, windows returns the system 31 error and the message ""a device attached to the system is not functioning. ". is displayed.

  * If I navigate to the location where the file is stored on the disk and try to open it, software adobe reader opens the file correctly.

  * I found some suggestions that the file extension is associated properly. PDF associated with Notepad, I changed, and the application could ask windows to open the file very well. Open the file from the location on the work of disc as well. Change the file for adobe and the problem persisted.

  * I reinstalled adobe reader software, but also a previous version of adobe and the problem persisted.

  * The application doesn't have any problem asking other files opened, only those associated with adobe reader on this same machine. The problem does not exist on other machines.

  That about sums up the problem. Any suggestion would be appreciated.

  Thank you

  Louis

  It was determined that the version of adobe reader was at fault.

• Windows Vista crashes and displays a screen saying "the program does not.

  original title: crashing Vista

  Hello

  My Vista PC crashes. I think it has something to do with the screen saver, memory, HARD drive or energy economy. The accident appears as frozen screen and sometimes the program says State "program does not. I have tried different tricks like turning off screen saver, change the setting for power, HARD drive always 'on '... But no changes have so far resolved the issues.

  I was not able to identify a single application or function as the source of my problems...

  My Vista works very well, but if a leave as the computer and screen saver starts or the computer screen will energy efficient, it will crash when I "wake up".

  I've updated the system and all the applications and drivers, but the system is still unstable and cannot be left for an extended period of time before this crash. As long as I'm working on the PC all works. If I leave my PC, I have to turn it off.

  H. Hansson

  Hello

  Did you change your computer?

  Method 1:

  Step 1:

  I suggest you check in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you are able to start your computer in safe mode, I suggest you perform the clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  To set up the computer in a clean boot, follow the steps in the link: How to perform a clean boot

  http://support.Microsoft.com/kb/929135

  Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.

  Method 2:

  I suggest you to see the link and check out the program does not.

  What does it mean when a program is not responding?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-does-it-mean-when-a-program-is-not-responding

  Method 3:

  I suggest to download and install the Microsoft safety scanner and run the scan and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  See also:

  Ways to improve your computer's performance

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-your-computers-performance

  Optimize Windows Vista for better performance

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

• Windows Update Standalone Installer returns "the update does not apply to your system" Installer MSI 4.5 [KB942288]

  MSI 4.5 is required to install some software on the sub system, Setup MSI 4.5 returns "the update does not apply to your system.

  Windows Server 2008 SP2 64-bit Standard

  sfc/scannow does return no problem

  CBS. JOURNAL

  2011-11-10 09:19:30, v6.0.6002.18005 Info CBS responsible Servicing Stack with Core: C:\Windows\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6002.18005_none_676975d87cc9b6e6\cbscore.dll
  2011-11-10 09:19:30, called CSI Info 00000001@2011/11/9:22:49:30.113 WcpInitialize (wcp.dll version 0.0.0.5) (battery @0x7feef748c85 @0x7fef2ef53ae @0x7fef2ec3ed1 @0xffb649a8 @0xffb630c9 @0xffb63578)
  2011-11-10 09:19:30, CBS News could not load SrClient DLL path: C:\windows\system32\srclient.dll.  Continue without the system restore points.
  2011-11-10 09:19:30, called CSI Info 00000002@2011/11/9:22:49:30.116 WcpInitialize (wcp.dll version 0.0.0.5) (battery @0x7feef748c85 @0x7fef2f386cf @0x7fef2f125d9 @0x7fef2ec3feb @0xffb649a8 @0xffb630c9)
  2011-11-10 09:19:30, called CSI Info 00000003@2011/11/9:22:49:30.117 WcpInitialize (wcp.dll version 0.0.0.5) (battery @0x7feef748c85 @0x7fef74f838d @0x7fef74f84ba @0xffb64207 @0xffb63125 @0xffb63578)
  2011-11-10 09:19:30, CBS NonStart info: check to ensure the treatment of start-up was not necessary.
  2011-11-10 09:19:30, info CSI 00000004 IAdvancedInstallerAwareStore_ResolvePendingTransactions (call 1) (flags = 00000004, progress = NULL, phase = 0, pdwDisposition = @0x12df8d0)
  2011-11-10 09:19:30, CBS NonStart info: success, start, treatment not required, as expected.
  2011-11-10 09:19:30, info CSI CSI 809616 (0x00000000000c5a90) store initialized 00000005
  2011-11-10 09:19:30, CBS briefing: initialized 30187313:3612201472.
  2011-11-10 09:19:30, CBS information session: 30187313:3612201472 finalized.  Reboot required: no
  2011-11-10 09:21:33, CBS Session info: initialized 30187314:546129020.
  2011-11-10 09:21:33, CBS Session info: 30187314:546129020 finalized.  Reboot required: no
  2011-11-10 09:23:35, CBS Session info: initialized 30187314:1775756314.
  2011-11-10 09:23:35, CBS Session info: 30187314:1775756314 finalized.  Reboot required: no
  2011-11-10 09:25:38, CBS Session info: initialized 30187314:3005403140.
  2011-11-10 09:25:38, CBS Session info: 30187314:3005403140 finalized.  Reboot required: no
  2011-11-10 09:27:37, CBS Session info: initialized 30187314:4186893820.
  2011-11-10 09:27:37, CBS Session info: 30187314:4186893820 finalized.  Reboot required: no
  2011-11-10 09:27:43, CBS Session info: initialized 30187314:4247657872.
  2011-11-10 09:27:43, CBS Session info: 30187314:4247657872 finalized.  Reboot required: no
  2011-11-10 09:29:30, CBS info trap: package store indicates there is no element to clean, to jump.

