Extension Manager no longer shows applications after update to 7.3.2.39.

Similar Questions

• The extensions Manager no longer works

  HI -.

  While my extensions always seem to be available in Dreamweaver CS4, the extensions Manager no longer works. He started, but no window never appears. This is the case if I get into Dreamweaver, run it independently or click on an extension, I like to get updated. I would appreciate any information on what can cause this problem and how it can be solved.

  I tried to uninstall the extensions with the uninstaller application manager, but the box for the extensions Manager is gray and I can't select it. If I click on select all and then uncheck the apps that I don't want to touch, the extension manager is also deselected. The only way to keep selected is if I leave also Fireworks, Illustrator, and InDesign selected. But all these applications uninstalling seems to be a radical alternative. If I trash manually the extensions Manager, I can't select it in the CS4 Installer. No doubt that I have to uninstall the other three applications and reinstall them in the same time, I have reinstall the extensions Manager. There is obviously some dependencies between these four apps, but uninstalling and reinstalling all are a lot of work to get to a solution that may not even work.

  Thank you very much.  He was in fact not the .plist file which has been mentioned here, but what I found, it was two folders more deep adobe/Extension Manager2 / exman_uiPreferences.xml who had the position of extension manager -950 and when I changed this line of XML to a positive number, my extension manager then open on my main screen again.  Thank you for your help.  The extension manager should be closed until the change is made to the XML file that I found out he's going to rewrite the file with the old numbers, if it is already open when you close it.

  Rich

• I was not able to open my my Adobe Illustrator application after update. He says there are a few problems with the preference but after following the instructions, Illustrator still does not work and it keeps giving the samei question. Help, please.

  I was not able to open my my Adobe Illustrator application after update. He says there are a few problems with the preference but after following the instructions, Illustrator still does not work and it keeps giving the samei question. Help, please.

  I think you are talking after upgrade to CC 2015 you're not able to launch I. Also, I believe you speak for read only matter of preference.

  After following the instructions please do not launch Illustrator and check your file preference if the permissions have been set correctly. A good way would be to get inside the preferences folder and then try to create a file manually. If it succeeds, please write to [email protected]

  A few external links to help you set permissions:

  MAC

  OS X Yosemite: set permissions for items on your Mac

  WIN

  Set, view, change, or remove permissions on files and folders

  r-and-file-permissions/465f2b42-63dd-4486-8dd1-c870290efeed http://Answers.Microsoft.com/en-US/Windows/Forum/windows_vista-Files/How-do-i-change-folde

  Kind regards

  Ashutosh

• Extension Manager no longer work after the update CC 2015

  Anyone else having this problem?

  After update the CC until 2015, the extension manager is empty and does not list any Adobe applications.

  Trying to double-click an extension gives notice that no apps are installed.

  On a Macbook Pro running Yosemite.

  the extension manager is no longer supported by adobe, Adobe Exchange:

  We wanted to let you know that our plans now in order to have time to use alternatives to the handler extensions, described below. The extension manager will continue to be available as a free web download in different versions with various creative office application compatibility up to 2014 CC version . In addition, the final version of the CC extensions Manager will be available through the creative application of Cloud in the foreseeable future.

  Options of & next steps

  If you are a developer or a producer of Adobe Exchange, the following options are available:

  • You can distribute your products through the Adobe add-ons Web site. Add - ons can be distributed to the public (free or paid) or private (free for named users), learn more about the products of sharing private
  • If you want to continue to sell through your own Web sites or through other channels extensions, you can build your own installer or provide instructions to your users to use the command line functionality extensions Manager to install your extension. The extensions Manager command line tool is available for download at the following links:
    • Windows
    • Mac

  If you are a user, the following options are available:

  • Acquire extensions, plug-ins and other content using the Adobe add-ons Web site.
  • Contact the developer of your extension and ask that he or she creates an installer for it.
  • Users and businesses that are unable to use creative application Cloud or Adobe modules can use the extensions Manager command line tool , install and remove your extensions. The command-line tool has been updated to support the next major release of the creative cloud, v. 2.1.1.110.