  Advice please.

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  Hope that helps.

• Windows 7 Ultimate lights up and the screen does not display on my screen

  The title says it all.

  Hi Brandon,.

  Thanks for posting your query in Microsoft Community.

  It is regrettable that the PC does not turn on and I'll be happy to answer your query. Let me ask you a few questions to help you accordingly.

  • What is the brand and model of the computer?
  • Remember to no particular change in the computer before the show?
  • When was the last time you were able to use the PC?
  • Do you have Windows 7 repair disc?
  • Do you have connected an external device to the computer (except keyboard and mouse)?
  • When you try to start, you are able to display the logo of the manufacturer?
  • You are able to start the computer in safe mode?

  There could be several reasons according to the questionnaire above for this issue, including hardware as well. Hardware and software configurations can vary considerably, there are several ways that you can take to solve problems that might prevent Windows to start (boot) correctly.

  I ask you to follow the steps described in the article below:

  What to do if Windows does not start correctly (information valid for Windows 7)

  Notes: Please, don't try installing and reinstalling Windows section from now.

  Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed after this date are deleted.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• I just installed windows 7 ultimate 64-bit on my laptop dell inspiron 1501. Now the scrolling does not work on my touchpad. Any ideas.

  I just installed windows 7 ultimate 64-bit on my laptop dell inspiron 1501. Now the scrolling does not work on my touchpad. Any ideas.

  Try the web site of Dell for Win 7 drivers. There may be some here. If it does not exist, you might have to wait until the public release before Dell post...   Mike Hall MVP - Windows Experience http://msmvps.com/blogs/mikehall/

• Windows live mail send error "the server does not support an SSL connection. Server error 250.

  Original title: Windows live mail error send

  Cannot send mail to Windows Live Mail.  Error message... The server does not support an SSL connection. Server error 250. Server - * address email is removed from the privacy *. Windows Live Mail error ID - 0x800CCC7D. SMTP Protocol.  Port 25.

  It's better, thank you. This message is not from the BT Server; It comes from your Avast antivirus which is intercepting your mail. You would be well advised to turn off the Avast Mail shield; It does not add any additional security if you don't by attention elsewhere, and can cause problems.

  I see that it is the record of mail in bulk that because of the problems in this case. Connect to the Web e-mail account and clear the items junk and deleted records.

  BT is recommended to use SSL, but your original question indicated that SSL was not taken in charge for SMTP on port 25. I think we'd better go on all your settings. Recommendations of BT are on this page: BT email: what are the settings for outgoing and incoming mail servers?, but they only work if you disable Avast scanning mail.

  Right-click on the account name in the folders pane, and then select Properties.

  • Under the servers tab, make sure that my server requires authentication is selected.
    Select connect with authentication in clear text.
  • On the Advanced tab, select this server requires a secure connection (SSL) for both servers.
    Make sure that the incoming (IMAP) port is 993 and port for outgoing (SMTP) is 465.

  When you've made all these changes, close Windows Live mail and wait five minutes for the program do its cleaning and save the modified settings. Then, restart the computer and make sure that the Mail of Avast shield is always off.

  Launch Windows Live Mail, then dial a new test message and send it to yourself. Post a new message in your response.

• The mouse does not work on a few screens in windows 7

  Hello team
  I'm using a windows 7 64 Bit OS. My mouse has stopped working on a few pop - up screens.

  Steps to reproduce:
  Start > Control Panel > program > Java > a pop up appears and my mouse does not work on it.

  This is just one example.

  The same happens when I use Oracle EBS. The mouse does not work on the pop-up forms of oracle.

  Can anyone help.

  Thank you
  -

  Hi NagaKotagiri,

  To provide the proper resolution, I would need more information on your side.

  What is the number and the model of the computer and the mouse?

  This problem can occur because drivers damaged or incompatible, lack of updates, the incorrect device settings or hardware problems.

  I suggest you try the procedure described in the article and see if it helps.

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-in/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  Check out the link for more information.

  Change the settings of the mouse
  http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settings

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.