• IOS app showing "disconnected" after update to IOS 9.3.2

  Well, it seems that I can access is no longer my actions on my iPhone after updating to IOS 9.3.2,and the app shows my NAS as 'Online', but the actions all show "disconnected." If I'm on WIFI it connects fine and shows "connected (LAN)" cell data are enabled for the application and the NAS server is online, just won't access actions while on cell phone. I guess this is a new problem and we have to wait for an update of the app? Sucks that I have to be on WIFI to access my actions to my phone. Desktop application works very well. Someone at - he found a work around for this?

  I was finally able to fix it by going into the tab 'Cloud' on the NAS by clicking on the button "Exit" to cancel my account, signing of the computer desktop and the IOS app, then go to http://readycloud.netgear.com/client/index.html#page=discoverdevices to register a new account with a different email address, even used the same password. Then come back to the NAS to turn on and connect to the cloud and finally sign with the new account on the IOS app. It worked and I can now access all my actions on IOS other networks. Don't forget to turn off the wifi on your phone while doing this, he has to connect through the network of cells and no premises. I guess the old account is deleted when I removed it, otherwise it is now sleep.

• The CC extensions Manager does not show installed products

  I try to install and Add on, but none of my products are displayed in the extensions Manager. I am running CC2015 and installed the correct extensions Manager and tried to uninstall and reinstall Illustrator, but in the extensions under Product Manager there are only 'other' and not listed. How can I get the extensions Manager to recognize my products so I can install the necessary extension?

  Delete the file OPM.db and reconnection in the desktop application of creative cloud using the Adobe ID associated with your subscription.

  • Mac OS: You can locate the file OPM.db in the \User\\Library\Application Support\Adobe\OOBE folder. To access the hidden user library folder, see library user access hidden files. Mac OS 10.7 Lion.
  • Windows: You can locate the file OPM.db in the \Users\\AppData\Local\Adobe\OOBE folder.  To show the hidden AppData folder, see display files, folders, file name extensions. Windows XP, Vista, Windows 7.

• In all video Applications after update by 2014 CC Big Trouble

  After updating my CC to CC (2014), video-Applications (Pl, Pr, Sg, me) does not work.

  Other applications (Ps,...) are ok. AE starts, but it works very badly.

  PL, Pr, Sg, myself does not start.

  Really tested this software until you have published it?

  I'm working on OSX 10.9.3 with Blackmagic video-Hardware. German version.

  now, I find the right answer:

  fix the permissions problem that prevents starting applications Adobe | After the effects of interest area

  Problems starting CC 2014: Adobe Premiere Pro

  It is important to define all THE NAMES to read/write!

  now it works very well on my machine :-)

• How can I reinstall Acrobat if Application Manager indicates that the application is updated, but is absent?

  I uninstalled Acrobat 11 using the uninstall program, and now I can't reinstall because the Application handler specifies that the application is actually updated. The application went from my hard drive and all files of application support disappeared as well. How is - this application manager is considering the application is still installed? Is there a way I can download without the application manager?

  Hello

  I was able to run this: http://www.adobe.com/support/contact/cscleanertool.html

  Needed to ensure that 'ALL' has been selected in the menu drop-down to make sure that Acrobat has shown in the list. Removed and managed to install.

• EDGE OF THE ANIMATED FILES NO LONGER AUTOMATIC READING AFTER UPDATE!

  That's happened? Since installing the obligatory toold, update this morning EDGE ANIMER FILES will BE No. LONGER AUTOPLAY AFTER update! This is crucial, I have direct client work that is affected by this!

  Please answer Adobe, edge and oam HTML5 files are a new feature in fantatastic, but you just put a spanner in the works with this new update. Help please!

  We have confirmed there is a problem with the content hosted by the iframe with the v25 tools. It is, unfortunately, the mechanism used to place files .oam. As mentioned above, a possible workaround is to create a framework and then use Control Panel overlay of the web to a folder with your output Edge animation, instead of putting a file .oam.

  Thank you

  Neil

• Added Yahoo Toolbar and Add-ons Manager no longer shows the extensions one I can't access the function "get addons".

  I added a Yahoo toolbar for Firefox that has been customized for Frontier Communications. I Ghostery installed as an add-on, and she flashed a message that Yahoo toolbar confused its effective functioning and I would like to disable or uninstall the toolbar. I open the Add-ons Manager to do and much to my surprise he now showed no extension at all, but they all seemed still works! All my plug-ins appear when I look on the Add-ons Manager. I checked the "Get function modules and it tries to load but does not succeed." I am running Firefox 10.0.2.

  Please also try to delete the extensions.* files in the right out of the Firefox profile folder. Firefox will recreate the files and information. Please note that at the next startup, Firefox can request permissions, opening several tabs with each tab corresponds to a detected extension. Select allow the installation, click continue, but click on restart only on the last tab. You can also try to leave out the suspects without selecting modules and continue. I hope it will solve the problem.

  Files & Firefox profile folder

  Another way would be to try a new profile. Firefox stores the data from profile/personal separately from its installation folder. If the new profile is correct, you can later copy/replace files of the old profile in it, for example. the places.sqlite who holds history + information of favorites, the folder of bookmarks which has backups dated only bookmarks, signons3.txt + signons.sqlite which are necessary to restore successfully a saved website names to user/passwords etc. Please note that in this case, although it is also possible to copy the extensions it may be preferable to install again via Tools > Modules search box or AMO.

  Profiles Howto

• I can not select Windows 8.1 upgrade and other applications after update system

  I just refreshed my laptop Windows 8.1 after that that he returned to Windows 8... I opened the store and I can't select Windows 8.1 upgrade and other applications. What can solve this problem?

  Hey Kevin,

  If you bought your laptop with Windows 8, and she had a recovery partition, it would reset to Windows 8 when you want to run a system to refresh. This also applies if you have performed the update system using a disk installation or recovery of Windows 8. You mentioned that you are now unable to update Select 8.1 of Windows update, the Windows store.

  The Windows 8.1 update is not listed? Or you can not face problems with the update 8.1 for Windows from the Windows store?

  If you are facing the issue later, what happens when you click on the update of Windows 8.1 in Windows store? An error message appears?

  You also mentioned that you can not store of Windows other apps? What happens when you try to install?

  If you are unable to find the Windows 8.1 update in the Windows store, try the steps suggested in this article and checking:

  http://Windows.Microsoft.com/en-us/Windows-8/why-can-t-find-update-store

  If you are unable to install the update Windows 8.1 displayed in store Windows, then try these steps and check:

  First of all, make sure that you have installed all the Windows updates available, including 2871389 KB and KB 2917499.

  Method 1:

  Run the Windows update troubleshooting utility which can automatically detect and fix most of the incorrect settings that could cause problems with the download of updates. See the following steps:

  1. Press the Windows key + F to bring up the Search bar charms.
  2. Type of Troubleshooting and press enter; Click the tab settings , under the search box.
  3. Click on the tile to find and fix the problems and then click on the button show all the left pane.
  4. Click the Windows update troubleshooting tool and run it.

  Method 2:

  If the problem persists, disable any third-party antivirus software that you may have installed temporarily and check.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

  If the problem persists, start your computer in a clean boot state, and then try to install Windows 8.1. Start your computer in a clean boot state, you can reduce conflicts between software and help identify the root cause of the problem. You can read this article for more information:

  http://support.Microsoft.com/kb/929135

  Note: after the resolution of the problem, reset the computer to start as usual. Refer to the step How to configure the computer to start as usual after a boot minimum troubleshooting under more information.

• System installation disk application after update

  I updated my vista... now ask for instalation disc... i don't have that... like my laptop came not with a... .to pre-installed... I do not have a Disc to boot or recovery... never had the chance to do a...

  now my computer is completely useless...

  original title: I updated my vista... now ask for instalation disc... i don't have that... like my laptop came not with a... .to pre-installed... I do not have a Disc to boot or recovery... never had the chance to make a

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do recovery disk/s of the recovery Partition in case of hard drive failure or System Crash, when it is up and runniong again.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon. Mick Murphy - Microsoft partner

• Windows 7 Ultimate does not show wallpaper after update in Vista Business

  I did the upgrade from Vista business to Windows 7 Ultimate and cannot make a wallpaper of work. I can select only solid colors, but not images or slideshows. I googled for similar problems and it seems people offer various solutions, including through 0 to some attributes of registry related to Active Desktop under HKLM or HKCU Software / Microsoft / Windows / CurrentVersion / policies... And also checking / unchecking a few boxes that appear under easy access control panel, but nothing seemed to help. So I'm a bit lost and it's pretty depressing always focus on the black background, knowing tones of beautiful images are waiting for show it :(
  Can anyone suggest what can be done in this case? New - only full office colors can be changed at this point...

  I finally thought to myself... I don't know which two actions helped, but here's what I did:

  1. I made an order of setwallpaper default under various graphic files pointing to Windows Photo Viewer CLSID extensions (before they were pointing to a different CLSID, which I believe was Office Fax Viewer - {ff609cc7-d34d-4049-a1aa-2293517ffcc6}). Here's how I did it:

  -In RegEdit, I searched "wallpaper" and under HKCR\SystemFileAssociations, he found several extensions (.bmp, .jpg, etc) where I swapped the value for a key 'HKEY_CLASSES_ROOT\SystemFileAssociations\.bmp\Shell\setdesktopwallpaper\Command\DelegateExecute' of {ff609cc7-d34d-4049-a1aa-2293517ffcc6} to {FFE2A43C-56B9-4bf5-9A79-CC6D4285608A}

  - Then he found similar key under HKEY_LOCAL_MACHINE - their values were already set to {FFE2A43C-56B9-4bf5-9A79-CC6D4285608A}, but it won't hurt to check

  2 then I removed the registry key "HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\Control Panel\Desktop\Wallpaper". This key has an empty value - so I assumed that there is not much use and then shortly after I did it I got my wallpaper of the theme chosen.

• HP compaq has acer applications after update...

  Hi, I have a hp compaq that comes with a windows preinstalled 8. After awhile, I accidentally delete the recovery disk

  made me impossible to update or reset my pc. I then create a recovery drive on my external hard drive to an Acer running windows 8 also

  I then update my pc from this recovery external drive, I created that when finished I found my hp compaq acer applications and other applications does not. Please help I don't know what to do.

  Hello

  If you really Acer programs on the system, then someone must have written too

  the partition recovery or your backup on a disk from Acer. Check with HP support which

  can provide a disk for Installation of Windows 8 so that you can successfully install Windows so it

  can be updated or reset if necessary. The media should be at low cost since you already
  Clean Windows.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• computer doing unusually long closing down after update

  I did a windows update on my lap top and connected off the coast to stop as instructed and 2 hours later it's still display on the screen that it stops

  Hi Joe36,

  This problem can occur if updates failed to install.

  Given that the system stops not for a long time, you can try to restart the computer and check.

  Method 1:

  If you are unable to boot into normal mode, you can try the steps in the following article to perform a restore of the system by a safe mode or boot from the Installation of Windows Vista disk full versiom and check.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  Method 2:

  Step 1:

  When you are able to boot into normal mode, you can check that the windows update history to see if recent updates could not be installed.

  See the Windows updates are installed

  Step 2:

  If so, you can try to install the stand-alone update package.

  a. to download updates from the Microsoft Download Center

  b. Enter the item number in the field search and download the same.

  c. double-click on the downloaded file.

  d. click on run and follow the wizard to install it.

  Hope this information is useful.